[Risolto] [Xorg] Aiuto!!! Risoluzione Jaunty

[giusn93]

ah, sono riuscito ad impostare la risoluzione a 1152x864. GRAZIEEEEEEEEEEE  ANCORA!!!! ;

[giusn93]

no vabbè avevo già fatto... GRAZIEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE non so come ringraziarvi. Ma perchè diavolo non funziona guidance, kde-guidance e displayconfig-gtk su JAUNTY???

[telperion]

no vabbè avevo già fatto... GRAZIEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE non so come ringraziarvi. Ma perchè diavolo non funziona guidance, kde-guidance e displayconfig-gtk su JAUNTY???

Lasciamo perdere i tool di cacca di Ubuntu, è sempre stato un inferno dalla 8.04 in avanti settare la risoluzione su Ubuntu, conserva il file xorg.conf che ti servira in caso di reinstallazioni successive o prossime versioni.

Ultima verifica, prova a riavviare e vedi se la risoluzione viene mantenuta.

PS
risolto lo devi mettere nel primo post della discussione
 

[giusn93]

giusto. Grazie ancora. Hai un gran bel xorg.conf, non c'è che dire!!! Perdonami ma sono un noob di questo forum.
... sei grande!!!

[telperion]

giusto. Grazie ancora. Hai un gran bel xorg.conf, non c'è che dire!!! Perdonami ma sono un noob di questo forum.
... sei grande!!!

Quello non è il mio, ne ho creato uno generico con nvidia-settings e lo ho adattato.
 

Il mio se interessa è questo

Codice:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Feb 26 23:38:46 PST 2007

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

# path to defoma fonts
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/75dpi"
    FontPath        "/usr/share/fonts/X11/100dpi"
    FontPath        "/usr/share/fonts/corefonts"
    FontPath        "/usr/share/fonts/X11/cyrillic"
    FontPath        "/usr/share/fonts/default"
    FontPath        "/usr/share/fonts/encodings"
    FontPath        "/usr/share/fonts/liberation-fonts"
    FontPath        "/usr/share/fonts/OTF"
    FontPath        "/usr/share/fonts/Speedo"
    FontPath        "/usr/share/fonts/truetype"
    FontPath        "/usr/share/fonts/TTF"
    FontPath        "/usr/share/fonts/ttf-bitstream-vera"
    FontPath        "/usr/share/fonts/X11/Type1"
    FontPath        "/usr/share/fonts/util"
    # FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "dbe"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "vbe"
    # Disable        "dri"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "it"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "Emulate3Buttons" "true"
EndSection

Section "Monitor"
    Identifier     "Philips 190S"
    HorizSync       30.0 - 82.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
    # aggiunta da me
    DisplaySize    338    270    # 1280x1024 96dpi
    #ption "DPI" "85 x 86"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ACI ASUS VW220"
    HorizSync       30.0 - 82.0
    VertRefresh     50.0 - 75.0
EndSection


Section "Device"
    Identifier     "GeForce 8600 GT"
    VendorName     "NVIDIA Corporation"
    Driver         "nvidia"
    # Driver  "nv"
VideoRam 512
# Option "UseFBDev" "true"
Option "AddARGBGLXVisuals" "True"
#
    Option         "TVOutFormat" "SVIDEO"
    Option         "TVStandard" "PAL-B"

EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "GeForce 8600 GT"
    #Monitor        "Philips 190S" # philips

    Monitor        "Monitor0"

    #
    # Option         "AllowGLXWithComposite" "True"
    # Option         "AddARGBGLXVisuals" "True"
    #

    DefaultDepth    24

#    Option         "metamodes" "CRT: 1280x1024_60 +0+0; CRT: 1280x1024 +0+0; CRT: 1152x864 +0+0; CRT: 1024x768 +0+0; CRT: 832x624 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0" " # philips
    Option         "TwinView" "0" # asus
    Option         "TwinViewXineramaInfoOrder" "CRT-0" # asus
    Option         "metamodes" "CRT: 1680x1050_60 +0+0; CRT: 1280x1024 +0+0; CRT: 1152x864 +0+0; CRT: 1024x768 +0+0; CRT: 832x624 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"  # asus

    SubSection     "Display"
        Depth       24
        # Modes      "1280x1024" "1024x768" "800x600" "640x480" # philips
    EndSubSection
EndSection

Section "Extensions"
     Option         "Composite" "Enable"
EndSection


Section "ServerFlags"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"

# Option "AutoAddDevices" "False"
Option "DontZap" "False"
EndSection

[frank2]

Scusate se mi intrometto in questa discussione ma ho bisogno di aiuto.
Non riesco a mantenere le impostazioni alla scheda video. Il monitor me lo setta a 1024X768 mentre deve essere 1680X1050.
Da tempo che seguo varie guide ma non sono ancora riuscito a far mantenere la configurazione a 1680X1050.
La scheda video che utilizzo è una FeForce 8400 GS
Il monitor è un 24 pollici HP w2228h
La versione di Xorg è:

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux luisa-desktop 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 i686
Build Date: 09 April 2009  02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd)
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.

La versione del driver Nvidia é:

NVRM version: NVIDIA UNIX x86 Kernel Module  180.44  Mon Mar 23 14:59:10 PST 2009
GCC version:  gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4)

Spero che mi aiutiate.
Ringrazio anticipatamente per le risposte che mi vorrete dare.
Saluti, Franco

[Jack_ut]

Non so se hai letto, poco più su

Per modificare le impostazioni devi usare nvidia-settings

Codice:

sudo nvidia-settings

Se lo vuoi fare a manina

Codice:

sudo gedit /etc/X11/xorg.conf

e modifichi il tuo xorg.conf in questa parte

Codice:

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "metamodes" "1152x864 +0+0;"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Perchè le modifiche vengano mantenute devi essere amministratore. Apri un terminale (applicazioni/accessori/terminale) e digita

Codice:

sudo nvidia-settings

apporti le modifiche, salvi e questa volta la risoluzione non dovrebbe cambiare più. Per sicurezza riavvia e vedi se è tutto ok, ciao

[frank2]

Ciao, jack_ut, grazie per avermi risposto.  
Prurtroppo non sono riuscito.
Per comploetezza, ho copiato il contenuto del file xorg.conf che gentilmente ti ha postato telperion, apportandole ulteriori modifiche che ti ha suggerito in merito a:

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "metamodes" "1152x864 +0+0;"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Solo che io, anzichè 1152X864 +0+0;"  - ho modificato in 1680x1050 +0+0;" ed ho salvato il file xorg.conf.
Ho poi ho invocato il comando

sudo nvidia-settings

ho salvato, riavviato e la risoluzione mi va a 1280X1024      

Scusami se approfitto della tua esperienza ma sto tentando di utilizzare tutti i mezzi per usare i driver della casa costruttrice della scheda video.

P.S.
Ora il mio file xorg.conf è questo:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@palmer)  Sun Feb  1 20:21:04 UTC 2009


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "HP w2228h"
    HorizSync       24.0 - 83.0
    VertRefresh     48.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400 GS"
    Option         "AddARGBGLXVisuals" "True"
EndSection

Section "Screen"

# Removed Option "metamodes" "1680x1050_60 +0+0;"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050_60 +0+0; 1680x1050 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

[Jack_ut]

Prova ad impostare lo xorg.conf con l'utilità "nvidia-xconfig".

Da terminale

Codice:

sudo nvidia-xconfig

poi riapri "nvidia-settings"

Codice:

sudo nvidia-settings

reimposti la risoluzione e salvi "save to x configuration file".

Riavvia e vedi se va, fammi sapere

[frank2]

sudo nvidia-xconfig

Ok

sudo nvidia-settings

Nel terminale mi escono sempre questi errori:

ERROR: Unable to assign attribute BlueGamma specified on line 45 of
       configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).
ERROR: Unable to assign attribute DigitalVibrance specified on line 46 of
       configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).
ERROR: Unable to assign attribute GPUScaling specified on line 47 of
       configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).
ERROR: Unable to assign attribute XVideoTextureBrightness specified on line 48
       of configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).
ERROR: Unable to assign attribute XVideoTextureContrast specified on line 49 of
       configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).
ERROR: Unable to assign attribute XVideoTextureHue specified on line 50 of
       configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).
ERROR: Unable to assign attribute XVideoTextureSaturation specified on line 51
       of configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).
ERROR: Unable to assign attribute XVideoTextureSyncToVBlank specified on line
       52 of configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).
ERROR: Unable to assign attribute XVideoSyncToDisplay specified on line 53 of
       configuration file '/home/luisa/.nvidia-settings-rc' (no Display
       connection).

contestualmente si apre l'editor grafico nVidia, vado a settare la risoluzione a 1680x1050 60Hz, clicco su "save to x configuration file", lo salva, riavvio la sessione e sono nuovamente alla risoluzione 1280x1024.   

[frank2]

Da terminale xorg.conf, ogni volta che faccio la procedura che ho appena descritto sopra, mi aggiunge una riga nella sezione screen, quelle precedute dal segno # (cancelletto)

Section "Screen"

# Removed Option "metamodes" "1680x1050_60 +0+0;"
# Removed Option "metamodes" "1680x1050_60 +0+0; 1680x1050 +0+0"
# Removed Option "metamodes" "1680x1050 +0+0; 1680x1050_60 +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050_60 +0+0; 1680x1050 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

[Jack_ut]

Prova a fare così

Da terminale

Codice:

sudo rm /home/luisa/.nvidia-settings-rc

e riprova

Da terminale

Codice:

sudo nvidia-xconfig

poi riapri "nvidia-settings"

Codice:

sudo nvidia-settings

reimposti la risoluzione e salvi "save to x configuration file".

Edit:
le righe precedute dal # non vengono "eseguite", le puoi lasciare così come sono o cancellare.

[frank2]

Ho fatto come mi hai suggerito, di seguito ti posto i comandi eseguiti nel terminale così mi puoi seguire più da vicino.   

l

uisa@luisa-desktop:~$ sudo rm /home/luisa/.nvidia-settings-rc
[sudo] password for luisa:
luisa@luisa-desktop:~$ sudo nvidia-xconfig

Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

luisa@luisa-desktop:~$ sudo nvidia-settings
luisa@luisa-desktop:~$

ho fatto i settaggi a 1680x1050, li ho salvati "save to x configuration file, ho cliccato su esci, ho confermato e poi ho riavviato la sessione. La situazione non è cambiata, 1280x1024 

[Jack_ut]

Posta il tuo xorg.conf attuale e vediamo cosa dice, poi posta anche

da terminale

Codice:

cat /var/log/Xorg.0.log

Tentiamo di capire qualcosa in più

[frank2]

xOrg.conf:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@palmer)  Sun Feb  1 20:21:04 UTC 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Mon Mar 23 15:33:27 PST 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
    Load           "v4l"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "HP w2228h"
    HorizSync       24.0 - 83.0
    VertRefresh     48.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400 GS"
EndSection

Section "Screen"

# Removed Option "metamodes" "1680x1050_60 +0+0;"
# Removed Option "metamodes" "1680x1050_60 +0+0; 1680x1050 +0+0"
# Removed Option "metamodes" "1680x1050 +0+0; 1680x1050_60 +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050_60 +0+0; 1680x1050 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

cat /var/log/Xorg.0.log
luisa@luisa-desktop:~$ cat /var/log/Xorg.0.log

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux luisa-desktop 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 i686
Build Date: 09 April 2009  02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd)
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 18 17:39:05 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
   built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@2:0:0) nVidia Corporation GeForce 8400 GS rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x??/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Server Extension
(II) NVIDIA GLX Module  180.44  Mon Mar 23 15:29:02 PST 2009
(II) Loading extension GLX
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
   compiled for 1.5.99.3, module version = 0.1.1
   ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Video Driver
(II) v4l driver for Video4Linux
(II) NVIDIA dlloader X Driver  180.44  Mon Mar 23 15:05:32 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02@00:00:0
(WW) Falling back to old probe method for v4l
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1680x1050_60 +0+0; 1680x1050 +0+0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G86) at PCI:2:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.42.00.39
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8400 GS at PCI:2:0:0:
(--) NVIDIA(0):     HP w2228h (DFP-1)
(--) NVIDIA(0): HP w2228h (DFP-1): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): HP w2228h (DFP-1): Internal Single Link TMDS
(WW) NVIDIA(0): The EDID for HP w2228h (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "720x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (24.000-83.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (15.7 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "720x480".
(WW) NVIDIA(0): The EDID for HP w2228h (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "720x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (24.000-83.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (15.7 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "720x480".
(WW) NVIDIA(0): The EDID for HP w2228h (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (24.000-83.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (15.6 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "720x576".
(WW) NVIDIA(0): The EDID for HP w2228h (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (24.000-83.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (15.6 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "720x576".
(WW) NVIDIA(0): The EDID for HP w2228h (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "720x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (24.000-83.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (15.7 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "720x480".
(WW) NVIDIA(0): The EDID for HP w2228h (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "720x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (24.000-83.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (15.7 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "720x480".
(WW) NVIDIA(0): The EDID for HP w2228h (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (24.000-83.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (15.6 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "720x576".
(WW) NVIDIA(0): The EDID for HP w2228h (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (24.000-83.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (15.6 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "720x576".
(II) NVIDIA(0): Assigned Display Device: DFP-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1680x1050_60+0+0"
(II) NVIDIA(0):     "1680x1050+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (88, 88); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   

• -1   0   0xffffffff - 0xffffffff (0x1) MX
[1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1680x1050_60+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.6.0, module version = 2.1.1
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "it"
(**) AT Translated Set 2 keyboard: xkb_layout: "it"
(II) NVIDIA(0): Setting mode "1280x1024"
luisa@luisa-desktop:~$

P.S.
Scusa per il "grassetto" ma non l'ho messo io e non riesco a toglierlo.

[Jack_ut]

Prova a modificare lo xorg così (si basa sul mio, ho una 8800)

Codice:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@crested)  Sun Feb  1 20:25:37 UTC 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "HP w2228h"
    HorizSync       24.0 - 82.0
    VertRefresh     48.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400 GS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Ho notato che le frequenze orizzontali, indicate nel tuo xorg.conf, variano un poco da quelle indicate qui e le ho modificate.

Prova e fammi sapere

[frank2]

Fatto il copia e incolla del tuo xorg, salvato, invocato da terminale

sudo nvidia-settings

fatto il salvataggio di routine, riavviata la sessione risoluzione 1280x1024 

[frank2]

Su un backup vecchio di xorg ricordo che in questa sezione:

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
    Load           "v4l"
EndSection

erano presenti soltanto questi moduli

Section "Module"
    Load           "glx"
    Load           "v4l"
EndSection

Credi che possa essere utile?

[Jack_ut]

Il tuo monitor è connesso tramite cavo DVI?

[frank2]

UDMI o qualcosa del genere. Il connettore nuovo, ad alta definizione per intenderci.

P.S. questa: http://it.wikipedia.org/wiki/High-Definition_Multimedia_Interface