[Desktop] Xubuntu - autologout

[kessellparsec]

Buongiorno a tutti, premetto che sono nuovo nel forum e nuovo anche nell'ambiente linux.
Dopo varie ricerce ho installato su un vecchio sony vaio xubuntu e sono rimasto molto contento perche gira molto bene, anzi direi che e' rinato   . Ma sono vittima per la terza volta di uno strano problema , da un certo momento in poi non riesco piu ad entrare negli account che ho creato.Mi spiego meglio avvio xubuntu arrivo alla maschera di login seleziono il mio utente, metto la password , a quel punto accetta la password solo che poi invece di comparire il desktop esce e torna alla maschera di login !!! Come se qualche processo "killasse"  l'interfaccia grafica...
Aiuto per favoreee !
grazie a tutti comunque

ps: con l'utente root non lo ha ancora fatto

[steff]

Puoi intanto provare di creare una altro utente per vedere se dipende da qualche impostazione nella home che è probabile.
 
 Loggati con ctrl+alt+f2 (nome, enter, passw che non vedi ma viene scritto), poi

Codice:

sudo adduser NOME
 sudo adduser NOME admin

ctrl+alt+f7 per il login grafico e prova l'utente nuovo.

[kessellparsec]

Sono d'accordo con te che che sara qualche impostazione della home...ma non riesco a capire quale.
Avevo gia fatto 3 volte la prova di ricreare l'utente (da root e sempre utenti diversi) e dopo qualche giorno ha rifatto lo stesso scherzo , cioè fa il login e poi mi butta fuori.L'unica differenza e' che non l'ho fatto da terminale  ma dall'utente root abilitando il desktop di tale utente. Ovviamente piu tardi faro anche questa prova da te suggeritami...ma intanto non so se si puo pensare a qualche altra soluzione perche temo che il risultato sia lo stesso...!

[steff]

loggati in tty1, cambia con ctrl+alt+f7, fai il login che fallisce e torni in tty1:

Codice:

cat .xsession-errors > errori.txt

e posta errori.txt qui poi, con un altro utente.

[kessellparsec]

ciao, ecco qui i messaggi di errore , forse dipende da un aggiornamento??? Non so...aiuto per favore ! Grazie mille

[steff]

Non è che ho cavato qualcosa di utile... lo spazio su disco c'è?

Codice:

[code]df -h

[/code]

[kessellparsec]

ecco qui ma il mistero e' sempre piu oscuro...!

root@giulio-laptop:~# df -h
File system            Dim. Usati Disp. Uso% Montato su
/dev/sda1              27G  9,9G   16G  40% /
udev                  375M  236K  375M   1% /dev
none                  375M     0  375M   0% /dev/shm
none                  375M  304K  375M   1% /var/run
none                  375M     0  375M   0% /var/lock
none                  375M     0  375M   0% /lib/init/rw
root@giulio-laptop:~#

[kessellparsec]

ti incollo anche il contenuto del mio syslog nella speranza si di aiuto per capire qualcosa.
Grazie kessell

Jan 21 21:45:02 giulio-laptop rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="697" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'.
Jan 21 21:45:51 giulio-laptop anacron[989]: Job `cron.daily' terminated
Jan 21 21:45:51 giulio-laptop anacron[989]: Job `cron.monthly' started
Jan 21 21:45:51 giulio-laptop anacron[4297]: Updated timestamp for job `cron.monthly' to 2010-01-21
Jan 21 21:45:51 giulio-laptop anacron[989]: Job `cron.monthly' terminated
Jan 21 21:45:51 giulio-laptop anacron[989]: Normal exit (2 jobs run)
Jan 21 21:45:54 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 21:47:52 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 21:49:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 21:51:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 21:53:52 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 21:55:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 21:57:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 21:59:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:01:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:03:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:05:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:07:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:09:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:11:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:13:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:15:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:17:01 giulio-laptop CRON[4477]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jan 21 22:17:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:19:55 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:21:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:23:52 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:25:55 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:27:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:29:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:31:55 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:33:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:35:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:37:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:39:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:41:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:43:52 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:45:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:47:45 giulio-laptop kernel: [ 5607.108320] mtrr: no MTRR for d8000000,1000000 found
Jan 21 22:47:45 giulio-laptop acpid: client 1415[0:0] has disconnected
Jan 21 22:47:45 giulio-laptop acpid: client connected from 4650[0:0]
Jan 21 22:47:48 giulio-laptop gnome-session[4686]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:47:49 giulio-laptop gnome-session[4686]: WARNING: Could not launch application 'metacity.desktop': Unable to start application: Esecuzione del processo figlio "metacity" non riuscita (Nessun file o directory)
Jan 21 22:47:49 giulio-laptop gnome-session[4686]: WARNING: Could not launch application 'gnome-power-manager.desktop': Unable to start application: Esecuzione del processo figlio "gnome-power-manager" non riuscita (Nessun file o directory)
Jan 21 22:47:50 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:47:50 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:47:50 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:47:52 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:47:52 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:47:52 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:47:52 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:47:52 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:48:11 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:11 giulio-laptop gdm-simple-greeter[4698]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:26 giulio-laptop console-kit-daemon[767]: GLib-GObject-WARNING: instance of invalid non-instantiatable type `(null)'
Jan 21 22:48:26 giulio-laptop console-kit-daemon[767]: GLib-GObject-CRITICAL: g_signal_emit_valist: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
Jan 21 22:48:26 giulio-laptop console-kit-daemon[767]: GLib-GObject-CRITICAL: g_object_unref: assertion `G_IS_OBJECT (object)' failed
Jan 21 22:48:26 giulio-laptop acpid: client 4650[0:0] has disconnected
Jan 21 22:48:26 giulio-laptop acpid: client connected from 4836[0:0]
Jan 21 22:48:30 giulio-laptop gnome-session[4872]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:30 giulio-laptop gnome-session[4872]: WARNING: Could not launch application 'metacity.desktop': Unable to start application: Esecuzione del processo figlio "metacity" non riuscita (Nessun file o directory)
Jan 21 22:48:30 giulio-laptop gnome-session[4872]: WARNING: Could not launch application 'gnome-power-manager.desktop': Unable to start application: Esecuzione del processo figlio "gnome-power-manager" non riuscita (Nessun file o directory)
Jan 21 22:48:31 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:31 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:31 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:33 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:33 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:33 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:33 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:52 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Couldn't enumerate devices: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:48:52 giulio-laptop gdm-simple-greeter[4884]: devkit-power-gobject-WARNING: Error invoking GetAll() to get properties: The name org.freedesktop.DeviceKit.Power was not provided by any .service files
Jan 21 22:49:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:51:37 giulio-laptop init: tty2 main process ended, respawning
Jan 21 22:51:43 giulio-laptop acpid: client 4836[0:0] has disconnected
Jan 21 22:51:43 giulio-laptop acpid: client connected from 4836[0:0]
Jan 21 22:51:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:53:54 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:55:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:57:21 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Jan 21 22:57:21 giulio-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  completed -> disconnected
Jan 21 22:57:21 giulio-laptop kernel: [ 6183.208100] wlan0: no probe response from AP 00:18:6e:13:d3:5d - disassociating
Jan 21 22:57:21 giulio-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Jan 21 22:57:23 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:57:23 giulio-laptop wpa_supplicant[991]: Trying to associate with 00:18:6e:13:d3:5d (SSID='3Com' freq=2462 MHz)
Jan 21 22:57:23 giulio-laptop wpa_supplicant[991]: Association request to the driver failed
Jan 21 22:57:23 giulio-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Jan 21 22:57:23 giulio-laptop kernel: [ 6185.186316] wlan0: authenticate with AP 00:18:6e:13:d3:5d
Jan 21 22:57:23 giulio-laptop kernel: [ 6185.188655] wlan0: authenticated
Jan 21 22:57:23 giulio-laptop kernel: [ 6185.188664] wlan0: associate with AP 00:18:6e:13:d3:5d
Jan 21 22:57:23 giulio-laptop kernel: [ 6185.192555] wlan0: RX ReassocResp from 00:18:6e:13:d3:5d (capab=0x471 status=0 aid=1)
Jan 21 22:57:23 giulio-laptop kernel: [ 6185.192567] wlan0: associated
Jan 21 22:57:23 giulio-laptop wpa_supplicant[991]: Associated with 00:18:6e:13:d3:5d
Jan 21 22:57:23 giulio-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
Jan 21 22:57:28 giulio-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
Jan 21 22:57:28 giulio-laptop wpa_supplicant[991]: WPA: Key negotiation completed with 00:18:6e:13:d3:5d [PTK=CCMP GTK=TKIP]
Jan 21 22:57:28 giulio-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
Jan 21 22:57:28 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-CONNECTED - Connection to 00:18:6e:13:d3:5d completed (reauth) [id=0 id_str=]
Jan 21 22:57:28 giulio-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Jan 21 22:57:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 22:59:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 23:01:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 23:03:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 23:05:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 23:07:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS
Jan 21 23:09:51 giulio-laptop wpa_supplicant[991]: CTRL-EVENT-SCAN-RESULTS

[kessellparsec]

Nessuna speranza per questo problemino ?
Grazie

[desperados]

ciao a tutti
ho riscontrato lo stesso problema anch'io, ho aperto anche un'altra discussione per errore, non avevo letto bene prima questa, scusate.

sono un utente debian, col nuovo pc ho deciso di provare xubuntu 9.10
tutto bene per un paio di giorni, poi all'improvviso mi chiede la password per avviare il DE
la password avevo impostato che fosse inserita in automatico, e fino a ieri non me l'aveva mai chiesta
vabbè, provo a inserirla, sembra che parta tutto invece torna alla schermata di login e mi richiede di nuovo la password!

se faccio un ctrl+alt+1 e provo ad entrare da riga di comando nessun problema
se faccio

Codice:

$ su -
password:
# /etc/init.d/gdm stop
# exit
$ startx

mi parte correttamente ma non carica il pannello, se faccio:

Codice:

nohup xfce4-panel

mi carica un pannello standard, non quello che avevo personalizzato

ho provato con:

Codice:

apt-get install --reinstall gdm

e stavolta il login automatico ho funzionato, ma mancava ancora il pannello
caricandolo con nohup mi è apparso il mio, quello personale

spento tutto e riavviato, stesso errore di partenza: mi chiede la password e non accedo.
idee?
grazie mille

[desperados]

nei log ho trovato questo di interessante, file /var/log/gdm/:0.log

versione "non mi accetta il login", con un bel "Server aborting":

Codice:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux mauro-desktop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=d684884f-fd6e-4d8f-8982-975ebff0b8b0 ro quiet splash
Build Date: 14 November 2009  05:48:57PM
xorg-server 2:1.6.4-2ubuntu4.1 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb  1 20:02:46 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) |   |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0615:1043:82fb nVidia Corporation G92 [GeForce GTS 250] rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 18:27:24 PDT 2009
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:51:02 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 1048576 kBytes
(--) NVIDIA(0): VideoBIOS: 62.92.7d.00.11
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce GTS 250 at PCI:1:0:0:
(--) NVIDIA(0):     Samsung SyncMaster (DFP-0)
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(==) RandR enabled
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event4"
(II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts.
(II) NVIDIA(0): Setting mode "1680x1050_60_0"

Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4f00c6]
1: /usr/bin/X(xf86SigHandler+0x41) [0x4852c1]
2: /lib/libc.so.6 [0x7f9dbe3c7530]
3: /usr/bin/X [0x4b674a]
4: /usr/bin/X [0x4b6b37]
5: /usr/bin/X [0x49f17f]
6: /usr/bin/X [0x49f355]
7: /usr/bin/X(RRCrtcSet+0x162) [0x51d092]
8: /usr/bin/X(ProcRRSetScreenConfig+0x508) [0x522a88]
9: /usr/bin/X(Dispatch+0x394) [0x44e174]
10: /usr/bin/X(main+0x3b5) [0x434085]
11: /lib/libc.so.6(__libc_start_main+0xfd) [0x7f9dbe3b2abd]
12: /usr/bin/X [0x433509]
Saw signal 11.  Server aborting.
(II) AT Translated Set 2 keyboard: Close
(II) Power Button: Close
(II) Power Button: Close
(II) Macintosh mouse button emulation: Close
(II) Logitech USB-PS/2 Optical Mouse: Close
 ddxSigGiveUp: Closing log
 ddxSigGiveUp: re-raising 11

[desperados]

questo invece è il log dopo il riavvio di gdm e il corretto login (automatico):

Codice:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux mauro-desktop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=d684884f-fd6e-4d8f-8982-975ebff0b8b0 ro quiet splash
Build Date: 14 November 2009  05:48:57PM
xorg-server 2:1.6.4-2ubuntu4.1 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb  1 20:04:19 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) |   |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0615:1043:82fb nVidia Corporation G92 [GeForce GTS 250] rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 18:27:24 PDT 2009
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:51:02 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 1048576 kBytes
(--) NVIDIA(0): VideoBIOS: 62.92.7d.00.11
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce GTS 250 at PCI:1:0:0:
(--) NVIDIA(0):     Samsung SyncMaster (DFP-0)
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(==) RandR enabled
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event4"
(II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) Macintosh mouse button emulation: Close
(II) Power Button: Close
(II) Power Button: Close
(II) AT Translated Set 2 keyboard: Close
 ddxSigGiveUp: Closing log

[desperados]

credo di aver risolto
cerco di ricostruire cosa ho fatto (non ne sono sicurissimo)

sono andato Sistema > Driver hardware e ho disattivato i driver nvidia 185
poi ho scaricato dal sito il .run per la versione 190.53, riavviato e il problema era rimasto
sono tornato in Sistema > Driver hardware e c'erano ancora i driver proprietari nvidia nella versione 18 (anche se disattivati)
quindi ho fatto apt-get autoremove e riavviato, funziona! ma adesso in Sistema > Driver hardware non c'è nulla, precisamente dice che non ci sono driver proprietari
se vado in Impostazioni > Nvidia X Server Settings mi dice che ci sono i driver nvidia 190.53

bho? non ho capito benissimo
adesso provo a spegnere / riavviare un po' di volte e poi comunque vediamo che succede nei prossimi giorni

[desperados]

niente, è durata un paio di riavvi, adesso sono daccapo...

[desperados]

roba da matti, sto' uscendo pazzo....

ho resintallato gdm e ubuntu-desktop, è andata per 2 riavvi e stamattina sono al punto di partenza

[durzino]

Io per ora accedo con xterm e faccio tutto da riga di comando..

[kessellparsec]

Io pero ora sopravvivo con l'utente root !
che sembra non dare il problema e a voi ?
Anche root non funziona ?

[durzino]

l'utente Root mi funziona ,andando in modalità ricovery aprendo una shell e digitando startx,però non riesco ad andare su internet così.
Di conseguenza accedo normalmente e al login metto "Modalità Sessione Xterm",così facendo dal terminale faccio partire xfwm4 per le finestre in modo da gestire un pò meglio la cosa,
nohup xfce4-panel per un pannello standard , e poco di più, con il comando "Opcode&" con Opcode comando qualsiasi ,libero anche il terminale appena lanciato il comando .
A questo punto userei la cosa per imparare un pò di bash.. 
A voi come va?

[desperados]

ieri sera ho installato xdm e finora tutto ok

[durzino]

xdm?Come ?

[desperados]

?
apt-get install xdm

[ninuntu]

Salve


l'ultima risposta inserita risale al 07 febbraio 2010.

essendo passato un bel pò di tempo chiedevo....come funziona il sistema a seguito dell'istallazione di XDM?

si è risolto il problema della continua richiesta ripetuta di  login?

grazie 

[kessellparsec]

Scusate il ritardo.
Allora ho installato xdm su un pc  ma non mi e' piaciuta la grafica e sopratutto non e' il portatile incriminato.
PROMETTO  che stasera lo installo sul portatile vaio e poi vi dico come e andata.
Intanto sto sopravvivendo con l'utente root che smbra non dare problemi.
Grazie a tutti.

[poly2794]

Allora io ho lo stesso problema, ho installato xdm, e sono riuscito ad accedere...anche se la grafica del login non è delle migliori posso anche stare, ma posso stare tranquillo che con xdm non succederà questa cosa? E vorrei capire da cosa è causato questo problema del login...a quanto ho capito è causato dall'installazione dei driver nvidia presi col programma "Driver Hardware". Ho capito giusto?

[kessellparsec]

Codice:

00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 02)
00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 41)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller (PHY/Link Integrated) (rev 02)
02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41)

dalla schermata del codice puoi vedere che io ho una scheda ATI quindi non dipende daramnte ub oeccato avella scheda grafica.
Ho installato anche io ora XDM e sembra funzionare ma la grafica e' veramente brutta.
Credo che disistallero xdm e sopravvivero con l'utente root, anche se e' veramente un peccato che ci sia questo bug in un SO cosi bello e funzionale. Alternative ?
Grazie a tutti.

[desperados]

ieri sera ho aggiornato il kernel e adesso non accedo più nè con xdm nè con gdm, nè col nuovo kernel nè col vecchio

[steff]

Puoi intanto provare di creare una altro utente per vedere se dipende da qualche impostazione nella home.
 Loggati con ctrl+alt+f2 (nome, enter, passw che non vedi ma viene scritto), poi

Codice:

sudo adduser NOME
 sudo adduser NOME admin

ctrl+alt+f7 per il login e prova l'utente nuovo.

[desperados]

già fatto, non si risolve
ho provato ad installarci sopra ubuntu, in GNOME entro ed in Xfce no

[SergenteBasettoni]

stesso problema io...stavo aggiornando ed puf...partito tutto...ora ho provato a reinstallare il desktop...
e nella mia selezione hardware di terze parti non mi segna nulla

[desperados]

alla fine ho installato ubuntu e tolto xubuntu
adesso tutto funziona magnificamente
devo dire che la qualità di Ubuntu (e quindi GNOME) mi ha sorpreso positivamente

[SergenteBasettoni]

eh..mi sa che dovro' fare così pure io
io non ho voglia di reinstallare tuttoooo