TERRATEC CINERGY HTC USB XS COME INSTALLARLA?

[ricciabo77]

Su Ubuntu 9.1 ho una scheda tuner TV Terratec Cinergy HTC USB XS, ID 0ccd:008e TerraTec Electronic GmbH
di cui non riesco a trovare i drive e non riesco a farla rilevare a Kaffeine.
Qualcuno sa se e' possibile in qualche modo farla rilevare?
Ho cercato, ma non sono riuscito a trovare nulla

[superlex]

Su Ubuntu 9.1 ho una scheda tuner TV Terratec Cinergy HTC USB XS, ID 0ccd:008e TerraTec Electronic GmbH
di cui non riesco a trovare i drive e non riesco a farla rilevare a Kaffeine.
Qualcuno sa se e' possibile in qualche modo farla rilevare?
Ho cercato, ma non sono riuscito a trovare nulla

Ciao.
Inseriscila e posta il risultato di

Codice:

dmesg | grep em28xx

[ricciabo77]

Ciao.
Inseriscila e posta il risultato di

Codice:

dmesg | grep em28xx

Non mi da nessun risultato, non viene niente.
Ho provato anche con sudo davanti

[valeriodean]

a me da questo:

Codice:

valerio@valerio-laptop:~$ dmesg | grep em28xx
[14991.760603] em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0)                                                         
[14991.760780] em28xx #0: chip ID is em2882/em2883
[14991.971893] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c                                       
[14991.971919] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00                                       
[14991.971941] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00                                       
[14991.971963] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00                                       
[14991.971985] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                                       
[14991.972007] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                                       
[14991.972029] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00                                       
[14991.972050] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00                                       
[14991.972072] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00                                       
[14991.972093] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03                                       
[14991.972115] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00                                       
[14991.972137] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00                                       
[14991.972159] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00                                       
[14991.972181] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03                                       
[14991.972203] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 00                                       
[14991.972224] em28xx #0: i2c eeprom f0: 35 00 36 00 35 00 38 00 00 00 00 00 00 00 00 00                                       
[14991.972249] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x9813b2be                                                       
[14991.972253] em28xx #0: EEPROM info:
[14991.972257] em28xx #0:       AC97 audio (5 sample rates)
[14991.972261] em28xx #0:       500mA max power
[14991.972266] em28xx #0:       Table at 0x27, strings=0x409e, 0x1cde, 0x346a                                                   
[14991.973014] em28xx #0: Identified as Terratec Hybrid XS (em2882) (card=55)                                                   
[14991.973023] em28xx #0:
[14991.973031] em28xx #0: The support for this board weren't valid yet.                                                         
[14991.973038] em28xx #0: Please send a report of having this working                                                           
[14991.973044] em28xx #0: not to V4L mailing list (and/or to other addresses)                                                   
[14991.993889] tvp5150 6-005c: chip found @ 0xb8 (em28xx #0)
[14992.002085] tuner 6-0061: chip found @ 0xc2 (em28xx #0)
[14992.066155] em28xx #0: Config register raw data: 0xd0
[14992.067516] em28xx #0: AC97 vendor ID = 0xffffffff
[14992.067886] em28xx #0: AC97 features = 0x6a90
[14992.067890] em28xx #0: Empia 202 AC97 audio processor detected                                                               
[14992.341040] em28xx #0: v4l2 driver version 0.1.2
[14992.447179] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0                                                   
[14992.460161] usbcore: registered new interface driver em28xx
[14992.460168] em28xx driver loaded
[14992.482283] em28xx-audio.c: probing for em28x1 non standard usbaudio
[14992.482286] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger

Da quello che vedo dovrebbe essere montata in /dev/video1 e /dev/vbi0... e adesso in kaffeine vediamo che mi invento. 

[superlex]

The support for this board weren't valid yet

Dubito che kaffeine ti veda qualcosa. Inoltre, non te lo riconosce come adapter..

[superlex]

Ciao.
Inseriscila e posta il risultato di

Codice:

dmesg | grep em28xx

Non mi da nessun risultato, non viene niente.
Ho provato anche con sudo davanti

no, il sudo non serve.
Prova a dare semplicemente

Codice:

dmesg

, ripeto, con il tuner inserito.

[ricciabo77]

si, si, avevo il tuner inserito, naturalmente. L'ho sempre inserito.
Ma non mi da risultati.
Avevo provato anche la guida nel post http://forum.ubuntu-it.org/index.php/topic,310711.msg2331941.html#msg2331941 anche se per un'altra scheda terratec. Ed anche seguendo quella guida non mi dava risultati eseguendo

Codice:

dmesg | grep em28xx

Quando torno a casa provo a dare solo

Codice:

dmesg

[superlex]

È molto strano, le terratec si basano al 99% sul modulo di em28xx. Ma tu che versione di ubuntu stai usando?

dai anche

Codice:

uname -a

nel terminale ..

[ricciabo77]

Io ho la 9.1, direi che è l'ultima.
Su internet ho trovato questo http://linux.terratec.de/tv_en.html della terratec, dove per la mia Cinergy HTC USB XS dice: "The chipset maker has not approved to publish the source code under the GPL license. Thus, support is not possible."  Devo scoraggiarmi??

[superlex]

Io ho la 9.1, direi che è l'ultima.
Su internet ho trovato questo http://linux.terratec.de/tv_en.html della terratec, dove per la mia Cinergy HTC USB XS dice: "The chipset maker has not approved to publish the source code under the GPL license. Thus, support is not possible."  Devo scoraggiarmi??

Può darsi..
Però prima postami l'output di

Codice:

uname -a

e di

Codice:

lsusb

con il tuner inserito ..

[valeriodean]

The support for this board weren't valid yet

Dubito che kaffeine ti veda qualcosa. Inoltre, non te lo riconosce come adapter..

Quindi nisba?
Ma che serve dirmi che cos'è e cosa non è, con tremila righe se poi non la riconosce? 

[superlex]

The support for this board weren't valid yet

Dubito che kaffeine ti veda qualcosa. Inoltre, non te lo riconosce come adapter..

Quindi nisba?
Ma che serve dirmi che cos'è e cosa non è, con tremila righe se poi non la riconosce? 

Prova a scaricare questo http://konstantin.filtschew.de/v4l-firmware/firmware_v3.tgz (da estarre) e questo http://www.steventoth.net/linux/hvr1500/, e copia i file che terminano con .fw nella directory /lib/firmware

Poi inserisci il tuner e dai

Codice:

sudo rmmod em28xx_dvb
sudo rmmod em28xx
sudo modprobe em28xx card=11 i2c_scan=1

[ricciabo77]

Allora... lsusb:

Codice:

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 05a4:1000 Ortek Technology, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 067b:2507 Prolific Technology, Inc. PL2507 Hi-speed USB to IDE bridge controller
Bus 001 Device 002: ID 0ccd:008e TerraTec Electronic GmbH
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

uname -a:

Codice:

Linux riccia-casa 2.6.31-14-generic #48lp451337apw1 SMP Wed Oct 28 13:48:18 UTC 2009 i686 GNU/Linux

dmesg:

Codice:

[    0.181053] pci 0000:01:00.1: supports D1 D2
[    0.181095] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.181098] pci 0000:00:01.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.181102] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.181195] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff]
[    0.181216] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[    0.181237] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[    0.181282] pci 0000:03:00.0: supports D1 D2
[    0.181283] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.181288] pci 0000:03:00.0: PME# disabled
[    0.181337] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[    0.181341] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.181389] pci 0000:00:1e.0: transparent bridge
[    0.181411] pci_bus 0000:00: on NUMA node 0
[    0.181415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.181513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.181597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.181641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.188237] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.188328] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.188416] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.188505] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.188593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.188682] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.188771] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.188860] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.189002] SCSI subsystem initialized
[    0.189018] libata version 3.00 loaded.
[    0.189018] usbcore: registered new interface driver usbfs
[    0.189018] usbcore: registered new interface driver hub
[    0.189018] usbcore: registered new device driver usb
[    0.189018] ACPI: WMI: Mapper loaded
[    0.189018] PCI: Using ACPI for IRQ routing
[    0.200006] Bluetooth: Core ver 2.15
[    0.200017] NET: Registered protocol family 31
[    0.200017] Bluetooth: HCI device and connection manager initialized
[    0.200017] Bluetooth: HCI socket layer initialized
[    0.200017] NetLabel: Initializing
[    0.200017] NetLabel:  domain hash size = 128
[    0.200017] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.200027] NetLabel:  unlabeled traffic allowed by default
[    0.200136] hpet clockevent registered
[    0.200139] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.200143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.200147] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.216007] pnp: PnP ACPI init
[    0.216015] ACPI: bus type pnp registered
[    0.219813] pnp: PnP ACPI: found 17 devices
[    0.219815] ACPI: ACPI bus type pnp unregistered
[    0.219819] PnPBIOS: Disabled by ACPI PNP
[    0.219827] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.219835] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.219837] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.219839] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.219842] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.219844] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.219847] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[    0.219852] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.219856] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.219858] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.219863] system 00:0c: ioport range 0xa00-0xadf has been reserved
[    0.219865] system 00:0c: ioport range 0xae0-0xaef has been reserved
[    0.219870] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[    0.219875] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[    0.219877] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[    0.219879] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[    0.219882] system 00:10: iomem range 0x100000-0x7fffffff could not be reserved
[    0.254497] AppArmor: AppArmor Filesystem Enabled
[    0.254532] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.254535] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.254538] pci 0000:00:01.0:   MEM window: 0xfea00000-0xfeafffff
[    0.254541] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.254545] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.254547] pci 0000:00:1c.0:   IO window: disabled
[    0.254551] pci 0000:00:1c.0:   MEM window: disabled
[    0.254554] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.254558] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.254561] pci 0000:00:1c.1:   IO window: 0xe000-0xefff
[    0.254565] pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff
[    0.254568] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.254572] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.254573] pci 0000:00:1e.0:   IO window: disabled
[    0.254578] pci 0000:00:1e.0:   MEM window: disabled
[    0.254581] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.254590]   alloc irq_desc for 16 on node -1
[    0.254592]   alloc kstat_irqs on node -1
[    0.254596] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.254599] pci 0000:00:01.0: setting latency timer to 64
[    0.254605] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.254609] pci 0000:00:1c.0: setting latency timer to 64
[    0.254615]   alloc irq_desc for 17 on node -1
[    0.254616]   alloc kstat_irqs on node -1
[    0.254619] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.254622] pci 0000:00:1c.1: setting latency timer to 64
[    0.254628] pci 0000:00:1e.0: setting latency timer to 64
[    0.254632] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.254634] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.254636] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.254638] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.254640] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.254643] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.254645] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.254647] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.254649] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.254675] NET: Registered protocol family 2
[    0.254750] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.254996] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.255450] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.255650] TCP: Hash tables configured (established 131072 bind 65536)
[    0.255652] TCP reno registered
[    0.255713] NET: Registered protocol family 1
[    0.255769] Trying to unpack rootfs image as initramfs...
[    0.407709] Freeing initrd memory: 7502k freed
[    0.411354] cpufreq-nforce2: No nForce2 chipset.
[    0.411388] Scanning for low memory corruption every 60 seconds
[    0.411483] audit: initializing netlink socket (disabled)
[    0.411498] type=2000 audit(1265741532.407:1): initialized
[    0.418223] highmem bounce pool size: 64 pages
[    0.418227] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.419386] VFS: Disk quotas dquot_6.5.2
[    0.419432] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.419873] fuse init (API version 7.12)
[    0.419943] msgmni has been set to 1705
[    0.420115] alg: No test for stdrng (krng)
[    0.420126] io scheduler noop registered
[    0.420128] io scheduler anticipatory registered
[    0.420129] io scheduler deadline registered
[    0.420161] io scheduler cfq registered (default)
[    0.420246] pci 0000:01:00.0: Boot video device
[    0.420332]   alloc irq_desc for 24 on node -1
[    0.420334]   alloc kstat_irqs on node -1
[    0.420342] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.420348] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.420429]   alloc irq_desc for 25 on node -1
[    0.420431]   alloc kstat_irqs on node -1
[    0.420437] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.420444] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.420542]   alloc irq_desc for 26 on node -1
[    0.420544]   alloc kstat_irqs on node -1
[    0.420549] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.420556] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.420629] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.420646] Firmware did not grant requested _OSC control
[    0.420660] Firmware did not grant requested _OSC control
[    0.420681] Firmware did not grant requested _OSC control
[    0.420690] Firmware did not grant requested _OSC control
[    0.420701] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.420808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.420811] ACPI: Power Button [PWRF]
[    0.420858] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.420860] ACPI: Power Button [PWRB]
[    0.421089] processor LNXCPU:00: registered as cooling_device0
[    0.421116] processor LNXCPU:01: registered as cooling_device1
[    0.423298] isapnp: Scanning for PnP cards...
[    0.701391] Switched to high resolution mode on CPU 1
[    0.703981] Switched to high resolution mode on CPU 0
[    0.776162] isapnp: No Plug & Play device found
[    0.776962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.777052] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.777134] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.777383] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.777579] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.778376] brd: module loaded
[    0.778723] loop: module loaded
[    0.778774] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.778853] ata_piix 0000:00:1f.1: version 2.13
[    0.778863]   alloc irq_desc for 18 on node -1
[    0.778864]   alloc kstat_irqs on node -1
[    0.778869] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.778896] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.778954] scsi0 : ata_piix
[    0.779011] scsi1 : ata_piix
[    0.780020] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.780022] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.780040]   alloc irq_desc for 19 on node -1
[    0.780041]   alloc kstat_irqs on node -1
[    0.780045] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.780051] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.780084] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.780124] scsi2 : ata_piix
[    0.780168] scsi3 : ata_piix
[    0.781155] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[    0.781158] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[    0.781826] Fixed MDIO Bus: probed
[    0.781853] PPP generic driver version 2.4.2
[    0.781922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.781936]   alloc irq_desc for 23 on node -1
[    0.781938]   alloc kstat_irqs on node -1
[    0.781941] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.781952] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.781955] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.781990] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.785887] ehci_hcd 0000:00:1d.7: debug port 1
[    0.785892] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.785902] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[    0.804012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.804079] usb usb1: configuration #1 chosen from 1 choice
[    0.804103] hub 1-0:1.0: USB hub found
[    0.804110] hub 1-0:1.0: 8 ports detected
[    0.804162] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.804174] uhci_hcd: USB Universal Host Controller Interface driver
[    0.804192] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.804197] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.804199] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.804222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.804241] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[    0.804303] usb usb2: configuration #1 chosen from 1 choice
[    0.804323] hub 2-0:1.0: USB hub found
[    0.804328] hub 2-0:1.0: 2 ports detected
[    0.804363] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.804367] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.804370] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.804392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.804411] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[    0.804467] usb usb3: configuration #1 chosen from 1 choice
[    0.804488] hub 3-0:1.0: USB hub found
[    0.804493] hub 3-0:1.0: 2 ports detected
[    0.804525] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.804530] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.804533] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.804554] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.804579] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    0.804635] usb usb4: configuration #1 chosen from 1 choice
[    0.804656] hub 4-0:1.0: USB hub found
[    0.804661] hub 4-0:1.0: 2 ports detected
[    0.804697] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.804702] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.804705] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.804728] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.804753] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
[    0.804810] usb usb5: configuration #1 chosen from 1 choice
[    0.804830] hub 5-0:1.0: USB hub found
[    0.804835] hub 5-0:1.0: 2 ports detected
[    0.804916] PNP: No PS/2 controller found. Probing ports directly.
[    0.806926] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.806931] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.806975] mice: PS/2 mouse device common for all mice
[    0.807042] rtc_cmos 00:03: RTC can wake from S4
[    0.807067] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.807088] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.807168] device-mapper: uevent: version 1.0.3
[    0.807241] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.807294] device-mapper: multipath: version 1.1.0 loaded
[    0.807296] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.807380] EISA: Probing bus 0 at eisa.0
[    0.807403] EISA: Detected 0 cards.
[    0.807454] cpuidle: using governor ladder
[    0.807456] cpuidle: using governor menu
[    0.807837] TCP cubic registered
[    0.807959] NET: Registered protocol family 10
[    0.808307] lo: Disabled Privacy Extensions
[    0.808571] NET: Registered protocol family 17
[    0.808584] Bluetooth: L2CAP ver 2.13
[    0.808586] Bluetooth: L2CAP socket layer initialized
[    0.808588] Bluetooth: SCO (Voice Link) ver 0.6
[    0.808589] Bluetooth: SCO socket layer initialized
[    0.808608] Bluetooth: RFCOMM TTY layer initialized
[    0.808611] Bluetooth: RFCOMM socket layer initialized
[    0.808612] Bluetooth: RFCOMM ver 1.11
[    0.808630] Using IPI No-Shortcut mode
[    0.808680] PM: Resume from disk failed.
[    0.808690] registered taskstats version 1
[    0.808773]   Magic number: 14:897:897
[    0.808824] rtc_cmos 00:03: setting system clock to 2010-02-09 18:52:13 UTC (1265741533)
[    0.808826] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.808828] EDD information not available.
[    0.943139] ata1.00: ATAPI: PIONEER DVD-RW  DVR-116D, 1.06, max UDMA/66
[    0.955091] ata3.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7
[    0.955093] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.960329] ata1.00: configured for UDMA/66
[    0.968320] ata3.00: configured for UDMA/133
[    1.030809] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-116D 1.06 PQ: 0 ANSI: 5
[    1.112014] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.154194] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.154197] Uniform CD-ROM driver Revision: 3.20
[    1.154270] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.154303] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.154371] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD322HJ  1AC0 PQ: 0 ANSI: 5
[    1.154448] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.154451] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.154486] sd 2:0:0:0: [sda] Write Protect is off
[    1.154488] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.154507] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.154595]  sda: sda1 sda2 < sda5 > sda3
[    1.196048] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.196061] Freeing unused kernel memory: 540k freed
[    1.196318] Write protecting the kernel text: 4640k
[    1.196352] Write protecting the kernel read-only data: 1836k
[    1.246263] usb 1-1: configuration #1 chosen from 1 choice
[    1.291251] Linux agpgart interface v0.103
[    1.309789] Floppy drive(s): fd0 is 1.44M
[    1.314250] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.314268] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.314308] r8169 0000:03:00.0: setting latency timer to 64
[    1.314368]   alloc irq_desc for 27 on node -1
[    1.314369]   alloc kstat_irqs on node -1
[    1.314383] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[    1.314884] eth0: RTL8101e at 0xf80f8000, 00:21:85:9e:90:c5, XID 34200000 IRQ 27
[    1.328752] FDC 0 is a post-1991 82077
[    1.472528] usb 1-3: new high speed USB device using ehci_hcd and address 4
[    1.608994] usb 1-3: configuration #1 chosen from 1 choice
[    1.618064] Initializing USB Mass Storage driver...
[    1.618183] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.618251] usbcore: registered new interface driver usb-storage
[    1.618254] USB Mass Storage support registered.
[    1.618396] usb-storage: device found at 4
[    1.618398] usb-storage: waiting for device to settle before scanning
[    1.964014] usb 2-2: new full speed USB device using uhci_hcd and address 2
[    2.140579] usb 2-2: configuration #1 chosen from 1 choice
[    2.152779] scsi8 : SCSI emulation for USB Mass Storage devices
[    2.152961] usb-storage: device found at 2
[    2.152963] usb-storage: waiting for device to settle before scanning
[    2.286087] PM: Starting manual resume from disk
[    2.286090] PM: Resume from partition 8:5
[    2.286091] PM: Checking hibernation image.
[    2.286226] PM: Resume from disk failed.
[    2.302877] EXT4-fs (sda3): barriers enabled
[    2.311195] kjournald2 starting: pid 388, dev sda3:8, commit interval 5 seconds
[    2.311200] EXT4-fs (sda3): delayed allocation enabled
[    2.311203] EXT4-fs: file extents enabled
[    2.312197] EXT4-fs: mballoc enabled
[    2.312210] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    2.396017] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    2.584491] usb 3-2: configuration #1 chosen from 1 choice
[    2.591655] usbcore: registered new interface driver hiddev
[    2.604607] input: ORtek Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
[    2.604662] generic-usb 0003:05A4:1000.0001: input,hidraw0: USB HID v1.10 Keyboard [ORtek Wireless Touchpad Keyboard] on usb-0000:00:1d.1-2/input0
[    2.637477] input: ORtek Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input4
[    2.637546] generic-usb 0003:05A4:1000.0002: input,hidraw1: USB HID v1.10 Mouse [ORtek Wireless Touchpad Keyboard] on usb-0000:00:1d.1-2/input1
[    2.637561] usbcore: registered new interface driver usbhid
[    2.637564] usbhid: v2.6:USB HID core driver
[    2.754796] type=1505 audit(1265741535.443:2): operation="profile_load" pid=419 name=/usr/share/gdm/guest-session/Xsession
[    2.756759] type=1505 audit(1265741535.447:3): operation="profile_load" pid=420 name=/sbin/dhclient3
[    2.757330] type=1505 audit(1265741535.447:4): operation="profile_load" pid=420 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    2.757639] type=1505 audit(1265741535.447:5): operation="profile_load" pid=420 name=/usr/lib/connman/scripts/dhclient-script
[    2.798635] type=1505 audit(1265741535.487:6): operation="profile_load" pid=421 name=/usr/bin/evince
[    2.807876] type=1505 audit(1265741535.495:7): operation="profile_load" pid=421 name=/usr/bin/evince-previewer
[    2.813308] type=1505 audit(1265741535.503:8): operation="profile_load" pid=421 name=/usr/bin/evince-thumbnailer
[    2.830417] type=1505 audit(1265741535.519:9): operation="profile_load" pid=423 name=/usr/lib/cups/backend/cups-pdf
[    2.831088] type=1505 audit(1265741535.519:10): operation="profile_load" pid=423 name=/usr/sbin/cupsd
[    3.577867] Adding 915664k swap on /dev/sda5.  Priority:-1 extents:1 across:915664k
[    3.788727] EXT4-fs (sda3): internal journal on sda3:8
[    5.732618] r8169: eth0: link down
[    5.732773] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.060856] udev: starting version 147
[    6.616156] usb-storage: device scan complete
[    6.651525] scsi 4:0:0:0: Direct-Access     SAMSUNG  HD501LJ          CR10 PQ: 0 ANSI: 0
[    6.651833] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.654011] sd 4:0:0:0: [sdb] Adjusting the sector count from its reported value: 976773168
[    6.654015] sd 4:0:0:0: [sdb] 976773167 512-byte logical blocks: (500 GB/465 GiB)
[    6.654878] sd 4:0:0:0: [sdb] Write Protect is off
[    6.654880] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    6.654882] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    6.655753] sd 4:0:0:0: [sdb] Adjusting the sector count from its reported value: 976773168
[    6.656632] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    6.656635]  sdb: sdb1
[    6.686754] sd 4:0:0:0: [sdb] Adjusting the sector count from its reported value: 976773168
[    6.687634] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    6.687638] sd 4:0:0:0: [sdb] Attached SCSI disk
[    7.153213] usb-storage: device scan complete
[    7.156211] scsi 8:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    7.159210] scsi 8:0:0:1: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[    7.180195] sr1: scsi-1 drive
[    7.180290] sr 8:0:0:0: Attached scsi CD-ROM sr1
[    7.180346] sr 8:0:0:0: Attached scsi generic sg3 type 5
[    7.180438] sd 8:0:0:1: Attached scsi generic sg4 type 0
[    7.195196] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[    7.310584] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.539937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.539958] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.644697] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS...
[    7.644863] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    7.648150] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.648177] HDA Intel 0000:01:00.1: setting latency timer to 64
[    8.413168] __ratelimit: 3 callbacks suppressed
[    8.413171] type=1505 audit(1265737941.103:12): operation="profile_replace" pid=1032 name=/usr/share/gdm/guest-session/Xsession
[    8.414609] type=1505 audit(1265737941.103:13): operation="profile_replace" pid=1033 name=/sbin/dhclient3
[    8.415183] type=1505 audit(1265737941.103:14): operation="profile_replace" pid=1033 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    8.415496] type=1505 audit(1265737941.103:15): operation="profile_replace" pid=1033 name=/usr/lib/connman/scripts/dhclient-script
[    8.418552] type=1505 audit(1265737941.107:16): operation="profile_replace" pid=1034 name=/usr/bin/evince
[    8.428395] type=1505 audit(1265737941.115:17): operation="profile_replace" pid=1034 name=/usr/bin/evince-previewer
[    8.434016] type=1505 audit(1265737941.123:18): operation="profile_replace" pid=1034 name=/usr/bin/evince-thumbnailer
[    8.441561] type=1505 audit(1265737941.131:19): operation="profile_replace" pid=1036 name=/usr/lib/cups/backend/cups-pdf
[    8.442237] type=1505 audit(1265737941.131:20): operation="profile_replace" pid=1036 name=/usr/sbin/cupsd
[    8.444196] type=1505 audit(1265737941.131:21): operation="profile_replace" pid=1037 name=/usr/sbin/tcpdump
[    8.975745] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    8.975750] Disabling lock debugging due to kernel taint
[    8.993518] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[    8.993595] [fglrx]   vendor: 1002 device: 94c3 count: 1
[    8.993880] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[    8.993894] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.993898] pci 0000:01:00.0: setting latency timer to 64
[    8.994140] [fglrx] Kernel PAT support is enabled
[    8.994161] [fglrx] module loaded - fglrx 8.66.10 [Sep  3 2009] with 1 minors
[    9.066675] usbcore: registered new interface driver usbserial
[    9.066688] USB Serial support registered for generic
[    9.066726] usbcore: registered new interface driver usbserial_generic
[    9.066727] usbserial: USB Serial Driver core
[    9.068680] USB Serial support registered for GSM modem (1-port)
[    9.068709] option 2-2:1.0: GSM modem (1-port) converter detected
[    9.068780] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[    9.068788] option 2-2:1.1: GSM modem (1-port) converter detected
[    9.068828] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[    9.068835] option 2-2:1.2: GSM modem (1-port) converter detected
[    9.068879] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[    9.068898] usbcore: registered new interface driver option
[    9.068899] option: v0.7.2:USB Driver for GSM modems
[    9.073357] intel_rng: FWH not detected
[    9.963572] parport_pc 00:0e: reported by Plug and Play ACPI
[    9.963679] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    9.969360] lp: driver loaded but no devices found
[    9.970409] ppdev: user-space parallel port driver
[   10.060665] lp0: using parport0 (interrupt-driven).
[   12.782965] CPU0 attaching NULL sched-domain.
[   12.782970] CPU1 attaching NULL sched-domain.
[   12.796552] CPU0 attaching sched-domain:
[   12.796555]  domain 0: span 0-1 level MC
[   12.796557]   groups: 0 1
[   12.796560]   domain 1: span 0-1 level CPU
[   12.796562]    groups: 0-1 (__cpu_power = 2048)
[   12.796566] CPU1 attaching sched-domain:
[   12.796568]  domain 0: span 0-1 level MC
[   12.796569]   groups: 1 0
[   12.796572]   domain 1: span 0-1 level CPU
[   12.796574]    groups: 0-1 (__cpu_power = 2048)
[   13.952636]   alloc irq_desc for 28 on node -1
[   13.952639]   alloc kstat_irqs on node -1
[   13.952648] fglrx_pci 0000:01:00.0: irq 28 for MSI/MSI-X
[   13.953123] [fglrx] Firegl kernel thread PID: 1593
[   16.440547] [fglrx] Gart USWC size:627 M.
[   16.440550] [fglrx] Gart cacheable size:247 M.
[   16.440554] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   16.440557] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[   16.440559] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[   17.874352] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   18.944705] CPU0 attaching NULL sched-domain.
[   18.944709] CPU1 attaching NULL sched-domain.
[   18.964549] CPU0 attaching sched-domain:
[   18.964552]  domain 0: span 0-1 level MC
[   18.964554]   groups: 0 1
[   18.964558] CPU1 attaching sched-domain:
[   18.964560]  domain 0: span 0-1 level MC
[   18.964562]   groups: 1 0
[   26.612939] UDF-fs: No VRS found
[   26.612943] UDF-fs: No partition found (1)
[   26.641936] ISO 9660 Extensions: Microsoft Joliet Level 3
[   26.646936] ISOFS: changing to secondary root
[   68.096657] PPP BSD Compression module registered
[   68.130834] PPP Deflate Compression module registered

dmesg | grep em28xx invece nulla...

[superlex]

Sarò io ma nel dmesg non vedo nulla.. l'hai dato appena hai inserito il tuner?

PS: perché hai ancora il kernel "vecchio"?

[ricciabo77]

Sarò io ma nel dmesg non vedo nulla.. l'hai dato appena hai inserito il tuner?

PS: perché hai ancora il kernel "vecchio"?

Io il tuner l'ho sempre collegato al computer, ma ho guardato e nemmeno io ho visto nulla con scritto terratec, comunque ho l'impressione che le prime righe del risultato di desmg non me le faccia vedere, come se fossero troppe e non mi lasciasse tornare abbastanza su. infatti non arrivo a vedere il comando che avevo digitato. (non so se sono riuscito a spiegarmi...) il Kernel non saprei. Io ho installato Ubunto facendo una partizione accanto a windows xp, ho avuto dei problemi con il grub2, risolti escludendo le UUID, dopodiche ho installato gli aggiornamenti del kernel come mi proponeva, ma al 213 di 218 si bloccava e non andava piu' avanti. Leggendo dai post ho risolto facendo l'aggiornamento manuale da terminale, che e' filato tutto liscio. Quando mi ha chiesto se sostituire il file grub che avevo modificato io ho rifiutato, per non ritrovarmi con il problama di avvio. le modifiche comunque riguardavano solo le righe che avevo modificato. Questo e' quel che riesco a dirti. Considera che sono solo 3 settimane che la sera uso Ubuntu... sono molto acerbo...

[ricciabo77]

adesso ho provato e mi sta facendo un aggiornamento parziale, con avanzamento di versione...

[superlex]

Sarò io ma nel dmesg non vedo nulla.. l'hai dato appena hai inserito il tuner?

PS: perché hai ancora il kernel "vecchio"?

Io il tuner l'ho sempre collegato al computer, ma ho guardato e nemmeno io ho visto nulla con scritto terratec, comunque ho l'impressione che le prime righe del risultato di desmg non me le faccia vedere, come se fossero troppe e non mi lasciasse tornare abbastanza su. infatti non arrivo a vedere il comando che avevo digitato. (non so se sono riuscito a spiegarmi...) il Kernel non saprei. Io ho installato Ubunto facendo una partizione accanto a windows xp, ho avuto dei problemi con il grub2, risolti escludendo le UUID, dopodiche ho installato gli aggiornamenti del kernel come mi proponeva, ma al 213 di 218 si bloccava e non andava piu' avanti. Leggendo dai post ho risolto facendo l'aggiornamento manuale da terminale, che e' filato tutto liscio. Quando mi ha chiesto se sostituire il file grub che avevo modificato io ho rifiutato, per non ritrovarmi con il problama di avvio. le modifiche comunque riguardavano solo le righe che avevo modificato. Questo e' quel che riesco a dirti. Considera che sono solo 3 settimane che la sera uso Ubuntu... sono molto acerbo.

Devi allora togliere il tuner, rimetterlo e dare

Codice:

dmesg

, così che le ultime righe siano relative a esso..

[superlex]

adesso ho provato e mi sta facendo un aggiornamento parziale, con avanzamento di versione...

[ricciabo77]

Scusa... Hai ragione...   Ero convinto fosse aggiornato... Per le righe ho visto e ho aumentato le righe del terminale, ma adesso faccio come hai detto, stacco e riattacco...
La versione ora e':

Codice:

Linux riccia-casa 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 i686 GNU/Linux

comunque

Codice:

dmesg | grep em28xx

non da risultati
dmesg:

Codice:

[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7fffe000 (gap: 7fffe000:7ee02000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c200a000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519983
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=/dev/sda3 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10483520 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007ffa0)
[    0.000000] Memory: 2052400k/2096768k available (4567k kernel code, 43036k reserved, 2141k data, 540k init, 1187464k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575c48 - 0xc078d408   (2141 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575c48   (4567 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2520.657 MHz processor.
[    0.001021] Console: colour VGA+ 80x25
[    0.001023] console [tty0] enabled
[    0.001063] Calibrating delay loop (skipped), value calculated using timer frequency.. 5041.31 BogoMIPS (lpj=10082628)
[    0.001080] Security Framework initialized
[    0.001099] AppArmor: AppArmor initialized
[    0.001105] Mount-cache hash table entries: 512
[    0.001215] Initializing cgroup subsys ns
[    0.001219] Initializing cgroup subsys cpuacct
[    0.001222] Initializing cgroup subsys memory
[    0.001227] Initializing cgroup subsys freezer
[    0.001229] Initializing cgroup subsys net_cls
[    0.001241] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.001243] CPU: L2 cache: 2048K
[    0.001246] CPU: Physical Processor ID: 0
[    0.001247] CPU: Processor Core ID: 0
[    0.001250] mce: CPU supports 6 MCE banks
[    0.001257] CPU0: Thermal monitoring enabled (TM2)
[    0.001260] using mwait in idle threads.
[    0.001265] Performance Counters: Core2 events, Intel PMU driver.
[    0.001272] ... version:                 2
[    0.001274] ... bit width:               40
[    0.001275] ... generic counters:        2
[    0.001276] ... value mask:              000000ffffffffff
[    0.001278] ... max period:              000000007fffffff
[    0.001279] ... fixed-purpose counters:  3
[    0.001280] ... counter mask:            0000000700000003
[    0.001283] Checking 'hlt' instruction... OK.
[    0.018244] ACPI: Core revision 20090521
[    0.028350] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068571] CPU0: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz stepping 06
[    0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 9578.89 BogoMIPS (lpj=19157799)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] mce: CPU supports 6 MCE banks
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.157447] CPU1: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz stepping 06
[    0.157461] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.160020] Brought up 2 CPUs
[    0.160022] Total of 2 processors activated (14620.21 BogoMIPS).
[    0.160065] CPU0 attaching sched-domain:
[    0.160068]  domain 0: span 0-1 level MC
[    0.160070]   groups: 0 1
[    0.160074] CPU1 attaching sched-domain:
[    0.160076]  domain 0: span 0-1 level MC
[    0.160078]   groups: 1 0
[    0.160144] Booting paravirtualized kernel on bare hardware
[    0.160164] regulator: core version 0.5
[    0.160164] Time: 20:24:17  Date: 02/09/10
[    0.160164] NET: Registered protocol family 16
[    0.160170] EISA bus registered
[    0.160178] ACPI: bus type pci registered
[    0.160233] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.160235] PCI: Not using MMCONFIG.
[    0.160378] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.160380] PCI: Using configuration type 1 for base access
[    0.161160] bio: create slab <bio-0> at 0
[    0.161160] ACPI: EC: Look up EC in DSDT
[    0.169929] ACPI: Interpreter enabled
[    0.169936] ACPI: (supports S0 S1 S3 S4 S5)
[    0.169954] ACPI: Using IOAPIC for interrupt routing
[    0.169993] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.173245] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.173247] PCI: Using MMCONFIG for extended config space
[    0.179116] ACPI Warning: Incorrect checksum in table [OEMB] - 49, should be 3A 20090521 tbutils-246
[    0.179870] ACPI: No dock devices found.
[    0.180122] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.180217] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.180220] pci 0000:00:01.0: PME# disabled
[    0.180276] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[    0.180315] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.180318] pci 0000:00:1b.0: PME# disabled
[    0.180373] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.180376] pci 0000:00:1c.0: PME# disabled
[    0.180430] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.180433] pci 0000:00:1c.1: PME# disabled
[    0.180478] pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
[    0.180522] pci 0000:00:1d.1: reg 20 io port: [0xc880-0xc89f]
[    0.180565] pci 0000:00:1d.2: reg 20 io port: [0xc800-0xc81f]
[    0.180609] pci 0000:00:1d.3: reg 20 io port: [0xc480-0xc49f]
[    0.180658] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe9fbc00-0xfe9fbfff]
[    0.180704] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.180708] pci 0000:00:1d.7: PME# disabled
[    0.180819] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.180823] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.180827] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.180830] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.180833] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)
[    0.180836] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
[    0.180873] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.180879] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.180885] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[    0.180890] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[    0.180896] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    0.180934] pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407]
[    0.180939] pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083]
[    0.180944] pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007]
[    0.180949] pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03]
[    0.180955] pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f]
[    0.180976] pci 0000:00:1f.2: PME# supported from D3hot
[    0.180979] pci 0000:00:1f.2: PME# disabled
[    0.181020] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.181069] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[    0.181078] pci 0000:01:00.0: reg 18 64bit mmio: [0xfeaf0000-0xfeafffff]
[    0.181083] pci 0000:01:00.0: reg 20 io port: [0xd000-0xd0ff]
[    0.181092] pci 0000:01:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
[    0.181109] pci 0000:01:00.0: supports D1 D2
[    0.181141] pci 0000:01:00.1: reg 10 64bit mmio: [0xfeaec000-0xfeaeffff]
[    0.181175] pci 0000:01:00.1: supports D1 D2
[    0.181217] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.181219] pci 0000:00:01.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.181223] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.181316] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff]
[    0.181337] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[    0.181357] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[    0.181402] pci 0000:03:00.0: supports D1 D2
[    0.181404] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.181409] pci 0000:03:00.0: PME# disabled
[    0.181457] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[    0.181461] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.181509] pci 0000:00:1e.0: transparent bridge
[    0.181531] pci_bus 0000:00: on NUMA node 0
[    0.181535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.181634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.181719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.181763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.188393] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.188485] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.188574] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.188662] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.188751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.188840] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.188930] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.189019] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.189160] SCSI subsystem initialized
[    0.189176] libata version 3.00 loaded.
[    0.189176] usbcore: registered new interface driver usbfs
[    0.189176] usbcore: registered new interface driver hub
[    0.189176] usbcore: registered new device driver usb
[    0.189176] ACPI: WMI: Mapper loaded
[    0.189176] PCI: Using ACPI for IRQ routing
[    0.200006] Bluetooth: Core ver 2.15
[    0.200017] NET: Registered protocol family 31
[    0.200017] Bluetooth: HCI device and connection manager initialized
[    0.200017] Bluetooth: HCI socket layer initialized
[    0.200017] NetLabel: Initializing
[    0.200017] NetLabel:  domain hash size = 128
[    0.200017] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.200026] NetLabel:  unlabeled traffic allowed by default
[    0.200136] hpet clockevent registered
[    0.200138] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.200142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.200146] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.216009] pnp: PnP ACPI init
[    0.216018] ACPI: bus type pnp registered
[    0.219827] pnp: PnP ACPI: found 17 devices
[    0.219829] ACPI: ACPI bus type pnp unregistered
[    0.219832] PnPBIOS: Disabled by ACPI PNP
[    0.219841] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.219848] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.219850] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.219853] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.219855] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.219858] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.219860] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[    0.219865] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.219869] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.219871] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.219876] system 00:0c: ioport range 0xa00-0xadf has been reserved
[    0.219878] system 00:0c: ioport range 0xae0-0xaef has been reserved
[    0.219883] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[    0.219887] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[    0.219890] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[    0.219892] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[    0.219894] system 00:10: iomem range 0x100000-0x7fffffff could not be reserved
[    0.254511] AppArmor: AppArmor Filesystem Enabled
[    0.254546] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.254548] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.254552] pci 0000:00:01.0:   MEM window: 0xfea00000-0xfeafffff
[    0.254555] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.254559] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.254561] pci 0000:00:1c.0:   IO window: disabled
[    0.254564] pci 0000:00:1c.0:   MEM window: disabled
[    0.254568] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.254571] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.254573] pci 0000:00:1c.1:   IO window: 0xe000-0xefff
[    0.254578] pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff
[    0.254581] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.254585] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.254586] pci 0000:00:1e.0:   IO window: disabled
[    0.254590] pci 0000:00:1e.0:   MEM window: disabled
[    0.254593] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.254601]   alloc irq_desc for 16 on node -1
[    0.254603]   alloc kstat_irqs on node -1
[    0.254608] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.254611] pci 0000:00:01.0: setting latency timer to 64
[    0.254617] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.254621] pci 0000:00:1c.0: setting latency timer to 64
[    0.254626]   alloc irq_desc for 17 on node -1
[    0.254628]   alloc kstat_irqs on node -1
[    0.254630] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.254634] pci 0000:00:1c.1: setting latency timer to 64
[    0.254639] pci 0000:00:1e.0: setting latency timer to 64
[    0.254643] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.254645] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.254647] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.254649] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.254651] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.254653] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.254655] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.254657] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.254659] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.254685] NET: Registered protocol family 2
[    0.254761] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.255010] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.255455] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.255661] TCP: Hash tables configured (established 131072 bind 65536)
[    0.255663] TCP reno registered
[    0.255725] NET: Registered protocol family 1
[    0.255772] Trying to unpack rootfs image as initramfs...
[    0.406556] Freeing initrd memory: 7472k freed
[    0.410266] cpufreq-nforce2: No nForce2 chipset.
[    0.410291] Scanning for low memory corruption every 60 seconds
[    0.410383] audit: initializing netlink socket (disabled)
[    0.410399] type=2000 audit(1265747057.408:1): initialized
[    0.417296] highmem bounce pool size: 64 pages
[    0.417300] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.418438] VFS: Disk quotas dquot_6.5.2
[    0.418486] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.418918] fuse init (API version 7.12)
[    0.418983] msgmni has been set to 1705
[    0.419148] alg: No test for stdrng (krng)
[    0.419160] io scheduler noop registered
[    0.419161] io scheduler anticipatory registered
[    0.419163] io scheduler deadline registered
[    0.419196] io scheduler cfq registered (default)
[    0.419279] pci 0000:01:00.0: Boot video device
[    0.419367]   alloc irq_desc for 24 on node -1
[    0.419369]   alloc kstat_irqs on node -1
[    0.419377] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.419382] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.419463]   alloc irq_desc for 25 on node -1
[    0.419464]   alloc kstat_irqs on node -1
[    0.419470] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.419477] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.419573]   alloc irq_desc for 26 on node -1
[    0.419575]   alloc kstat_irqs on node -1
[    0.419581] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.419587] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.419665] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.419681] Firmware did not grant requested _OSC control
[    0.419694] Firmware did not grant requested _OSC control
[    0.419716] Firmware did not grant requested _OSC control
[    0.419725] Firmware did not grant requested _OSC control
[    0.419736] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.419842] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.419845] ACPI: Power Button [PWRF]
[    0.419891] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.419894] ACPI: Power Button [PWRB]
[    0.420126] processor LNXCPU:00: registered as cooling_device0
[    0.420154] processor LNXCPU:01: registered as cooling_device1
[    0.422343] isapnp: Scanning for PnP cards...
[    0.701496] Switched to high resolution mode on CPU 1
[    0.704017] Switched to high resolution mode on CPU 0
[    0.775187] isapnp: No Plug & Play device found
[    0.775994] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.776088] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.776171] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.776423] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.776619] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.777410] brd: module loaded
[    0.777761] loop: module loaded
[    0.777813] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.777890] ata_piix 0000:00:1f.1: version 2.13
[    0.777900]   alloc irq_desc for 18 on node -1
[    0.777901]   alloc kstat_irqs on node -1
[    0.777906] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.777936] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.777994] scsi0 : ata_piix
[    0.778052] scsi1 : ata_piix
[    0.779074] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.779076] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.779094]   alloc irq_desc for 19 on node -1
[    0.779095]   alloc kstat_irqs on node -1
[    0.779099] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.779104] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.779138] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.779180] scsi2 : ata_piix
[    0.779218] scsi3 : ata_piix
[    0.780225] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[    0.780228] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[    0.780888] Fixed MDIO Bus: probed
[    0.780915] PPP generic driver version 2.4.2
[    0.780978] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.780992]   alloc irq_desc for 23 on node -1
[    0.780994]   alloc kstat_irqs on node -1
[    0.780997] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.781007] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.781010] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.781044] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.784955] ehci_hcd 0000:00:1d.7: debug port 1
[    0.784961] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.784971] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[    0.800013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.800080] usb usb1: configuration #1 chosen from 1 choice
[    0.800104] hub 1-0:1.0: USB hub found
[    0.800110] hub 1-0:1.0: 8 ports detected
[    0.800161] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.800173] uhci_hcd: USB Universal Host Controller Interface driver
[    0.800193] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.800198] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.800200] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.800224] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.800244] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[    0.800304] usb usb2: configuration #1 chosen from 1 choice
[    0.800323] hub 2-0:1.0: USB hub found
[    0.800329] hub 2-0:1.0: 2 ports detected
[    0.800362] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.800367] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.800370] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.800393] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.800412] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[    0.800470] usb usb3: configuration #1 chosen from 1 choice
[    0.800490] hub 3-0:1.0: USB hub found
[    0.800495] hub 3-0:1.0: 2 ports detected
[    0.800531] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.800536] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.800538] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.800560] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.800585] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    0.800643] usb usb4: configuration #1 chosen from 1 choice
[    0.800663] hub 4-0:1.0: USB hub found
[    0.800667] hub 4-0:1.0: 2 ports detected
[    0.800701] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.800706] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.800709] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.800734] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.800759] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
[    0.800815] usb usb5: configuration #1 chosen from 1 choice
[    0.800834] hub 5-0:1.0: USB hub found
[    0.800841] hub 5-0:1.0: 2 ports detected
[    0.800925] PNP: No PS/2 controller found. Probing ports directly.
[    0.803177] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.803181] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.803225] mice: PS/2 mouse device common for all mice
[    0.803293] rtc_cmos 00:03: RTC can wake from S4
[    0.803319] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.803340] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.803418] device-mapper: uevent: version 1.0.3
[    0.803503] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.803551] device-mapper: multipath: version 1.1.0 loaded
[    0.803553] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.803636] EISA: Probing bus 0 at eisa.0
[    0.803660] EISA: Detected 0 cards.
[    0.803716] cpuidle: using governor ladder
[    0.803717] cpuidle: using governor menu
[    0.804098] TCP cubic registered
[    0.804217] NET: Registered protocol family 10
[    0.804574] lo: Disabled Privacy Extensions
[    0.804831] NET: Registered protocol family 17
[    0.804844] Bluetooth: L2CAP ver 2.13
[    0.804846] Bluetooth: L2CAP socket layer initialized
[    0.804848] Bluetooth: SCO (Voice Link) ver 0.6
[    0.804849] Bluetooth: SCO socket layer initialized
[    0.804869] Bluetooth: RFCOMM TTY layer initialized
[    0.804872] Bluetooth: RFCOMM socket layer initialized
[    0.804873] Bluetooth: RFCOMM ver 1.11
[    0.804902] Using IPI No-Shortcut mode
[    0.804944] PM: Resume from disk failed.
[    0.804954] registered taskstats version 1
[    0.805035]   Magic number: 14:147:447
[    0.805085] rtc_cmos 00:03: setting system clock to 2010-02-09 20:24:18 UTC (1265747058)
[    0.805087] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.805089] EDD information not available.
[    0.952186] ata1.00: ATAPI: PIONEER DVD-RW  DVR-116D, 1.06, max UDMA/66
[    0.955047] ata3.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7
[    0.955050] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.964222] ata1.00: configured for UDMA/66
[    0.964338] ata1.00: TEST_UNIT_READY failed (err_mask=0x2)
[    0.976306] ata3.00: configured for UDMA/133
[    1.112013] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.245687] usb 1-1: configuration #1 chosen from 1 choice
[    1.468014] usb 1-3: new high speed USB device using ehci_hcd and address 4
[    1.602055] usb 1-3: configuration #1 chosen from 1 choice
[    1.896012] usb 2-2: new full speed USB device using uhci_hcd and address 2
[    2.060310] usb 2-2: configuration #1 chosen from 1 choice
[    2.308012] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    2.487474] usb 3-2: configuration #1 chosen from 1 choice
[    6.112221] ata1.00: configured for UDMA/66
[    6.112338] ata1.00: TEST_UNIT_READY failed (err_mask=0x2)
[    6.112340] ata1.00: limiting speed to UDMA/66:PIO3
[   11.268228] ata1.00: configured for UDMA/66
[   11.268344] ata1.00: TEST_UNIT_READY failed (err_mask=0x2)
[   11.268346] ata1.00: disabled
[   11.268371] ata1: soft resetting link
[   11.424075] ata1: EH complete
[   11.424174] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD322HJ  1AC0 PQ: 0 ANSI: 5
[   11.424260] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   11.424289] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[   11.424324] sd 2:0:0:0: [sda] Write Protect is off
[   11.424326] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.424345] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.424443]  sda: sda1 sda2 < sda5 > sda3
[   11.465166] sd 2:0:0:0: [sda] Attached SCSI disk
[   11.465181] Freeing unused kernel memory: 540k freed
[   11.465438] Write protecting the kernel text: 4568k
[   11.465471] Write protecting the kernel read-only data: 1836k
[   11.551139] Linux agpgart interface v0.103
[   11.560407] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.560431] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.560474] r8169 0000:03:00.0: setting latency timer to 64
[   11.560568]   alloc irq_desc for 27 on node -1
[   11.560570]   alloc kstat_irqs on node -1
[   11.560586] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[   11.561123] eth0: RTL8101e at 0xf80ce000, 00:21:85:9e:90:c5, XID 34200000 IRQ 27
[   11.612814] Floppy drive(s): fd0 is 1.44M
[   11.626347] usbcore: registered new interface driver hiddev
[   11.630353] Initializing USB Mass Storage driver...
[   11.630488] scsi4 : SCSI emulation for USB Mass Storage devices
[   11.631549] usb-storage: device found at 4
[   11.631551] usb-storage: waiting for device to settle before scanning
[   11.632281] scsi8 : SCSI emulation for USB Mass Storage devices
[   11.632404] usbcore: registered new interface driver usb-storage
[   11.632407] USB Mass Storage support registered.
[   11.632499] usb-storage: device found at 2
[   11.632519] usb-storage: waiting for device to settle before scanning
[   11.634056] FDC 0 is a post-1991 82077
[   11.638623] input: ORtek Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
[   11.638678] generic-usb 0003:05A4:1000.0001: input,hidraw0: USB HID v1.10 Keyboard [ORtek Wireless Touchpad Keyboard] on usb-0000:00:1d.1-2/input0
[   11.670477] input: ORtek Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input4
[   11.670539] generic-usb 0003:05A4:1000.0002: input,hidraw1: USB HID v1.10 Mouse [ORtek Wireless Touchpad Keyboard] on usb-0000:00:1d.1-2/input1
[   11.670553] usbcore: registered new interface driver usbhid
[   11.670555] usbhid: v2.6:USB HID core driver
[   12.457354] PM: Starting manual resume from disk
[   12.457357] PM: Resume from partition 8:5
[   12.457359] PM: Checking hibernation image.
[   12.457526] PM: Resume from disk failed.
[   12.472483] EXT4-fs (sda3): barriers enabled
[   12.480803] kjournald2 starting: pid 418, dev sda3:8, commit interval 5 seconds
[   12.480808] EXT4-fs (sda3): delayed allocation enabled
[   12.480811] EXT4-fs: file extents enabled
[   12.481842] EXT4-fs: mballoc enabled
[   12.481854] EXT4-fs (sda3): mounted filesystem with ordered data mode
[   12.924473] type=1505 audit(1265747070.618:2): operation="profile_load" pid=441 name=/usr/share/gdm/guest-session/Xsession
[   12.926487] type=1505 audit(1265747070.618:3): operation="profile_load" pid=442 name=/sbin/dhclient3
[   12.927059] type=1505 audit(1265747070.618:4): operation="profile_load" pid=442 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   12.927369] type=1505 audit(1265747070.618:5): operation="profile_load" pid=442 name=/usr/lib/connman/scripts/dhclient-script
[   12.976597] type=1505 audit(1265747070.671:6): operation="profile_load" pid=443 name=/usr/bin/evince
[   12.985849] type=1505 audit(1265747070.679:7): operation="profile_load" pid=443 name=/usr/bin/evince-previewer
[   12.991267] type=1505 audit(1265747070.683:8): operation="profile_load" pid=443 name=/usr/bin/evince-thumbnailer
[   13.008323] type=1505 audit(1265747070.699:9): operation="profile_load" pid=445 name=/usr/lib/cups/backend/cups-pdf
[   13.008998] type=1505 audit(1265747070.703:10): operation="profile_load" pid=445 name=/usr/sbin/cupsd
[   13.011077] type=1505 audit(1265747070.703:11): operation="profile_load" pid=446 name=/usr/sbin/tcpdump
[   13.773150] Adding 915664k swap on /dev/sda5.  Priority:-1 extents:1 across:915664k
[   13.943412] EXT4-fs (sda3): internal journal on sda3:8
[   15.302019] udev: starting version 147
[   16.106142] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   16.106147] Disabling lock debugging due to kernel taint
[   16.123849] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[   16.123924] [fglrx]   vendor: 1002 device: 94c3 count: 1
[   16.124209] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[   16.124224] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.124228] pci 0000:01:00.0: setting latency timer to 64
[   16.124464] [fglrx] Kernel PAT support is enabled
[   16.124483] [fglrx] module loaded - fglrx 8.66.10 [Sep  3 2009] with 1 minors
[   16.277976] usbcore: registered new interface driver usbserial
[   16.277990] USB Serial support registered for generic
[   16.278024] usbcore: registered new interface driver usbserial_generic
[   16.278026] usbserial: USB Serial Driver core
[   16.289215] USB Serial support registered for GSM modem (1-port)
[   16.289243] option 2-2:1.0: GSM modem (1-port) converter detected
[   16.289307] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[   16.289315] option 2-2:1.1: GSM modem (1-port) converter detected
[   16.289351] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[   16.289358] option 2-2:1.2: GSM modem (1-port) converter detected
[   16.289393] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[   16.289410] usbcore: registered new interface driver option
[   16.289411] option: v0.7.2:USB Driver for GSM modems
[   16.315612] parport_pc 00:0e: reported by Plug and Play ACPI
[   16.315711] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   16.328819] lp: driver loaded but no devices found
[   16.384987] ppdev: user-space parallel port driver
[   16.412664] lp0: using parport0 (interrupt-driven).
[   16.628780] usb-storage: device scan complete
[   16.634270] usb-storage: device scan complete
[   16.637282] scsi 8:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   16.640276] scsi 8:0:0:1: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   16.664158] scsi 4:0:0:0: Direct-Access     SAMSUNG  HD501LJ          CR10 PQ: 0 ANSI: 0
[   16.664504] sd 4:0:0:0: Attached scsi generic sg1 type 0
[   16.667132] sd 4:0:0:0: [sdb] Adjusting the sector count from its reported value: 976773168
[   16.667137] sd 4:0:0:0: [sdb] 976773167 512-byte logical blocks: (500 GB/465 GiB)
[   16.668005] sd 4:0:0:0: [sdb] Write Protect is off
[   16.668008] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   16.668009] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   16.669756] sd 4:0:0:0: [sdb] Adjusting the sector count from its reported value: 976773168
[   16.670755] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   16.670758]  sdb:sr0: scsi-1 drive
[   16.681265] Uniform CD-ROM driver Revision: 3.20
[   16.681352] sr 8:0:0:0: Attached scsi CD-ROM sr0
[   16.681405] sr 8:0:0:0: Attached scsi generic sg2 type 5
[   16.681493] sd 8:0:0:1: Attached scsi generic sg3 type 0
[   16.697270] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[   16.710393]  sdb1
[   16.712240] sd 4:0:0:0: [sdb] Adjusting the sector count from its reported value: 976773168
[   16.713853] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   16.713858] sd 4:0:0:0: [sdb] Attached SCSI disk
[   16.729685] intel_rng: FWH not detected
[   16.904907] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.127119] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.127139] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.253608] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS...
[   17.253783] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[   17.257022] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   17.257048] HDA Intel 0000:01:00.1: setting latency timer to 64
[   18.568058] r8169: eth0: link down
[   18.568215] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.395866] type=1505 audit(1265743477.086:12): operation="profile_replace" pid=1100 name=/usr/share/gdm/guest-session/Xsession
[   19.397618] type=1505 audit(1265743477.090:13): operation="profile_replace" pid=1101 name=/sbin/dhclient3
[   19.398192] type=1505 audit(1265743477.090:14): operation="profile_replace" pid=1101 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   19.398502] type=1505 audit(1265743477.090:15): operation="profile_replace" pid=1101 name=/usr/lib/connman/scripts/dhclient-script
[   19.401727] type=1505 audit(1265743477.094:16): operation="profile_replace" pid=1102 name=/usr/bin/evince
[   19.411078] type=1505 audit(1265743477.102:17): operation="profile_replace" pid=1102 name=/usr/bin/evince-previewer
[   19.416564] type=1505 audit(1265743477.110:18): operation="profile_replace" pid=1102 name=/usr/bin/evince-thumbnailer
[   19.426590] type=1505 audit(1265743477.118:19): operation="profile_replace" pid=1105 name=/usr/lib/cups/backend/cups-pdf
[   19.427267] type=1505 audit(1265743477.118:20): operation="profile_replace" pid=1105 name=/usr/sbin/cupsd
[   19.429273] type=1505 audit(1265743477.122:21): operation="profile_replace" pid=1106 name=/usr/sbin/tcpdump
[   22.052781]   alloc irq_desc for 28 on node -1
[   22.052784]   alloc kstat_irqs on node -1
[   22.052794] fglrx_pci 0000:01:00.0: irq 28 for MSI/MSI-X
[   22.053348] [fglrx] Firegl kernel thread PID: 1476
[   22.679046] CPU0 attaching NULL sched-domain.
[   22.679050] CPU1 attaching NULL sched-domain.
[   22.692044] CPU0 attaching sched-domain:
[   22.692047]  domain 0: span 0-1 level MC
[   22.692049]   groups: 0 1
[   22.692052]   domain 1: span 0-1 level CPU
[   22.692054]    groups: 0-1 (__cpu_power = 2048)
[   22.692058] CPU1 attaching sched-domain:
[   22.692059]  domain 0: span 0-1 level MC
[   22.692061]   groups: 1 0
[   22.692064]   domain 1: span 0-1 level CPU
[   22.692066]    groups: 0-1 (__cpu_power = 2048)
[   24.601273] [fglrx] Gart USWC size:627 M.
[   24.601276] [fglrx] Gart cacheable size:247 M.
[   24.601281] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   24.601283] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[   24.601285] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[   28.279369] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   29.214826] CPU0 attaching NULL sched-domain.
[   29.214831] CPU1 attaching NULL sched-domain.
[   29.228562] CPU0 attaching sched-domain:
[   29.228565]  domain 0: span 0-1 level MC
[   29.228567]   groups: 0 1
[   29.228572] CPU1 attaching sched-domain:
[   29.228573]  domain 0: span 0-1 level MC
[   29.228575]   groups: 1 0
[   38.425256] UDF-fs: No VRS found
[   38.425259] UDF-fs: No partition found (1)
[   38.487244] ISO 9660 Extensions: Microsoft Joliet Level 3
[   38.492240] ISOFS: changing to secondary root
[  119.733904] PPP BSD Compression module registered
[  119.751148] PPP Deflate Compression module registered
[ 1129.632927] usb 1-1: USB disconnect, address 2
[ 1150.592023] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 1150.725707] usb 1-1: configuration #1 chosen from 1 choice

se ho ben interpretato la vede come usb e basta...

[superlex]

Sì infatti..  Boh non so come aiutarti 

è come se non esistessero moduli in grado di riconoscierla..