tool kismet
tool kismet
ciao a tutti
sono una persona nuova del gruppo!
dovrei istallare su ubuntu server 16.04 il tool kismet.
non ho mai programmato su linux, vorrei chiedervi un aiuto!
ho istallato una macchina virtuale, ora che devo fare?
per caso devo creare prima un access point?
sono una persona nuova del gruppo!
dovrei istallare su ubuntu server 16.04 il tool kismet.
non ho mai programmato su linux, vorrei chiedervi un aiuto!
ho istallato una macchina virtuale, ora che devo fare?
per caso devo creare prima un access point?
- thece
- Tenace Tecnocrate
- Messaggi: 12947
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: tool kismet
e benvenuto sul Forum
Ti faccio il quiz di ingresso: uno di questi cinque termini non è visto di buon occhio qui sul Forum a causa delle derive che potrebbe avere. Indovina quale è.
- ubuntu server
- macchina virtuale
- programmazione
- kismet
- access point
Ti faccio il quiz di ingresso: uno di questi cinque termini non è visto di buon occhio qui sul Forum a causa delle derive che potrebbe avere. Indovina quale è.
- ubuntu server
- macchina virtuale
- programmazione
- kismet
- access point
- Mdfalcubo
- Moderatore Globale
- Messaggi: 20415
- Iscrizione: venerdì 26 dicembre 2008, 11:17
- Desktop: Solo XFCE
- Distribuzione: Xubuntu 64 bit
- Sesso: Maschile
Re: tool kismet
Pensiamo prima di tutto a dare supporto, per quanto sia lodevole il tuo intento, thece
"Il genere umano è stimolante, è la gente che non sopporto,, (Linus - Peanuts)
- thece
- Tenace Tecnocrate
- Messaggi: 12947
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: tool kismet
@mdfalcubo
voleva essere un modo simpatico per dire di prestare attenzione al contenuto delle richieste. Tengo a bada la deriva
Per ritornare "On Topic": la VM con Ubuntu Server l'hai creata, bene. Il tool kismet non credo, quindi puoi procedere alla sua installazione dai repository di Ubuntu.
Il fatto che non sai programmare potrebbe essere del tutto ininfluente. Per l'access point: si, ti serve almeno un access point funzionante. Crearne uno? Forse no, magari basta quello del tuo modem / router
voleva essere un modo simpatico per dire di prestare attenzione al contenuto delle richieste. Tengo a bada la deriva
Per ritornare "On Topic": la VM con Ubuntu Server l'hai creata, bene. Il tool kismet non credo, quindi puoi procedere alla sua installazione dai repository di Ubuntu.
Il fatto che non sai programmare potrebbe essere del tutto ininfluente. Per l'access point: si, ti serve almeno un access point funzionante. Crearne uno? Forse no, magari basta quello del tuo modem / router
- Mdfalcubo
- Moderatore Globale
- Messaggi: 20415
- Iscrizione: venerdì 26 dicembre 2008, 11:17
- Desktop: Solo XFCE
- Distribuzione: Xubuntu 64 bit
- Sesso: Maschile
Re: tool kismet
Lo avevo capito, tranquillo
"Il genere umano è stimolante, è la gente che non sopporto,, (Linus - Peanuts)
- thece
- Tenace Tecnocrate
- Messaggi: 12947
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: tool kismet
Lo soMdfalcubo [url=http://forum.ubuntu-it.org/viewtopic.php?p=4982410#p4982410][img]http://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:Lo avevo capito, tranquillo
Re: tool kismet
SCUSATE, SE SONO STATO INOPPORTUNO.
INIZIALMENTE HO PENSATO DI UTILIZZARE QUELLO DEL MIO PC, QUINI SONO ANDATO A CERCARE LA SCHEDA DI RETE.
TROVATA QUELLA, HO SCARICATO IL TOOL, MA MI OCCORRONO DETERMINATI VALORI.
ORA VI POSTO COSA HO FATTO.
GRAZIE MILLE
INIZIALMENTE HO PENSATO DI UTILIZZARE QUELLO DEL MIO PC, QUINI SONO ANDATO A CERCARE LA SCHEDA DI RETE.
TROVATA QUELLA, HO SCARICATO IL TOOL, MA MI OCCORRONO DETERMINATI VALORI.
ORA VI POSTO COSA HO FATTO.
GRAZIE MILLE
Re: tool kismet
iL PROBLEMA ORA è CHE NON MI FA ISTALLARE NIENTE, POICHè MI DICE
Codice: Seleziona tutto
ERR http://it.archive.ubuntu.com trusty In release
Impossibile risolvere "it.archive.ubuntu.com"
E: impossibile recuperare http://it-archive.ubuntu.com/ubuntu/pool/...
- thece
- Tenace Tecnocrate
- Messaggi: 12947
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: tool kismet
Hai detto che hai installato Ubuntu Server 16.04 - Xenial . L'errore che riporti si riferisce a Ubuntu Server 14.04 - Trusty. Sei sicuro di avere i repository configurati correttamente?
... posta gli output di questi comandi
Hai verificato se la "rete" funziona?
... posta gli output di questi comandi
dove INDIRIZZO_IP_GATEWAY è quello che viene fuori dal comando route di cui sopra, riga che inizia con 0.0.0.0, colonna Gateway
... posta gli output di questi comandi
Codice: Seleziona tutto
cat /etc/apt/sources.list
Codice: Seleziona tutto
ls -l /etc/apt/sources.list.d/
Hai verificato se la "rete" funziona?
... posta gli output di questi comandi
Codice: Seleziona tutto
ifconfig
Codice: Seleziona tutto
route -n
Codice: Seleziona tutto
cat /etc/resolv.conf
Codice: Seleziona tutto
ping -c 4 INDIRIZZO_IP_GATEWAY
Codice: Seleziona tutto
ping -c 4 8.8.8.8
Codice: Seleziona tutto
dig -t any google.it
Codice: Seleziona tutto
ping -c 4 google.it
Re: tool kismet
rISOLTO!!
NON AVEVO MESSO NAT NELLA CONNESSIONE DI RETE!
NON AVEVO MESSO NAT NELLA CONNESSIONE DI RETE!
Re: tool kismet
Grazie mille thece!!
ora che ho istallato kismet che devo fare?
Logicamente credo sia da configurare...
con sudo gedit /etc/kismet/kismet.conf
prims di fare questo ho istallato gedit e mi compre una finestra
kismet.conf(etc/kismed) gedit
ora che ho istallato kismet che devo fare?
Logicamente credo sia da configurare...
con sudo gedit /etc/kismet/kismet.conf
prims di fare questo ho istallato gedit e mi compre una finestra
kismet.conf(etc/kismed) gedit
Re: tool kismet
Codice: Seleziona tutto
Kismet config file
# Most of the "static" configs have been moved to here -- the command line
# config was getting way too crowded and cryptic. We want functionality,
# not continually reading --help!
# Version of Kismet config
version=2009-newcore
# Name of server (Purely for organizational purposes)
# If commented out, defaults to host name of system
# servername=Kismet Server
# Prefix of where we log (as used in the logtemplate later)
# logprefix=/some/path/to/logs
# Do we process the contents of data frames? If this is enabled, data
# frames will be truncated to the headers only immediately after frame type
# detection. This will disable IP detection, etc, however it is likely
# safer (and definitely more polite) if monitoring networks you do not own.
# hidedata=true
# Do we allow plugins to be used? This will load plugins from the system
# and user plugin directiories when set to true (See the README for the default
# plugin locations).
allowplugins=true
# See the README for full information on the new source format
# ncsource=interface:options
# for example:
# ncsource=wlan0
# ncsource=wifi0:type=madwifi
# ncsource=wlan0:name=intel,hop=false,channel=11
# Comma-separated list of sources to enable. This is only needed if you defined
# multiple sources and only want to enable some of them. By default, all defined
# sources are enabled.
# For example, if sources with name=prismsource and name=ciscosource are defined,
# and you only want to enable those two:
# enablesources=prismsource,ciscosource
# Control which channels we like to spend more time on. By default, the list
# of channels is pulled from the driver automatically. By setting preferred channels,
# if they are present in the channel list, they'll be set with a timing delay so that
# more time is spent on them. Since 1, 6, 11 are the common default channels, it makes
# sense to spend more time monitoring them.
# For finer control, see further down in the config for the channellist= directives.
preferredchannels=1,6,11
# How many channels per second do we hop? (1-10)
channelvelocity=3
# By setting the dwell time for channel hopping we override the channelvelocity
# setting above and dwell on each channel for the given number of seconds.
#channeldwell=10
# Channels are defined as:
# channellist=name:ch1,ch2,ch3
# or
# channellist=name:range-start-end-width-offset,ch,range,ch,...
#
# Channels may be a numeric channel or a frequency
#
# Channels may specify an additional wait period. For common default channels,
# an additional wait period can be useful. Wait periods delay for that number
# of times per second - so a configuration hopping 10 times per second with a
# channel of 6:3 would delay 3/10ths of a second on channel 6.
#
# Channel lists may have up to 256 channels and ranges (combined). For power
# users scanning more than 256 channels with a single card, ranges must be used.
#
# Ranges are meant for "power users" who wish to define a very large number of
# channels. A range may specify channels or frequencies, and will automatically
# sort themselves to cover channels in a non-overlapping fashion. An example
# range for the normal 802.11b/g spectrum would be:
- giulux
- Amministratore
- Messaggi: 25426
- Iscrizione: domenica 10 gennaio 2010, 12:17
- Desktop: ubuntu 18.04
- Distribuzione: Ubuntu 18.04.3 LTS x86_64
- Sesso: Maschile
- Località: Roma
Re: tool kismet
Spiacente, ma politica del forum è di consentire il supporto all'installazione di questo genere di programmi, non al loro uso.
Chiudo.
Chiudo.
"Non è una segno di buona salute l'essere ben adattato ad una società malata". (Jiddu Krishnarmurti)
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 8 ospiti