Ubuntu 10.04 su Acer Timelinex 4820TG
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Anch'io confermo, provata la 10.10 alpha 1 e la maggior parte dei problemi rimangono. Grazie al nuovo kernel invece sono stati risolti: scheda di rete integrata funionante out of the box e wifi abilitato all'avvio
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Arrivato ieri, tutto contento lo apro lo avvio configuro windows e subito mi vengono giramenti di testa allora spengo e installo crunchbang 10 e rilevo più o meno tutti i problemi elencati fino adesso, però l' indicatore della batteria viene caricato anche se mi senga la batteria a zero, al contario di ubuntu che l' indicatore non me lo visualizza nemmeno.
Visto che crunchbang 10 è una alpha 1 dico "ora provo ubuntu e sicuramente funzionerà tutto" invece stessi problemi :'( provo la versione 32 bit e niente cambia però il tasto in alto a destra vicino allo eject se lo premo fa accendere e spegnere la luce blu, ma a cosa serve quel tasto? serve per passare da una scheda grafica all' altra?
Comunque non contento ho fatto un' altra prova, mi sono scaricato Sabayon 5.3 con kde sempre in 32 bit
sorpresa sorpresa..non si è neanche avviato e se non ho visto male usa un kernel più aggiornato di Ubuntu.
Spero che presto si risolvano questi problemi, per il momento almeno quelli della batteria e della scheda video.
Ciao.
Visto che crunchbang 10 è una alpha 1 dico "ora provo ubuntu e sicuramente funzionerà tutto" invece stessi problemi :'( provo la versione 32 bit e niente cambia però il tasto in alto a destra vicino allo eject se lo premo fa accendere e spegnere la luce blu, ma a cosa serve quel tasto? serve per passare da una scheda grafica all' altra?
Comunque non contento ho fatto un' altra prova, mi sono scaricato Sabayon 5.3 con kde sempre in 32 bit
sorpresa sorpresa..non si è neanche avviato e se non ho visto male usa un kernel più aggiornato di Ubuntu.
Spero che presto si risolvano questi problemi, per il momento almeno quelli della batteria e della scheda video.
Ciao.
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Appena compro il portatile guardo cosa si può fare. Se dopo l'acquisto non esce nulla di nuovo per l'acpi, ci darò un'occhiata io.
Per la scheda video con un po' di smadonnamenti ce la si può fare(per lo switch della scheda a caldo), ma non aspettatevi 3d dalla ati ancora. Il chip è uscito a febbraio ed è relativamente nuovo. Abbiamo accelerazione 2d e KMS dai driver open source con il 3d in arrivo presto. Le opzioni sono queste:
* usare xf86-video-ati con KMS e 2D e vga_switcheroo per switchare a caldo (intel ha 3d, anche se un po' più scarsino)
* usare il driver proprietario ati, ma scordarsi KMS e vga_switcheroo. Lo switch della scheda si fa da BIOS
cheers
PS. hi Trevinho, vedi che non soltanto il Freerunner ci accomuna?
Per la scheda video con un po' di smadonnamenti ce la si può fare(per lo switch della scheda a caldo), ma non aspettatevi 3d dalla ati ancora. Il chip è uscito a febbraio ed è relativamente nuovo. Abbiamo accelerazione 2d e KMS dai driver open source con il 3d in arrivo presto. Le opzioni sono queste:
* usare xf86-video-ati con KMS e 2D e vga_switcheroo per switchare a caldo (intel ha 3d, anche se un po' più scarsino)
* usare il driver proprietario ati, ma scordarsi KMS e vga_switcheroo. Lo switch della scheda si fa da BIOS
cheers
PS. hi Trevinho, vedi che non soltanto il Freerunner ci accomuna?
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Qualcuno può farmi un
poi un con questo portatile?
Sono molto curioso se il modulo acer-wmi è caricato.
Codice: Seleziona tutto
lsmod
Codice: Seleziona tutto
lspci
Sono molto curioso se il modulo acer-wmi è caricato.
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
lsmod
lspci
spero possa servire a qualcosa
la cosa più fastidiosa è la batteria che non viene rilevata
Aggiungo anche che se vado in preferenze audio e seleziono Hardware - "redwood HDMI Audio" e uscita - "redwood HDMI Audio"
non si sente niente.
Codice: Seleziona tutto
Module Size Used by
binfmt_misc 6587 1
ppdev 5259 0
joydev 8708 0
arc4 1153 2
snd_hda_codec_atihdmi 2367 1
snd_hda_codec_realtek 203170 1
snd_hda_intel 22005 2
snd_hda_codec 74201 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70886 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
ath9k 306301 0
uvcvideo 57022 0
fbcon 35102 71
fglrx 2093229 34
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
mac80211 204922 1 ath9k
ath 7611 1 ath9k
tileblit 2031 1 fbcon
videodev 34361 1 uvcvideo
font 7557 1 fbcon
v4l1_compat 13251 2 uvcvideo,videodev
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
psmouse 63245 0
intel_agp 24473 0
snd 54148 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
cfg80211 126517 3 ath9k,mac80211,ath
acer_wmi 13861 0
led_class 2864 2 ath9k,acer_wmi
video 17375 0
serio_raw 3978 0
vga16fb 11385 1
output 1871 1 video
vgastate 8961 1 vga16fb
agpgart 31788 2 fglrx,intel_agp
soundcore 6620 1 snd
snd_page_alloc 7172 2 snd_hda_intel,snd_pcm
lp 7028 0
parport 32635 2 ppdev,lp
ahci 32040 2
Codice: Seleziona tutto
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
la cosa più fastidiosa è la batteria che non viene rilevata
Aggiungo anche che se vado in preferenze audio e seleziono Hardware - "redwood HDMI Audio" e uscita - "redwood HDMI Audio"
non si sente niente.
Ultima modifica di sistema09 il venerdì 11 giugno 2010, 13:11, modificato 1 volta in totale.
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
grazie mille.
Da quel che vedo acer-wmi viene caricato, ma si incasina con il DSDT. C'è da inviare il dsdt al mantainer di acer-wmi. (in teoria fixare questo vorrebbe dire sistemare il problema della batteria)
bisogna aggiornare alsa per avere audio funzionante da quanto ne so, e poi output HDMI dovrebbe essere l'uscita via cavo HDMI(appunto) e non quella delle casse Ops, è il nome della scheda.
Potresti fare anche un?
Da quel che vedo acer-wmi viene caricato, ma si incasina con il DSDT. C'è da inviare il dsdt al mantainer di acer-wmi. (in teoria fixare questo vorrebbe dire sistemare il problema della batteria)
bisogna aggiornare alsa per avere audio funzionante da quanto ne so, e poi output HDMI dovrebbe essere l'uscita via cavo HDMI(appunto) e non quella delle casse Ops, è il nome della scheda.
Potresti fare anche un
Codice: Seleziona tutto
dmesg
Ultima modifica di admiral0 il venerdì 11 giugno 2010, 13:28, modificato 1 volta in totale.
-
- Prode Principiante
- Messaggi: 54
- Iscrizione: sabato 8 maggio 2010, 0:28
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Ciao admiral0, volevo chiederti delle cose:
la prima riguarda il DSDT, in realtà la DSDT non è la tabella che il BIOS passa al sistema operativo per la gestione delle varie funzioni ACPI?
la seconda è: come si può fare a far risolvere il bug che abbiamo dal mantainer di acer-wmi? come si contatta?
la prima riguarda il DSDT, in realtà la DSDT non è la tabella che il BIOS passa al sistema operativo per la gestione delle varie funzioni ACPI?
la seconda è: come si può fare a far risolvere il bug che abbiamo dal mantainer di acer-wmi? come si contatta?
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
ecco qua:
si si è il nome della scheda audio non so se dipende dai driver Ati.
Codice: Seleziona tutto
[ 0.581503] pnp 00:05: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 13 (0x1000-0x1fff), disabling
[ 0.582889] pnp: PnP ACPI: found 11 devices
[ 0.582891] ACPI: ACPI bus type pnp unregistered
[ 0.582894] PnPBIOS: Disabled by ACPI PNP
[ 0.582906] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.582908] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.582910] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.582912] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.582914] system 00:05: ioport range 0x400-0x47f has been reserved
[ 0.582916] system 00:05: ioport range 0x500-0x57f has been reserved
[ 0.582922] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.582924] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.582926] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.582928] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.582930] system 00:09: iomem range 0xf0000000-0xf1ffffff has been reserved
[ 0.582932] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.582935] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.582937] system 00:09: iomem range 0xff000000-0xffffffff could not be reserved
[ 0.582939] system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.582941] system 00:09: iomem range 0xdc600000-0xdc600fff has been reserved
[ 0.617522] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.617570] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.617573] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.617576] pci 0000:00:01.0: MEM window: 0xdc400000-0xdc4fffff
[ 0.617579] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.617582] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.617585] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.617591] pci 0000:00:1c.0: MEM window: 0xdb400000-0xdc3fffff
[ 0.617596] pci 0000:00:1c.0: PREFETCH window: 0x000000d8400000-0x000000d93fffff
[ 0.617604] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
[ 0.617607] pci 0000:00:1c.5: IO window: 0x1000-0x1fff
[ 0.617613] pci 0000:00:1c.5: MEM window: 0xda400000-0xdb3fffff
[ 0.617618] pci 0000:00:1c.5: PREFETCH window: 0x000000d9400000-0x000000da3fffff
[ 0.617625] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.617626] pci 0000:00:1e.0: IO window: disabled
[ 0.617632] pci 0000:00:1e.0: MEM window: disabled
[ 0.617636] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.617653] alloc irq_desc for 16 on node -1
[ 0.617654] alloc kstat_irqs on node -1
[ 0.617660] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.617664] pci 0000:00:01.0: setting latency timer to 64
[ 0.617673] alloc irq_desc for 17 on node -1
[ 0.617674] alloc kstat_irqs on node -1
[ 0.617677] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.617681] pci 0000:00:1c.0: setting latency timer to 64
[ 0.617691] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.617695] pci 0000:00:1c.5: setting latency timer to 64
[ 0.617703] pci 0000:00:1e.0: setting latency timer to 64
[ 0.617708] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.617710] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.617712] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.617714] pci_bus 0000:01: resource 1 mem: [0xdc400000-0xdc4fffff]
[ 0.617716] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.617718] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.617720] pci_bus 0000:02: resource 1 mem: [0xdb400000-0xdc3fffff]
[ 0.617722] pci_bus 0000:02: resource 2 pref mem [0xd8400000-0xd93fffff]
[ 0.617724] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.617725] pci_bus 0000:03: resource 1 mem: [0xda400000-0xdb3fffff]
[ 0.617727] pci_bus 0000:03: resource 2 pref mem [0xd9400000-0xda3fffff]
[ 0.617729] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.617731] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.617733] pci_bus 0000:7f: resource 0 io: [0x00-0xffff]
[ 0.617735] pci_bus 0000:7f: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.617765] NET: Registered protocol family 2
[ 0.617842] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.618060] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.618648] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.618939] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.618941] TCP reno registered
[ 0.619002] NET: Registered protocol family 1
[ 0.619015] pci 0000:00:02.0: Boot video device
[ 0.650153] Simple Boot Flag at 0x44 set to 0x1
[ 0.650385] cpufreq-nforce2: No nForce2 chipset.
[ 0.650405] Scanning for low memory corruption every 60 seconds
[ 0.650494] audit: initializing netlink socket (disabled)
[ 0.650505] type=2000 audit(1276264060.479:1): initialized
[ 0.659396] highmem bounce pool size: 64 pages
[ 0.659401] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.660437] VFS: Disk quotas dquot_6.5.2
[ 0.660479] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.660887] fuse init (API version 7.13)
[ 0.660947] msgmni has been set to 1618
[ 0.661137] alg: No test for stdrng (krng)
[ 0.661181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.661184] io scheduler noop registered
[ 0.661185] io scheduler anticipatory registered
[ 0.661186] io scheduler deadline registered
[ 0.661214] io scheduler cfq registered (default)
[ 0.661324] alloc irq_desc for 29 on node -1
[ 0.661326] alloc kstat_irqs on node -1
[ 0.661333] pcieport 0000:00:01.0: irq 29 for MSI/MSI-X
[ 0.661338] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.661439] alloc irq_desc for 30 on node -1
[ 0.661441] alloc kstat_irqs on node -1
[ 0.661448] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
[ 0.661458] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.661585] alloc irq_desc for 31 on node -1
[ 0.661586] alloc kstat_irqs on node -1
[ 0.661594] pcieport 0000:00:1c.5: irq 31 for MSI/MSI-X
[ 0.661603] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.661679] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.661829] _OSC invalid UUID
[ 0.661948] _OSC invalid UUID
[ 0.662072] _OSC invalid UUID
[ 0.662187] _OSC invalid UUID
[ 0.662203] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.662518] ACPI: AC Adapter [ACAD] (on-line)
[ 0.662573] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
[ 0.662576] ACPI: Power Button [PWRB]
[ 0.662605] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input1
[ 0.662666] ACPI: Lid Switch [LID0]
[ 0.662695] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input2
[ 0.662697] ACPI: Sleep Button [SLPB]
[ 0.662726] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.662728] ACPI: Power Button [PWRF]
[ 0.664034] ACPI: SSDT b3691c18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.664755] ACPI: SSDT b368f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.665331] Monitor-Mwait will be used to enter C-1 state
[ 0.665357] Monitor-Mwait will be used to enter C-3 state
[ 0.665394] processor LNXCPU:00: registered as cooling_device0
[ 0.665939] ACPI: SSDT b3690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.666487] ACPI: SSDT b368ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.667171] processor LNXCPU:01: registered as cooling_device1
[ 0.668085] processor LNXCPU:02: registered as cooling_device2
[ 0.670391] processor LNXCPU:03: registered as cooling_device3
[ 0.674349] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.674355] ACPI: Thermal Zone [THRM] (40 C)
[ 0.674505] isapnp: Scanning for PnP cards...
[ 0.674876] ACPI: Battery Slot [BAT1] (battery present)
[ 0.675767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.676963] brd: module loaded
[ 0.677389] loop: module loaded
[ 0.677475] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.677866] Fixed MDIO Bus: probed
[ 0.677897] PPP generic driver version 2.4.2
[ 0.677925] tun: Universal TUN/TAP device driver, 1.6
[ 0.677927] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.678005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.678029] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.678043] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.678047] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.678075] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.678104] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.681997] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 0.682015] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdc505c00
[ 0.693945] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.694047] usb usb1: configuration #1 chosen from 1 choice
[ 0.694075] hub 1-0:1.0: USB hub found
[ 0.694083] hub 1-0:1.0: 3 ports detected
[ 0.694145] alloc irq_desc for 23 on node -1
[ 0.694148] alloc kstat_irqs on node -1
[ 0.694155] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.694176] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.694180] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.694218] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.694247] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.698144] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 0.698163] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdc505800
[ 0.706182] Freeing initrd memory: 7721k freed
[ 0.713917] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.714040] usb usb2: configuration #1 chosen from 1 choice
[ 0.714068] hub 2-0:1.0: USB hub found
[ 0.714078] hub 2-0:1.0: 3 ports detected
[ 0.714137] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.714153] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.714238] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.720508] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.724139] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.724147] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.724150] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.724153] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.724155] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.724225] mice: PS/2 mouse device common for all mice
[ 0.724352] rtc_cmos 00:06: RTC can wake from S4
[ 0.724387] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.724419] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.724513] device-mapper: uevent: version 1.0.3
[ 0.724643] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.724727] device-mapper: multipath: version 1.1.0 loaded
[ 0.724729] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.724827] EISA: Probing bus 0 at eisa.0
[ 0.724834] Cannot allocate resource for EISA slot 1
[ 0.724836] Cannot allocate resource for EISA slot 2
[ 0.724838] Cannot allocate resource for EISA slot 3
[ 0.724840] Cannot allocate resource for EISA slot 4
[ 0.724858] EISA: Detected 0 cards.
[ 0.725063] cpuidle: using governor ladder
[ 0.725212] cpuidle: using governor menu
[ 0.725650] TCP cubic registered
[ 0.725793] NET: Registered protocol family 10
[ 0.726229] lo: Disabled Privacy Extensions
[ 0.726526] NET: Registered protocol family 17
[ 0.728048] Using IPI No-Shortcut mode
[ 0.728108] PM: Resume from disk failed.
[ 0.728120] registered taskstats version 1
[ 0.728600] Magic number: 14:439:786
[ 0.728685] rtc_cmos 00:06: setting system clock to 2010-06-11 13:47:41 UTC (1276264061)
[ 0.728688] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.728690] EDD information not available.
[ 0.745857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.005367] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.041877] isapnp: No Plug & Play device found
[ 1.041893] Freeing unused kernel memory: 672k freed
[ 1.042146] Write protecting the kernel text: 4828k
[ 1.042208] Write protecting the kernel read-only data: 1876k
[ 1.055363] udev: starting version 151
[ 1.108005] ahci 0000:00:1f.2: version 3.0
[ 1.108028] alloc irq_desc for 19 on node -1
[ 1.108031] alloc kstat_irqs on node -1
[ 1.108039] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.108088] alloc irq_desc for 32 on node -1
[ 1.108090] alloc kstat_irqs on node -1
[ 1.108100] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 1.108138] ahci: SSS flag set, parallel bus scan disabled
[ 1.108178] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.108182] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 1.108190] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.120628] scsi0 : ahci
[ 1.120765] scsi1 : ahci
[ 1.120831] scsi2 : ahci
[ 1.120900] scsi3 : ahci
[ 1.121014] ata1: SATA max UDMA/133 abar m2048@0xdc505000 port 0xdc505100 irq 32
[ 1.121019] ata2: SATA max UDMA/133 abar m2048@0xdc505000 port 0xdc505180 irq 32
[ 1.121021] ata3: DUMMY
[ 1.121022] ata4: DUMMY
[ 1.137682] usb 1-1: configuration #1 chosen from 1 choice
[ 1.137763] hub 1-1:1.0: USB hub found
[ 1.137858] hub 1-1:1.0: 6 ports detected
[ 1.249560] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.381722] usb 2-1: configuration #1 chosen from 1 choice
[ 1.381819] hub 2-1:1.0: USB hub found
[ 1.381953] hub 2-1:1.0: 8 ports detected
[ 1.437294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.439563] ata1.00: ATA-8: WDC WD6400BEVT-22A0RT0, 01.01A01, max UDMA/133
[ 1.439568] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.442101] ata1.00: configured for UDMA/133
[ 1.457383] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-2 01.0 PQ: 0 ANSI: 5
[ 1.457524] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.457540] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[ 1.457548] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.457607] sd 0:0:0:0: [sda] Write Protect is off
[ 1.457610] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.457624] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.457719] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.545681] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.587443] usb 1-1.1: configuration #1 chosen from 1 choice
[ 2.179951] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.184132] ata2.00: ACPI _SDD failed (AE 0x5)
[ 7.490278] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.494454] ata2.00: ACPI _SDD failed (AE 0x5)
[ 7.494458] ata2.00: ACPI: failed the second time, disabled
[ 7.495538] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, AP04, max UDMA/133, ATAPI AN
[ 7.500968] ata2.00: configured for UDMA/133
[ 7.521442] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N AP04 PQ: 0 ANSI: 5
[ 7.532796] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.532801] Uniform CD-ROM driver Revision: 3.20
[ 7.532912] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.532967] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.356818] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 17.646445] udev: starting version 151
[ 17.708036] lp: driver loaded but no devices found
[ 17.716683] Linux agpgart interface v0.103
[ 17.762150] Adding 8474616k swap on /dev/sda6. Priority:-1 extents:1 across:8474616k
[ 17.798468] cfg80211: Calling CRDA to update world regulatory domain
[ 17.802279] vga16fb: initializing
[ 17.802282] vga16fb: mapped to 0xc00a0000
[ 17.802338] fb0: VGA16 VGA frame buffer device
[ 17.810206] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 17.810960] acer-wmi: Brightness must be controlled by generic video driver
[ 17.814956] Linux video capture interface: v2.00
[ 17.815563] agpgart-intel 0000:00:00.0: Intel IGDNG/M Chipset
[ 17.816332] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 17.823612] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[ 17.841189] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6
[ 17.841243] usbcore: registered new interface driver uvcvideo
[ 17.841246] USB Video Class driver (v0.1.0)
[ 17.864432] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.864444] ath9k 0000:03:00.0: setting latency timer to 64
[ 17.905339] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 17.913961] type=1505 audit(1276256878.713:2): operation="profile_load" pid=747 name="/sbin/dhclient3"
[ 17.914475] type=1505 audit(1276256878.713:3): operation="profile_load" pid=747 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.914751] type=1505 audit(1276256878.713:4): operation="profile_load" pid=747 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.940280] cfg80211: World regulatory domain updated:
[ 17.940283] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.940286] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.940288] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.940291] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.940293] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.940295] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.971979] HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 17.971988] alloc irq_desc for 22 on node -1
[ 17.971990] alloc kstat_irqs on node -1
[ 17.971998] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.972048] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.975375] Console: switching to colour frame buffer device 80x30
[ 18.302246] ath: EEPROM regdomain: 0x65
[ 18.302249] ath: EEPROM indicates we should expect a direct regpair map
[ 18.302252] ath: Country alpha2 being used: 00
[ 18.302254] ath: Regpair used: 0x65
[ 18.379192] hda_codec: ALC269: BIOS auto-probing.
[ 18.379401] hda_codec: connection list not available for 0x24
[ 18.379703] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 18.379855] [drm] Initialized drm 1.1.0 20060810
[ 18.380763] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 18.381309] Registered led device: ath9k-phy0::radio
[ 18.381327] Registered led device: ath9k-phy0::assoc
[ 18.381341] Registered led device: ath9k-phy0::tx
[ 18.381359] Registered led device: ath9k-phy0::rx
[ 18.381388] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8ac0000, irq=17
[ 18.385300] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 18.385332] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 18.489843] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000
[ 18.537309] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 18.538880] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.538884] i915 0000:00:02.0: setting latency timer to 64
[ 18.544837] mtrr: no more MTRRs available
[ 18.544841] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 18.544891] alloc irq_desc for 33 on node -1
[ 18.544893] alloc kstat_irqs on node -1
[ 18.544901] i915 0000:00:02.0: irq 33 for MSI/MSI-X
[ 18.544905] [drm] set up 127M of stolen space
[ 19.052470] fb1: inteldrmfb frame buffer device
[ 19.052472] registered panic notifier
[ 19.053391] ACPI Warning: _BQC returned an invalid level (20090903/video-631)
[ 19.053987] acpi device:01: registered as cooling_device4
[ 19.054992] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 19.055021] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.055047] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 19.056602] acpi device:0a: registered as cooling_device5
[ 19.057444] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input10
[ 19.057489] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 19.057626] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 19.337098] type=1505 audit(1276256880.138:5): operation="profile_load" pid=978 name="/usr/share/gdm/guest-session/Xsession"
[ 19.338258] type=1505 audit(1276256880.142:6): operation="profile_replace" pid=979 name="/sbin/dhclient3"
[ 19.338674] type=1505 audit(1276256880.142:7): operation="profile_replace" pid=979 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 19.338900] type=1505 audit(1276256880.142:8): operation="profile_replace" pid=979 name="/usr/lib/connman/scripts/dhclient-script"
[ 19.341033] type=1505 audit(1276256880.142:9): operation="profile_load" pid=980 name="/usr/bin/evince"
[ 19.346300] type=1505 audit(1276256880.150:10): operation="profile_load" pid=980 name="/usr/bin/evince-previewer"
[ 19.349593] type=1505 audit(1276256880.154:11): operation="profile_load" pid=980 name="/usr/bin/evince-thumbnailer"
[ 19.973127] ppdev: user-space parallel port driver
[ 20.175241] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 20.175244] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 20.501636] CPU0 attaching NULL sched-domain.
[ 20.501641] CPU1 attaching NULL sched-domain.
[ 20.501643] CPU2 attaching NULL sched-domain.
[ 20.501644] CPU3 attaching NULL sched-domain.
[ 20.543069] CPU0 attaching sched-domain:
[ 20.543075] domain 0: span 0-1 level SIBLING
[ 20.543079] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 20.543086] domain 1: span 0-3 level MC
[ 20.543089] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 20.543098] CPU1 attaching sched-domain:
[ 20.543101] domain 0: span 0-1 level SIBLING
[ 20.543104] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 20.543110] domain 1: span 0-3 level MC
[ 20.543113] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 20.543120] CPU2 attaching sched-domain:
[ 20.543123] domain 0: span 2-3 level SIBLING
[ 20.543128] groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[ 20.543132] domain 1: span 0-3 level MC
[ 20.543133] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 20.543137] CPU3 attaching sched-domain:
[ 20.543139] domain 0: span 2-3 level SIBLING
[ 20.543140] groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[ 20.543144] domain 1: span 0-3 level MC
[ 20.543146] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 20.543520] CPU0 attaching NULL sched-domain.
[ 20.543522] CPU1 attaching NULL sched-domain.
[ 20.543524] CPU2 attaching NULL sched-domain.
[ 20.543525] CPU3 attaching NULL sched-domain.
[ 20.587008] CPU0 attaching sched-domain:
[ 20.587012] domain 0: span 0-1 level SIBLING
[ 20.587016] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 20.587023] domain 1: span 0-3 level MC
[ 20.587026] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 20.587034] CPU1 attaching sched-domain:
[ 20.587037] domain 0: span 0-1 level SIBLING
[ 20.587040] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 20.587046] domain 1: span 0-3 level MC
[ 20.587049] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 20.587056] CPU2 attaching sched-domain:
[ 20.587059] domain 0: span 2-3 level SIBLING
[ 20.587062] groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[ 20.587068] domain 1: span 0-3 level MC
[ 20.587071] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 20.587078] CPU3 attaching sched-domain:
[ 20.587080] domain 0: span 2-3 level SIBLING
[ 20.587083] groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[ 20.587091] domain 1: span 0-3 level MC
[ 20.587093] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 22.341775] CPU0 attaching NULL sched-domain.
[ 22.341781] CPU1 attaching NULL sched-domain.
[ 22.341784] CPU2 attaching NULL sched-domain.
[ 22.341786] CPU3 attaching NULL sched-domain.
[ 22.375190] CPU0 attaching sched-domain:
[ 22.375194] domain 0: span 0-1 level SIBLING
[ 22.375196] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 22.375200] domain 1: span 0-3 level MC
[ 22.375202] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 22.375208] CPU1 attaching sched-domain:
[ 22.375210] domain 0: span 0-1 level SIBLING
[ 22.375212] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 22.375215] domain 1: span 0-3 level MC
[ 22.375217] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 22.375221] CPU2 attaching sched-domain:
[ 22.375223] domain 0: span 2-3 level SIBLING
[ 22.375224] groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[ 22.375228] domain 1: span 0-3 level MC
[ 22.375229] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 22.375234] CPU3 attaching sched-domain:
[ 22.375235] domain 0: span 2-3 level SIBLING
[ 22.375237] groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[ 22.375240] domain 1: span 0-3 level MC
[ 22.375242] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 22.375600] CPU0 attaching NULL sched-domain.
[ 22.375602] CPU1 attaching NULL sched-domain.
[ 22.375604] CPU2 attaching NULL sched-domain.
[ 22.375605] CPU3 attaching NULL sched-domain.
[ 22.403323] CPU0 attaching sched-domain:
[ 22.403327] domain 0: span 0-1 level SIBLING
[ 22.403329] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 22.403334] domain 1: span 0-3 level MC
[ 22.403335] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 22.403342] CPU1 attaching sched-domain:
[ 22.403343] domain 0: span 0-1 level SIBLING
[ 22.403345] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 22.403348] domain 1: span 0-3 level MC
[ 22.403350] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[ 22.403354] CPU2 attaching sched-domain:
[ 22.403355] domain 0: span 2-3 level SIBLING
[ 22.403357] groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[ 22.403361] domain 1: span 0-3 level MC
[ 22.403362] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 22.403366] CPU3 attaching sched-domain:
[ 22.403368] domain 0: span 2-3 level SIBLING
[ 22.403369] groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[ 22.403373] domain 1: span 0-3 level MC
[ 22.403375] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[ 22.974427] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 40.652965] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 47.967414] wlan0: direct probe to AP 00:25:53:07:f3:d8 (try 1)
[ 47.967438] wlan0: deauthenticating from 00:25:53:07:f3:d8 by local choice (reason=3)
[ 47.967514] wlan0: direct probe to AP 00:25:53:07:f3:d8 (try 1)
[ 47.974586] wlan0: direct probe responded
[ 47.974591] wlan0: authenticate with AP 00:25:53:07:f3:d8 (try 1)
[ 47.976556] wlan0: authenticated
[ 47.976576] wlan0: associate with AP 00:25:53:07:f3:d8 (try 1)
[ 47.979163] wlan0: RX AssocResp from 00:25:53:07:f3:d8 (capab=0x411 status=0 aid=2)
[ 47.979167] wlan0: associated
[ 47.979455] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 58.763063] wlan0: no IPv6 routers present
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Ad una prima occhiata sembra proprio acer-wmihttp://git.kernel.org/?p=linux/kernel/git/lenb/linux-acpi-2.6.git;a=blob;f=drivers/acpi/battery.c;h=3026e3fa83efc82923daf64e1f00fd2b59f23848;hb=HEAD il colpevole di non riportare lo stato della batteria. (bad)
Ultima modifica di admiral0 il venerdì 11 giugno 2010, 15:06, modificato 1 volta in totale.
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
e immagino che soluzioni pratiche non ce ne siano per il momento giusto?
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Pazienta e stringi i denti giovane padawan.
Non mi sono mai addentrato in debugging del kernel. Credo sia la volta buona per iniziare.
Puoi fare un'altra cosa per soddisfare la mia morbosa curiosità?
e uppare da qualche parte quel file? (anche allegato va bene)
vedo almeno se il dsdt si decompila/ricompila senza errori.
Grazie.
Non mi sono mai addentrato in debugging del kernel. Credo sia la volta buona per iniziare.
Puoi fare un'altra cosa per soddisfare la mia morbosa curiosità?
Codice: Seleziona tutto
sudo cp /proc/acpi/dsdt dsdt.hex
vedo almeno se il dsdt si decompila/ricompila senza errori.
Grazie.
Ultima modifica di admiral0 il venerdì 11 giugno 2010, 17:45, modificato 1 volta in totale.
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
1. Esatto. Le possibilità sono che acer-wmi non veda varie cose, ma la cosa che mi preoccupa è che non vedo il codice di gestione batteria specifico per i acer, quindi è probabile che a. Il dsdt è sminchiato. b. sono dei "pasticcioni" e c'è bisogno di codice custom per vedere la batteria.Snake231088 ha scritto: Ciao admiral0, volevo chiederti delle cose:
la prima riguarda il DSDT, in realtà la DSDT non è la tabella che il BIOS passa al sistema operativo per la gestione delle varie funzioni ACPI?
la seconda è: come si può fare a far risolvere il bug che abbiamo dal mantainer di acer-wmi? come si contatta?
2. Bisogna contattare Carlos Corbacho che è l'attuale mantainer di acer-wmi. Vedo se c'è su IRC.
Link utile con la mail http://git.kernel.org/?p=linux/kernel/git/lenb/linux-acpi-2.6.git;a=blob;f=Documentation/laptops/acer-wmi.txt;h=0768fcc3ba3e58966cb73b7c104b2a84f3c2c279;hb=HEAD
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Va bene se ti allego il file dsdt.hex con un link di megaupload?, perchè qui non so se me lo fa allegare avendo un' estensione .hex
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
puoi dargli l'estensione che vuoi
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
che stupido, effettivamente bastava anche creare un file .zip
comunque ecco qua se ho sbagliato qualcosa fammi sapere e vedo di mandarti quello che ti serve correttamente
ciao e grazie
comunque ecco qua se ho sbagliato qualcosa fammi sapere e vedo di mandarti quello che ti serve correttamente
ciao e grazie
- Allegati
-
- dsdt.zip
- (20.04 KiB) Scaricato 67 volte
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Lol. Houston abbiamo un problema...
C'è qualcosa di molto sbagliato nel dsdt. (Fa crashare iasl).
Codice: Seleziona tutto
iasl -d dsdt.hex
Intel ACPI Component Architecture
AML Disassembler version 20100121 [Feb 6 2010]
Copyright (c) 2000 - 2010 Intel Corporation
Supports ACPI Specification Revision 4.0
Loading Acpi table from file dsdt.hex
Acpi table [DSDT] successfully installed and loaded
Pass 1 parse of [DSDT]
Pass 2 parse of [DSDT]
Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions)
...
Parsing completed
iasl: malloc.c:3096: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed.
[1] 13361 abort (core dumped) iasl -d dsdt.hex
-
- Prode Principiante
- Messaggi: 54
- Iscrizione: sabato 8 maggio 2010, 0:28
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
La mia DSDT table sono riuscito a ricompilarla e a togliergli tutti gli error, però poi ho provato con un kernel custom di caricare quella dsdt ma niente da fare! Il kernel non partiva e allora ho lasciato perdere.
La mia DSDT però riguarda un Acer Aspire 5745G e non un TimelineX.
Fatemi sapere se riuscite a risolvere qualcosa.
Ciao
La mia DSDT però riguarda un Acer Aspire 5745G e non un TimelineX.
Fatemi sapere se riuscite a risolvere qualcosa.
Ciao
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Mmmm, mi sa che ci vorrà molto tempo prima che si risolva questo problema ed è già tre volte che non mi accorgo che lampeggia la luce della batteria e mi si spegne di colpo il pc, che fastidio,
immagino che non posso fare altro che aspettare giusto?
mi spiace non poter fare niente per risolvere, io non so neanche come si ricompila una DSDT,
confido in voi!!
immagino che non posso fare altro che aspettare giusto?
mi spiace non poter fare niente per risolvere, io non so neanche come si ricompila una DSDT,
confido in voi!!
Re: Ubuntu 10.04 su Acer Timelinex 4820TG
Ciao, ho visto solo ora che la discussione è andata avanti. Ahime ho guardato qualcosa in rete ma il problema rimane sempre lo stesso. Se può essere d'aiuto allego l'output dei mio sistema ai comandi: lspci, lsmod, dmesg e dsdt.
- Allegati
-
- file.zip
- (35.99 KiB) Scaricato 65 volte
Chi c’è in linea
Visualizzano questa sezione: Google [Bot] e 18 ospiti