ok... ho detto una sciocchezza...kimj ha scritto:dipende dal router.tempesta74 ha scritto:mmmhhh...m3nhir ha scritto:
scusate se mi intrometto...
ma l'indirizzo del router non è 192.168.1.1???
il mio è un belkin e l'ip è 192.168.2.1
[Risolto] [wireless] configurare router wireless
-
- Prode Principiante
- Messaggi: 246
- Iscrizione: giovedì 26 febbraio 2009, 1:40
Re: [wireless] configurare router wireless
Ubuntu User #31836
Re: [wireless] configurare router wireless
ho ancora qualche dubbio... prima di dare dhclient la rete non sembra configurata e funzionante.
quindi, per piacere, fai ciò che ho scritto nel post precedente e posta anche uno screenshot del network manager alla scheda impostazioni ipv4, sulla connessione auto eth0
quindi, per piacere, fai ciò che ho scritto nel post precedente e posta anche uno screenshot del network manager alla scheda impostazioni ipv4, sulla connessione auto eth0
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
ho notato che senza dare sudo dhclient non funziona.
ecco quello che mi hai chiesto:
bix@bix-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:3fa8:92
indirizzo inet6: fe80::212fecd:a892/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:1000
Byte RX:184 (184.0 B) Byte TX:532 (532.0 B)
lo Link encap:Loopback locale
indirizzo inet:127.0.0.1 Maschera:255.0.0.0
indirizzo inet6: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:0
Byte RX:0 (0.0 B) Byte TX:0 (0.0 B)
bix@bix-desktop:~$ ping -c15 192.168.2.1
connect: Network is unreachable
bix@bix-desktop:~$ cd $HOME && touch periferiche.txt && lspci > periferiche.txt
bix@bix-desktop:~$ cd $HOME && touch moduli.txt && lsmod > moduli.txt
bix@bix-desktop:~$
bix@bix-desktop:~$ cd $HOME && touch problemi.txt && sudo dmesg > problemi.txt
ecco quello che mi hai chiesto:
bix@bix-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:3fa8:92
indirizzo inet6: fe80::212fecd:a892/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:1000
Byte RX:184 (184.0 B) Byte TX:532 (532.0 B)
lo Link encap:Loopback locale
indirizzo inet:127.0.0.1 Maschera:255.0.0.0
indirizzo inet6: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:0
Byte RX:0 (0.0 B) Byte TX:0 (0.0 B)
bix@bix-desktop:~$ ping -c15 192.168.2.1
connect: Network is unreachable
bix@bix-desktop:~$ cd $HOME && touch periferiche.txt && lspci > periferiche.txt
bix@bix-desktop:~$ cd $HOME && touch moduli.txt && lsmod > moduli.txt
bix@bix-desktop:~$
bix@bix-desktop:~$ cd $HOME && touch problemi.txt && sudo dmesg > problemi.txt
- Allegati
-
- problemi.txt
- (49.32 KiB) Scaricato 43 volte
-
- periferiche.txt
- (1.54 KiB) Scaricato 37 volte
-
- moduli.txt
- (1.74 KiB) Scaricato 43 volte
Re: [wireless] configurare router wireless
appunto... mi pareva strano.bix ha scritto: ho notato che senza dare sudo dhclient non funziona.
ecco quello che mi hai chiesto:
bix@bix-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:3fa8:92
indirizzo inet6: fe80::212fecd:a892/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:1000
Byte RX:184 (184.0 B) Byte TX:532 (532.0 B)
lo Link encap:Loopback locale
indirizzo inet:127.0.0.1 Maschera:255.0.0.0
indirizzo inet6: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:0
Byte RX:0 (0.0 B) Byte TX:0 (0.0 B)
bix@bix-desktop:~$ ping -c15 192.168.2.1
connect: Network is unreachable
bix@bix-desktop:~$ cd $HOME && touch periferiche.txt && lspci > periferiche.txt
bix@bix-desktop:~$ cd $HOME && touch moduli.txt && lsmod > moduli.txt
bix@bix-desktop:~$
bix@bix-desktop:~$ cd $HOME && touch problemi.txt && sudo dmesg > problemi.txt
potevi evitare gli utlimi 3 comandi
ora, screenshoot del network manager
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
scusa l'ignoranza :-[
il network manager lo trovo in alto a sx giusto?
se è quello che ho allegato come immagine, dove trovo la scheda impostazioni ipv4?
grazie per la pazienza.
il network manager lo trovo in alto a sx giusto?
se è quello che ho allegato come immagine, dove trovo la scheda impostazioni ipv4?
grazie per la pazienza.
Re: [wireless] configurare router wireless
clicca su via cavo, seleziona la connessione, fai modifica e poi clicca sulla tab impostazioni ipv4 (mi pare... è un po' che non uso distro con il network manager)bix ha scritto: scusa l'ignoranza :-[
il network manager lo trovo in alto a sx giusto?
se è quello che ho allegato come immagine, dove trovo la scheda impostazioni ipv4?
grazie per la pazienza.
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
questa è la tab via cavo
però per poter entrare in "impostazioni ipv4" devo cliccare su "aggiungi", perchè "lfupdown (eth0)" non mi permette di fare niente.
però per poter entrare in "impostazioni ipv4" devo cliccare su "aggiungi", perchè "lfupdown (eth0)" non mi permette di fare niente.
Re: [wireless] configurare router wireless
bix ha scritto: questa è la tab via cavo
però per poter entrare in "impostazioni ipv4" devo cliccare su "aggiungi", perchè "lfupdown (eth0)" non mi permette di fare niente.
come ti dicevo, non ricordo.
prova a vedere se c'è qualche pulsante sblocca.
chiudi la finestra e riaprila con sudo nm-editor
poi, se non va, lo tagliamo fuori e agiamo direttamente su /etc/network/interfaces
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
fai così:
sudo gedit /etc/NetworkManager/nm-system-settings.conf
cambia l'eventuale
managed=false
con
managed=true
riavvia il computer (potresti anche riavviare la sola rete, ma non ricordo il nome esatto del servizio in ubuntu)
sudo gedit /etc/NetworkManager/nm-system-settings.conf
cambia l'eventuale
managed=false
con
managed=true
riavvia il computer (potresti anche riavviare la sola rete, ma non ricordo il nome esatto del servizio in ubuntu)
Ultima modifica di kimj il giovedì 25 febbraio 2010, 0:59, modificato 1 volta in totale.
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
non sono riuscito nemmeno con "NetworkManager editor",
però in /etc/NetworkManager ho trovato questo, non so se ti può servire, è il file "nm-system-settings.conf"
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
# the file:
#
# /etc/default/NetworkManager
#
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
invece il file /etc/network/interfaces è il seguente:
auto lo
iface lo inet loopback
auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider
auto eth0
iface eth0 inet manual
però in /etc/NetworkManager ho trovato questo, non so se ti può servire, è il file "nm-system-settings.conf"
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
# the file:
#
# /etc/default/NetworkManager
#
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
invece il file /etc/network/interfaces è il seguente:
auto lo
iface lo inet loopback
auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider
auto eth0
iface eth0 inet manual
Re: [wireless] configurare router wireless
bix ha scritto: non sono riuscito nemmeno con "NetworkManager editor",
però in /etc/NetworkManager ho trovato questo, non so se ti può servire, è il file "nm-system-settings.conf"
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
# the file:
#
# /etc/default/NetworkManager
#
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
invece il file /etc/network/interfaces è il seguente:
auto lo
iface lo inet loopback
auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider
auto eth0
iface eth0 inet manual
come ho scritto:
cambia l'eventualeCodice: Seleziona tutto
sudo gedit /etc/NetworkManager/nm-system-settings.conf
conCodice: Seleziona tutto
managed=false
Codice: Seleziona tutto
managed=true
poi salva e riavvia. e dimmi
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
aspetta però!
gli ultimi due file che ho postato, li ho copiati ora che funziona il collegamento (dopo aver digitato "sudo dhclient")
quindi forse per vedere il malfunzionamento dovrei darti quelli con connessione non eseguita...?
o no?
gli ultimi due file che ho postato, li ho copiati ora che funziona il collegamento (dopo aver digitato "sudo dhclient")
quindi forse per vedere il malfunzionamento dovrei darti quelli con connessione non eseguita...?
o no?
Re: [wireless] configurare router wireless
bix ha scritto: aspetta però!
gli ultimi due file che ho postato, li ho copiati ora che funziona il collegamento (dopo aver digitato "sudo dhclient")
quindi forse per vedere il malfunzionamento dovrei darti quelli con connessione non eseguita...?
o no?
non importa. non voglio vedere il malfunzionamento: l'ho già visto. è quel false. devi cambiarlo in true
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
FUNZIONA!
ho modificato in true , salvato, riavviato e FUNZIONA!
senza dare nessun comando.
grazie!
sei stato preziosissimo! (b2b)
se non è troppo lungo e complicato da spiegare, qual'era il problema?
mi piacerebbe saperne un po' di più sulla configurazione delle reti (che se non ho capito male è abbastanza indipendente dal SO che si usa) c'è qualche sito o testo che mi puoi consigliare?
grazie ancora!
ho modificato in true , salvato, riavviato e FUNZIONA!
senza dare nessun comando.
grazie!
sei stato preziosissimo! (b2b)
se non è troppo lungo e complicato da spiegare, qual'era il problema?
mi piacerebbe saperne un po' di più sulla configurazione delle reti (che se non ho capito male è abbastanza indipendente dal SO che si usa) c'è qualche sito o testo che mi puoi consigliare?
grazie ancora!
Re: [wireless] configurare router wireless
che in pratica, PER QUALCHE FO[...ehm...no, mi sospendono] procedura automatica il controllo della rete era affidato ad un file di configurazione, ovviemante non configurato invece che al network manager, che, sempre ovviamente, per prima cosa prova a usare il dhcp su eth0bix ha scritto: FUNZIONA!
ho modificato in true , salvato, riavviato e FUNZIONA!
senza dare nessun comando.
grazie!
sei stato preziosissimo! (b2b)
se non è troppo lungo e complicato da spiegare, qual'era il problema?
mi piacerebbe saperne un po' di più sulla configurazione delle reti (che se non ho capito male è abbastanza indipendente dal SO che si usa) c'è qualche sito o testo che mi puoi consigliare?
grazie ancora!
si sarebbe anche potuto escludere il network manager e fare a mano su quel file, ma poi, con il wireless, sarebbe diventato molto più complesso e poco pratico
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
infatti ora in alto a dx il nm mi indica l'icona del collegamento via cavo.
funziona tutto perfettamente!
grazie ancora!
(good)
funziona tutto perfettamente!
grazie ancora!
(good)
Re: [wireless] configurare router wireless
di niente. notte.bix ha scritto: infatti ora in alto a dx il nm mi indica l'icona del collegamento via cavo.
funziona tutto perfettamente!
grazie ancora!
(good)
We no longer think of chairs as technology; we just think of them as chairs. But there was a time when we hadn't worked out how many legs chairs should have, how tall they should be, and they would often 'crash' when we tried to use them.
Re: [wireless] configurare router wireless
Ciao, sono contento che sia riuscito a connetterti.
(cambia il titolo del post ed aggiungi "risolto"..............grazie)
ciaoooooo
(cambia il titolo del post ed aggiungi "risolto"..............grazie)
ciaoooooo
...It's a town full of loser and I'm pulling out of here "my" Win...
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 8 ospiti