[Risolto] ubuntu 11.10 termina la sessione da solo

[Baddy]

[img]http://[img]http://www.imagehost.it/dm/LILT/Schermata%20del%202012-03-22%2018:15:27.png[/img][/img]



Mi si è appena riavviato, sempre 2 volte, e la ventola continua ad andare! Cosa posso fare?

[Baddy]

[img width=800 height=449]http://www.imagehost.it/di/UHUF/Scherma ... :15:27.png[/img]

Mi si è appena riavviato, sempre 2 volte, e la ventola continua ad andare! Cosa posso fare?

[Diabolik62]

dai
dmesg
posta le parti relative ad errori

[Baddy]

Codice: Seleziona tutto

[  163.936192] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[  163.936201] wlan0: associated
[  167.322961] wlan0: deauthenticated from 00:04:ed:9d:dd:6e (Reason: 1)
[  167.452423] cfg80211: All devices are disconnected, going to restore regulatory settings
[  167.452438] cfg80211: Restoring regulatory settings
[  167.452448] cfg80211: Calling CRDA to update world regulatory domain
[  167.459047] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[  167.459058] cfg80211: World regulatory domain updated:
[  167.459065] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  167.459074] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.459083] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  167.459092] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  167.459100] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  167.459110] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  168.610970] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  168.615402] wlan0: authenticated
[  168.635180] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[  168.637703] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[  168.637712] wlan0: associated
[  180.850471] wlan0: no IPv6 routers present
[  240.363816] cfg80211: All devices are disconnected, going to restore regulatory settings
[  240.363828] cfg80211: Restoring regulatory settings
[  240.363836] cfg80211: Calling CRDA to update world regulatory domain
[  240.370741] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[  240.370750] cfg80211: World regulatory domain updated:
[  240.370755] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  240.370762] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  240.370768] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  240.370774] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  240.370779] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  240.370785] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  241.516298] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  241.716700] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[  241.916530] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[  242.116348] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[  248.201839] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  248.399217] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[  248.599069] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[  248.798877] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[  254.923389] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  255.121739] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  255.321543] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  255.521376] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  261.618496] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  261.816210] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  262.016059] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  262.215888] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  268.360841] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  268.559331] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  268.759293] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  268.959223] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  275.030703] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  275.229222] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  275.429154] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  275.629095] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  281.768630] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  281.967075] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  282.167005] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  282.366930] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  288.430493] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  288.628932] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  288.631727] wlan0: direct probe responded
[  288.696919] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  288.896895] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[  289.096783] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[  289.296723] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[  295.392388] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  295.590739] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  295.790651] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  295.990648] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  302.094921] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[  302.292586] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[  302.492524] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[  302.692477] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[  308.829062] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  309.026448] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  309.226376] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  309.426323] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[  315.534830] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[  315.732342] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 2/3)
[  315.932264] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 3/3)
[  316.132198] wlan0: direct probe to 00:04:ed:9d:dd:6e timed out
[ 4051.652236] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[ 4051.654752] wlan0: authenticated
[ 4051.673521] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[ 4051.677078] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=2)
[ 4051.677081] wlan0: associated
[ 4062.387099] wlan0: no IPv6 routers present
[ 9358.000820] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 9358.000833] cfg80211: Restoring regulatory settings
[ 9358.000864] cfg80211: Calling CRDA to update world regulatory domain
[ 9358.008073] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 9358.008082] cfg80211: World regulatory domain updated:
[ 9358.008087] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9358.008094] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9358.008101] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9358.008106] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9358.008112] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9358.008139] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9359.149249] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[ 9359.293247] wlan0: authenticated
[ 9359.312085] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[ 9359.511710] wlan0: associate with 00:04:ed:9d:dd:6e (try 2)
[ 9359.711692] wlan0: associate with 00:04:ed:9d:dd:6e (try 3)
[ 9359.911559] wlan0: association with 00:04:ed:9d:dd:6e timed out
[ 9420.265895] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[ 9420.281543] wlan0: authenticated
[ 9420.300450] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[ 9420.312949] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[ 9420.312958] wlan0: associated
[ 9431.092853] wlan0: no IPv6 routers present
[ 9573.831366] acpi_call: Module loaded successfully
[ 9598.503203] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[ 9598.999816] kbd_keycode: 33 callbacks suppressed
[ 9598.999826] keyboard: can't emulate rawmode for keycode 240
[ 9598.999844] keyboard: can't emulate rawmode for keycode 240
[ 9598.999856] asus_wmi: Unknown key 57 pressed
[ 9851.905262] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 9852.201700] keyboard: can't emulate rawmode for keycode 240
[ 9852.201721] keyboard: can't emulate rawmode for keycode 240
[ 9852.201733] asus_wmi: Unknown key 58 pressed
[11215.400049] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[11215.591378] keyboard: can't emulate rawmode for keycode 240
[11215.591385] keyboard: can't emulate rawmode for keycode 240
[11215.591389] asus_wmi: Unknown key 57 pressed
[11236.700781] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[11237.088890] keyboard: can't emulate rawmode for keycode 240
[11237.088910] keyboard: can't emulate rawmode for keycode 240
[11237.088919] asus_wmi: Unknown key 58 pressed
[11439.639182] cfg80211: All devices are disconnected, going to restore regulatory settings
[11439.639198] cfg80211: Restoring regulatory settings
[11439.639208] cfg80211: Calling CRDA to update world regulatory domain
[11439.646852] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[11439.646864] cfg80211: World regulatory domain updated:
[11439.646871] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11439.646880] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11439.646888] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11439.646897] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11439.646905] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11439.646913] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11440.784869] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[11440.983493] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[11441.183394] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[11441.383353] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[11447.446561] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[11447.449497] wlan0: authenticated
[11447.449652] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[11447.456342] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[11447.456351] wlan0: associated
[11535.616448] cfg80211: All devices are disconnected, going to restore regulatory settings
[11535.616453] cfg80211: Restoring regulatory settings
[11535.616456] cfg80211: Calling CRDA to update world regulatory domain
[11535.621213] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[11535.621216] cfg80211: World regulatory domain updated:
[11535.621218] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11535.621220] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11535.621221] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11535.621223] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11535.621224] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11535.621226] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11536.762560] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[11536.844827] wlan0: authenticated
[11536.863680] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[11536.868064] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[11536.868072] wlan0: associated
[11696.345755] cfg80211: All devices are disconnected, going to restore regulatory settings
[11696.345770] cfg80211: Restoring regulatory settings
[11696.345780] cfg80211: Calling CRDA to update world regulatory domain
[11696.352660] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[11696.352669] cfg80211: World regulatory domain updated:
[11696.352673] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11696.352681] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11696.352687] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11696.352692] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11696.352698] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11696.352703] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11697.456458] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[11697.459098] wlan0: authenticated
[11697.478063] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[11697.488838] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[11697.488847] wlan0: associated
[12073.477664] cfg80211: All devices are disconnected, going to restore regulatory settings
[12073.477678] cfg80211: Restoring regulatory settings
[12073.477688] cfg80211: Calling CRDA to update world regulatory domain
[12073.485030] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[12073.485039] cfg80211: World regulatory domain updated:
[12073.485044] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12073.485051] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12073.485057] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12073.485063] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12073.485068] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12073.485074] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12104.754482] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[12104.778706] wlan0: authenticated
[12104.797498] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[12104.857470] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[12104.857481] wlan0: associated
[12116.860266] wlan0: no IPv6 routers present
[12720.726825] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[12721.131034] keyboard: can't emulate rawmode for keycode 240
[12721.131053] keyboard: can't emulate rawmode for keycode 240
[12721.131060] asus_wmi: Unknown key 57 pressed
[12808.757628] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[12808.955264] keyboard: can't emulate rawmode for keycode 240
[12808.955285] keyboard: can't emulate rawmode for keycode 240
[12808.955292] asus_wmi: Unknown key 58 pressed
[12993.611018] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[12994.008371] keyboard: can't emulate rawmode for keycode 240
[12994.008392] keyboard: can't emulate rawmode for keycode 240
[12994.008402] asus_wmi: Unknown key 57 pressed
[13001.829301] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[13002.201737] keyboard: can't emulate rawmode for keycode 240
[13002.201759] keyboard: can't emulate rawmode for keycode 240
[13002.201769] asus_wmi: Unknown key 58 pressed
[13096.215075] cfg80211: All devices are disconnected, going to restore regulatory settings
[13096.215088] cfg80211: Restoring regulatory settings
[13096.215096] cfg80211: Calling CRDA to update world regulatory domain
[13096.222277] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[13096.222287] cfg80211: World regulatory domain updated:
[13096.222292] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13096.222299] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13096.222305] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13096.222311] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13096.222317] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13096.222323] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13121.473439] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[13121.671300] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 2)
[13121.871227] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 3)
[13122.071194] wlan0: authentication with 00:04:ed:9d:dd:6e timed out
[13128.146523] wlan0: direct probe to 00:04:ed:9d:dd:6e (try 1/3)
[13128.150328] wlan0: direct probe responded
[13128.201212] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[13128.223345] wlan0: authenticated
[13128.242153] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[13128.261279] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[13128.261288] wlan0: associated
[13141.032933] wlan0: no IPv6 routers present
[13305.698992] cfg80211: All devices are disconnected, going to restore regulatory settings
[13305.699005] cfg80211: Restoring regulatory settings
[13305.699015] cfg80211: Calling CRDA to update world regulatory domain
[13305.705863] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[13305.705873] cfg80211: World regulatory domain updated:
[13305.705877] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13305.705884] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13305.705890] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13305.705896] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13305.705902] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13305.705907] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13306.760677] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[13306.763030] wlan0: authenticated
[13306.784782] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[13306.828066] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[13306.828077] wlan0: associated
[13696.330595] cfg80211: All devices are disconnected, going to restore regulatory settings
[13696.330609] cfg80211: Restoring regulatory settings
[13696.330619] cfg80211: Calling CRDA to update world regulatory domain
[13696.337614] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[13696.337623] cfg80211: World regulatory domain updated:
[13696.337628] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13696.337635] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13696.337641] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13696.337646] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13696.337652] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13696.337658] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13733.604738] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[13733.623034] wlan0: authenticated
[13733.642242] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[13733.839084] wlan0: associate with 00:04:ed:9d:dd:6e (try 2)
[13733.842720] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[13733.842728] wlan0: associated
[13745.115469] wlan0: no IPv6 routers present
[14407.811620] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[14408.192811] keyboard: can't emulate rawmode for keycode 240
[14408.192834] keyboard: can't emulate rawmode for keycode 240
[14408.192843] asus_wmi: Unknown key 57 pressed
[14493.376502] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[14493.494112] keyboard: can't emulate rawmode for keycode 240
[14493.494137] keyboard: can't emulate rawmode for keycode 240
[14493.494147] asus_wmi: Unknown key 58 pressed
[15176.208635] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[15177.019803] keyboard: can't emulate rawmode for keycode 240
[15177.019822] keyboard: can't emulate rawmode for keycode 240
[15177.019832] asus_wmi: Unknown key 57 pressed
[15265.919759] keyboard: can't emulate rawmode for keycode 240
[15265.919766] keyboard: can't emulate rawmode for keycode 240
[15265.919768] asus_wmi: Unknown key 58 pressed
[15265.944181] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[15458.240062] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[15458.666386] keyboard: can't emulate rawmode for keycode 240
[15458.666408] keyboard: can't emulate rawmode for keycode 240
[15458.666417] asus_wmi: Unknown key 57 pressed
[15470.473853] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[15470.890685] keyboard: can't emulate rawmode for keycode 240
[15470.890705] keyboard: can't emulate rawmode for keycode 240
[15470.890715] asus_wmi: Unknown key 58 pressed
[17078.438679] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[17078.858526] keyboard: can't emulate rawmode for keycode 240
[17078.858547] keyboard: can't emulate rawmode for keycode 240
[17078.858558] asus_wmi: Unknown key 57 pressed
[17092.211795] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[17092.630121] keyboard: can't emulate rawmode for keycode 240
[17092.630144] keyboard: can't emulate rawmode for keycode 240
[17092.630154] asus_wmi: Unknown key 58 pressed
[glow=red,2,300][17195.071390] acpi_call: Calling \_SB.PCI0.P0P1.VGA._OFF
[17195.071415] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.073961] acpi_call: Calling \_SB.PCI0.P0P2.VGA._OFF
[17195.073980] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.076281] acpi_call: Calling \_SB_.PCI0.OVGA.ATPX
[17195.076299] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.078626] acpi_call: Calling \_SB_.PCI0.OVGA.XTPX
[17195.078643] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.080974] acpi_call: Calling \_SB.PCI0.P0P3.PEGP._OFF
[17195.080997] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.083593] acpi_call: Calling \_SB.PCI0.P0P2.PEGP._OFF
[17195.083610] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.086199] acpi_call: Calling \_SB.PCI0.P0P1.PEGP._OFF
[17195.086215] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.088714] acpi_call: Calling \_SB.PCI0.MXR0.MXM0._OFF
[17195.088731] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.091340] acpi_call: Calling \_SB.PCI0.PEG1.GFX0._OFF
[17195.091356] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.093954] acpi_call: Calling \_SB.PCI0.PEG0.GFX0.DOFF
[17195.093972] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.096479] acpi_call: Calling \_SB.PCI0.PEG1.GFX0.DOFF
[17195.096495] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.099040] acpi_call: Calling \_SB.PCI0.PEG0.PEGP._OFF
[17195.099057] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.101597] acpi_call: Calling \_SB.PCI0.XVR0.Z01I.DGOF
[17195.101611] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17195.104111] acpi_call: Calling \_SB.PCI0.PEGR.GFX0._OFF
[17195.189164] acpi_call: Call successful: 0x0
[17249.039696] acpi_call: Calling \_SB.PCI0.P0P1.VGA._OFF
[17249.039717] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.042546] acpi_call: Calling \_SB.PCI0.P0P2.VGA._OFF
[17249.042563] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.045309] acpi_call: Calling \_SB_.PCI0.OVGA.ATPX
[17249.045326] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.048061] acpi_call: Calling \_SB_.PCI0.OVGA.XTPX
[17249.048083] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.050764] acpi_call: Calling \_SB.PCI0.P0P3.PEGP._OFF
[17249.050784] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.053436] acpi_call: Calling \_SB.PCI0.P0P2.PEGP._OFF
[17249.053453] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.056465] acpi_call: Calling \_SB.PCI0.P0P1.PEGP._OFF
[17249.056485] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.059433] acpi_call: Calling \_SB.PCI0.MXR0.MXM0._OFF
[17249.059452] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.062113] acpi_call: Calling \_SB.PCI0.PEG1.GFX0._OFF
[17249.062129] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.064790] acpi_call: Calling \_SB.PCI0.PEG0.GFX0.DOFF
[17249.064807] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.067409] acpi_call: Calling \_SB.PCI0.PEG1.GFX0.DOFF
[17249.067425] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.070192] acpi_call: Calling \_SB.PCI0.PEG0.PEGP._OFF
[17249.070209] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.072879] acpi_call: Calling \_SB.PCI0.XVR0.Z01I.DGOF
[17249.072897] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17249.075499] acpi_call: Calling \_SB.PCI0.PEGR.GFX0._OFF
[17249.075582] acpi_call: Call successful: 0x0
[17311.722327] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=600
[17312.359952] keyboard: can't emulate rawmode for keycode 240
[17312.360010] keyboard: can't emulate rawmode for keycode 240
[17312.360020] asus_wmi: Unknown key 57 pressed
[17342.675320] acpi_call: Calling \_SB.PCI0.P0P1.VGA._OFF
[17342.675327] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.676685] acpi_call: Calling \_SB.PCI0.P0P2.VGA._OFF
[17342.676702] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.678589] acpi_call: Calling \_SB_.PCI0.OVGA.ATPX
[17342.678593] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.679902] acpi_call: Calling \_SB_.PCI0.OVGA.XTPX
[17342.679917] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.681791] acpi_call: Calling \_SB.PCI0.P0P3.PEGP._OFF
[17342.681795] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.683431] acpi_call: Calling \_SB.PCI0.P0P2.PEGP._OFF
[17342.683446] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.685515] acpi_call: Calling \_SB.PCI0.P0P1.PEGP._OFF
[17342.685523] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.687272] acpi_call: Calling \_SB.PCI0.MXR0.MXM0._OFF
[17342.687287] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.689308] acpi_call: Calling \_SB.PCI0.PEG1.GFX0._OFF
[17342.689315] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.691053] acpi_call: Calling \_SB.PCI0.PEG0.GFX0.DOFF
[17342.691068] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.693057] acpi_call: Calling \_SB.PCI0.PEG1.GFX0.DOFF
[17342.693064] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.695159] acpi_call: Calling \_SB.PCI0.PEG0.PEGP._OFF
[17342.695174] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[17342.697435] acpi_call: Calling \_SB.PCI0.XVR0.Z01I.DGOF
[17342.697450] acpi_call: Cannot get handle: Error: AE_NOT_FOUND[/glow]
[17342.699774] acpi_call: Calling \_SB.PCI0.PEGR.GFX0._OFF
[17342.699853] acpi_call: Call successful: 0x0
[17373.590402] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[17373.796548] keyboard: can't emulate rawmode for keycode 240
[17373.796565] keyboard: can't emulate rawmode for keycode 240
[17373.796572] asus_wmi: Unknown key 58 pressed
[17574.503858] cfg80211: All devices are disconnected, going to restore regulatory settings
[17574.503869] cfg80211: Restoring regulatory settings
[17574.503899] cfg80211: Calling CRDA to update world regulatory domain
[17574.511194] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[17574.511203] cfg80211: World regulatory domain updated:
[17574.511207] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[17574.511214] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17574.511220] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[17574.511226] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[17574.511232] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17574.511238] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17575.601220] wlan0: authenticate with 00:04:ed:9d:dd:6e (try 1)
[17575.603166] wlan0: authenticated
[17575.621810] wlan0: associate with 00:04:ed:9d:dd:6e (try 1)
[17575.625364] wlan0: RX ReassocResp from 00:04:ed:9d:dd:6e (capab=0x411 status=0 aid=1)
[17575.625373] wlan0: associated
carlo@BaddyAsus:~$ 

[Diabolik62]

vai sul messaggio sopra, su modifica e
posta gli output all' interno dei tag 'code'

[Baddy]

Fatto.

La temperatura + alta tra tutti i sensori è a 47° ma la ventola continua imperterrita!

[Diabolik62]

io rimuoverei quello script hai provato con bumblee

[Baddy]

Non lo conosco, non ce l'ho e USC non lo trova! Altro?

[cristian_c]

Non lo conosco, non ce l'ho e USC non lo trova! Altro?

Hardware/Video/GraficaIbrida/Bumblebee
Scusate, ma qui stiamo parlando di tecnologia Optimus? ???

[Diabolik62]

Non lo conosco, non ce l'ho e USC non lo trova! Altro?

Hardware/Video/GraficaIbrida/Bumblebee
Scusate, ma qui stiamo parlando di tecnologia Optimus? ???

(yes) (yes)
perchè non l'avevi capito!!

Codice: Seleziona tutto

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:1050] (rev a1) (prog-if 00 [VGA controller])

[Baddy]

Nel frattempo ho riavviato e la ventola s'è fermata!

Ora, cosa dovrei fare? Calcolato che tra poco devo uscire (ho allenamento di volley!)..

Seguire la guida per arrivare dove?? Intanto provo..

[Baddy]

Sono fermo al paragrafo "Utilizzo" che non comprendo e nel paragrafo "Script diconfigurazione" i link segnalati per gli elenchi dei portatili e dell'hardware non sembrano sia più quelli giusti!!

[cristian_c]

Sono fermo al paragrafo "Utilizzo" che non comprendo e nel paragrafo "Script diconfigurazione" i link segnalati per gli elenchi dei portatili e dell'hardware non sembrano sia più quelli giusti!!

quale punto non riesci a capire? ???

[Baddy]

La scheda video Intel è in esecuzione sul desktop e la scheda Nvidia può essere usata per applicazioni che richiedono maggiore potenza grafica, utilizzando i seguenti comandi:

Codice: Seleziona tutto

optirun32 nome_applicazione 

per le versioni 32 bit e:

Codice: Seleziona tutto

optirun64 nome_applicazione

per le versioni 64 bit, sostituendo «nome_applicazione» con il nome dell'applicazione che si desidera avviare.

- Con quale nome dovrei sostituire?
- E' una cosa devo fare ogni volta per avviare e diabilitare le 2 schede, o poi va in automatico?

Ad esempio è possibile vedere la differenza di frame al secondo misurati digitando i comandi:

Codice: Seleziona tutto

glxspheres 

che utilizza la scheda Intel e:

Codice: Seleziona tutto

optirun32 glxspheres

che utilizza la scheda Nvidia.

- Il primo funziona: mi fa vedere una serie di sfere colorate in movimento ecc ecc.; il secondo non è un comando valido!

Per quanto riguarda il resto della guida da

Script di configurazione

a

Hardware supportato

i link degli elenchi dei portatili e dell'hardware portano a pagine sbagliate:

questa pagina

-> https://github.com/MrMEEE/bumblebee/tree/master/install-files/ubuntu

pagina del progetto

-> https://github.com/MrMEEE/bumblebee

Mentre

dedicata ad Ubuntu

porta a https://github.com/Bumblebee-Project/Bumblebee da cui non riesco a capire come trovare gli script per i vari modelli di computer.

[Diabolik62]

optirun32 vlc
se non funge togli il 32 o il 64

[Baddy]

Il tuo comando lancia VLC. Poi ho provato senza 32 o 64 (il mio è un Asus quasi nuovo a 64bit) col comando che non funzionava e ora va, come l'altro sopra!

Codice: Seleziona tutto

carlo@BaddyAsus:~$ optirun glxspheres
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: GeForce GT 520M/PCI/SSE2
82.078483 frames/sec - 91.599587 Mpixels/sec
83.432527 frames/sec - 93.110700 Mpixels/sec
86.133835 frames/sec - 96.125359 Mpixels/sec
86.050065 frames/sec - 96.031873 Mpixels/sec
89.172081 frames/sec - 99.516043 Mpixels/sec
84.336547 frames/sec - 94.119586 Mpixels/sec
85.662633 frames/sec - 95.599499 Mpixels/sec
86.410073 frames/sec - 96.433642 Mpixels/sec
carlo@BaddyAsus:~$ 

Per il resto c'è modo di risolvere gli impicci della guida?

Per risolvere il mio problema in generale? Cioè, questo riavvio random e spesso doppio, è causato dal fatto che vanno in crash le due presunte schede video (il chip Intel della scheda madre e la scheda video vera e propria della Nvidia)? Pensate che la prossima release potrebbe risolvere questo tipo di problema? Perchè se sì, smetto di rompervi le scatole, mi metto il cuore in pace e attendo un paio di settimane. Ci guadagnamo tutti in salute mi sa! Anche se odio non risolvere un problema.  :-\

[Baddy]

Questo è l'altro comando:

Codice: Seleziona tutto

carlo@BaddyAsus:~$ glxspheres 
Polygons in scene: 62464
Visual ID of window: 0x94
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile 
58.601395 frames/sec - 65.399157 Mpixels/sec
59.845624 frames/sec - 66.787716 Mpixels/sec
59.769149 frames/sec - 66.702370 Mpixels/sec
59.950209 frames/sec - 66.904434 Mpixels/sec
59.865512 frames/sec - 66.809912 Mpixels/sec
carlo@BaddyAsus:~$ 

[cristian_c]

@Baddy,
dovresti segnalare nella board del Gruppo Documentazione la presenza dei link a pagine inesistenti (yes)

[Baddy]

      Fatto!

Intendo la segnalazione! 

Per il mio problema..... ....si riavvia ancora anche se meno fequentemente e spesso senza il doppio riavvio..........ma persevera :'(  !!!

[Baddy]

Ovviamente ragazzi:


GRAZIE MILLE VERAMENTE!!!

per l'impegno e il sostegno che mi state dimostrando.    (b2b)