[Sviluppo] Driver per periferiche DVB-T USB basate su AF9035 - proposto per kernel 3.5

[Janvitus]

Io ho questa: http://forum.ubuntu-it.org/viewtopic.ph ... a#p4477051

Funziona perfettamente ma per mancanza di tempo non sono ancora riuscito a configurare il telecomando...

[Chgil]

xgaz ho eseguito prvoe con ubuntu 13.04 3.8.0-34 pulito installando media_build, e non cambia assolutamente stesso dmesg precedente non crea dev/dvb
non funziona.

Ora provvero a installare kernel 3.12.2 per verificare quello già fatto

Ma non ne tolgo ragno dal buco!!!!

Mi sa che non funziona Bah!!!

Altre idee sono ben accette.
Grazie ancora

Ubuntu 13.04 kernel 3.12.2 non funziona af9035 e tbs 6981 neanche
ubuntu 13.04 kernel 3.12.4 031204 non funziona neanche

Mi sa che sono un disastro e forse sbaglio qualcosa ma no si accende neanche led blu su chiavetta usb DTT

[Xgaz]

Fatta altra prova
con Kernel 3.12.2 tutto ok

Codice: Seleziona tutto

[  286.871760] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[  287.051812] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[  287.178212] usb 1-1.3: New USB device found, idVendor=07ca, idProduct=a867XXXXXXXXXXXX
[  287.185573] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  287.193294] usb 1-1.3: Product: A867
[  287.196933] usb 1-1.3: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[  287.203482] usb 1-1.3: SerialNumber: XXXXXXXXXXXXX
[  287.262212] usb 1-1.3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[  287.275468] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in cold state
[  287.290400] usb 1-1.3: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[  287.612268] usb 1-1.3: dvb_usb_af9035: firmware version=12.13.15.0
[  287.618486] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[  287.634209] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[  287.645361] DVB: registering new adapter (AVerMedia HD Volar (A867))
[  287.711484] i2c i2c-2: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
[  287.723924] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[  288.122963] mxl5007t 2-0060: creating new instance
[  288.128600] mxl5007t_get_chip_id: unknown rev (3f)
[  288.134486] mxl5007t_get_chip_id: MxL5007T detected @ 2-0060
[  288.153452] Registered IR keymap rc-empty
[  288.161093] input: AVerMedia HD Volar (A867) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/rc/rc0/input8
[  288.173425] rc0: AVerMedia HD Volar (A867) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/rc/rc0
[  288.184117] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 500 msecs
[  288.191422] usb 1-1.3: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[  288.210901] usbcore: registered new interface driver dvb_usb_af9035

Ciao Unixer!
Hai ragione...non sono più molto presente; ma, anche se non smanetto più come prima, qualche prova l'ho fatta....

Ho messo il kernel 3.12.5 su Ubuntu 12.04 per vedere com' era la faccenda...effettivamente, qualche problema c'è!!

A835:

Codice: Seleziona tutto

[  119.270905] usb 1-1.3: new high-speed USB device number 6 using ehci-pci
[  119.368976] usb 1-1.3: New USB device found, idVendor=07ca, idProduct=a835
[  119.368983] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  119.368988] usb 1-1.3: Product: A835
[  119.368991] usb 1-1.3: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[  119.368995] usb 1-1.3: SerialNumber: xxxxxxxxxxxxx
[  119.461473] usb 1-1.3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[  119.461841] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in cold state
[  119.482415] usb 1-1.3: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[  119.796194] usb 1-1.3: dvb_usb_af9035: firmware version=12.13.15.0
[  119.796205] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in warm state
[  119.798778] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[  119.798815] DVB: registering new adapter (AVerMedia AVerTV Volar HD/PRO (A835))
[  119.857123] i2c i2c-8: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
[  119.857133] usb 1-1.3: dvb_usb_af9035: too much data wlen=64 rlen=0
[  119.857140] i2c i2c-8: af9033: i2c wr failed=-22 reg=80004c len=1
[  119.857591] usbcore: registered new interface driver dvb_usb_af9035

A867:

Codice: Seleziona tutto

[  264.948227] usb 1-1.3: new high-speed USB device number 7 using ehci-pci
[  265.046628] usb 1-1.3: New USB device found, idVendor=07ca, idProduct=a867
[  265.046634] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  265.046637] usb 1-1.3: Product: A867
[  265.046641] usb 1-1.3: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[  265.046644] usb 1-1.3: SerialNumber: xxxxxxxxxxxxxx
[  265.049758] usb 1-1.3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[  265.050208] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in cold state
[  265.050278] usb 1-1.3: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[  265.377055] usb 1-1.3: dvb_usb_af9035: firmware version=12.13.15.0
[  265.377073] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[  265.379599] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[  265.379634] DVB: registering new adapter (AVerMedia HD Volar (A867))
[  265.381289] i2c i2c-8: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
[  265.381297] usb 1-1.3: dvb_usb_af9035: too much data wlen=64 rlen=0
[  265.381303] i2c i2c-8: af9033: i2c wr failed=-22 reg=80004c len=1

Probabilmente il "punto di rottura" è il kernel 3.12.2, visto che a te va; e va anche il precedente 3.8 (presumo) di Janvitus...
Come segnalato da Palosaari c'è stato un problema con gli ultimi commit del suo driver e, visto il numero di revisioni del kernel 3.12 in pochi giorni, il problema si è trascinato fino all'ultimo kernel stabile!


Infatti compilando gli ultimissimi media_build il problema sparisce:

A835:

Codice: Seleziona tutto

[   55.027125] usb 1-1.3: new high-speed USB device number 9 using ehci-pci
[   55.125589] usb 1-1.3: New USB device found, idVendor=07ca, idProduct=a835
[   55.125597] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   55.125601] usb 1-1.3: Product: A835
[   55.125605] usb 1-1.3: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[   55.125609] usb 1-1.3: SerialNumber: xxxxxxxxxxx
[   55.182702] WARNING: You are using an experimental version of the media stack.
[   55.182702] 	As the driver is backported to an older kernel, it doesn't offer
[   55.182702] 	enough quality for its usage in production.
[   55.182702] 	Use it with care.
[   55.182702] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   55.182702] 	675722b0e3917c6c917f1aa5f6d005cd3a0479f5 Merge branch 'upstream-fixes' into patchwork
[   55.182702] 	989af88339db26345e23271dae1089d949c4a0f1 [media] v4l: vsp1: Add LUT support
[   55.182702] 	a626e64e0bee4fb26848dbed92223dde488f3d93 [media] v4l: vsp1: Add SRU support
[   55.212124] usb 1-1.3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   55.212496] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in cold state
[   55.226712] usb 1-1.3: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[   55.536118] usb 1-1.3: dvb_usb_af9035: firmware version=12.13.15.0
[   55.536132] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in warm state
[   55.538655] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   55.538689] DVB: registering new adapter (AVerMedia AVerTV Volar HD/PRO (A835))
[   55.610058] i2c i2c-8: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
[   55.613933] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   55.632845] i2c i2c-8: tda18218: NXP TDA18218HN successfully identified
[   55.648718] Registered IR keymap rc-empty
[   55.648843] input: AVerMedia AVerTV Volar HD/PRO (A835) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input15
[   55.648960] rc0: AVerMedia AVerTV Volar HD/PRO (A835) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0
[   55.648967] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 500 msecs
[   55.648971] usb 1-1.3: dvb_usb_v2: 'AVerMedia AVerTV Volar HD/PRO (A835)' successfully initialized and connected
[   55.648998] usbcore: registered new interface driver dvb_usb_af9035

A867:

Codice: Seleziona tutto

[  235.045844] usb 1-1.3: new high-speed USB device number 47 using ehci-pci
[  235.143404] usb 1-1.3: New USB device found, idVendor=07ca, idProduct=a867
[  235.143409] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  235.143413] usb 1-1.3: Product: A867
[  235.143416] usb 1-1.3: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[  235.143419] usb 1-1.3: SerialNumber: xxxxxxxxxxxx
[  235.146488] usb 1-1.3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[  235.147006] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in cold state
[  235.147077] usb 1-1.3: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
[  235.466457] usb 1-1.3: dvb_usb_af9035: firmware version=12.13.15.0
[  235.466475] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[  235.468969] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[  235.469011] DVB: registering new adapter (AVerMedia HD Volar (A867))
[  235.470570] i2c i2c-8: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0
[  235.474703] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[  235.815825] mxl5007t 8-0060: creating new instance
[  235.816549] mxl5007t_get_chip_id: unknown rev (3f)
[  235.816553] mxl5007t_get_chip_id: MxL5007T detected @ 8-0060
[  235.832330] Registered IR keymap rc-empty
[  235.832445] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc2/input17
[  235.832571] rc2: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc2
[  235.832581] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 500 msecs
[  235.832588] usb 1-1.3: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected

Solo che a me sulla A867 (modello "DP7") appena tento di sintonizzare un canale, tornano i vecchi problemi:

Codice: Seleziona tutto

[  781.036469] mxl5007t_soft_reset: 522: failed!
[  781.036477] mxl5007t_tuner_init: error -121 on line 535
[  781.036480] mxl5007t_set_params: error -121 on line 666

[  889.925029] usb 1-1.3: dvb_usb_v2: usb_bulk_msg() failed=-19
[  889.925036] mxl5007t_write_reg: 473: failed!
[  889.925038] mxl5007t_sleep: error -121 on line 714

Quindi presumo serva ancora la patch...Unix, confermi!??

@Chgil : devi installare i media_build. Se l'hai già fatto, e non hai avuto problemi, puoi elencare le operazioni che hai fatto? Così proviamo a cercare di capire cosa non va...
Eventualmente, se puoi, togli per provare la scheda satellitare...

@Janvitus: puoi postare versione di Ubuntu e kernel sul quale ti funziona la pennetta?

Grazie a tutti e scusate se ci metto molto a rispondere, ma purtroppo mi sto occupando di un sacco di altre cose e non riesco più ad essere presente come una volta!

[Chgil]

Allora adesso con ubuntu 13.04 kernel 3.8.0-34

Con tbs 6981 e af 9035 solo installando driver per af9035 quest ultimo funziona, ma andando ad installare media_build come da linux wiki quindi prima le varie librerie e patch e patchutilitis! non funziona più niente.
Non si riesce a fare andare entrambi le schede, ho bisogno di avere sia sat che dtt, se qualcuno lo ha già fatto vorrei sapere con che schede e con quali driver

Media_build dovrebbe supportare entrambi
Ma a me non funziona

[Xgaz]

...installare media_build come da linux wiki quindi prima le varie librerie e patch e patchutilitis! ...

Scusa ma non ho capito a cosa hai fatto...librerie, patch...non devi far niente di tutto ciò...basta che segui questi comandi e fa tutto da solo!!

Codice: Seleziona tutto

git clone git://linuxtv.org/media_build.git
cd media_build
./build
sudo make install 

se non hai git intallato:

Codice: Seleziona tutto

sudo apt-get install git-core

[Chgil]

Installato così

sudo apt-get install git-core
sudo apt-get install libproc-processtable-perl

git clone git://linuxtv.org/media_build.git
cd media_build
./build
sudo make install

Riconosce af9035 ma non tbs 6981

Se poi provo a installare tbs6981 con questa procedura

mkdir driver
cd driver
wget http://www.tbsdtv.com/download/document ... tbs-linux- drivers_v130927.zip
unzip tbs-linux-drivers_v130927.zip
tar xjvf linux-tbs-drivers.tar.bz2
find -type d -exec chmod 755 {} \;
chmod 755 linux-tbs-drivers/v4l/scripts/*
find linux-tbs-drivers -name “*.sh” -exec chmod 755 {} \;
cd linux-tbs-drivers

sudo make distclean
sudo ./v4l/tbs-x86_64.sh

cd /lib/modules/$(uname -r)/kernel/drivers
sudo mv media /home/yourusername/media.bak

cd /driver/linux-tbs-drivers

make
sudo make install
sudo shutdown -r now

Riconosce TBS 6981 e non af9035

I media_build da dovrebbero riconoscere entrambi aggiuncendo i FW:

Aggiundere firmware CX24117
https://github.com/ljalves/linux_media/ ... 7-firmware
dvb-fe-cx24117.fw

wget http://www.tbsdtv.com/download/document ... 130901.zip
unzip -p tbs-linux-drivers_v130901.zip linux-tbs-drivers.tar.bz2 | tar jxOf - linux-tbs-drivers/v4l/tbs6981fe_driver.o.x86_64 | dd bs=1 skip=10144 count=55486 of=dvb-fe-cx24117.fw
sudo cp '/home/"mettere nome utente"/dvb-fe-cx24117.fw' '/lib/firmware

cd /lib/firmware
sudo wget http://xgazza.altervista.org/Linux/DVB/ ... 9035-02.fw


Grazie ancora e scusami della mia incapacità

[Chgil]

Dmesg dopo aver installato media_build e firmware af 9035.

Codice: Seleziona tutto

   12.962640] videodev: disagrees about version of symbol media_entity_put
[   12.962645] videodev: Unknown symbol media_entity_put (err -22)
[   12.962681] videodev: Unknown symbol media_entity_remove_links (err 0)
[   12.962699] videodev: disagrees about version of symbol media_device_register_entity
[   12.962701] videodev: Unknown symbol media_device_register_entity (err -22)
[   12.962744] videodev: disagrees about version of symbol media_entity_get
[   12.962745] videodev: Unknown symbol media_entity_get (err -22)
[   12.962750] videodev: disagrees about version of symbol media_device_unregister_entity
[   12.962751] videodev: Unknown symbol media_device_unregister_entity (err -22)
[   13.047234] WARNING: You are using an experimental version of the media stack.
[   13.047234] 	As the driver is backported to an older kernel, it doesn't offer
[   13.047234] 	enough quality for its usage in production.
[   13.047234] 	Use it with care.
[   13.047234] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   13.047234] 	675722b0e3917c6c917f1aa5f6d005cd3a0479f5 Merge branch 'upstream-fixes' into patchwork
[   13.047234] 	989af88339db26345e23271dae1089d949c4a0f1 [media] v4l: vsp1: Add LUT support
[   13.047234] 	a626e64e0bee4fb26848dbed92223dde488f3d93 [media] v4l: vsp1: Add SRU support
[   13.050981] WARNING: You are using an experimental version of the media stack.
[   13.050981] 	As the driver is backported to an older kernel, it doesn't offer
[   13.050981] 	enough quality for its usage in production.
[   13.050981] 	Use it with care.
[   13.050981] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   13.050981] 	675722b0e3917c6c917f1aa5f6d005cd3a0479f5 Merge branch 'upstream-fixes' into patchwork
[   13.050981] 	989af88339db26345e23271dae1089d949c4a0f1 [media] v4l: vsp1: Add LUT support
[   13.050981] 	a626e64e0bee4fb26848dbed92223dde488f3d93 [media] v4l: vsp1: Add SRU support
[   13.067479] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   13.067601] radeon 0000:01:00.0: WB enabled
[   13.067605] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880212769c00
[   13.067608] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880212769c0c
[   13.067611] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.067612] [drm] Driver supports precise vblank timestamp query.
[   13.067649] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[   13.067662] radeon 0000:01:00.0: radeon: using MSI.
[   13.067687] [drm] radeon: irq initialized.
[   13.084203] [drm] ring test on 0 succeeded in 0 usecs
[   13.084261] [drm] ring test on 3 succeeded in 1 usecs
[   13.084675] [drm] ib test on ring 0 succeeded in 0 usecs
[   13.084694] [drm] ib test on ring 3 succeeded in 0 usecs
[   13.085387] [drm] Radeon Display Connectors
[   13.085390] [drm] Connector 0:
[   13.085391] [drm]   HDMI-A-1
[   13.085393] [drm]   HPD4
[   13.085395] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   13.085396] [drm]   Encoders:
[   13.085397] [drm]     DFP1: INTERNAL_UNIPHY1
[   13.085398] [drm] Connector 1:
[   13.085400] [drm]   DVI-I-1
[   13.085401] [drm]   HPD1
[   13.085403] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   13.085404] [drm]   Encoders:
[   13.085405] [drm]     DFP2: INTERNAL_UNIPHY
[   13.085406] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   13.085407] [drm] Connector 2:
[   13.085409] [drm]   VGA-1
[   13.085410] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   13.085411] [drm]   Encoders:
[   13.085412] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   13.085474] [drm] Internal thermal controller without fan control
[   13.085533] [drm] radeon: power management initialized
[   13.105003] usb 2-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   13.105375] usb 2-1: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   13.107315] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   13.107357] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   13.120790] [drm] fb mappable at 0xD0142000
[   13.120793] [drm] vram apper at 0xD0000000
[   13.120794] [drm] size 5324800
[   13.120796] [drm] fb depth is 24
[   13.120797] [drm]    pitch is 5888
[   13.120901] fbcon: radeondrmfb (fb0) is primary device
[   13.182384] i2c i2c-8: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   13.186261] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   13.336238] Console: switching to colour frame buffer device 180x56
[   13.339301] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   13.339303] radeon 0000:01:00.0: registered panic notifier
[   13.339311] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[   13.339374] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   13.339448] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   13.349867] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   13.614770] mxl5007t 8-0060: creating new instance
[   13.615523] mxl5007t_get_chip_id: unknown rev (3f)
[   13.615526] mxl5007t_get_chip_id: MxL5007T detected @ 8-0060
[   13.627147] Registered IR keymap rc-empty
[   13.627238] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc0/input12
[   13.628618] rc0: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc0
[   13.628625] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   13.628628] usb 2-1: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   13.630752] usb 2-2: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   13.631143] usb 2-2: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   13.633211] usb 2-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   13.633261] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   13.635647] i2c i2c-9: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   13.639524] usb 2-2: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[   13.982289] mxl5007t 9-0060: creating new instance
[   13.983031] mxl5007t_get_chip_id: unknown rev (3f)
[   13.983034] mxl5007t_get_chip_id: MxL5007T detected @ 9-0060
[   13.994911] Registered IR keymap rc-empty
[   13.995037] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1/input13
[   13.995101] rc1: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1
[   13.995108] usb 2-2: dvb_usb_v2: schedule remote query interval to 500 msecs
[   13.995112] usb 2-2: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   13.997035] usb 2-3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   13.997406] usb 2-3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   13.999729] usb 2-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   13.999777] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   14.002413] i2c i2c-10: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   14.006287] usb 2-3: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
[   14.350303] mxl5007t 10-0060: creating new instance
[   14.351042] mxl5007t_get_chip_id: unknown rev (3f)
[   14.351045] mxl5007t_get_chip_id: MxL5007T detected @ 10-0060
[   14.362672] Registered IR keymap rc-empty
[   14.362782] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc2/input14
[   14.363016] rc2: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc2
[   14.363023] usb 2-3: dvb_usb_v2: schedule remote query interval to 500 msecs
[   14.363027] usb 2-3: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   14.365169] usb 2-4: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   14.365541] usb 2-4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   14.367609] usb 2-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   14.367647] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   14.369780] i2c i2c-11: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   14.373676] usb 2-4: DVB: registering adapter 3 frontend 0 (Afatech AF9033 (DVB-T))...
[   14.714312] mxl5007t 11-0060: creating new instance
[   14.715054] mxl5007t_get_chip_id: unknown rev (3f)
[   14.715057] mxl5007t_get_chip_id: MxL5007T detected @ 11-0060
[   14.726559] Registered IR keymap rc-empty
[   14.726678] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/rc/rc3/input15
[   14.726728] rc3: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/rc/rc3
[   14.726733] usb 2-4: dvb_usb_v2: schedule remote query interval to 500 msecs
[   14.726736] usb 2-4: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   14.726766] usbcore: registered new interface driver dvb_usb_af9035

[giulux]

i listati vanno postati incollandoli tra i tag [ code] e [ /code] che si aprono cliccando su Codice sopra la finestra di scrittura
correggi il post precedente cliccando su modifica, poi evidenzia il listato e clicca su Codice e salva

[Xgaz]

Dmesg dopo aver installato media_build e firmware af 9035.

Codice: Seleziona tutto

   12.962640] videodev: disagrees about version of symbol media_entity_put
[   12.962645] videodev: Unknown symbol media_entity_put (err -22)
[   12.962681] videodev: Unknown symbol media_entity_remove_links (err 0)
[   12.962699] videodev: disagrees about version of symbol media_device_register_entity
[   12.962701] videodev: Unknown symbol media_device_register_entity (err -22)
[   12.962744] videodev: disagrees about version of symbol media_entity_get
[   12.962745] videodev: Unknown symbol media_entity_get (err -22)
[   12.962750] videodev: disagrees about version of symbol media_device_unregister_entity
[   12.962751] videodev: Unknown symbol media_device_unregister_entity (err -22)
[   13.047234] WARNING: You are using an experimental version of the media stack.
[   13.047234] 	As the driver is backported to an older kernel, it doesn't offer
[   13.047234] 	enough quality for its usage in production.
[   13.047234] 	Use it with care.
[   13.047234] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   13.047234] 	675722b0e3917c6c917f1aa5f6d005cd3a0479f5 Merge branch 'upstream-fixes' into patchwork
[   13.047234] 	989af88339db26345e23271dae1089d949c4a0f1 [media] v4l: vsp1: Add LUT support
[   13.047234] 	a626e64e0bee4fb26848dbed92223dde488f3d93 [media] v4l: vsp1: Add SRU support
[   13.050981] WARNING: You are using an experimental version of the media stack.
[   13.050981] 	As the driver is backported to an older kernel, it doesn't offer
[   13.050981] 	enough quality for its usage in production.
[   13.050981] 	Use it with care.
[   13.050981] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   13.050981] 	675722b0e3917c6c917f1aa5f6d005cd3a0479f5 Merge branch 'upstream-fixes' into patchwork
[   13.050981] 	989af88339db26345e23271dae1089d949c4a0f1 [media] v4l: vsp1: Add LUT support
[   13.050981] 	a626e64e0bee4fb26848dbed92223dde488f3d93 [media] v4l: vsp1: Add SRU support
[   13.067479] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   13.067601] radeon 0000:01:00.0: WB enabled
[   13.067605] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880212769c00
[   13.067608] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880212769c0c
[   13.067611] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.067612] [drm] Driver supports precise vblank timestamp query.
[   13.067649] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[   13.067662] radeon 0000:01:00.0: radeon: using MSI.
[   13.067687] [drm] radeon: irq initialized.
[   13.084203] [drm] ring test on 0 succeeded in 0 usecs
[   13.084261] [drm] ring test on 3 succeeded in 1 usecs
[   13.084675] [drm] ib test on ring 0 succeeded in 0 usecs
[   13.084694] [drm] ib test on ring 3 succeeded in 0 usecs
[   13.085387] [drm] Radeon Display Connectors
[   13.085390] [drm] Connector 0:
[   13.085391] [drm]   HDMI-A-1
[   13.085393] [drm]   HPD4
[   13.085395] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   13.085396] [drm]   Encoders:
[   13.085397] [drm]     DFP1: INTERNAL_UNIPHY1
[   13.085398] [drm] Connector 1:
[   13.085400] [drm]   DVI-I-1
[   13.085401] [drm]   HPD1
[   13.085403] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   13.085404] [drm]   Encoders:
[   13.085405] [drm]     DFP2: INTERNAL_UNIPHY
[   13.085406] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   13.085407] [drm] Connector 2:
[   13.085409] [drm]   VGA-1
[   13.085410] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   13.085411] [drm]   Encoders:
[   13.085412] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   13.085474] [drm] Internal thermal controller without fan control
[   13.085533] [drm] radeon: power management initialized
[   13.105003] usb 2-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   13.105375] usb 2-1: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   13.107315] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   13.107357] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   13.120790] [drm] fb mappable at 0xD0142000
[   13.120793] [drm] vram apper at 0xD0000000
[   13.120794] [drm] size 5324800
[   13.120796] [drm] fb depth is 24
[   13.120797] [drm]    pitch is 5888
[   13.120901] fbcon: radeondrmfb (fb0) is primary device
[   13.182384] i2c i2c-8: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   13.186261] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   13.336238] Console: switching to colour frame buffer device 180x56
[   13.339301] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   13.339303] radeon 0000:01:00.0: registered panic notifier
[   13.339311] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[   13.339374] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   13.339448] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   13.349867] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   13.614770] mxl5007t 8-0060: creating new instance
[   13.615523] mxl5007t_get_chip_id: unknown rev (3f)
[   13.615526] mxl5007t_get_chip_id: MxL5007T detected @ 8-0060
[   13.627147] Registered IR keymap rc-empty
[   13.627238] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc0/input12
[   13.628618] rc0: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc0
[   13.628625] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   13.628628] usb 2-1: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   13.630752] usb 2-2: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   13.631143] usb 2-2: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   13.633211] usb 2-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   13.633261] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   13.635647] i2c i2c-9: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   13.639524] usb 2-2: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[   13.982289] mxl5007t 9-0060: creating new instance
[   13.983031] mxl5007t_get_chip_id: unknown rev (3f)
[   13.983034] mxl5007t_get_chip_id: MxL5007T detected @ 9-0060
[   13.994911] Registered IR keymap rc-empty
[   13.995037] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1/input13
[   13.995101] rc1: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1
[   13.995108] usb 2-2: dvb_usb_v2: schedule remote query interval to 500 msecs
[   13.995112] usb 2-2: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   13.997035] usb 2-3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   13.997406] usb 2-3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   13.999729] usb 2-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   13.999777] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   14.002413] i2c i2c-10: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   14.006287] usb 2-3: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
[   14.350303] mxl5007t 10-0060: creating new instance
[   14.351042] mxl5007t_get_chip_id: unknown rev (3f)
[   14.351045] mxl5007t_get_chip_id: MxL5007T detected @ 10-0060
[   14.362672] Registered IR keymap rc-empty
[   14.362782] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc2/input14
[   14.363016] rc2: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc2
[   14.363023] usb 2-3: dvb_usb_v2: schedule remote query interval to 500 msecs
[   14.363027] usb 2-3: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   14.365169] usb 2-4: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   14.365541] usb 2-4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   14.367609] usb 2-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   14.367647] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   14.369780] i2c i2c-11: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   14.373676] usb 2-4: DVB: registering adapter 3 frontend 0 (Afatech AF9033 (DVB-T))...
[   14.714312] mxl5007t 11-0060: creating new instance
[   14.715054] mxl5007t_get_chip_id: unknown rev (3f)
[   14.715057] mxl5007t_get_chip_id: MxL5007T detected @ 11-0060
[   14.726559] Registered IR keymap rc-empty
[   14.726678] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/rc/rc3/input15
[   14.726728] rc3: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/rc/rc3
[   14.726733] usb 2-4: dvb_usb_v2: schedule remote query interval to 500 msecs
[   14.726736] usb 2-4: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   14.726766] usbcore: registered new interface driver dvb_usb_af9035

Si, anche a me con i media_build la a867 viene riconosciuta
Però se tento una scansione/visualizzazione canali si blocca...
Questo perchè ho il modello "sfigato" targato "DP7" con un tuner particolare che non accetta alcuni comandi del driver

Devo verificare con il kernel 3.12.2 perchè Unixer conferma che a lui funziona senza mettere i media_build/patch varie...

Quindi la situazione dovrebbe essere questa:

- kernel 3.12.2 -> driver A867 ok; driver TBS6981 non presente
- kernel 3.12.3 -3.12.x -> driver A867 buggato; driver TBS6981 non presente
- kernel 3.8.x-3.12.x + media_build -> driver A867 ok (tranne model "DP7"); driver TBS6981 presente (ok!??)
- kernel 3.8.x-3.12.x + driver TBS -> driver A867 non presente; driver TBS6981 ok

Quindi situazione alquanto incasinata...

Al limite bisognerà provare a mettere questa patch o nei media_build più vecchi o nel kernel 3.12.2...

Fammi fare delle verifiche; poi vediamo come procedere...

[Chgil]

Allora adesso ho ubuntu 13.04 kernel 3.8.0-34 e installato media_build solamente come da procedura e poi i 2 firmware
E la situazione è af9035 ok
TBS 6981 da un errore allego dmesg

Codice: Seleziona tutto

server@server:~$ uname -a
Linux server 3.8.0-34-generic #49-Ubuntu SMP Tue Nov 12 18:00:10 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

server@server:~$ dmesg | grep dvb
[   10.598527] usb 2-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   10.599017] usb 2-1: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   10.601214] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.064372] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.064377] usb 2-1: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   11.066283] usb 2-2: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   11.066655] usb 2-2: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   11.069349] usb 2-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.430712] usb 2-2: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.430715] usb 2-2: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   11.432670] usb 2-3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   11.433043] usb 2-3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   11.435606] usb 2-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.795539] usb 2-3: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.795544] usb 2-3: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   11.797558] usb 2-4: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   11.797928] usb 2-4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   11.800495] usb 2-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   12.159030] usb 2-4: dvb_usb_v2: schedule remote query interval to 500 msecs
[   12.159034] usb 2-4: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   12.159073] usbcore: registered new interface driver dvb_usb_af9035

server@server:~$ dmesg | grep frontend
[   10.708021] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.075163] usb 2-2: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.441178] usb 2-3: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.805815] usb 2-4: DVB: registering adapter 3 frontend 0 (Afatech AF9033 (DVB-T))...

server@server:~$ dmesg | grep cx23885
[   10.760947] cx23885: disagrees about version of symbol altera_init
[   10.760949] cx23885: Unknown symbol altera_init (err -22)

dmesg

[    1.140053] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.277346] usb 2-2: New USB device found, idVendor=07ca, idProduct=a867
[    1.277350] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=
[    1.277353] usb 2-2: Product: A867
[    1.277356] usb 2-2: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[    1.277359] usb 2-2: SerialNumber: 
[    1.356080] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.356094] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.356215] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.356231] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.372535] ata1.00: ATA-8: WDC WD3200AAKS-00B3A0, 01.03A01, max UDMA/133
[    1.372539] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.372635] ata2.00: ATA-8: MAXTOR STM3500320AS, MX1A, max UDMA/133
[    1.372639] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.372733] ata1.01: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[    1.372736] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.372820] ata2.01: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[    1.372824] ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.380561] ata1.00: configured for UDMA/133
[    1.388051] usb 2-3: new high-speed USB device number 4 using ehci-pci
[    1.388294] ata1.01: configured for UDMA/133
[    1.388429] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
[    1.388554] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.388555] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.388614] sd 0:0:0:0: [sda] Write Protect is off
[    1.388616] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.388673] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG HD103SI  1AG0 PQ: 0 ANSI: 5
[    1.388674] ata2.00: configured for UDMA/133
[    1.388775] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.388799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.388816] sd 0:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.388983] sd 0:0:1:0: [sdb] Write Protect is off
[    1.388986] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.389026] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.396277] ata2.01: configured for UDMA/133
[    1.396393] scsi 1:0:0:0: Direct-Access     ATA      MAXTOR STM350032 MX1A PQ: 0 ANSI: 5
[    1.396518] sd 1:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.396567] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    1.396588] sd 1:0:0:0: [sdc] Write Protect is off
[    1.396591] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.396611] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.396654] scsi 1:0:1:0: Direct-Access     ATA      SAMSUNG HD103SI  1AG0 PQ: 0 ANSI: 5
[    1.396743] sd 1:0:1:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.396769] sd 1:0:1:0: Attached scsi generic sg3 type 0
[    1.396890] sd 1:0:1:0: [sdd] Write Protect is off
[    1.396893] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[    1.396913] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.438354]  sda: sda1 sda2 < sda5 >
[    1.448300]  sdb: sdb1
[    1.448393] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.448549] sd 0:0:1:0: [sdb] Attached SCSI disk
[    1.459101]  sdd: sdd1
[    1.468077] tsc: Refined TSC clocksource calibration: 2399.912 MHz
[    1.468083] Switching to clocksource tsc
[    1.489372]  sdc: sdc1
[    1.489426] sd 1:0:1:0: [sdd] Attached SCSI disk
[    1.489685] sd 1:0:0:0: [sdc] Attached SCSI disk
[    1.490993] Freeing unused kernel memory: 1000k freed
[    1.491246] Write protecting the kernel read-only data: 12288k
[    1.494342] Freeing unused kernel memory: 1164k freed
[    1.497298] Freeing unused kernel memory: 1076k freed
[    1.508860] udevd[109]: starting version 175
[    1.525354] usb 2-3: New USB device found, idVendor=07ca, idProduct=a867
[    1.525359] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.525362] usb 2-3: Product: A867
[    1.525364] usb 2-3: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[    1.525366] usb 2-3: SerialNumber: 
[    1.567394] Disabling lock debugging due to kernel taint
[    1.567935] ahci 0000:04:00.0: version 3.0
[    1.567976] ahci 0000:04:00.0: JMB361 has only one port
[    1.567985] ahci 0000:04:00.0: forcing port_map 0x3 -> 0x1
[    1.571894] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.577693] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[    1.577868] r8169 0000:05:00.0 eth0: RTL8168b/8111b at 0xffffc90000c5e000, 00:19:db:cd:3d:9b, XID 18000000 IRQ 45
[    1.577871] r8169 0000:05:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    1.584045] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[    1.584050] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.587790] scsi4 : ahci
[    1.591094] scsi5 : ahci
[    1.591173] ata5: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16
[    1.591176] ata6: DUMMY
[    1.591236] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
[    1.591275] pata_jmicron 0000:04:00.1: setting latency timer to 64
[    1.594831] scsi6 : pata_jmicron
[    1.596985] scsi7 : pata_jmicron
[    1.597034] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[    1.597037] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[    1.636047] usb 2-4: new high-speed USB device number 5 using ehci-pci
[    1.676085] firewire_ohci 0000:06:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.773359] usb 2-4: New USB device found, idVendor=07ca, idProduct=a867
[    1.773364] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.773368] usb 2-4: Product: A867
[    1.773371] usb 2-4: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[    1.773374] usb 2-4: SerialNumber: 
[    1.800309] ata7.01: ATA-7: ST3250820AV, 3.ACH, max UDMA/100
[    1.800313] ata7.01: 488397168 sectors, multi 0: LBA48 
[    1.875209] ata7.01: configured for UDMA/100
[    1.908332] ata5: SATA link down (SStatus 0 SControl 300)
[    1.908567] scsi 6:0:1:0: Direct-Access     ATA      ST3250820AV      3.AC PQ: 0 ANSI: 5
[    1.908743] sd 6:0:1:0: [sde] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.908795] sd 6:0:1:0: [sde] Write Protect is off
[    1.908798] sd 6:0:1:0: [sde] Mode Sense: 00 3a 00 00
[    1.908808] sd 6:0:1:0: Attached scsi generic sg4 type 0
[    1.909036] sd 6:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.955338]  sde: sde1 sde2 < sde5 >
[    1.955652] sd 6:0:1:0: [sde] Attached SCSI disk
[    1.988868] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.988872] EXT4-fs (sda1): write access will be enabled during recovery
[    2.144085] usb 2-6: new high-speed USB device number 7 using ehci-pci
[    2.176143] firewire_core 0000:06:04.0: created device fw0: GUID 0010dc00012f5171, S400
[    2.285254] usb 2-6: New USB device found, idVendor=13fe, idProduct=1f00
[    2.285260] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.285264] usb 2-6: Product: DataTraveler 2.0
[    2.285267] usb 2-6: Manufacturer: Kingston
[    2.285270] usb 2-6: SerialNumber: 5B84120000DC
[    2.290673] Initializing USB Mass Storage driver...
[    2.290831] scsi8 : usb-storage 2-6:1.0
[    2.290948] usbcore: registered new interface driver usb-storage
[    2.290950] USB Mass Storage support registered.
[    2.447314] EXT4-fs (sda1): recovery complete
[    2.452845] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.524025] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    2.706394] usb 7-1: New USB device found, idVendor=046d, idProduct=c52e
[    2.706399] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.706403] usb 7-1: Product: USB Receiver
[    2.706406] usb 7-1: Manufacturer: Logitech
[    3.289305] scsi 8:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[    3.289880] sd 8:0:0:0: Attached scsi generic sg5 type 0
[    3.290418] sd 8:0:0:0: [sdf] 3919872 512-byte logical blocks: (2.00 GB/1.86 GiB)
[    3.291040] sd 8:0:0:0: [sdf] Write Protect is off
[    3.291045] sd 8:0:0:0: [sdf] Mode Sense: 23 00 00 00
[    3.291665] sd 8:0:0:0: [sdf] No Caching mode page found
[    3.291669] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[    3.294540] sd 8:0:0:0: [sdf] No Caching mode page found
[    3.294544] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[    3.295306]  sdf:
[    3.297416] sd 8:0:0:0: [sdf] No Caching mode page found
[    3.297419] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[    3.297423] sd 8:0:0:0: [sdf] Attached SCSI removable disk
[    9.649697] Adding 8387580k swap on /dev/sda5.  Priority:-1 extents:1 across:8387580k 
[    9.752659] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.781475] udevd[372]: starting version 175
[   10.153103] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[   10.153449] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
[   10.153456] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.153486] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.155462] lp: driver loaded but no devices found
[   10.172276] [drm] Initialized drm 1.1.0 20060810
[   10.188997] type=1400 audit(1387275982.091:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=496 comm="apparmor_parser"
[   10.189371] type=1400 audit(1387275982.091:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=496 comm="apparmor_parser"
[   10.189580] type=1400 audit(1387275982.091:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=496 comm="apparmor_parser"
[   10.192059] type=1400 audit(1387275982.095:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=509 comm="apparmor_parser"
[   10.192434] type=1400 audit(1387275982.095:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser"
[   10.192644] type=1400 audit(1387275982.095:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser"
[   10.218408] [drm] radeon defaulting to kernel modesetting.
[   10.218413] [drm] radeon kernel modesetting enabled.
[   10.221009] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x174B:0x3000).
[   10.221049] [drm] register mmio base: 0xFE5E0000
[   10.221051] [drm] register mmio size: 131072
[   10.221150] ATOM BIOS: AMD
[   10.221179] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   10.221182] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   10.224646] [drm] Detected VRAM RAM=1024M, BAR=256M
[   10.224650] [drm] RAM width 64bits DDR
[   10.232319] gpio_ich: GPIO from 206 to 255 on gpio_ich
[   10.232418] [TTM] Zone  kernel: Available graphics memory: 4088838 kiB
[   10.232421] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   10.232422] [TTM] Initializing pool allocator
[   10.232427] [TTM] Initializing DMA pool allocator
[   10.232455] [drm] radeon: 1024M of VRAM memory ready
[   10.232457] [drm] radeon: 512M of GTT memory ready.
[   10.232486] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.233535] [drm] probing gen 2 caps for device 8086:29a1 = 1/0
[   10.233609] [drm] Loading CEDAR Microcode
[   10.272610] parport_pc 00:07: reported by Plug and Play ACPI
[   10.272654] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   10.293156] ppdev: user-space parallel port driver
[   10.313312] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   10.333122] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[   10.333261] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[   10.333391] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   10.333510] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   10.333624] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.333742] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.333859] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.360348] lp0: using parport0 (interrupt-driven).
[   10.364256] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[   10.366311] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.375161] coretemp coretemp.0: Using relative temperature scale!
[   10.375175] coretemp coretemp.0: Using relative temperature scale!
[   10.392012] media: Linux media interface: v0.10
[   10.482474] Linux video capture interface: v2.00
[   10.482478] WARNING: You are using an experimental version of the media stack.
[   10.482478] 	As the driver is backported to an older kernel, it doesn't offer
[   10.482478] 	enough quality for its usage in production.
[   10.482478] 	Use it with care.
[   10.482478] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   10.482478] 	675722b0e3917c6c917f1aa5f6d005cd3a0479f5 Merge branch 'upstream-fixes' into patchwork
[   10.482478] 	989af88339db26345e23271dae1089d949c4a0f1 [media] v4l: vsp1: Add LUT support
[   10.482478] 	a626e64e0bee4fb26848dbed92223dde488f3d93 [media] v4l: vsp1: Add SRU support
[   10.509229] WARNING: You are using an experimental version of the media stack.
[   10.509229] 	As the driver is backported to an older kernel, it doesn't offer
[   10.509229] 	enough quality for its usage in production.
[   10.509229] 	Use it with care.
[   10.509229] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   10.509229] 	675722b0e3917c6c917f1aa5f6d005cd3a0479f5 Merge branch 'upstream-fixes' into patchwork
[   10.509229] 	989af88339db26345e23271dae1089d949c4a0f1 [media] v4l: vsp1: Add LUT support
[   10.509229] 	a626e64e0bee4fb26848dbed92223dde488f3d93 [media] v4l: vsp1: Add SRU support
[   10.510761] WARNING: You are using an experimental version of the media stack.
[   10.510761] 	As the driver is backported to an older kernel, it doesn't offer
[   10.510761] 	enough quality for its usage in production.
[   10.510761] 	Use it with care.
[   10.510761] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   10.510761] 	675722b0e3917c6c917f1aa5f6d005cd3a0479f5 Merge branch 'upstream-fixes' into patchwork
[   10.510761] 	989af88339db26345e23271dae1089d949c4a0f1 [media] v4l: vsp1: Add LUT support
[   10.510761] 	a626e64e0bee4fb26848dbed92223dde488f3d93 [media] v4l: vsp1: Add SRU support
[   10.598527] usb 2-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   10.599017] usb 2-1: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   10.601214] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   10.601269] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   10.695702] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   10.695845] radeon 0000:01:00.0: WB enabled
[   10.695850] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8802162e4c00
[   10.695853] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8802162e4c0c
[   10.695856] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.695857] [drm] Driver supports precise vblank timestamp query.
[   10.695897] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[   10.695909] radeon 0000:01:00.0: radeon: using MSI.
[   10.695939] [drm] radeon: irq initialized.
[   10.704144] i2c i2c-0: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   10.708021] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   10.712544] [drm] ring test on 0 succeeded in 0 usecs
[   10.712602] [drm] ring test on 3 succeeded in 1 usecs
[   10.713019] [drm] ib test on ring 0 succeeded in 0 usecs
[   10.713038] [drm] ib test on ring 3 succeeded in 0 usecs
[   10.713682] [drm] Radeon Display Connectors
[   10.713685] [drm] Connector 0:
[   10.713686] [drm]   HDMI-A-1
[   10.713688] [drm]   HPD4
[   10.713690] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   10.713691] [drm]   Encoders:
[   10.713692] [drm]     DFP1: INTERNAL_UNIPHY1
[   10.713693] [drm] Connector 1:
[   10.713695] [drm]   DVI-I-1
[   10.713696] [drm]   HPD1
[   10.713697] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   10.713699] [drm]   Encoders:
[   10.713700] [drm]     DFP2: INTERNAL_UNIPHY
[   10.713701] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   10.713702] [drm] Connector 2:
[   10.713703] [drm]   VGA-1
[   10.713705] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   10.713706] [drm]   Encoders:
[   10.713707] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   10.713774] [drm] Internal thermal controller without fan control
[   10.713828] [drm] radeon: power management initialized
[   10.749267] [drm] fb mappable at 0xD0142000
[   10.749270] [drm] vram apper at 0xD0000000
[   10.749271] [drm] size 5324800
[   10.749273] [drm] fb depth is 24
[   10.749274] [drm]    pitch is 5888
[   10.749388] fbcon: radeondrmfb (fb0) is primary device
[   10.760947] cx23885: disagrees about version of symbol altera_init
[   10.760949] cx23885: Unknown symbol altera_init (err -22)
[   10.777834] usbcore: registered new interface driver usbhid
[   10.777834] usbhid: USB HID core driver
[   10.802333] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input9
[   10.802477] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[   10.802975] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/input/input10
[   10.804251] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[   10.981010] Console: switching to colour frame buffer device 180x56
[   10.983993] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   10.984007] radeon 0000:01:00.0: registered panic notifier
[   10.984014] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[   10.984075] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.984159] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   11.005267] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   11.051820] mxl5007t 0-0060: creating new instance
[   11.052533] mxl5007t_get_chip_id: unknown rev (3f)
[   11.052537] mxl5007t_get_chip_id: MxL5007T detected @ 0-0060
[   11.064035] Registered IR keymap rc-empty
[   11.064148] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc0/input12
[   11.064365] rc0: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc0
[   11.064372] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.064377] usb 2-1: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   11.066283] usb 2-2: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   11.066655] usb 2-2: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   11.069349] usb 2-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.069400] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   11.071326] i2c i2c-9: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   11.075163] usb 2-2: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.418299] mxl5007t 9-0060: creating new instance
[   11.419109] mxl5007t_get_chip_id: unknown rev (3f)
[   11.419112] mxl5007t_get_chip_id: MxL5007T detected @ 9-0060
[   11.430548] Registered IR keymap rc-empty
[   11.430658] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1/input13
[   11.430707] rc1: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1
[   11.430712] usb 2-2: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.430715] usb 2-2: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   11.432670] usb 2-3: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   11.433043] usb 2-3: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   11.435606] usb 2-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.435652] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   11.437170] i2c i2c-10: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   11.441178] usb 2-3: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.782812] mxl5007t 10-0060: creating new instance
[   11.783553] mxl5007t_get_chip_id: unknown rev (3f)
[   11.783556] mxl5007t_get_chip_id: MxL5007T detected @ 10-0060
[   11.795183] Registered IR keymap rc-empty
[   11.795293] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc2/input14
[   11.795532] rc2: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc2
[   11.795539] usb 2-3: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.795544] usb 2-3: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   11.797558] usb 2-4: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
[   11.797928] usb 2-4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
[   11.800495] usb 2-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.800542] DVB: registering new adapter (AVerMedia HD Volar (A867))
[   11.801807] i2c i2c-11: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[   11.805815] usb 2-4: DVB: registering adapter 3 frontend 0 (Afatech AF9033 (DVB-T))...
[   12.146325] mxl5007t 11-0060: creating new instance
[   12.147066] mxl5007t_get_chip_id: unknown rev (3f)
[   12.147069] mxl5007t_get_chip_id: MxL5007T detected @ 11-0060
[   12.158822] Registered IR keymap rc-empty
[   12.158951] input: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/rc/rc3/input15
[   12.159023] rc3: AVerMedia HD Volar (A867) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/rc/rc3
[   12.159030] usb 2-4: dvb_usb_v2: schedule remote query interval to 500 msecs
[   12.159034] usb 2-4: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected
[   12.159073] usbcore: registered new interface driver dvb_usb_af9035
[   12.556292] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.676831] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[   12.850941] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   26.848052] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   26.848059] ata2.00: failed command: SET FEATURES
[   26.848066] ata2.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[   26.848066]          res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout)
[   26.848070] ata2.00: status: { DRDY }
[   26.848078] ata2.00: hard resetting link
[   27.168076] ata2.01: hard resetting link
[   27.644083] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   27.644097] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   27.676537] ata2.00: configured for UDMA/133
[   27.684282] ata2.01: configured for UDMA/133
[   27.684299] ata2: EH complete
[   28.231202] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[   28.338486] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   28.388122] init: failsafe main process (986) killed by TERM signal
[   28.550499] Bluetooth: Core ver 2.16
[   28.550518] NET: Registered protocol family 31
[   28.550520] Bluetooth: HCI device and connection manager initialized
[   28.550756] Bluetooth: HCI socket layer initialized
[   28.550759] Bluetooth: L2CAP socket layer initialized
[   28.550765] Bluetooth: SCO socket layer initialized
[   28.554083] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   28.554086] Bluetooth: BNEP filters: protocol multicast
[   28.554091] Bluetooth: BNEP socket layer initialized
[   28.562598] Bluetooth: RFCOMM TTY layer initialized
[   28.562610] Bluetooth: RFCOMM socket layer initialized
[   28.562612] Bluetooth: RFCOMM ver 1.11
[   28.660299] type=1400 audit(1387276000.563:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1061 comm="apparmor_parser"
[   28.660365] type=1400 audit(1387276000.563:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1062 comm="apparmor_parser"
[   28.660595] type=1400 audit(1387276000.563:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1061 comm="apparmor_parser"
[   28.660663] type=1400 audit(1387276000.563:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1062 comm="apparmor_parser"
[   28.663574] type=1400 audit(1387276000.563:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1063 comm="apparmor_parser"
[   28.663678] type=1400 audit(1387276000.563:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1064 comm="apparmor_parser"
[   28.663868] type=1400 audit(1387276000.563:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1063 comm="apparmor_parser"
[   28.664081] type=1400 audit(1387276000.567:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1064 comm="apparmor_parser"
[   28.664294] type=1400 audit(1387276000.567:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1064 comm="apparmor_parser"
[   28.672169] type=1400 audit(1387276000.575:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1065 comm="apparmor_parser"
[   29.011810] init: avahi-cups-reload main process (1135) terminated with status 1
[   30.573321] r8169 0000:05:00.0 eth0: link down
[   30.573335] r8169 0000:05:00.0 eth0: link down
[   30.573387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.573597] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.993507] r8169 0000:05:00.0 eth0: link up
[   32.993517] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   41.251104] systemd-hostnamed[2149]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
server@server:~$ 

come si installa la patch?

Altrimenti pensavo di passare ad altro kernel o addirittura a 13.10 forse si risolve.

grazie ancora

[Xgaz]

Allora adesso ho ubuntu 13.04 kernel 3.8.0-34 e installato media_build solamente come da procedura e poi i 2 firmware
E la situazione è af9035 ok

Prova anche una scansione; se è come la mia in teoria dovrebbe bloccarsi...se non si blocca è tutto ok!

TBS 6981 da un errore allego dmesg

Codice: Seleziona tutto

server@server:~$ dmesg | grep cx23885
[   10.760947] cx23885: disagrees about version of symbol altera_init
[   10.760949] cx23885: Unknown symbol altera_init (err -22)

Questo, ho paura, che sia sempre un problema dei media_build

server@server:~$ dmesg | grep frontend

Codice: Seleziona tutto

[   10.708021] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.075163] usb 2-2: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.441178] usb 2-3: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.805815] usb 2-4: DVB: registering adapter 3 frontend 0 (Afatech AF9033 (DVB-T))...

Questo è mooolto strano...perchè ti vede quattro adapter??? Hai quattro pennette A867 inserite!??

come si installa la patch?

Bisognai applicarla, ai sorgenti del kernel e ricompilare tutto. Però ricompilare tutto il kernel è molto pericoloso perchè, avendo Ubuntu un kernel "non puro" ma già patchato ad hoc, è facile che poi il sistema non funzioni più...
Molto più sicuro ricompilare solo il driver per cx23885; ma per farlo bisogna prendere solo i sorgenti per tale driver e creare un Makefile fatto apposta...
In passato l'ho già fatto per altri driver...ma avevo più tempo da dedicarci! Adesso sinceramente non posso promettere niente!!

Spero di essermi spiegato bene...

Altrimenti pensavo di passare ad altro kernel o addirittura a 13.10 forse si risolve.

Forse con i kernel 3.13 (che sono ancora in RC) forse si risolve; con la 13.10 non credo avendo sempre kernel vecchi senza driver TBS...

[Xgaz]

Aperto OT:

Altrimenti pensavo di passare ad altro kernel o addirittura a 13.10 forse si risolve.

Forse con i kernel 3.13 (che sono ancora in RC) forse si risolve; con la 13.10 non credo avendo sempre kernel vecchi senza driver TBS...

Confermato...il supporto per la tua TBS6981 è nel kernel 3.13 RC4: https://www.kernel.org/diff/diffview.cg ... .xz;z=4347

Però i pacchetti immagine per Ubuntu non sono ancora disponibili: http://kernel.ubuntu.com/~kernel-ppa/ma ... c4-trusty/
Abbi pazienza ancora un paio di giorni...

Chiudo OT sulla scheda pci non relativa alla discussione

[Chgil]

grazie tante di tutto

Attenderò qualche giorno e poi provo kernel 3.13 RC4.

Ma secondo te se tornoa ubuntu 12.04.3 lts forse risolvo???


grazie ancora

[Xgaz]

Ma secondo te se tornoa ubuntu 12.04.3 lts forse risolvo???

Non credo, visto che ha il kernel 3.8.0...forse la A867 si; TBS no sicuramente! Se ci metti i driver TBS del produttore, perdi anche la A867...

[davideddu]

Può sempre mettersi la LTS e scaricarsi il kernel aggiornato col tool di lffl.org...

[Xgaz]

Può sempre mettersi la LTS e scaricarsi il kernel aggiornato col tool di lffl.org...

Lo script di lffl aggiorna al kernel 3.12.5 (l'ultimo stable) che abbiamo visto non ha i driver per TBS e ha qualche bug per le AF9035....

L'unico che ha un supporto per le TBS è il 3.13 rc4 ...però a quanto pare non sono ancora pronti tutti i .deb per Ubuntu...

[davideddu]

Può sempre mettersi la LTS e scaricarsi il kernel aggiornato col tool di lffl.org...

Lo script di lffl aggiorna al kernel 3.12.5 (l'ultimo stable) che abbiamo visto non ha i driver per TBS e ha qualche bug per le AF9035....

L'unico che ha un supporto per le TBS è il 3.13 rc4 ...però a quanto pare non sono ancora pronti tutti i .deb per Ubuntu...

Dato che è una RC basterà aspettare qualche settimana e diventerà ufficiale stabile...

[LanceArmstrong85]

Salve ragazzi,
volevo sapere se c'erano novità sul problema segnalato nei precedenti post per i tuner A835 e A867:

Codice: Seleziona tutto

dvb_usb_af9035: too much data wlen=64 rlen=0

Io sono in possesso di un tuner Nilox NX20 equipaggiato di chipset AF9035/TUA9001 (la stessa combinazione del Terratec Cinergy Stick T) e sto tentando di farlo andare su Raspberry
con l'ultima release di Raspbmc basata su kernel 3.10.24 ed ho lo stesso problema.
Su amazon altri utenti che hanno acquistato lo stesso dispositivo sono riusciti a farlo funzionare sembrerebbe senza grossi problemi proprio con Raspberry e Raspbmc.
http://www.amazon.it/gp/product/B004APAO1G/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1

Leggevo che il problema poteva riguardare i media_build, anche se con l'ultimissima versione tutto funzionerebbe. Ora io ci sto lavorando in questi giorni, quindi con git dovrei
aver scaricato la versione più aggiornata.
Fatto sta che il problema rimane, tra l'altro ho provato a rimuovere la cartella media_build (non so se così facendo ho rimosso i driver appena compilati),
ma mi restituisce lo stesso errore.

In precedenza, ma solo per prova, avevo provato ad installarlo su Ubuntu 13.10. Qui tutto sembra funzionare, con dmesg l'uscita è corretta, infatti alla fine viene scritto:

Codice: Seleziona tutto

AF9035 reference design successfully initialized and connected

. Viene creata correttamente anche la cartella /dev/dvb.
In realtà il dispositivo non funziona: infatti la lucina blu rimane spenta e quando provo ad effettuare la ricerca dei canali mi restituisce il seguente errore (per ogni canale ricercato):

Codice: Seleziona tutto

i2c i2c-0: tua9001: i2c wr failed=-5 reg=1e

E' un problema già riscontrato in passato, purtroppo non riesco più a ritrovare il forum, ma xgaz in passato ci aveva già lavorato, anche se poi quell'utente risolse da solo senza capire bene come.

Che consigli mi date per districarmi tra i due errori? (In realtà quello essenziale è quello relativo al raspberry).
Per il raspberry pensavo di trovare una versione di raspbmc più vecchia con kernel 3.8 se esiste che mi sembra funzioni bene. Purtroppo non ho trovato un repository con versioni più vecchie.
Altrimenti potrei provare con Raspbian ed installare a mano XBMC (non so se è difficile o sorgeranno altri problemi). Di Raspbian ho trovato versioni che risalgono ad oltre un anno fa ma non so come campire che kernel usano. Avete qualche idea?

Grazie mille in anticipo e buon anno nuovo!

[Xgaz]

In teoria i problemi ci sono con i kernel >3.12.2 e spariscono con gli ultimi commit del 3.13 ; quindi mettendo i media_build, che sono riferiti al 3.13, i problemi dovevano sparire...

Non ho mai compilato kernel/media_build su un Raspberry, quindi "prendi con le pinze" i miei suggerimenti...

Potresti provare a mettere il kernel 3.12 per rasp seguendo questa guida: http://elinux.org/RPi_Kernel_Compilatio ... nel_source

Nella guida ci sono le indicazioni per i kernel fino al 3.8, ma il kernel aggiornato puoi trovarlo qui: https://github.com/raspberrypi/linux/ar ... 3.12.y.zip


O meglio, se dici che sul 3.8 potrebbe funzionare, prova direttamente con il 3.8 ( ma non so se poi xbmc gira correttamente!)...

[Chgil]

Un ringraziamento è dovuto a xgaz.
Il mio problema di fare condividere tbs 6981 e af 9035 l ho risolto installando il kernel 3.13 RC5, e installando i media_ build e tutto funziona correttamente.
Spero di essere utile a qualcuno anche se i più utili siete sempre tutti voi del forum