prese usb non vanno

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
20111954
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1299
Iscrizione: domenica 18 ottobre 2009, 20:36
Distribuzione: Xubuntu 18.04.5 LTS
Sesso: Maschile
Località: Reggio Calabria

prese usb non vanno

Messaggio da 20111954 »

buona sera, ho installato la nuova versione di ubuntu e sto provando le funzionalità del pc, due prese usb su tre non funzionano,come farle funzionare?
Avatar utente
trekfan1
Moderatore Globale
Moderatore Globale
Messaggi: 23381
Iscrizione: domenica 21 maggio 2006, 10:51
Desktop: Gnome
Distribuzione: Ubuntu 23.10 e 24.04 (dev)
Sesso: Maschile
Località: Formigine (MO) | Accecante Asceta

Re: prese usb non vanno

Messaggio da trekfan1 »

Che pc è? E' un fisso o un portatile? Che configurazione hardware ha? Scusa ma ci si è rotta la palla di cristallo appena finita la garanzia...
Avatar utente
jackynet92
Moderatore Globale
Moderatore Globale
Messaggi: 13413
Iscrizione: sabato 3 settembre 2011, 1:41
Desktop: Mate
Distribuzione: Ubuntu 16.04 64bit
Sesso: Maschile
Località: Torino

Re: prese usb non vanno

Messaggio da jackynet92 »

Inoltre, hai provato con altri SO per essere sicuro che non sia un problema hardware?
Avatar utente
20111954
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1299
Iscrizione: domenica 18 ottobre 2009, 20:36
Distribuzione: Xubuntu 18.04.5 LTS
Sesso: Maschile
Località: Reggio Calabria

Re: prese usb non vanno

Messaggio da 20111954 »

caratteristiche del pc sono:
-Memoria 2,9 gb,
processore intel core 2 cpu t7600 @,1.83 ghz x 2,
grafica geforce go 7600 pcie-sse2,
sistema operativo 64 bit,

su questo portatile ho avuto installato xp e poi w 7, non ricordo se funzionavano con gli altri sistemi operativi
Avatar utente
thece
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 12943
Iscrizione: lunedì 23 aprile 2007, 14:16
Distribuzione: Debian 12 (Bookworm) - KDE

Re: prese usb non vanno

Messaggio da thece »

:ciao:

io proverei a fare la seguente cosa: apri due terminali. Sul primo terminale fai un tail sul log di sistema

Codice: Seleziona tutto

tail -f /var/log/syslog
per monitorare eventuali errori (alla fine dovrai premere CTRL + c per terminare il comando).
Attacchi e stacchi una chiavetta USB dalle varie porte e per ogni attacco sul secondo terminale dai il seguente comando per monitorare cosa viene identificato

Codice: Seleziona tutto

lsusb -t
Avatar utente
20111954
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1299
Iscrizione: domenica 18 ottobre 2009, 20:36
Distribuzione: Xubuntu 18.04.5 LTS
Sesso: Maschile
Località: Reggio Calabria

Re: prese usb non vanno

Messaggio da 20111954 »

questo è il risultato, del primo terminale ho dato questo comando tail -f /var/log/syslog
nel secondo terminale ho dato questo comando lsusb -t

Codice: Seleziona tutto

pippo@pippo-HEL80C:~$ tail -f /var/log/syslog
Aug  6 21:20:54 pippo-HEL80C gnome-session[2762]: Nautilus-Share-Message: Called "net usershare info" but it failed: Esecuzione del processo figlio "net" non riuscita (File o directory non esistente)
Aug  6 21:21:59 pippo-HEL80C udisksd[3009]: Cleaning up mount point /media/pippo/DA 2 GIGA (device 8:16 is not mounted)
Aug  6 21:21:59 pippo-HEL80C udisksd[3009]: Unmounted /dev/sdb on behalf of uid 1000
Aug  6 21:22:01 pippo-HEL80C kernel: [  450.830171] usb 1-5: USB disconnect, device number 6
Aug  6 21:22:02 pippo-HEL80C org.freedesktop.Notifications[2617]: ** (notify-osd:2898): WARNING **: dnd_is_screensaver_active(): Got error "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Aug  6 21:22:33 pippo-HEL80C kernel: [  482.585471] perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Aug  6 21:25:17 pippo-HEL80C org.gtk.vfs.Daemon[2617]: ** (gvfsd:2694): WARNING **: dbus_mount_reply: Error from org.gtk.vfs.Mountable.mount(): Recupero dell'elenco delle condivisioni dal server non riuscito: Connessione scaduta
Aug  6 21:25:17 pippo-HEL80C org.gtk.vfs.Daemon[2617]: ** (process:3571): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: La posizione specificata non è montata
Aug  6 21:28:32 pippo-HEL80C com.canonical.Unity.Scope.Applications[2617]: Error loading package indexes: Couldn't stat '/var/cache/software-center/xapian'
Aug  6 21:28:32 pippo-HEL80C com.canonical.Unity.Scope.Applications[2617]: (unity-scope-loader:3790): unity-applications-daemon-CRITICAL **: daemon.vala:144: Failed to load Software Center index. 'Apps Available for Download' will not be listed


Aug  6 21:29:35 pippo-HEL80C org.gtk.vfs.Daemon[2617]: ** (gvfsd:2694): WARNING **: dbus_mount_reply: Error from org.gtk.vfs.Mountable.mount(): Recupero dell'elenco delle condivisioni dal server non riuscito: Connessione scaduta
Aug  6 21:29:35 pippo-HEL80C org.gtk.vfs.Daemon[2617]: ** (process:3562): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: La posizione specificata non è montata

Aug  6 21:30:09 pippo-HEL80C systemd[1]: Starting Cleanup of Temporary Directories...
Aug  6 21:30:09 pippo-HEL80C systemd-tmpfiles[3872]: [/usr/lib/tmpfiles.d/var.conf:14] Duplicate line for path "/var/log", ignoring.
Aug  6 21:30:09 pippo-HEL80C systemd[1]: Started Cleanup of Temporary Directories.

Aug  6 21:33:57 pippo-HEL80C org.gtk.vfs.Daemon[2617]: ** (gvfsd:2694): WARNING **: dbus_mount_reply: Error from org.gtk.vfs.Mountable.mount(): Recupero dell'elenco delle condivisioni dal server non riuscito: Connessione scaduta
Aug  6 21:33:57 pippo-HEL80C org.gtk.vfs.Daemon[2617]: ** (process:3595): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: La posizione specificata non è montata


dal secondo terminale
pippo@pippo-HEL80C:~$ lsusb -t
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 2: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
    |__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=gspca_sn9c20x, 480M
    |__ Port 5: Dev 8, If 0, Class=Mass Storage, Driver=usb-storage, 480M
    |__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=, 480M
pippo@pippo-HEL80C:~$ lsusb -t
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 2: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
    |__ Port 3: Dev 9, If 0, Class=Mass Storage, Driver=usb-storage, 480M
    |__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=gspca_sn9c20x, 480M
    |__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=, 480M
pippo@pippo-HEL80C:~$ lsusb -t
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 2: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
    |__ Port 1: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 480M
    |__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=gspca_sn9c20x, 480M
    |__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=, 480M
pippo@pippo-HEL80C:~$ 
pippo@pippo-HEL80C:~$ lsusb -t
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 2: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 2: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
    |__ Port 1: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 480M
    |__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=gspca_sn9c20x, 480M
    |__ Port 8: Dev 5, If 0, Class=Vendor Specific Class, Driver=, 480M
pippo@pippo-HEL80C:~$ 
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 8 ospiti