Creare DVD boot windows

Informazioni, consigli e novità sulla galassia delle distribuzioni GNU/Linux, *nix, *BSD e su altri sistemi operativi non liberi.
Avatar utente
Nooby
Prode Principiante
Messaggi: 26
Iscrizione: sabato 3 ottobre 2015, 16:49
Desktop: Unity
Distribuzione: Ubuntu 16.04 Xenial Xerus
Sesso: Maschile

Creare DVD boot windows

Messaggio da Nooby »

Scrivo qui perchè mi sembra la sezione più appropiata:
Praticamente il mio problema è questo, ho provato sia con k3b (che si apre da solo ogni qual volta inserisco un disco nell'entrata del pc se qualcuno sa come disattivarla,magari da terminale gliene sarei grato) sia con brasero a masterizzare l'immagine ISO di windows 10 su un dvd vergine (windows pesa 4.4gb e il dvd ha 4.7gb di spazio) praticamente con k3b nemmeno parte la masterizzazione ma mi da subito errore, con brasero invece riesco ad arrivare al 100% e poi va in "completamento scrittura" dopodichè fallisce e mi sputa il dvd.
Consigli/suggerimenti? ovviamente i dvd sono vergini e ho provato + volte a farlo (vorrei scrivere l'immagine su DVD e non su usb , so che potrei installare anche da usb)
vi posto l'error-message di brasero

Codice: Seleziona tutto

BraseroLibburn called brasero_job_get_session_output_size
BraseroLibburn called brasero_job_set_current_action
BraseroLibburn called brasero_job_get_session_output_size
BraseroLibburn called brasero_job_set_current_action
BraseroLibburn Asynchronous SCSI error on SYNCHRONIZE CACHE: [3 73 04] Medium error. Program memory area update failure.
BraseroLibburn Closing
BraseroLibburn called brasero_job_set_dangerous
BraseroLibburn called brasero_job_set_current_action
BraseroLibburn Async SYNCHRONIZE CACHE failed after 2.9 seconds
BraseroLibburn Closing track 01  (absolute track number 1)
BraseroLibburn Asynchronous SCSI error on CLOSE TRACK SESSION: [3 73 04] Medium error. Program memory area update failure.
BraseroLibburn Async CLOSE TRACK SESSION failed after 7.1 seconds
BraseroLibburn Closing session
[b]BraseroLibburn Asynchronous SCSI error on CLOSE TRACK SESSION: [3 73 04] Medium error. Program memory area update failure.
BraseroLibburn Something went wrong
BraseroLibburn called brasero_job_error
BraseroLibburn finished with an error
BraseroLibburn asked to stop because of an error
	error		= 15
	message	= "Si è verificato un errore durante la scrittura su disco"
BraseroLibburn stopping
Session error : Si è verificato un errore durante la scrittura su disco (brasero_burn_record brasero-burn.c:2856[/b])
Avatar utente
maxbigsi
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 17039
Iscrizione: mercoledì 21 maggio 2008, 14:05
Desktop: Xfce
Distribuzione: MX Linux 23.2 64bit
Sesso: Maschile
Contatti:

Re: Creare DVD boot windows

Messaggio da maxbigsi »

W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
Avatar utente
Nooby
Prode Principiante
Messaggi: 26
Iscrizione: sabato 3 ottobre 2015, 16:49
Desktop: Unity
Distribuzione: Ubuntu 16.04 Xenial Xerus
Sesso: Maschile

Re: Creare DVD boot windows

Messaggio da Nooby »

Si pianta immediatamente e mi sputa il disco. Non sapevo comunque si potesse masterizzare da terminale....ti posto cosa mi dice il terminale:

Codice: Seleziona tutto

gabriele@gabriele-SATELLITE-C50D-A-12X:~/Scaricati$ wodim dev=/dev/sg1 driveropts=burnfree fs=14M speed=10 -dao -eject -overburn -v Win10_1511_1_Italian_x64.iso
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sg1'
devname: '/dev/sg1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.36
Wodim version: 1.1.11
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'TSSTcorp'
Identification : 'CDDVDW SU-208FB '
Revision       : 'TF01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 262144 = 256 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size      : 14680064 = 14336 KB
Track 01: data  4163 MB        
Total size:     4781 MB (473:42.10) = 2131658 sectors
Lout start:     4781 MB (473:44/08) = 2131658 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 166838
Speed set to 11080 KB/s
Starting to write CD/DVD at speed   8.0 in real SAO mode for single session.
Last chance to quit, starting real write in    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01:    0 of 4163 MB written.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 3E 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 73 04 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x73 Qual 0x04 (program memory area update failure) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.007s timeout 200s

write track data: error after 126976 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Writing  time:   30.203s
Average write speed 111.0x.
Fixating...
Fixating time:    0.003s
wodim: fifo had 225 puts and 3 gets.
wodim: fifo was 0 times empty and 1 times full, min fill was 99%.
Avatar utente
maxbigsi
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 17039
Iscrizione: mercoledì 21 maggio 2008, 14:05
Desktop: Xfce
Distribuzione: MX Linux 23.2 64bit
Sesso: Maschile
Contatti:

Re: Creare DVD boot windows

Messaggio da maxbigsi »

che marca sono i DVD? prova a cambiare marca :sisi:
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
Scrivi risposta

Ritorna a “Altre distribuzioni e sistemi operativi”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 8 ospiti