ho bisogno di (molto) aiuto: sto cercando di far funzionare il mio scanner HP Scanjet 4200C con ubuntu (5.10), ma sto incontrando parecchi problemi (+ che problemi insuccessi veri e propri)
premetto che ho conoscenze molto superficiali di Linux, dunque ho fatto molto riferimento a questa guida che tra l'altro cita anche lo scanner in questione: http://a2.pluto.it/uso_dello_scanner_con_sane.htm.
allora se digito
ecco il risultato:sane-find-scanner
mentre se digito# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x03f0, product=0x0105) at libusb:001:011
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
segue:scanimage -L
come dice la guida, nel file /etc/sane.d/dll.conf ho aggiunto la voce hp5400:libusb:001:011, dove hp5400 è il file (hp5400.conf) in cui sono specificati i valori vendor=0x03f0, product=0x0105 che identificano lo scanner.No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
fatto questo lancio xsane ma non c'è verso che rilevi lo scanner..
qualche idea/consiglio/aiuto? spero di sì!
ringrazio in anticipo..
Marco