[EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Riconoscimento, installazione e configurazione delle periferiche.
Scrivi risposta
Avatar utente
LUCARIO
Prode Principiante
Messaggi: 6
Iscrizione: lunedì 18 agosto 2008, 14:20
Località: Scerni

[EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da LUCARIO »

come si installa ubuntu su eeepc?

P.S.voglio risposte da italiani!!!
Ultima modifica di LUCARIO il lunedì 13 ottobre 2008, 15:02, modificato 1 volta in totale.
Immagine


Immagine
Avatar utente
simo91
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 2186
Iscrizione: venerdì 4 aprile 2008, 14:01
Località: Bologna
Contatti:

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da simo91 »

Arch Linux i686
Jabber, per chiunque: simo91@jabber.org - My blog
Avatar utente
robytrevi
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 10901
Iscrizione: lunedì 10 marzo 2008, 14:12
Desktop: mate
Distribuzione: Xenial 32 bit
Località: Modena(provincia)

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da robytrevi »

E c'è pure il wiki
Ubuntu 16.04 (Mate), Arch (Gnome-shell), Fedora21(gnome-shell), Debian Jessie(openbox), Windows 7 ; Dell Inspiron 1501; AMD Turion 64x2; ATI XPress 1100 (vista come Radeon Xpress 200M)
Quando si richiede supporto postare il comando "lsb_release -ds && echo $DESKTOP_SESSION && uname -m"
Avatar utente
overhill
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 698
Iscrizione: sabato 28 gennaio 2006, 18:37
Località: Torino
Contatti:

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da overhill »

Purtroppo non è così semplice: ho un eeepc 1000h e non installa un bel niente... :(
Parte l'installazione (la faccio mediante un lettore CD collegato via USB) mi chiede se voglio installare o usare il live, e in entrambi i casi, dopo avere installato il kernel (barra che avanza correttamente) diventa tutto nero e così rimane... ho aspettato dieci minuti, dovrebbero bastare penso, ma non si schioda da lì...
Ho provato a guardare nel Wiki, ma, almeno nelle sezioni italiana e inglese (le due lingue che conosco) non c'è nulla...

Qualcuno ha qualche idea sul perché si blocca? :))
Ciao a tutti
Mario Overhill
--------------------------------------------------------------------------------------
Avatar utente
overhill
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 698
Iscrizione: sabato 28 gennaio 2006, 18:37
Località: Torino
Contatti:

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da overhill »

Colpa mia colpa mia... :(

Il primo problema era il CD masterizzato male (chissà cosa aveva? Pazienza: l'ho riscaricato rimasterizzato rilanciato e ha iniziato l'installazione :) )

Il secondo problema è stato il partizionamento: il 1000H arriva con un disco da 160Gb partizionato in due dischi da 80Gb.
Come indicato nelle guide, si deve accendere il PC tenendo premuto "esc" ma non sempre funziona, allora mi capitava spesso (ma non volentieri) che partisse Windows. Lo chiudevo brutalmente per ricominciare e non aspettare il tutto e, dopo qualche smadonnamento, riuscivo finalmente a partire con l'installazione
Il problema nasceva quando partiva il gparted, perché volevo ridimensionare gli 80Gb di Windows, ma non c'era verso.
Finalmente, dopo un bel po' di analisi, ho "scoperto" che perché gparted riesca a ridimensionare un disco ntfs, questo deve essere smontato correttamente. Quindi ho fatto ripartire windows, ho lanciato chkdsk, tanto per sicurezza, e alla fine ho fatto ripartire senza la classica videata "windows non si è chiuso correttamente"...
Finalmente sono riuscito a partizionare come desideravo :)

A proposito: qualcuno sa cosa è quel device da 34 Mb contrassegnato come SDA4 (o 5)?
Ciao a tutti
Mario Overhill
--------------------------------------------------------------------------------------
Avatar utente
LUCARIO
Prode Principiante
Messaggi: 6
Iscrizione: lunedì 18 agosto 2008, 14:20
Località: Scerni

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da LUCARIO »

Immagine


Immagine
Avatar utente
Asterhex
Prode Principiante
Messaggi: 10
Iscrizione: domenica 25 ottobre 2009, 16:42
Contatti:

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da Asterhex »

overhill ha scritto:
A proposito: qualcuno sa cosa è quel device da 34 Mb contrassegnato come SDA4 (o 5)?
Dovrebbe essere la partizione di ripristino della configurazione di fabbrica.
Avatar utente
Incastro
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 353
Iscrizione: mercoledì 25 aprile 2007, 12:56
Località: Altrove

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da Incastro »

Da penna/chiave USB, invece?
Nel forum italiano ho trovato solamente thread, nei quali, tra l'altro, si parla di una vecchia Eeeubuntu.

Ho scritto troppo presto.

Semmai metto qualche link alla mia risposta.

Lo chiedevo, perché la guida che avevo visto non c'è più.
http://wiki.ubuntu-it.org/Installazione/DaSupportoUsb
Ultima modifica di Incastro il lunedì 16 novembre 2009, 1:06, modificato 1 volta in totale.
Linuci semper grave inhabilis. Sono un po' sconfortato dagli aggiornamenti, che invece di migliorare i software li peggiorano.
Una guida.... Dittatura_della_maggioranza; Il lettore. A voce alta: the Reader/Der Leser (da B. Schlink, Der Vorleser)
Avatar utente
robytrevi
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 10901
Iscrizione: lunedì 10 marzo 2008, 14:12
Desktop: mate
Distribuzione: Xenial 32 bit
Località: Modena(provincia)

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da robytrevi »

Puoi richiedere maggiori informazioni qui.
Qui per la live su supporto usb.
Ultima modifica di robytrevi il lunedì 16 novembre 2009, 12:05, modificato 1 volta in totale.
Ubuntu 16.04 (Mate), Arch (Gnome-shell), Fedora21(gnome-shell), Debian Jessie(openbox), Windows 7 ; Dell Inspiron 1501; AMD Turion 64x2; ATI XPress 1100 (vista come Radeon Xpress 200M)
Quando si richiede supporto postare il comando "lsb_release -ds && echo $DESKTOP_SESSION && uname -m"
Avatar utente
Incastro
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 353
Iscrizione: mercoledì 25 aprile 2007, 12:56
Località: Altrove

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da Incastro »

robytrevi ha scritto: Puoi richiedere maggiori informazioni qui.
Qui per la live su supporto usb.
Grazie, ma in realtà ci sarebbe addirittura la pagina ufficiale di Ubuntu.
https://help.ubuntu.com/community/Insta ... omUSBStick
Da mettere un po' a posto e tradurre.

Permette di installare Ubuntu quella che tu chiami live, insomma come fosse un CD?
Ultima modifica di Incastro il lunedì 16 novembre 2009, 13:30, modificato 1 volta in totale.
Linuci semper grave inhabilis. Sono un po' sconfortato dagli aggiornamenti, che invece di migliorare i software li peggiorano.
Una guida.... Dittatura_della_maggioranza; Il lettore. A voce alta: the Reader/Der Leser (da B. Schlink, Der Vorleser)
Avatar utente
dataghoul
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 319
Iscrizione: lunedì 25 maggio 2009, 7:11
Desktop: Gnome
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: fluttuante nella rete

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da dataghoul »

Incastro ha scritto:
Permette di installare Ubuntu quella che tu chiami live, insomma come fosse un CD?
si, esatto.

inoltre, in in genere, per mettere la distribuzione sulla penna USB utilizzo lìottimo software unetbootin, che è, IMHO, molto più semplice e rapido del metodo descritto nel wiki.
"Before you diagnose yourself with depression or low self-esteem, first make sure that you are not, in fact, simply surrounded by assholes."
(William Gibson)
Avatar utente
robytrevi
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 10901
Iscrizione: lunedì 10 marzo 2008, 14:12
Desktop: mate
Distribuzione: Xenial 32 bit
Località: Modena(provincia)

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da robytrevi »

Non mi sembra complicato andare in Sistema --> Amministrazione --> Creazione disco di avvio USB --> Scegliere l'ISO ed il supporto in cui installare la live..
Ubuntu 16.04 (Mate), Arch (Gnome-shell), Fedora21(gnome-shell), Debian Jessie(openbox), Windows 7 ; Dell Inspiron 1501; AMD Turion 64x2; ATI XPress 1100 (vista come Radeon Xpress 200M)
Quando si richiede supporto postare il comando "lsb_release -ds && echo $DESKTOP_SESSION && uname -m"
Avatar utente
Incastro
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 353
Iscrizione: mercoledì 25 aprile 2007, 12:56
Località: Altrove

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da Incastro »

robytrevi ha scritto: Non mi sembra complicato andare in Sistema --> Amministrazione --> Creazione disco di avvio USB --> Scegliere l'ISO ed il supporto in cui installare la live..
Parlavo di una installazione del sistema su hard disk, essendo solamente in possesso di quell'unico computerino.
Avendo un altro computer, è in effetti semplice.
Non lo è, ma si guardi la pagina da tradurre, allorché si possieda solamente l'EeePC.
Linuci semper grave inhabilis. Sono un po' sconfortato dagli aggiornamenti, che invece di migliorare i software li peggiorano.
Una guida.... Dittatura_della_maggioranza; Il lettore. A voce alta: the Reader/Der Leser (da B. Schlink, Der Vorleser)
Avatar utente
robytrevi
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 10901
Iscrizione: lunedì 10 marzo 2008, 14:12
Desktop: mate
Distribuzione: Xenial 32 bit
Località: Modena(provincia)

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da robytrevi »

Mi sa che non ho capito il problema.
Per poter avviare l'istallazione da usb devi aver "messo" ubuntu nella penna usb in modo persistente.
Una volta fatto, come suggerito precedentemente, o con unetbootin (che non ho mai provato), basta scegliere di avviare l'eeepc da usb. Parte così la live da usb come se fosse un cd e puoi usare la live o eseguire l'istallazione.
Ma se non hai il supporto usb con la live di ubuntu correttamente installata non vedo come tu possa fare l'installazione
Ubuntu 16.04 (Mate), Arch (Gnome-shell), Fedora21(gnome-shell), Debian Jessie(openbox), Windows 7 ; Dell Inspiron 1501; AMD Turion 64x2; ATI XPress 1100 (vista come Radeon Xpress 200M)
Quando si richiede supporto postare il comando "lsb_release -ds && echo $DESKTOP_SESSION && uname -m"
Avatar utente
Incastro
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 353
Iscrizione: mercoledì 25 aprile 2007, 12:56
Località: Altrove

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da Incastro »

robytrevi ha scritto: Mi sa che non ho capito il problema.
Per poter avviare l'istallazione da usb devi aver "messo" ubuntu nella penna usb in modo persistente.
Una volta fatto, come suggerito precedentemente, o con unetbootin (che non ho mai provato), basta scegliere di avviare l'eeepc da usb. Parte così la live da usb come se fosse un cd e puoi usare la live o eseguire l'istallazione.
Ma se non hai il supporto usb con la live di ubuntu correttamente installata non vedo come tu possa fare l'installazione
Potrebbe essere che sia io a non capire qualcosa (influenza che non vuole andarsene da due settimane e che, a quanto pare, un po' mi ha instupidito, portate pazienza e mi scuso).
No, perché sinora avevo interpretato quella pagina come contente le indicazioni per portarsi a giro Ubu, non come strumento di installazione.

Dici che installando su USB, da lì posso installare su hard disk, usando la penna come fosse un CD?
Basterebbe anche la classica iconcina "installa".
Ultima modifica di Incastro il lunedì 16 novembre 2009, 16:59, modificato 1 volta in totale.
Linuci semper grave inhabilis. Sono un po' sconfortato dagli aggiornamenti, che invece di migliorare i software li peggiorano.
Una guida.... Dittatura_della_maggioranza; Il lettore. A voce alta: the Reader/Der Leser (da B. Schlink, Der Vorleser)
Avatar utente
robytrevi
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 10901
Iscrizione: lunedì 10 marzo 2008, 14:12
Desktop: mate
Distribuzione: Xenial 32 bit
Località: Modena(provincia)

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da robytrevi »

Si, esatto. Puoi usare la live su usb come livecd
Ubuntu 16.04 (Mate), Arch (Gnome-shell), Fedora21(gnome-shell), Debian Jessie(openbox), Windows 7 ; Dell Inspiron 1501; AMD Turion 64x2; ATI XPress 1100 (vista come Radeon Xpress 200M)
Quando si richiede supporto postare il comando "lsb_release -ds && echo $DESKTOP_SESSION && uname -m"
Avatar utente
Incastro
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 353
Iscrizione: mercoledì 25 aprile 2007, 12:56
Località: Altrove

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da Incastro »

robytrevi ha scritto: Si, esatto. Puoi usare la live su usb come livecd
Bene, grazie. ;D

Proverò Ubu, la 9.10, e poi dirò pure qui, ma dovrebbe andare tutto bene, penso e confido, considerato che ho comprato un 1005 HA e ho visto che qui, in italiano, esiste per l'appunto il thread Asus Eee PC 1005 HA + Ubuntu 9.04 - Problemi ethernet e wireless.

https://help.ubuntu.com/community/Insta ... omUSBStick
Avrei già cominciato a tradurre questa pagina; che ne dite se ne finisco la traduzione?
Non prometto velocità di esecuzione, però. ;) :)

Adesso la pagina è in questo modo:
   * Installation
   * FromUSBStick

Indice

  1. Known Issues
  2. Gather Prerequisites
        1. Installation Type
        2. Computer used to make USB disk
  3. Acquire (k/x/media)Ubuntu ISO
  4. Copy files to USB stick
        1. ISO to USB Stick USB-creator Method
        2. From Linux
        3. From Windows
  5. Boot the Computer From USB
        1. 9.04 and before .img for netbook
  6. Prepare the USB Drive
  7. Being moved

This page gives instructions on how to run Ubuntu from a USB flash drive for installation or other purposes. This may be necessary for netbooks and other computers without CD drives and is handy for others because the thumb drive is so easy to use. The Ubuntu 9.10 CD/DVD ISO images come with the necessary Windows and Linux utilities to get the system on a thumb-drive.

For Custom, manual, older versions, and technical instructions and troubleshooting see: USB Installation Media. There are also network installation options available. You can also see the instructions for USB drives from the official Install Guide.

Known Issues

9.10 netbook remix does not bring up broadcom wifi automatically, one will have to install it, then navigate the USB drive to pool and install a few packages manually with dpkg to get networking up. https://bugs.launchpad.net/ubuntu/+sour ... bug/449268

If you just get a black screen when booting from USB, using the setting "Discarded on shutdown, unless you save them elsewhere" in usb-creator might help. http://forum.eeeuser.com/viewtopic.php?pid=658619
Gather Prerequisites

Installation Type

Netbook Remix

   * 1GB thumbdrive with everything backed up elsewhere
   * iso image file, or cd and another computer ubuntu-netbook-remix iso, or kubuntu-netbook iso, or
   * Optional, large capacity SD card for storing ISO and or backing up data

Desktop or Server

   * 2GB thumbdrive, or just do network install

Computer used to make USB disk

Windows

   * Virtual Clone Drive, or other iso reading software or CD burner and blank disk, (or disk)
   * what level access to a computer?
   * usb-creator.exe comes with the .iso

Linux

   * usb-creator (sudo apt-get install usb-creator)
   * administrator priviledges on computer used to set up thumb drive

Acquire (k/x/media)Ubuntu ISO

netbook / 32bit / 64bit, kubuntu, etc See ... (presumably you know what kind you want). Disk from friend, download, order one.. etc.

Copy files to USB stick

ISO to USB Stick USB-creator Method

From Linux

   * The utility: usb-creator can be installed normal way with apt if not allready present on your system
   * run usb-creator
   * Top Pane, You will have to click "other", locate and select the .iso image
   * Plug the- to-be-nuked- USB thumb drive into the computer, it should show up in the bottom pane.
   * You will probably have to click format, make sure you have the right device!
   * There are bugs with the formatting, It may show up as two partitions, try selecting each of them (sdb sdb1 on mine, but this changes), one should work, if not restart the computer and try again.

If you get a DBus error with USB creator: this bug report maybe helpful: https://bugs.launchpad.net/ubuntu/+sour ... bug/458334

From Windows

burn the iso file or use use virtual clone drive to access the files within the image.

usb-creator.exe is located in the CD image. Does not exist on the 9.10 i386 image.

You won't be able to select the USB drive if it wasn't formatted in a way that windows can see it. You may have to format it using explorer, then it will show up in the creator tool

Alternatively you can use Unetbootin to create a bootable usb drive. http://unetbootin.sourceforge.net/

Boot the Computer From USB

Most newer computers can boot from USB, You will have to go to the bios, and put either removable drives, or USB media before the hard drive. This is computer dependant, and it also depends on which way the USB drive was formatted, on a Dell Mini 9, it may show up as either, so it may make sense to review settings again.

9.04 and before .img for netbook

If you have downloaded a .img file, please refer to the .img writing documentation

Prepare the USB Drive

   * check the usb drive for files and back them up if needed, all contents will be destroyed.
   * 1gb minimum for netbook, may be higher for other types.
   * The windows utility won't let you select the usb drive if the drive isn't properly formatted and mounted. Booting from a USB drive created with this utility will behave just as if you had booted from the install CD. It will show the language selection and then the install menu, from which you can install Ubuntu onto the computer's hard drive or launch the LiveCD environment.

Linux

The Ubuntu USB desktop image creator is available in the package usb-creator, usb-creator-kde on Kubuntu, or usb-creator-gtk on 9.10.

From the 8.10 release on (9.10 on for Kubuntu), Ubuntu includes the usb-creator by default on all live CDs and installations.

You can find it in System-->Administration-->Create a USB startup disk (Ubuntu Desktop) or K-Menu-->Applications-->System-->USB Startup Disk Creator (Kubuntu), if it is not there then as normal run the following command in the terminal :

sudo apt-get install usb-creator

Make sure the software-sources are activated if you are on a live cd (software sources or sudo gedit /etc/apt/sources.list). You may need to install the python-gnome2 package as well.

It should do everything needed you just need to have a live cd in you CD-Rom or show the usb-creator the ISO image of it and the rest of the process is automatic! (for more info how to use this tool directly by just popping in a liveCD to a Drive in a running Ubuntu desktop see also "Live USB creator" below, note that it also works directly with downloaded .iso images)

If the progress bar proceeds very slowly (1% every 10 seconds or so) you may want to make sure your usb stick is mounted without the "sync" option. This seems to work around single-byte writes bug in Jaunty's usb-creator.

https://wiki.kubuntu.org/Kubuntu/Netboo ... reator.png

Windows

This method is recommended if you are creating Linux installation to coexist with your existing Windows installation.

   * Find a usb-creator app and run it

Being moved

The mainstream method for 9.10 is using ISO cd images and usb-creator. The process can be outlined in four steps:

   * Acquire the right Ubuntu installation files and tools
   * Get Ubuntu onto your USB Flash Drive
   * Configure your computer to boot from USB Drive and boot from it
   * Install Ubuntu -- works like normal

CategoryLive CategoryInstallation CategoryInstallation CategoryInstallation

Installation/FromUSBStick (l'ultima modifica è del 2009-11-16 18:56:54, fatta da Daniel cardenas)
Ultima modifica di Incastro il lunedì 16 novembre 2009, 22:53, modificato 1 volta in totale.
Linuci semper grave inhabilis. Sono un po' sconfortato dagli aggiornamenti, che invece di migliorare i software li peggiorano.
Una guida.... Dittatura_della_maggioranza; Il lettore. A voce alta: the Reader/Der Leser (da B. Schlink, Der Vorleser)
Avatar utente
Incastro
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 353
Iscrizione: mercoledì 25 aprile 2007, 12:56
Località: Altrove

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da Incastro »

Attendo una risposta...
Linuci semper grave inhabilis. Sono un po' sconfortato dagli aggiornamenti, che invece di migliorare i software li peggiorano.
Una guida.... Dittatura_della_maggioranza; Il lettore. A voce alta: the Reader/Der Leser (da B. Schlink, Der Vorleser)
Avatar utente
Incastro
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 353
Iscrizione: mercoledì 25 aprile 2007, 12:56
Località: Altrove

Re: [EEEPC] [Ubuntu] come si installa ubuntu su eeepc?

Messaggio da Incastro »

Incastro ha scritto: Attendo una risposta...
Bene, ne prendo atto.
Linuci semper grave inhabilis. Sono un po' sconfortato dagli aggiornamenti, che invece di migliorare i software li peggiorano.
Una guida.... Dittatura_della_maggioranza; Il lettore. A voce alta: the Reader/Der Leser (da B. Schlink, Der Vorleser)
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Google [Bot] e 20 ospiti