aiutooooo!!!!!chiavetta vodafone k3765

[stesimo]

vi chiedo gentilmente un aiuto.sono a conoscienza che l'argomento è stato più volte trattato ,ma ho guardato tutti i post,ma non riesco a risolvere: non mi riconosce la chiave,ho provato da diversi link o direttamente su beta..... sia modem swich che m.s.+data ,ozerocdoff,vodafone-mobile,ma mi dà il seguente errore"nonpuò essere aperto poichè l'applicazione asociata non esiste .modificare l'associazione delle opzione" cosa devo fare ? grazie in anticipo.

[maurotec]

ciao stesimo

Applicazioni/accessori/terminale

poi

Codice: Seleziona tutto

lsusb

e posti

[stesimo]

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 12d1:1465 Huawei Technologies Co., Ltd.
Bus 001 Device 002: ID 046d:0896 Logitech, Inc. OrbiCam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[maurotec]

che versione di unbutu hai?

per karmic 9.10
da terminale scrivi

Codice: Seleziona tutto

sudo gedit /lib/udev/rules.d/61-option-modem-modeswitch.rules

ed inserisci la seguente riga alla fine del file prima della riga "LABEL="option_zerocd_end"":

Codice: Seleziona tutto

ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1465", RUN+="modem-modeswitch -v 0x%s{idVendor} -p 0x%s{idProduct} -t option-zerocd"


salva il file e prova ad estrarre e ad reinserire la chiavetta

dovrebbe creare i node device in dev, se li ha creati lo vedi con

Codice: Seleziona tutto

ls -l /dev/ttyU*

[stesimo]

ho provato,ma non succede nulla.

[stesimo]

ho provato anche ad inserire  :sudo apt-get install usb-modemswitch-data, ma dice impossibile trovare il pacchetto.

[maurotec]

ok, prova a dare :

Codice: Seleziona tutto

cat /var/log/syslog

comunque controlla di avere scritto correttamente, perchè dovrebbe funzionare.

[lullismile]

salve, anche io ho lo stesso problema :'(
essendo completamente ignorante in materia mi sono persa al primo passaggio....help :-[
Jun 11 14:54:12 claudio-laptop syslogd 1.5.0#5ubuntu3: restart.
Jun 11 14:54:12 claudio-laptop anacron[2694]: Job `cron.daily' terminated
Jun 11 14:54:12 claudio-laptop anacron[2694]: Job `cron.weekly' started
Jun 11 14:54:12 claudio-laptop anacron[4208]: Updated timestamp for job `cron.weekly' to 2010-06-11
Jun 11 14:54:15 claudio-laptop syslogd 1.5.0#5ubuntu3: restart.
Jun 11 14:54:15 claudio-laptop anacron[2694]: Job `cron.weekly' terminated
Jun 11 14:54:15 claudio-laptop anacron[2694]: Normal exit (2 jobs run)
Jun 11 15:00:01 claudio-laptop /USR/SBIN/CRON[4453]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd hourly 2>/dev/null)
Jun 11 15:00:01 claudio-laptop /USR/SBIN/CRON[4452]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Jun 11 15:10:01 claudio-laptop /USR/SBIN/CRON[4703]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Jun 11 15:17:01 claudio-laptop /USR/SBIN/CRON[4867]: (root) CMD (  cd / && run-parts --report /etc/cron.hourly)
Jun 11 15:20:01 claudio-laptop /USR/SBIN/CRON[4985]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Jun 11 15:30:01 claudio-laptop /USR/SBIN/CRON[5171]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Jun 11 15:30:49 claudio-laptop kernel: [ 3591.109125] ACPI: EC: missing confirmations, switch off interrupt mode.
Jun 11 15:30:50 claudio-laptop kernel: [ 3591.608126] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080926]
Jun 11 15:30:50 claudio-laptop kernel: [ 3591.608168] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0.LPC_.BAT0._BST] (Node f6c17f48), AE_TIME
Jun 11 15:30:50 claudio-laptop kernel: [ 3591.608375] ACPI Exception (battery-0359): AE_TIME, Evaluating _BST [20080926]
Jun 11 15:32:24 claudio-laptop kernel: [ 3685.956186] usb 1-4: new high speed USB device using ehci_hcd and address 3
Jun 11 15:32:24 claudio-laptop kernel: [ 3686.193352] usb 1-4: configuration #1 chosen from 1 choice
Jun 11 15:32:24 claudio-laptop kernel: [ 3686.292987] usbcore: registered new interface driver hiddev
Jun 11 15:32:24 claudio-laptop kernel: [ 3686.322049] generic-usb 0003:19D2:F006.0001: hiddev96,hidraw0: USB HID v1.10 Device [ZTE, Incorporated ZTE CDMA Technologies MSM] on usb-0000:00:1d.7-4/input0
Jun 11 15:32:24 claudio-laptop kernel: [ 3686.322121] usbcore: registered new interface driver usbhid
Jun 11 15:32:24 claudio-laptop kernel: [ 3686.322136] usbhid: v2.6:USB HID core driver
Jun 11 15:32:26 claudio-laptop kernel: [ 3687.750609] usb 1-4: USB disconnect, address 3
Jun 11 15:32:30 claudio-laptop kernel: [ 3692.260203] usb 1-4: new high speed USB device using ehci_hcd and address 4
Jun 11 15:32:31 claudio-laptop kernel: [ 3692.810460] usb 1-4: configuration #1 chosen from 1 choice
Jun 11 15:32:31 claudio-laptop kernel: [ 3692.867429] Initializing USB Mass Storage driver...
Jun 11 15:32:31 claudio-laptop kernel: [ 3692.872693] usb-storage: device ignored
Jun 11 15:32:31 claudio-laptop kernel: [ 3692.872882] usbcore: registered new interface driver usb-storage
Jun 11 15:32:31 claudio-laptop kernel: [ 3692.872903] USB Mass Storage support registered.
Jun 11 15:36:40 claudio-laptop kernel: [ 3942.194241] usb 1-4: USB disconnect, address 4
Jun 11 15:40:01 claudio-laptop /USR/SBIN/CRON[5420]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Jun 11 15:50:01 claudio-laptop /USR/SBIN/CRON[5639]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Jun 11 16:00:01 claudio-laptop /USR/SBIN/CRON[5837]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd hourly 2>/dev/null)
Jun 11 16:00:01 claudio-laptop /USR/SBIN/CRON[5838]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Jun 11 16:09:49 claudio-laptop kernel: [ 5930.696171] usb 1-3: new high speed USB device using ehci_hcd and address 5
Jun 11 16:09:49 claudio-laptop kernel: [ 5930.933496] usb 1-3: configuration #1 chosen from 1 choice
Jun 11 16:09:49 claudio-laptop kernel: [ 5930.990063] generic-usb 0003:19D2:F006.0002: hiddev96,hidraw0: USB HID v1.10 Device [ZTE, Incorporated ZTE CDMA Technologies MSM] on usb-0000:00:1d.7-3/input0
Jun 11 16:09:51 claudio-laptop kernel: [ 5932.490925] usb 1-3: USB disconnect, address 5
Jun 11 16:09:55 claudio-laptop kernel: [ 5936.980120] usb 1-3: new high speed USB device using ehci_hcd and address 6
Jun 11 16:09:56 claudio-laptop kernel: [ 5937.530497] usb 1-3: configuration #1 chosen from 1 choice
Jun 11 16:09:56 claudio-laptop kernel: [ 5937.544270] usb-storage: device ignored
Jun 11 16:10:01 claudio-laptop /USR/SBIN/CRON[6144]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
claudio@claudio-laptop:~$ egistered.
bash: egistered.: comando non trovato
claudio@claudio-laptop:~$ Jun 11 15:36:40 claudio-laptop kernel: [ 3942.194241] usb 1-4: USB disconnect, address 4
bash: Jun: comando non trovato
claudio@claudio-laptop:~$ Jun 11 15:40:01 claudio-laptop /USR/SBIN/CRON[5420]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
bash: errore di sintassi vicino il simbolo non atteso "("
claudio@claudio-laptop:~$ Jun 11 15:50:01 claudio-laptop /USR/SBIN/CRON[5639]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
bash: errore di sintassi vicino il simbolo non atteso "("
claudio@claudio-laptop:~$ Jun 11 16:00:01 claudio-laptop /USR/SBIN/CRON[5837]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd hourly 2>/dev/null)
bash: errore di sintassi vicino il simbolo non atteso "("
claudio@claudio-laptop:~$ Jun 11 16:00:01 claudio-laptop /USR/SBIN/CRON[5838]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
bash: errore di sintassi vicino il simbolo non atteso "("
claudio@claudio-laptop:~$ Jun 11 16:09:49 claudio-laptop kernel: [ 5930.696171] usb 1-3: new high speed USB device using ehci_hcd and address 5
bash: Jun: comando non trovato

[maurotec]

Stesimo il programma si chiama usb-modeswitch e non usb-modem swicth la "m" non c'è.
quindi :

Codice: Seleziona tutto

sudo apt-get install usb-modeswitch

questo programma dovrebbe commutare la k3765,  vedi http://www.draisberghof.de/usb_modeswitch/usb_modeswitch.setup

Codice: Seleziona tutto

########################################################
# Huawei K3765
#
# Contributor: Felix Schwarz

;DefaultVendor=  0x12d1
;DefaultProduct= 0x1520

;TargetVendor=   0x12d1
;TargetProduct=  0x1465

;MessageContent="55534243123456780000000000000011060000000000000000000000000000"

Comunque, se non commutasse, il comando lsusb dovrebbe mostrarti ID 12d1:1520, invece di ID 12d1:1465.

però se con

Codice: Seleziona tutto

mauro@mauro-desktop:~$ ls -l /dev/ttyU*
crw-rw---- 1 root dialout 188, 0 2010-06-12 14:30 /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 1 2010-06-12 14:30 /dev/ttyUSB1
crw-rw---- 1 root dialout 188, 2 2010-06-12 14:25 /dev/ttyUSB2


non ti mostra i device prova ad installare usb-modeswitch.