[Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
per vlc la cosa fondamentale è che sia la versione del repository che ho scritto e NON un altra altrimenti non andrà l'accelerazione( quella versione infatti è stato sostituito il path di alcune librerie). che non ti legge più niente è molto strano perchè vlc ha tutto al suo interno. prova dai il comando vlc da terminale e vedi cosa esce. ah dimenticavo che versione di ubuntu hai?
[Guida] accelerare video hd h264 wmv9 con ati 4xxx 5xxx series (smplayer xbmc vlc)
http://forum.ubuntu-it.org/viewtopic.php?t=401372
http://forum.ubuntu-it.org/viewtopic.php?t=401372
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
Vlc ho scaricato la versione che c'era indicata nel link cmq dando vlc a terminale esce:
VLC media player 1.1.9 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
[0x1c81910] main libvlc: Esecuzione di vlc con l'interfaccia predefinita. Usa 'cvlc' per utilizzare vlc senza interfaccia.
Blocked: call to setlocale(6, "")
Warning: call to srand(1303874200)
Warning: call to rand()
Blocked: call to setlocale(6, "")
(process:2093): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
per il resto come faccio a ripristinare i codec? grazie per l'aiuto
VLC media player 1.1.9 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
[0x1c81910] main libvlc: Esecuzione di vlc con l'interfaccia predefinita. Usa 'cvlc' per utilizzare vlc senza interfaccia.
Blocked: call to setlocale(6, "")
Warning: call to srand(1303874200)
Warning: call to rand()
Blocked: call to setlocale(6, "")
(process:2093): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
per il resto come faccio a ripristinare i codec? grazie per l'aiuto
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
ho dimenticato di dirti che dopo aver dato il comando vlc di provare ad aprire un video >:(
[Guida] accelerare video hd h264 wmv9 con ati 4xxx 5xxx series (smplayer xbmc vlc)
http://forum.ubuntu-it.org/viewtopic.php?t=401372
http://forum.ubuntu-it.org/viewtopic.php?t=401372
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
[0x11d43a0] main decoder error: possibly corrupt module cache
[0x11d43a0] main decoder error: no suitable decoder module for fourcc `mp4v'. VLC probably does not support this sound or video format.
adesso come adesso mi interesserebbe di più ripristinare i codec per l'accelerazione video a questo punto ci rinuncio :-\
[0x11d43a0] main decoder error: no suitable decoder module for fourcc `mp4v'. VLC probably does not support this sound or video format.
adesso come adesso mi interesserebbe di più ripristinare i codec per l'accelerazione video a questo punto ci rinuncio :-\
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
be puoi provare a reinstallare vlc e le sue dipendenze e riprova. se non funziona neancora da gestore pacchetti forza la versione più vecchia (quella della tua distribuzione) e se funziona bloccala che almeno gestore aggiornamenti non ti chiede sempre l'aggiornamento
[Guida] accelerare video hd h264 wmv9 con ati 4xxx 5xxx series (smplayer xbmc vlc)
http://forum.ubuntu-it.org/viewtopic.php?t=401372
http://forum.ubuntu-it.org/viewtopic.php?t=401372
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
per chi ha nvidia invece,come si fa a usare l'accellerazione con i video hd?
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
è un pò più facile devi avere un nvidia >8xxx salvo qualche piccola eccezione cmq per non andare troppo (ot) non hai trovato niente sul forum? non avendo nvidia non ho l'hardwre per l prova però è più semplice se installi vlc su ubuntu e il pacchetto vdpau-va-driver dovrebbe già funzionare attivandolo l'accelerazione gpu in ingresso e codificatori dei settaggi
[Guida] accelerare video hd h264 wmv9 con ati 4xxx 5xxx series (smplayer xbmc vlc)
http://forum.ubuntu-it.org/viewtopic.php?t=401372
http://forum.ubuntu-it.org/viewtopic.php?t=401372
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
come faccio a disinstallare vlc? non ce l'ho sul gestore pacchetti... e per reinstallare i codec normalmente e far andare anche totem? :-\
edit... ok con vlc sembra andare (accelerazione GPU a parte) anche se prima mi leggeva anche gli flv e adesso niente.. però rimane il problema di ripristinare i codec di ubuntu... >:(
edit... ok con vlc sembra andare (accelerazione GPU a parte) anche se prima mi leggeva anche gli flv e adesso niente.. però rimane il problema di ripristinare i codec di ubuntu... >:(
Ultima modifica di ermy sti il giovedì 5 maggio 2011, 0:18, modificato 1 volta in totale.
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
Salve a tutti ho una HD4350,ho installato vlc e tutti i pacchetti seguendo la guida,come devo fare a rendere selezionabile la spunta "Usa accellerazione GPU"?
Come devo fare,perchè per leggere i video AVCHD devo per forza usare Windows.
Come devo fare,perchè per leggere i video AVCHD devo per forza usare Windows.
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
Ho appena aggiornato i driver secondo la guida ed ora tutti i video compresi quelli di youtube mi si vedono supervelocizzati e salatano i fotogrammi. come mai ? cosa può essere e come posso risolvere ? poi gentilmente sapreste dirmi come faccio per vedere se i driver sono correttamente installati e se l'accelerazione hardware è attiva. grazie
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
Ora vedo quelli in hd ma mi scattano quelli normali !
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
ti avevo mandato un messaggio privato non ti è arrivato? per i codec di ubuntu intendi totem? se si dovresri vedere se per caso nel seguire la mia guida ti ha disinstallato i codec di gstreamer anche se mi sembra molto strano controlla magari nella cronologia di ubuntu software center. cmq che ubuntu usi?ermy sti ha scritto: come faccio a disinstallare vlc? non ce l'ho sul gestore pacchetti... e per reinstallare i codec normalmente e far andare anche totem? :-\
edit... ok con vlc sembra andare (accelerazione GPU a parte) anche se prima mi leggeva anche gli flv e adesso niente.. però rimane il problema di ripristinare i codec di ubuntu... >:(
ciao anche per te stessa domanda che versione di ubuntu usi? se dai il comando vainfo non da errori?Blutz ha scritto: Salve a tutti ho una HD4350,ho installato vlc e tutti i pacchetti seguendo la guida,come devo fare a rendere selezionabile la spunta "Usa accellerazione GPU"?
Come devo fare,perchè per leggere i video AVCHD devo per forza usare Windows.
youtube? non capisco come può essere collegato il problema visto che utilizza flash player. per i video invece cle lettore utilizzi? vlc pure tu?asso87 ha scritto: Ho appena aggiornato i driver secondo la guida ed ora tutti i video compresi quelli di youtube mi si vedono supervelocizzati e salatano i fotogrammi. come mai ? cosa può essere e come posso risolvere ? poi gentilmente sapreste dirmi come faccio per vedere se i driver sono correttamente installati e se l'accelerazione hardware è attiva. grazie
Ultima modifica di marcobh5 il lunedì 9 maggio 2011, 20:52, modificato 1 volta in totale.
[Guida] accelerare video hd h264 wmv9 con ati 4xxx 5xxx series (smplayer xbmc vlc)
http://forum.ubuntu-it.org/viewtopic.php?t=401372
http://forum.ubuntu-it.org/viewtopic.php?t=401372
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
Ti scattano solo con vlc? se si usa mplayer x il resto e vlc x i full hd come faccio ioasso87 ha scritto: Ora vedo quelli in hd ma mi scattano quelli normali !
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
ragazzi mi aiutate a riabilitare i codec di ubuntu 10.04 64bit? :'(
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
Sto provando ad installare mplayer, mi dice così: david@david-desktop:~/mplayer-vaapi-20110127$ ./checkout-patch-build.sh
./checkout-patch-build.sh: 86: svn: not found
./checkout-patch-build.sh: 86: svn: not found
./checkout-patch-build.sh: 86: svn: not found
./checkout-patch-build.sh: 86: svn: not found
./checkout-patch-build.sh: 86: svn: not found
[: 86: -ne: unexpected operator
./checkout-patch-build.sh: 86: svn: not found
[: 86: -ne: unexpected operator
./checkout-patch-build.sh: 86: svn: not found
[: 86: -ne: unexpected operator
./checkout-patch-build.sh: 86: svn: not found
[: 86: -ne: unexpected operator
patching file Makefile
Reversed (or previously applied) patch detected! Assume -R? [n]
che devo fare ?
./checkout-patch-build.sh: 86: svn: not found
./checkout-patch-build.sh: 86: svn: not found
./checkout-patch-build.sh: 86: svn: not found
./checkout-patch-build.sh: 86: svn: not found
./checkout-patch-build.sh: 86: svn: not found
[: 86: -ne: unexpected operator
./checkout-patch-build.sh: 86: svn: not found
[: 86: -ne: unexpected operator
./checkout-patch-build.sh: 86: svn: not found
[: 86: -ne: unexpected operator
./checkout-patch-build.sh: 86: svn: not found
[: 86: -ne: unexpected operator
patching file Makefile
Reversed (or previously applied) patch detected! Assume -R? [n]
che devo fare ?
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
Ok sono riuscito ad installare smplayer secondo la guida ho impostato tutto come descritto , apro un file video ma non si vede nulla, neanche lo schermo nero, il file va avanti ma non si apre nessun video. cosa può essere ? Il video si sente benissimo ma non si vede nulla. Cosa devo fare ?
Ultima modifica di asso87 il giovedì 12 maggio 2011, 23:29, modificato 1 volta in totale.
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
up. E' quasi un mese che ho comprato questo computer ed ancora non sono riuscito a vedermi neanche un film
Re: [Guida] accelerare video hd con ati 4xxx 5xxx series (smplayer, xbmc e vlc )
ecco l'errore di vlc invece : david@david-desktop:~$ vlc
VLC media player 1.1.9 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
[0x11a5120] main libvlc: Esecuzione di vlc con l'interfaccia predefinita. Usa 'cvlc' per utilizzare vlc senza interfaccia.
Blocked: call to setlocale(6, "")
Warning: call to srand(1305210077)
Warning: call to rand()
Blocked: call to setlocale(6, "")
(process:2859): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
[0x1812f70] mkv demux error: cannot load some cues/chapters/tags etc. (broken seekhead or file)
[0x1812f70] mkv demux error: cannot load some cues/chapters/tags etc. (broken seekhead or file)
[0x17496b0] dts decoder: DTS channels:6 samplerate:48000 bitrate:1536000
libva: libva version 0.32.0
Xlib: extension "XFree86-DRI" missing on display ":0".
libva: va_getDriverName() returns 0
Errore di segmentazione
david@david-desktop:~$
non apro nessun video!
VLC media player 1.1.9 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
[0x11a5120] main libvlc: Esecuzione di vlc con l'interfaccia predefinita. Usa 'cvlc' per utilizzare vlc senza interfaccia.
Blocked: call to setlocale(6, "")
Warning: call to srand(1305210077)
Warning: call to rand()
Blocked: call to setlocale(6, "")
(process:2859): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
[0x1812f70] mkv demux error: cannot load some cues/chapters/tags etc. (broken seekhead or file)
[0x1812f70] mkv demux error: cannot load some cues/chapters/tags etc. (broken seekhead or file)
[0x17496b0] dts decoder: DTS channels:6 samplerate:48000 bitrate:1536000
libva: libva version 0.32.0
Xlib: extension "XFree86-DRI" missing on display ":0".
libva: va_getDriverName() returns 0
Errore di segmentazione
david@david-desktop:~$
non apro nessun video!
Chi c’è in linea
Visualizzano questa sezione: dandas e 23 ospiti