[Risolto] Problemi con chiavetta wi fi asus wl-167g v3

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

[Risolto] Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Ciao a tutti.
Ho questo notebook con 256 mb di ram in cui ho installato ubuntu 10.04  .
Come tutti ho trovato in google la chiavetta wifi asus wl-167g v3 che viene descritta come compatibile con vari os linux tra cui anche ubuntu.
Mi arriva la chiavetta wi fi ed è corredata da cd contente il software per linux.
Infilo la chiavetta e non funziona.
Cerco un po' in internet e comincio a disinstallare network manager ed installo wicd ma ancora non trova connessioni wireless.
Cerco ancora in internet e trovo queste due pagine:
http://forum.ubuntu-it.org/viewtopic.php?t=438363
e
http://samiux.blogspot.com/2010/05/howt ... ongle.html

Quindi dopo aver letto tutto scarico i nuovi files aggiornati del driver, imparo ad usare il terminale, imparo a modificare e a salvare i files dal terminale e dopo molta pazienza riesco ad eseguire entrambe le procedure delle due pagine descritte sopra senza inconvenienti e senza errori.

Malgrado ciò ancora adesso non viene visualizzata alcuna connessione wireless anche se ho installato i driver e tutto dovrebbe funzionare bene.

Cosa posso fare per risolvere e riuscire a connettermi via wireless con questa chiavetta?
Grazie
Ultima modifica di escort il venerdì 30 marzo 2012, 8:22, modificato 1 volta in totale.
Avatar utente
gnomo56
Rampante Reduce
Rampante Reduce
Messaggi: 6495
Iscrizione: lunedì 11 dicembre 2006, 19:07
Distribuzione: 13.04
Località: Milano
Contatti:

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da gnomo56 »

Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Ciao gnomo56, grazie per la tua risposta.

Ho guardato la pagina che suggerisci e vista la mia chiavetta l'unica pagina con probabile soluzione potrebbe essere questa:
http://www.lffl.org/2010/05/risolviamo- ... vette.html
considerato che io ho come os ubuntu 10.04 lucid lynx .

Bene, ho cominciato la procedura ma quando arrivo al comando:

sudo rmmod usb-storage

il terminale mi restituisce questo errore:

ERROR: Module usb_storage does not exist in /proc/modules

Come posso continuare?

Grazie
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

???
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
Messaggi: 24884
Iscrizione: mercoledì 17 marzo 2010, 17:44
Desktop: ubuntu
Distribuzione: Ubuntu 22.04.3 LTS x86_64
Sesso: Maschile
Località: Pisa

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da magozurlinux »

Da terminale colla chiavetta Asus inserita postami questi comandi:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | grep usb
Ubuntu 22.04 LTS Desktop :ciao:
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Ciao magozurlinux,
ho risolto in questo modo:
ho dato questo comando:

Codice: Seleziona tutto

sudo modprobe usbserial vendor=0x12d1 product=0x140c
ho scritto i dati della mia chiavetta
ho disinstallato wicd
ho reinstallato network manager
ho scritto i dati di accesso alla connessione wireless nella maschera di network manager
ho spento e riacceso il notebook ed ora la connessione è partita-

Ora il problema è un altro, ovvero che dopo 20 minuti si disconnette la connessione wireless e per farla riconnettere devo per forza  riavviare il computer.

Devo aprire una nuova discussione o continuo con questa?
Grazie
Ultima modifica di escort il venerdì 16 marzo 2012, 18:37, modificato 1 volta in totale.
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
Messaggi: 24884
Iscrizione: mercoledì 17 marzo 2010, 17:44
Desktop: ubuntu
Distribuzione: Ubuntu 22.04.3 LTS x86_64
Sesso: Maschile
Località: Pisa

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da magozurlinux »

Prego, di nulla.

Continua con questa discussione, postami il comando che ti avevo chiesto nel precedente messaggio, mi serve per vedere se c'è qualcosa che non va.
Ubuntu 22.04 LTS Desktop :ciao:
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Questi i risultati mentre la connessione wireless funziona:

Codice: Seleziona tutto

chrome@ubuntu:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0b05:1791 ASUSTek Computer, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Codice: Seleziona tutto

chrome@ubuntu:~$ dmesg | grep usb
[    0.075027] usbcore: registered new interface driver usbfs
[    0.075046] usbcore: registered new interface driver hub
[    0.075092] usbcore: registered new device driver usb
[    0.264248] usb usb1: configuration #1 chosen from 1 choice
[    0.265023] usb usb2: configuration #1 chosen from 1 choice
[    0.265409] usb usb3: configuration #1 chosen from 1 choice
[    0.268704] usb usb4: configuration #1 chosen from 1 choice
[    0.616086] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    0.795005] usb 1-1: configuration #1 chosen from 1 choice
[   23.457555] 8712_usb_endpoint_descriptor(0):
[   23.457569] 8712_usb_endpoint_descriptor(1):
[   23.457582] 8712_usb_endpoint_descriptor(2):
[   23.457594] 8712_usb_endpoint_descriptor(3):
[   23.983859] usbcore: registered new interface driver r871x_usb_drv
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Questi i risultati quando si disconnette la connessione wireless e ora sono con la connessione ethernet (con cavo):

Codice: Seleziona tutto

chrome@ubuntu:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Codice: Seleziona tutto

chrome@ubuntu:~$ dmesg | grep usb
[    0.075027] usbcore: registered new interface driver usbfs
[    0.075046] usbcore: registered new interface driver hub
[    0.075092] usbcore: registered new device driver usb
[    0.264248] usb usb1: configuration #1 chosen from 1 choice
[    0.265023] usb usb2: configuration #1 chosen from 1 choice
[    0.265409] usb usb3: configuration #1 chosen from 1 choice
[    0.268704] usb usb4: configuration #1 chosen from 1 choice
[    0.616086] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    0.795005] usb 1-1: configuration #1 chosen from 1 choice
[   23.457555] 8712_usb_endpoint_descriptor(0):
[   23.457569] 8712_usb_endpoint_descriptor(1):
[   23.457582] 8712_usb_endpoint_descriptor(2):
[   23.457594] 8712_usb_endpoint_descriptor(3):
[   23.983859] usbcore: registered new interface driver r871x_usb_drv
[ 1121.811680] usb 1-1: USB disconnect, address 2
[ 1121.820075] [usb_read_port_complete] purb->status(-108) != 0
[ 1122.520146] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 1137.852166] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 1153.184132] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 1168.516162] usb 1-1: new high speed USB device using ehci_hcd and address 6
sembrerebbe che con lsusb dice che ubuntu non vede più la chiavetta.  ???
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Ho tolto il cavetto ethernet, ho riavviato il notebook ed ora la connessione wireless funziona di nuovo, so già che funzionerà per 20 minuti circa e poi si disconnette la connessione wi fi.
Ho notato che quando si disconnette la chiavetta la lucetta led verde lampeggiante che si vede sulla chiavetta, quando la connessione wi fi funziona, si spegne

Non so forse c'è da impostare qualche comando che dica di tenere la connessione wi fi sempre attiva e di non spegnere la chiavetta.
Sarei felice anche solo di dare un comando per riattivare la connessione quando si disconnette senza dover riavviare il notebook.
Ho provato anche a togliere la chiavetta e reinfilarla nella porta usb ma non va, bisogna per forza riavviare il notebook.

Grazie
Ultima modifica di escort il venerdì 16 marzo 2012, 20:30, modificato 1 volta in totale.
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
Messaggi: 24884
Iscrizione: mercoledì 17 marzo 2010, 17:44
Desktop: ubuntu
Distribuzione: Ubuntu 22.04.3 LTS x86_64
Sesso: Maschile
Località: Pisa

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da magozurlinux »

Prego, di nulla.

Da terminale postami questo comando:

Codice: Seleziona tutto

rfkill list
Ubuntu 22.04 LTS Desktop :ciao:
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Questa è la risposta che da quando la linea wireless funziona:

Codice: Seleziona tutto

chrome@ubuntu:~$ rfkill list
chrome@ubuntu:~$ ^C
chrome@ubuntu:~$ rfkill list
chrome@ubuntu:~$ frkill list
Comando "frkill" non trovato. Forse si intendeva:
 Comando "rfkill" dal pacchetto "rfkill" (universe)
 Comando "rfkill" dal pacchetto "wireless-tools" (main)
 Comando "rkill" dal pacchetto "pslist" (universe)
frkill: comando non trovato
chrome@ubuntu:~$ rfkill list
chrome@ubuntu:~$ 
in pratica non restituisce nulla.

Non appena cade la connessione wi fi posto anche cosa restituisce quando cade la connessione wi fi.

Devo aggiungere che ho trovato nella scatola una specie di prolunga usb che tiene la chiavetta wi fi più distante dal notebook e ora sto utilizzando anche questa prolunga usb con la chiavetta e sembra che la connessione dura più a lungo, ovvero fa più fatica a cadere.

Immagine

Uploaded with ImageShack.us
Ultima modifica di escort il sabato 17 marzo 2012, 8:42, modificato 1 volta in totale.
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Questo il risultato dopo che cade la connessione wireless

Codice: Seleziona tutto

chrome@ubuntu:~$ rfkill list
chrome@ubuntu:~$ frkill list
Comando "frkill" non trovato. Forse si intendeva:
 Comando "rfkill" dal pacchetto "rfkill" (universe)
 Comando "rfkill" dal pacchetto "wireless-tools" (main)
 Comando "rkill" dal pacchetto "pslist" (universe)
frkill: comando non trovato
chrome@ubuntu:~$ rfkill
Usage:	rfkill [options] command
Options:
	--version	show version (0.4)
Commands:
	help
	event
	list [IDENTIFIER]
	block IDENTIFIER
	unblock IDENTIFIER
where IDENTIFIER is the index no. of an rfkill switch or one of:
	<idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm
chrome@ubuntu:~$ rfkill list
chrome@ubuntu:~$ 
pare che non restituisce nulla  ???
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
Messaggi: 24884
Iscrizione: mercoledì 17 marzo 2010, 17:44
Desktop: ubuntu
Distribuzione: Ubuntu 22.04.3 LTS x86_64
Sesso: Maschile
Località: Pisa

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da magozurlinux »

Se il comando rfkill list non restituisce nulla, vuol dire che non è bloccata via software.

Se dopo 20 minuti si interrompe la connessione, vuol dire che il modulo driver incluso nel kernel non va più bene per la tua chiavetta; sul cd di installazione della tua chiavetta Asus dovrebbe esserci una cartella Linux col pacchetto linux; vedi se trovi il file README per l'installazione, altrimenti proviamo insieme a reinstallarlo.

Ciao
Ultima modifica di magozurlinux il sabato 17 marzo 2012, 12:24, modificato 1 volta in totale.
Ubuntu 22.04 LTS Desktop :ciao:
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Si penso anche io che sia una questione di driver installati male.

I driver che io ho installato in modo empirico sono quelli che ho trovato qui in quanto pare siano gli ultimi driver aggiornati:

http://www.realtek.com.tw/downloads/dow ... #RTL8192SU

Come si fa a disinstallarli prima di fare la giusta installazione?

Qui sotto il file readme che c'è nel cd.
Release Date: 2009-0825, ver 0003
RTL8192SU Linux driver
  --This driver supports RealTek rtl8192SU USB Wireless LAN NIC
    for
    2.6 kernel:
    Fedora Core 2/3/4/5, Debian 3.1, Mandrake 10.2/Mandriva 2006,
    SUSE 9.3/10.1/10.2, Gentoo 3.1, Ubuntu 7.10/8.04, etc.
    2.4 kernel:
    Redhat 9.0/9.1

===============================================================================
Component
===============================================================================
The driver is composed of several parts:
1. Firmare to make nic work
          1.1 firmare/RTL8192SU

2. Module source code
  2.1 ieee80211
  2.2 HAL/rtl8192u
  2.3 wpa_supplicant-0.5.10 (User can download the latest version from
      internet also, but it is suggested to use default package contained
      in the distribution because there should less compilation issue.)

3. Script to build the modules
  3.1 Makefile

4. Script to load/unload modules
  4.1 wlan0up
  4.2 wlan0down

5. Script and configuration for DHCP
  5.1 wlan0dhcp
  5.2 ifcfg-wlan0

6. Example of supplicant configuration file:
  6.1 wpa1.conf

7. Script to run wpa_supplicant
  7.1 runwpa

===============================================================================
Installation
===============================================================================
>
Runing the scripts accomplish all operations including building up modules
from the source code, installing driver to the kernel and starting up the nic.
1. Build up the drivers from the source code
  make

2. Install the driver to the kernel
          make install
          reboot

3. bring up wlan if nic is not brought up by GUI, such as NetworkManager
  ifconfig wlan0 up
  Note: use ifconfig to check whether wlan0 is brought up and use iwconfig to check your wlan interface name,
                since it may change wlan0 to wlan1,etc.

>
Or only load the driver module to kernel and start up nic.
1. Build up the drivers from the source code
  make
        2. Copy firmware to /lib/firmware/ or /lib/firmware/(KERNEL_VERSION)/
            cp -rf firmware/RTL8192SU /lib/firmware
          or
            cp -rf firmware/RTL8192SU /lib/firmware/(KERNEL_VERSION)
          Note: This depends on whether (KERNEL_VERSION) subdirectory exists under /lib/firmware

3. Load driver module to kernel and start up nic.
  ./wlan0up
          Note: when "insmod: error inserting 'xxxx.ko': -1 File exists" comes out
                after run ./wlan0up, please run ./wlan0down first, then it should
                be ok..
  Note: If you see the message of "unkown symbol" during ./wlan0up, it
is suggested to build driver by >.

===============================================================================
Set wireless lan MIBs
===============================================================================
This driver uses Wireless Extension as an interface allowing you to set
Wireless LAN specific parameters.

Current driver supports "iwlist" to show the device status of nic
        iwlist wlan0 [parameters]
where
        parameter explaination      [parameters]   
        -----------------------    ------------- 
        Show available chan and freq freq / channel 
        Show and Scan BSS and IBSS scan[ning]         
        Show supported bit-rate        rate / bit[rate]       

For example:
iwlist wlan0 channel
iwlist wlan0 scan
iwlist wlan0 rate

Driver also supports "iwconfig", manipulate driver private ioctls, to set
MIBs.

iwconfig wlan0 [parameters] [val]
where
parameter explaination      [parameters]        [val] constraints
        -----------------------    -------------        ------------------
        Connect to AP by address    ap              [mac_addr]
        Set the essid, join (I)BSS  essid            [essid]
        Set operation mode          mode                {Managed|Ad-hoc}
        Set keys and security mode  key/enc[ryption]    {N|open|restricted|off}

For example:
iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
iwconfig wlan0 essid "ap_name"
iwconfig wlan0 mode Ad-hoc
iwconfig wlan0 essid "name" mode Ad-hoc
iwconfig wlan0 key 0123456789 [2] open
iwconfig wlan0 key off
iwconfig wlan0 key restricted [3] 0123456789
        Note: Better to set these MIBS without GUI such as NetworkManager and be sure that our
              nic has been brought up before these settings. WEP key index 2-4 is not supportted by
              NetworkManager.

===============================================================================
Getting IP address
===============================================================================
After start up the nic, the network needs to obtain an IP address before
transmit/receive data.
This can be done by setting the static IP via "ifconfig wlan0 IP_ADDRESS"
command, or using DHCP.

If using DHCP, setting steps is as below:
(1)connect to an AP via "iwconfig" settings
iwconfig wlan0 essid [name] or
iwconfig wlan0 ap XX:XX:XX:XX:XX:XX

(2)run the script which run the dhclient
./wlan0dhcp
          or
dhcpcd wlan0
              (Some network admins require that you use the
              hostname and domainname provided by the DHCP server.
              In that case, use
dhcpcd -HD wlan0)


===============================================================================
WPAPSK/WPA2PSK
===============================================================================
Wpa_supplicant helps to secure wireless connection with the protection of
WPAPSK/WPA2PSK mechanism.

If the version of Wireless Extension in your system is equal or larger than 18,
WEXT driver interface is recommended. Otherwise, IPW driver interface is advised. 
Note: Wireless Extension is defined us "#define WIRELESS_EXT" in Kernel
Note: To check the version of wireless extension, please type "iwconfig -v"


If IPW driver interface is used, it us suggested to follow the steps from 1 to 6.
If wpa_supplicant has been installed in your system, only steps 5 and 6 are required
to be executed for WEXT driver interface.

To see detailed description for driver interface and wpa_supplicant, please type
"man wpa_supplicant". 

(1)Download latetest source code for wpa supplicant or use wpa_supplicant-0.5.10
  attached in this package. (It is suggested to use default package contained
          in the distribution because there should less compilation issue.)

  Unpack source code of WPA supplicant:

  tar -zxvf wpa_supplicant-0.5.10.tar.gz (e.g.)
  cd wpa_supplicant-0.5.10

(2)Create .config file:
  cp defconfig .config

(3)Edit .config file, uncomment the following line if ipw driver interface
  will be applied:
  #CONFIG_DRIVER_IPW=y.

(4)Build and install WPA supplicant:
  make
  cp wpa_cli wpa_supplicant /usr/local/bin

NOTE:
1. If make error for lack of , install the openssl lib(two ways):
  (1) Install the openssl lib from corresponding installation disc:
      Fedora Core 2/3/4/5(openssl-0.9.71x-xx),
      Mandrake10.2/Mandriva10.2(openssl-0.9.7x-xmdk),
      Debian 3.1(libssl-dev), Suse 9.3/10.0/10.1(openssl_devl),
      Gentoo(dev-libs/openssl), etc.
  (2) Download the openssl open source package from www.openssl.org, build and
      install it.
2. If make errors happen in RedHat(and also Fedora Core) for kssl.h,
please add lines below into Makefile
      CPPFLAGS+=-I/usr/kerboros/include

(5)Edit wpa_supplicant.conf to set up SSID and its passphrase.
  For example, the following setting in "wpa1.conf" means SSID
          to join is "BufAG54_Ch6" and its passphrase is "87654321".

  Example 1: Configuration for WPA-PWK
  network={
ssid="BufAG54_Ch6"
#scan_ssid=1 //see note 3
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="87654321"
priority=2
  }

    Example 2: Configuration for LEAP
    network={
ssid="BufAG54_Ch6"
key_mgmt=IEEE8021X
group=WEP40 WEP104
eap=LEAP
identity="user1"
password="1111"
  }
    Example 3: Linking to hidden ssid given AP's security policy exactly.(see note 3 below)
            ap_scan=2
    network={
ssid="Hidden_ssid"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
psk="12345678"
  }

    Example 4: Linking to ad-hoc (see note 4 below)
    ap_scan=2
    network={
ssid="Ad-hoc"
                mode=1
proto=WPA
key_mgmt=WPA-NONE
pairwise=NONE
group=TKIP
psk="12345678"
}
Note: 1. proto=WPA for WPA, proto=RSN for WPA2.
      2. If user needs to connect an AP with WPA or WPA2 mixed mode, it is suggested
to set the cipher of pairwise and group to both CCMP and TKIP unless you
know exactly which cipher type AP is configured.
      3. When connecting to hidden ssid, explicit security policy should be given with
ap_scan=2 being setting.
      4. It is suggested setting ap_scan to 2 and mode to 1 when linking to or creating an ad-hoc. Group and pairwise
cipher type should also be explicit, always with group setting to TKIP or CCMP and pairwise setting
to NONE. Lower version wpa_supplicant may not allow setting group to CCMP with pairwise setting to NONE.
So if any problem, you may try to set both group and pairwise to CCMP, leaving other setting unchanged, when
        connecting to an CCMP-encrypted ad-hoc.
      5. More config setting option, please refer to wpa_supplicant.conf in wpa_supplicant.tar.gz that we provide.

(6)Execute WPA supplicant (Assume rtl8192E and related modules had been
          loaded):
          ./runwpa

          Note: The script runwpa will check Wireless Extension version automatically.
                If the version of Wireless Extension is equal or larger than 18, the
                option of "-D wext" is selected. If the version of Wireless extension
                is less than 18, the option of "-D ipw" is selected.

===============================================================================
For kernel 2.4 notes
===============================================================================
    First of all, we have to install the necessary tools for building the driver. In the RedHat9 installation, please
choose the "Customize the set of packages to be install" and include two packages "Development Tools", "Kernel Development".

    The RedHat 9 (kernel 2.4.20-8) just suppports the WEP security for Wifi. We have to patch the kernel with updating
wireless extension so that the kernel just supports the WPA, WPA2 functionalities by stardard wireless extension. This
driver had been verified on the patched 2.4.20-8 kernel and the WPA/WPA2 PSK works fine on the patched kernel.

    First of all, we must have three patch file to update the wireless extension.
    1. iw241_we16-6.diff    (http://www.hpl.hp.com/personal/Jean_Tou ... e16-6.diff)
    2. iw249_we17-13.diff    (http://www.hpl.hp.com/personal/Jean_Tou ... 17-13.diff)
    3. iw240_we18-5.diff    (http://www.hpl.hp.com/personal/Jean_Tou ... e18-5.diff)
   
    Copy these three patch files to the patient directory of the linux kernel source folder and use the following
command to patch the RedHat 9 kernel.
    $> patch -p0 patch -p0 patch -p0 < ./iw240_we18-5.diff
   
    After patching the kernel, please remember to re-build the updated kernel/modules and use it for your target platform.
Now, the patched kernel had got the ability to support the WPA/WPA2 PSK functionalities with wireless extension interface.

    Reminding: At the first time to use the wpa_supplicant, pleasee remember to compile the wpa_supplicant with the updated
kernel so that the wpa_supplicant will get the latest wireless extension version for supporting more functionalities.

    Finally, the kernel 2.4 can't support the WPS functionality.
Allegati
readme.txt
(11.74 KiB) Scaricato 84 volte
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
Messaggi: 24884
Iscrizione: mercoledì 17 marzo 2010, 17:44
Desktop: ubuntu
Distribuzione: Ubuntu 22.04.3 LTS x86_64
Sesso: Maschile
Località: Pisa

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da magozurlinux »

Il pacchetto per Linux è nella tua cartella home?

Se l'hai compilato precedentemente, apri il terminale ed entra nella cartella rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/ e dai questi comandi:

Codice: Seleziona tutto

cd rtl8712_8188*

Codice: Seleziona tutto

sudo make uninstall
Ultima modifica di magozurlinux il domenica 18 marzo 2012, 19:46, modificato 1 volta in totale.
Ubuntu 22.04 LTS Desktop :ciao:
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

CIao,
si la cartella con i files di installazione rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401 sono nella cartella home.
Mi sono connesso via ethernet.
Ho eseguito i comandi da terminale e questo è quello che restituisce:

Codice: Seleziona tutto

chrome@ubuntu:~$ '/home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401' cd rtl8712_8188*
bash: /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401: è una directory
chrome@ubuntu:~$ sudo make uninstall
[sudo] password for chrome: 
make: ***  Nessuna regola per generare l'obiettivo "uninstall".  Arresto.
chrome@ubuntu:~$ 
Forse devo togliere la chiavetta mentre faccio questi passaggi o la lascio inserita nella porta usb indifferentemente?

Per essere precisi io l'installazione l'avevo fatta da /home/chrome/ciao/driver ma anche da qui mi da la stessa risposta:

Codice: Seleziona tutto

chrome@ubuntu:~$ '/home/chrome/ciao/driver' cd rtl8712_8188*
bash: /home/chrome/ciao/driver: è una directory
chrome@ubuntu:~$ sudo make uninstall
[sudo] password for chrome: 
make: ***  Nessuna regola per generare l'obiettivo "uninstall".  Arresto.
chrome@ubuntu:~$ 
Ultima modifica di escort il lunedì 19 marzo 2012, 0:11, modificato 1 volta in totale.
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
Messaggi: 24884
Iscrizione: mercoledì 17 marzo 2010, 17:44
Desktop: ubuntu
Distribuzione: Ubuntu 22.04.3 LTS x86_64
Sesso: Maschile
Località: Pisa

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da magozurlinux »

La compilazione va fatta a chiavetta tolta.

Da terminale dai questi comandi:

Codice: Seleziona tutto

cd rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401

Codice: Seleziona tutto

make
se non ci sono errori di compilazione, dai questi comandi:

Codice: Seleziona tutto

sudo make install

Codice: Seleziona tutto

reboot
Al riavvio inserisci la chiavetta; vedi se ora funziona.
Ubuntu 22.04 LTS Desktop :ciao:
Avatar utente
escort
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 426
Iscrizione: mercoledì 14 marzo 2012, 21:15
Desktop: xubuntu
Distribuzione: Ubuntu 22.10

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da escort »

Il comando make lo fa, il comando make install da Errore 1 :

install: impossibile rimuovere "/lib/modules/2.6.32-39-generic/kernel/drivers/net/wireless/8712u.ko": Permesso negato
make: *** [install] Errore 1


Codice: Seleziona tutto

chrome@ubuntu:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401$ make
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.32-39-generic/build M=/home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401  modules
make[1]: ingresso nella directory "/usr/src/linux-headers-2.6.32-39-generic"
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/cmd/rtl871x_cmd.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/cmd/rtl8712_cmd.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/crypto/rtl871x_security.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/debug/rtl871x_debug.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/eeprom/rtl871x_eeprom.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/efuse/rtl8712_efuse.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/hal/rtl8712/hal_init.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/hal/rtl8712/usb_ops.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/hal/rtl8712/usb_ops_linux.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/hal/rtl8712/usb_halinit.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/io/rtl871x_io.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/io/rtl8712_io.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/ioctl/rtl871x_ioctl_query.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/ioctl/rtl871x_ioctl_set.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/ioctl/rtl871x_ioctl_linux.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/ioctl/rtl871x_ioctl_rtl.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/led/rtl8712_led.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/mlme/ieee80211.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/mlme/rtl871x_mlme.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/mp/rtl871x_mp.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/mp/rtl871x_mp_ioctl.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/os_dep/linux/io_linux.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/os_dep/linux/xmit_linux.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/os_dep/linux/cmd_linux.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/os_dep/linux/mlme_linux.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/os_dep/linux/recv_linux.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/os_intf/osdep_service.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/os_intf/linux/os_intfs.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/os_intf/linux/usb_intf.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/pwrctrl/rtl871x_pwrctrl.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/recv/rtl871x_recv.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/recv/rtl8712_recv.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/rf/rtl871x_rf.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/rf/rtl8712_rf.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/sta_mgt/rtl871x_sta_mgt.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/xmit/rtl871x_xmit.o
  CC [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/xmit/rtl8712_xmit.o
  LD [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/8712u.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/8712u.mod.o
  LD [M]  /home/chrome/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401/8712u.ko
make[1]: uscita dalla directory "/usr/src/linux-headers-2.6.32-39-generic"
chrome@ubuntu:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401$ make install
install -p -m 644 8712u.ko  /lib/modules/2.6.32-39-generic/kernel/drivers/net/wireless/
install: impossibile rimuovere "/lib/modules/2.6.32-39-generic/kernel/drivers/net/wireless/8712u.ko": Permesso negato
make: *** [install] Errore 1
chrome@ubuntu:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401$
Ultima modifica di escort il lunedì 19 marzo 2012, 18:22, modificato 1 volta in totale.
Avatar utente
magozurlinux
Accecante Asceta
Accecante Asceta
Messaggi: 24884
Iscrizione: mercoledì 17 marzo 2010, 17:44
Desktop: ubuntu
Distribuzione: Ubuntu 22.04.3 LTS x86_64
Sesso: Maschile
Località: Pisa

Re: Problemi con chiavetta wi fi asus wl-167g v3

Messaggio da magozurlinux »

chrome@ubuntu:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20110401$ make install
install -p -m 644 8712u.ko  /lib/modules/2.6.32-39-generic/kernel/drivers/net/wireless/
install: impossibile rimuovere "/lib/modules/2.6.32-39-generic/kernel/drivers/net/wireless/8712u.ko": Permesso negato
make: *** [install] Errore 1
Nel comando ti sei dimenticato di dare sudo prima di make install

Ridai il comando corretto come ti avevo postato nel precedente messaggio.
Ubuntu 22.04 LTS Desktop :ciao:
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Vinileite1 e 29 ospiti