masterizzatore DVD lettore bluray LG CH10LS20
masterizzatore DVD lettore bluray LG CH10LS20
ho da poco assmblato un nuovo pc e volevo come OS solo ubuntu.
ma ho qualche problemino....
credo che tutti i problemi siano generati da il lettore della LG CH10LS20.
infatti ubuntu non lo vede (a differenza del bios e di win7 installato per provarlo)
non so cosa fare. perche' inoltre ubuntu live funziona, ma installato non riesco neanche a vedere il caricamento il quale si blocca nello schermo violaceo senza scritte.
aiutatemi grazie
ciaooo
Re: masterizzatore DVD lettore bluray LG CH10LS20
scheda madre sabertooth 990FX
- cristian_c
- Accecante Asceta
- Messaggi: 23422
- Iscrizione: lunedì 29 ottobre 2007, 11:31
Re: masterizzatore DVD lettore bluray LG CH10LS20
Codice: Seleziona tutto
cat /etc/fstab
- magozurlinux
- Accecante Asceta
- Messaggi: 24913
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: ubuntu
- Distribuzione: Ubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: masterizzatore DVD lettore bluray LG CH10LS20
Codice: Seleziona tutto
dmesg | grep CD-ROM
Codice: Seleziona tutto
cdrecord -scanbus
Codice: Seleziona tutto
wodim --devices
Codice: Seleziona tutto
ls -l /media
Codice: Seleziona tutto
sudo lshw -C disk
- cristian_c
- Accecante Asceta
- Messaggi: 23422
- Iscrizione: lunedì 29 ottobre 2007, 11:31
Re: masterizzatore DVD lettore bluray LG CH10LS20
Accidenti, volevo proprio suggerirlo quel comando. Ma me l'ero scordato :(wodim --devices
Re: masterizzatore DVD lettore bluray LG CH10LS20
magozurlinux ha scritto: Oltre al comando suggerito da cristian_c, da terminale postami anche questi comandi:
Codice: Seleziona tutto
dmesg | grep CD-ROM
Codice: Seleziona tutto
cdrecord -scanbus
Codice: Seleziona tutto
wodim --devices
Codice: Seleziona tutto
ls -l /media
Codice: Seleziona tutto
sudo lshw -C disk
Ciao! Io ho fatto così
"anna@anna-desktop:~$ cdrecord -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
anna@anna-desktop:~$ casa@casa-desktop:~$ ls -l /media
casa@casa-desktop:~$: comando non trovato
anna@anna-desktop:~$ totale 4
Comando "totale" non trovato. Forse si intendeva:
Comando "total" dal pacchetto "radiance" (universe)
totale: comando non trovato
anna@anna-desktop:~$ drwxr-xr-x 2 root root 4096 2011-04-27 14:09 cdrom0
drwxr-xr-x: comando non trovato
anna@anna-desktop:~$ casa@casa-desktop:~$ cat /etc/fstab
casa@casa-desktop:~$: comando non trovato
anna@anna-desktop:~$ wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
anna@anna-desktop:~$ ls -l /media
totale 0
anna@anna-desktop:~$ sudo lshw -C disk
[sudo] password for anna:
*-disk
description: ATA Disk
product: MAXTOR STM332082
vendor: Maxtor
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 3.AA
serial: 6QF00V3M
size: 298GiB (320GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=00093712"
Sembra che non ci sia nulla, eppure c'è!!!!!
- cristian_c
- Accecante Asceta
- Messaggi: 23422
- Iscrizione: lunedì 29 ottobre 2007, 11:31
Re: masterizzatore DVD lettore bluray LG CH10LS20
Codice: Seleziona tutto
wodim -scanbus
- magozurlinux
- Accecante Asceta
- Messaggi: 24913
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: ubuntu
- Distribuzione: Ubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: masterizzatore DVD lettore bluray LG CH10LS20
lascio a te la discussione, io ho risposto 8 mesi fa, senza risposta; seguirò la discussione, in caso di aiuto, interverrò!
Re: masterizzatore DVD lettore bluray LG CH10LS20
Codice: Seleziona tutto
anna@anna-desktop:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
/dev/sda5 none swap sw 0 0
anna@anna-desktop:~$ dmesg | grep CD-ROM
anna@anna-desktop:~$
anna@anna-desktop:~$
anna@anna-desktop:~$ Codice:
Codice:: comando non trovato
anna@anna-desktop:~$
anna@anna-desktop:~$ cdrecord -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
anna@anna-desktop:~$
anna@anna-desktop:~$
anna@anna-desktop:~$ Codice:
Codice:: comando non trovato
anna@anna-desktop:~$
anna@anna-desktop:~$ wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
anna@anna-desktop:~$
anna@anna-desktop:~$
anna@anna-desktop:~$ Codice:
Codice:: comando non trovato
anna@anna-desktop:~$
anna@anna-desktop:~$ ls -l /media
totale 0
anna@anna-desktop:~$
anna@anna-desktop:~$
anna@anna-desktop:~$ Codice:
Codice:: comando non trovato
anna@anna-desktop:~$
anna@anna-desktop:~$ sudo lshw -C disk
[sudo] password for anna:
*-disk
description: ATA Disk
product: MAXTOR STM332082
vendor: Maxtor
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 3.AA
serial: 6QF00V3M
size: 298GiB (320GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=00093712
- cristian_c
- Accecante Asceta
- Messaggi: 23422
- Iscrizione: lunedì 29 ottobre 2007, 11:31
Re: masterizzatore DVD lettore bluray LG CH10LS20
2) Non hai digitato l'ultimo comando che ti era stato consigliato
- magozurlinux
- Accecante Asceta
- Messaggi: 24913
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: ubuntu
- Distribuzione: Ubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: masterizzatore DVD lettore bluray LG CH10LS20
Il masterizzatore bluray LG CH10LS20 è SATA, entra nel BIOS e imposta come boot CD-ROM SATA e non IDE, altrimenti non viene rilevato.
Altra prova in caso di insuccesso:
Il masterizzatore è montato su un PC dedktop o notebook?
Se è un pc dedktop, a pc spento, togli il coperchio del pc, togli il cavo di alimentazione ed il cavo SATA del masterizzatore; poi riaccendi il pc ed avvia Ubuntu, apri il terminale e dai questo comando:
Codice: Seleziona tutto
sudo lshw -C disk
Spegni il pc.
Riattacca il cavo SATA ed il cavo di alimentazione del masterizzatore.
Riaccendi il pc; avvia Ubuntu, vedi se ora il masterizzatore ha ripreso a funzionare.
Re: masterizzatore DVD lettore bluray LG CH10LS20
E' un desktop.
Scusa ma credo che Ubuntu sia troppo complicato per me e per il mio esiguo tempo disponibile. Allora, provo ad entrare nel BIOS e gli dò il comando e poi vi aggiorno, grazie mille!
- cristian_c
- Accecante Asceta
- Messaggi: 23422
- Iscrizione: lunedì 29 ottobre 2007, 11:31
Re: masterizzatore DVD lettore bluray LG CH10LS20
Se premi il tasto break (pausa) all'accensione del pc si blocca la schermata e puoi leggere le scritte visibili nella schermata iniziale (tra cui l'indicazione di come si accede al bios). Per sbloccare, premere nuovamente break (yes)ismaela69 ha scritto: Ok, come entro nel bios? Quale F è?
E' un desktop.
Scusa ma credo che Ubuntu sia troppo complicato per me e per il mio esiguo tempo disponibile. Allora, provo ad entrare nel BIOS e gli dò il comando e poi vi aggiorno, grazie mille!
Re: masterizzatore DVD lettore bluray LG CH10LS20
Ok grazie! Ho riscontrato che nel Bios è già impostato come CD ROM SATA invece che IDE. Devo eseguire la procedura di rimozione del coperchio etc.....tremo..non l'ho mai fatto!!!!!cristian_c ha scritto:Se premi il tasto break (pausa) all'accensione del pc si blocca la schermata e puoi leggere le scritte visibili nella schermata iniziale (tra cui l'indicazione di come si accede al bios). Per sbloccare, premere nuovamente break (yes)ismaela69 ha scritto: Ok, come entro nel bios? Quale F è?
E' un desktop.
Scusa ma credo che Ubuntu sia troppo complicato per me e per il mio esiguo tempo disponibile. Allora, provo ad entrare nel BIOS e gli dò il comando e poi vi aggiorno, grazie mille!
- cristian_c
- Accecante Asceta
- Messaggi: 23422
- Iscrizione: lunedì 29 ottobre 2007, 11:31
Re: masterizzatore DVD lettore bluray LG CH10LS20
Re: masterizzatore DVD lettore bluray LG CH10LS20
Codice: Seleziona tutto
anna@anna-desktop:~$ dmesg | grep CD-ROM
anna@anna-desktop:~$
anna@anna-desktop:~$
anna@anna-desktop:~$ Codice:
Codice:: comando non trovato
anna@anna-desktop:~$
anna@anna-desktop:~$ cdrecord -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
anna@anna-desktop:~$
anna@anna-desktop:~$
anna@anna-desktop:~$ Codice:
Codice:: comando non trovato
anna@anna-desktop:~$
anna@anna-desktop:~$ wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
anna@anna-desktop:~$
anna@anna-desktop:~$
anna@anna-desktop:~$ Codice:
Codice:: comando non trovato
anna@anna-desktop:~$
anna@anna-desktop:~$ ls -l /media
totale 0
anna@anna-desktop:~$
anna@anna-desktop:~$
anna@anna-desktop:~$ Codice:
Codice:: comando non trovato
anna@anna-desktop:~$
anna@anna-desktop:~$ sudo lshw -C diskwodim --devices
[sudo] password for anna:
Hardware Lister (lshw) - B.02.15
usage: lshw [-format] [-options ...]
lshw -version
-version print program version (B.02.15)
format can be
-html output hardware tree as HTML
-xml output hardware tree as XML
-short output hardware paths
-businfo output bus information
-X use graphical interface
options can be
-class CLASS only show a certain class of hardware
-C CLASS same as '-class CLASS'
-c CLASS same as '-class CLASS'
-disable TEST disable a test (like pci, isapnp, cpuid, etc. )
-enable TEST enable a test (like pci, isapnp, cpuid, etc. )
-quiet don't display status
-sanitize sanitize output (remove sensitive information like serial numbers, etc.)
-numeric output numeric IDs (for PCI, USB, etc.)
Codice: Seleziona tutto
anna@anna-desktop:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
/dev/sda5 none swap sw 0 0
anna@anna-desktop:~$ dmesg | grep CD-ROM
anna@anna-desktop:~$ cdrecord -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
anna@anna-desktop:~$ wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
anna@anna-desktop:~$ ls -l /media
totale 0
anna@anna-desktop:~$ sudo lshw -C disk
*-disk
description: ATA Disk
product: MAXTOR STM332082
vendor: Maxtor
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 3.AA
serial: 6QF00V3M
size: 298GiB (320GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=00093712
Re: masterizzatore DVD lettore bluray LG CH10LS20
Codice: Seleziona tutto
anna@anna-desktop:~$ wodim dev=help
Supported SCSI transports for this platform:
Transport name: sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example: ATAPI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: RSCSI
Transport descr.: Remote SCSI
Transp. layer ind.: REMOTE:
Target specifier: rscsi@host:bus,target,lun
Target example: REMOTE:rscsi@host:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
- cristian_c
- Accecante Asceta
- Messaggi: 23422
- Iscrizione: lunedì 29 ottobre 2007, 11:31
Re: masterizzatore DVD lettore bluray LG CH10LS20
Codice: Seleziona tutto
wodim -scanbus
- magozurlinux
- Accecante Asceta
- Messaggi: 24913
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: ubuntu
- Distribuzione: Ubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: masterizzatore DVD lettore bluray LG CH10LS20
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 17 ospiti