Webcam Creative Vista... Non va neanche questa.. inizio ad odiare linux

[Milos]

Ciao a tutti sono molto amareggiato perchè non riesco a far funzionare nessuna maledettissima webcam su ubuntu...

ho un hp pavilion dv6000 e non va la sua webcam di base.. oggi compro un creative webcam vista e non va....

non so che fare datemi un aiuto vi prego non ce la faccio piu...

grazie in anticipo

[simo_magic]

anche tu però...compri roba che non controlli nemmeno se è supportata,si chiama creative VISTA e poi ti lamenti se non va su ubuntu...

[granma]

Al massimo prenditela con il produttore che  non distribuisce driver per linux

[Milos]

ma vista intendevo il nome.. cioè la cosa è strana praticamente sul settaggio audio video di amsn va me la riconosce e tutto poi mi collego con mio fratello e va.. e poi non va con nessun altro...

stava in offerta a sette euro con microfono e cuffie compresa.. non potevo non prenderla...

cioè camorana non va mercury messenger non va solo amsn a volte non la riconosce.. bahh

[simo_magic]

lo so che vista è il nome della cam...proprio perchè l'hanno chiamata vista vuol dire che l'hanno fatta pensando esclusivamente a software microsoft...specificatamente per vista magari...
dai questi comandi e riportaci l'output

Codice: Seleziona tutto

dmesg
ls /dev/video*
lsmod

[Milos]

dmesg mi da questo

[    0.000000]  DMA zone: 4064 pages, LIFO batch:0
[    0.000000]  Normal zone: 1760 pages used for memmap
[    0.000000]  Normal zone: 223520 pages, LIFO batch:31
[    0.000000]  HighMem zone: 252 pages used for memmap
[    0.000000]  HighMem zone: 32116 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 HP                                    ) @ 0x000f7de0
[    0.000000] ACPI: RSDT (v001 HP    30BC    0x06040000  LTP 0x00000000) @ 0x3fe7deab
[    0.000000] ACPI: FADT (v001 HP    30BC    0x06040000 LOHR 0x0000005a) @ 0x3fe85dee
[    0.000000] ACPI: MADT (v001 HP    30BC    0x06040000 LOHR 0x0000005a) @ 0x3fe85e62
[    0.000000] ACPI: HPET (v001 HP    30BC    0x06040000 LOHR 0x0000005a) @ 0x3fe85eca
[    0.000000] ACPI: MCFG (v001 HP    30BC    0x06040000 LOHR 0x0000005a) @ 0x3fe85f02
[    0.000000] ACPI: BOOT (v001 HP    30BC    0x06040000  LTP 0x00000001) @ 0x3fe85fd8
[    0.000000] ACPI: MADT (v001 HP    30BC    0x06040000  LTP 0x00000000) @ 0x3fe85f70
[    0.000000] ACPI: SSDT (v001  HP    30BC    0x00001000 INTL 0x20050624) @ 0x3fe7e8bf
[    0.000000] ACPI: SSDT (v001 HP    30BC    0x00003000 INTL 0x20050624) @ 0x3fe7deef
[    0.000000] ACPI: DSDT (v001 HP    30BC    0x06040000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: 2 duplicate APIC table ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:14 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] Detected 1729.774 MHz processor.
[  26.778128] Built 1 zonelists.  Total pages: 259700
[  26.778132] Kernel command line: root=UUID=2e01162d-6220-4df8-a0c5-191c67feb0fb ro quiet splash locale=it_IT
[  26.778295] mapped APIC to ffffd000 (fee00000)
[  26.778298] mapped IOAPIC to ffffc000 (fec00000)
[  26.778300] Enabling fast FPU save and restore... done.
[  26.778303] Enabling unmasked SIMD FPU exception support... done.
[  26.778311] Initializing CPU#0
[  26.778384] PID hash table entries: 4096 (order: 12, 16384 bytes)
[  26.780824] Console: colour VGA+ 80x25
[  26.781122] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[  26.781498] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[  26.809996] Memory: 1026796k/1046976k available (1992k kernel code, 19512k reserved, 900k data, 328k init, 129472k highmem)
[  26.810005] virtual kernel memory layout:
[  26.810006]    fixmap  : 0xfff4e000 - 0xfffff000  ( 708 kB)
[  26.810008]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)
[  26.810009]    vmalloc : 0xf8800000 - 0xff7fe000  ( 111 MB)
[  26.810010]    lowmem  : 0xc0000000 - 0xf8000000  ( 896 MB)
[  26.810012]      .init : 0xc03d9000 - 0xc042b000  ( 328 kB)
[  26.810013]      .data : 0xc02f2374 - 0xc03d36d4  ( 900 kB)
[  26.810014]      .text : 0xc0100000 - 0xc02f2374  (1992 kB)
[  26.810018] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[  26.810181] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[  26.810186] hpet0: 3 64-bit timers, 14318180 Hz
[  26.811191] Using HPET for base-timer
[  26.890040] Calibrating delay using timer specific routine.. 3463.01 BogoMIPS (lpj=6926037)
[  26.890078] Security Framework v1.0.0 initialized
[  26.890085] SELinux:  Disabled at boot.
[  26.890100] Mount-cache hash table entries: 512
[  26.890223] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[  26.890232] monitor/mwait feature present.
[  26.890234] using mwait in idle threads.
[  26.890238] CPU: L1 I cache: 32K, L1 D cache: 32K
[  26.890240] CPU: L2 cache: 2048K
[  26.890243] CPU: Physical Processor ID: 0
[  26.890245] CPU: Processor Core ID: 0
[  26.890247] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[  26.890256] Compat vDSO mapped to ffffe000.
[  26.890259] Remapping vsyscall page to ffffe000
[  26.890271] Checking 'hlt' instruction... OK.
[  26.906106] SMP alternatives: switching to UP code
[  26.906445] Early unpacking initramfs... done
[  27.235288] ACPI: Core revision 20060707
[  27.235513] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[  27.241637] CPU0: Intel Genuine Intel(R) CPU          T2250  @ 1.73GHz stepping 08
[  27.241657] SMP alternatives: switching to SMP code
[  27.241782] Booting processor 1/1 eip 3000
[  27.252200] Initializing CPU#1
[  27.329243] Calibrating delay using timer specific routine.. 3459.15 BogoMIPS (lpj=6918315)
[  27.329250] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[  27.329255] monitor/mwait feature present.
[  27.329259] CPU: L1 I cache: 32K, L1 D cache: 32K
[  27.329261] CPU: L2 cache: 2048K
[  27.329263] CPU: Physical Processor ID: 0
[  27.329264] CPU: Processor Core ID: 1
[  27.329266] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[  27.329718] CPU1: Intel Genuine Intel(R) CPU          T2250  @ 1.73GHz stepping 08
[  27.329742] Total of 2 processors activated (6922.17 BogoMIPS).
[  27.329942] ENABLING IO-APIC IRQs
[  27.330149] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[  27.476974] checking TSC synchronization across 2 CPUs: passed.
[    0.003996] Brought up 2 CPUs
[    0.232263] migration_cost=59
[    0.232546] Booting paravirtualized kernel on bare hardware
[    0.232646] Time:  7:35:15  Date: 06/26/107
[    0.232676] NET: Registered protocol family 16
[    0.232761] EISA bus registered
[    0.232766] ACPI: bus type pci registered
[    0.232917] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
[    0.232920] PCI: Using configuration type 1
[    0.232922] Setting up standard PCI resources
[    0.236528] ACPI: Interpreter enabled
[    0.236530] ACPI: Using IOAPIC for interrupt routing
[    0.237203] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.237209] PCI: Probing PCI hardware (bus 00)
[    0.238614] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.238619] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.238902] Boot video device is 0000:01:00.0
[    0.240074] PCI: Transparent bridge - 0000:00:1e.0
[    0.240162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.246917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.247877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.248128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.248395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.249247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.249797] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.250064] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[    0.250331] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[    0.250597] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[    0.250861] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[    0.251124] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[    0.251390] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[    0.251667] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[    0.252955] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.252966] pnp: PnP ACPI init
[    0.255127] pnp: PnP ACPI: found 10 devices
[    0.255131] PnPBIOS: Disabled by ACPI PNP
[    0.255173] PCI: Using ACPI for IRQ routing
[    0.255175] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.284175] NET: Registered protocol family 8
[    0.284177] NET: Registered protocol family 20
[    0.284483] pnp: 00:06: ioport range 0x6a0-0x6af has been reserved
[    0.284486] pnp: 00:06: ioport range 0x6b0-0x6ff has been reserved
[    0.284788] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[    0.284854] PCI: Bridge: 0000:00:01.0
[    0.284855]  IO window: disabled.
[    0.284859]  MEM window: dc000000-ddffffff
[    0.284863]  PREFETCH window: c0000000-cfffffff
[    0.284866] PCI: Bridge: 0000:00:1c.0
[    0.284870]  IO window: 2000-2fff
[    0.284876]  MEM window: d8000000-d9ffffff
[    0.284881]  PREFETCH window: d2000000-d3ffffff
[    0.284887] PCI: Bridge: 0000:00:1c.1
[    0.284890]  IO window: 3000-3fff
[    0.284896]  MEM window: d6000000-d7ffffff
[    0.284901]  PREFETCH window: d0000000-d1ffffff
[    0.284907] PCI: Bridge: 0000:00:1c.2
[    0.284910]  IO window: 4000-4fff
[    0.284916]  MEM window: da000000-dbffffff
[    0.284921]  PREFETCH window: d4000000-d5ffffff
[    0.284927] PCI: Bridge: 0000:00:1e.0
[    0.284929]  IO window: disabled.
[    0.284935]  MEM window: de000000-de0fffff
[    0.284939]  PREFETCH window: disabled.
[    0.284957] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.284962] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.284986] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.284992] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.285015] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[    0.285021] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.285045] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.285051] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.285063] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[    0.285069] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.285098] NET: Registered protocol family 2
[    0.339433] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.339540] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.340250] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.340611] TCP: Hash tables configured (established 131072 bind 65536)
[    0.340614] TCP reno registered
[    0.355483] checking if image is initramfs... it is
[    0.998787] Freeing initrd memory: 6789k freed
[    0.998965] Simple Boot Flag at 0x35 set to 0x1
[    0.999424] audit: initializing netlink socket (disabled)
[    0.999440] audit(1185435315.748:1): initialized
[    0.999538] highmem bounce pool size: 64 pages
[    0.999626] VFS: Disk quotas dquot_6.5.1
[    0.999646] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.999696] io scheduler noop registered
[    0.999699] io scheduler anticipatory registered
[    0.999701] io scheduler deadline registered
[    0.999713] io scheduler cfq registered (default)
[    0.999971] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    1.000008] assign_interrupt_mode Found MSI capability
[    1.000011] Allocate Port Service[0000:00:01.0:pcie00]
[    1.000101] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.000159] assign_interrupt_mode Found MSI capability
[    1.000162] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.000197] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.000318] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.000377] assign_interrupt_mode Found MSI capability
[    1.000379] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.000411] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.000532] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.000590] assign_interrupt_mode Found MSI capability
[    1.000593] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.000625] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.000804] isapnp: Scanning for PnP cards...
[    1.354092] isapnp: No Plug & Play device found
[    1.376560] Real Time Clock Driver v1.12ac
[    1.376617] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.377231] mice: PS/2 mouse device common for all mice
[    1.377787] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.378010] input: Macintosh mouse button emulation as /class/input/input0
[    1.378042] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.378046] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.378331] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.395216] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.395220] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.396376] EISA: Probing bus 0 at eisa.0
[    1.396385] Cannot allocate resource for EISA slot 1
[    1.396389] Cannot allocate resource for EISA slot 2
[    1.396391] Cannot allocate resource for EISA slot 3
[    1.396394] Cannot allocate resource for EISA slot 4
[    1.396413] EISA: Detected 0 cards.
[    1.426460] TCP cubic registered
[    1.426469] NET: Registered protocol family 1
[    1.426491] Starting balanced_irq
[    1.426497] Using IPI No-Shortcut mode
[    1.426610] ACPI: (supports S0 S3 S4 S5)
[    1.426658]  Magic number: 15:728:572
[    1.426715]  hash matches device ptyb4
[    1.426952] Freeing unused kernel memory: 328k freed
[    1.429411] Time: tsc clocksource has been installed.
[    1.434343] input: AT Translated Set 2 keyboard as /class/input/input1
[    2.669112] Capability LSM initialized
[    2.702864] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [30BC    ] [20060707]
[    2.703075] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [30BC    ] [20060707]
[    2.703324] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.703329] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.703825] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [30BC    ] [20060707]
[    2.704018] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [30BC    ] [20060707]
[    2.704316] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    2.704322] ACPI: Processor [CPU1] (supports 8 throttling states)
[    3.276000] ACPI: Thermal Zone [THR1] (28 C)
[    3.280000] Time: hpet clocksource has been installed.
[    3.584000] usbcore: registered new interface driver usbfs
[    3.584000] usbcore: registered new interface driver hub
[    3.584000] usbcore: registered new device driver usb
[    3.584000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[    3.584000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.584000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.584000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.584000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.584000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.584000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
[    3.588000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.596000] usb usb1: configuration #1 chosen from 1 choice
[    3.596000] hub 1-0:1.0: USB hub found
[    3.596000] hub 1-0:1.0: 8 ports detected
[    3.608000] USB Universal Host Controller Interface driver v3.0
[    3.664000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[    3.664000] Copyright (c) 1999-2006 Intel Corporation.
[    3.668000] SCSI subsystem initialized
[    3.672000] libata version 2.20 loaded.
[    3.700000] ieee1394: Initialized config rom entry `ip1394'
[    3.704000] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[    3.704000] PCI: Setting latency timer of device 0000:07:05.0 to 64
[    3.756000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    3.768000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[    3.768000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.768000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.768000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.768000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[    3.768000] usb usb2: configuration #1 chosen from 1 choice
[    3.768000] hub 2-0:1.0: USB hub found
[    3.768000] hub 2-0:1.0: 2 ports detected
[    3.872000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[    3.872000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.872000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.872000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.872000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[    3.872000] usb usb3: configuration #1 chosen from 1 choice
[    3.872000] hub 3-0:1.0: USB hub found
[    3.872000] hub 3-0:1.0: 2 ports detected
[    3.940000] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    3.976000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.976000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.976000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.976000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.976000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    3.976000] usb usb4: configuration #1 chosen from 1 choice
[    3.976000] hub 4-0:1.0: USB hub found
[    3.976000] hub 4-0:1.0: 2 ports detected
[    4.080000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    4.080000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    4.080000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.080000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    4.080000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    4.080000] usb usb5: configuration #1 chosen from 1 choice
[    4.080000] hub 5-0:1.0: USB hub found
[    4.080000] hub 5-0:1.0: 2 ports detected
[    4.080000] usb 1-4: configuration #1 chosen from 1 choice
[    4.184000] ahci 0000:00:1f.2: version 2.1
[    4.184000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[    5.032000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[009fc0004a18c600]
[    5.188000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    5.188000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    5.188000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    5.188000] ata1: SATA max UDMA/133 cmd 0xf8864500 ctl 0x00000000 bmdma 0x00000000 irq 20
[    5.188000] ata2: SATA max UDMA/133 cmd 0xf8864580 ctl 0x00000000 bmdma 0x00000000 irq 20
[    5.188000] ata3: SATA max UDMA/133 cmd 0xf8864600 ctl 0x00000000 bmdma 0x00000000 irq 20
[    5.188000] ata4: SATA max UDMA/133 cmd 0xf8864680 ctl 0x00000000 bmdma 0x00000000 irq 20
[    5.188000] scsi0 : ahci
[    5.672000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.672000] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
[    5.672000] ata1.00: 234441648 sectors, multi 16: LBA48
[    5.672000] ata1.00: configured for UDMA/100
[    5.672000] scsi1 : ahci
[    5.984000] ata2: SATA link down (SStatus 0 SControl 0)
[    5.984000] scsi2 : ahci
[    6.296000] ata3: SATA link down (SStatus 0 SControl 300)
[    6.296000] scsi3 : ahci
[    6.608000] ata4: SATA link down (SStatus 0 SControl 0)
[    6.608000] scsi 0:0:0:0: Direct-Access    ATA      FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[    6.608000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[    6.608000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[    6.616000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[    6.616000] sda: Write Protect is off
[    6.616000] sda: Mode Sense: 00 3a 00 00
[    6.616000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.616000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[    6.616000] sda: Write Protect is off
[    6.616000] sda: Mode Sense: 00 3a 00 00
[    6.616000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.616000]  sda:<6>e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:a7:0e:d9
[    6.700000]  sda1 sda2 sda3
[    6.708000] sd 0:0:0:0: Attached scsi disk sda
[    6.712000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.728000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    6.732000] ata_piix 0000:00:1f.1: version 2.10ac1
[    6.732000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    6.732000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    6.732000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
[    6.732000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
[    6.732000] scsi4 : ata_piix
[    6.940000] Attempting manual resume
[    6.940000] swsusp: Resume From Partition 8:2
[    6.940000] PM: Checking swsusp image.
[    6.940000] PM: Resume from disk failed.
[    6.976000] kjournald starting.  Commit interval 5 seconds
[    6.976000] EXT3-fs: mounted filesystem with ordered data mode.
[    7.052000] ata5.00: ATAPI, max MWDMA2
[    7.216000] ata5.00: configured for MWDMA2
[    7.216000] scsi5 : ata_piix
[    7.216000] ata6: port disabled. ignoring.
[    7.216000] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.05 PQ: 0 ANSI: 5
[    7.216000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[  15.132000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
[  15.924000] Linux agpgart interface v0.102 (c) Dave Jones
[  15.932000] agpgart: Detected an Intel 945GM Chipset.
[  15.948000] agpgart: AGP aperture is 256M @ 0x0
[  16.076000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  16.084000] shpchp: Unknown symbol acpi_run_oshp
[  16.084000] shpchp: Unknown symbol pci_hp_change_slot_info
[  16.084000] shpchp: Unknown symbol pci_hp_register
[  16.084000] shpchp: Unknown symbol pci_hp_deregister
[  16.084000] shpchp: Unknown symbol acpi_get_hp_params_from_firmware
[  16.084000] shpchp: Unknown symbol acpi_run_oshp
[  16.084000] shpchp: Unknown symbol pci_hp_change_slot_info
[  16.084000] shpchp: Unknown symbol pci_hp_register
[  16.084000] shpchp: Unknown symbol pci_hp_deregister
[  16.084000] shpchp: Unknown symbol acpi_get_hp_params_from_firmware
[  16.120000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  16.472000] NET: Registered protocol family 17
[  16.484000] iTCO_vendor_support: vendor-support=0
[  16.488000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[  16.632000] ieee80211_crypt: registered algorithm 'NULL'
[  16.644000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[  16.644000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[  16.656000] Linux video capture interface: v2.00
[  16.712000] sdhci: Secure Digital Host Controller Interface driver
[  16.712000] sdhci: Copyright(c) Pierre Ossman
[  16.712000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[  16.712000] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[  16.712000] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
[  16.712000] PCI: Setting latency timer of device 0000:07:05.1 to 64
[  16.712000] mmc0: SDHCI at 0xde000800 irq 17 DMA
[  16.824000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[  16.824000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[  16.824000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  16.824000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  16.824000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[  16.956000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[  16.972000] sr0: scsi3-mmc drive: 47x/47x writer dvd-ram cd/rw xa/form2 cdda tray
[  16.972000] Uniform CD-ROM driver Revision: 3.20
[  16.972000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[  16.992000] nvidia: module license 'NVIDIA' taints kernel.
[  17.012000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[  17.012000] usbcore: registered new interface driver uvcvideo
[  17.012000] USB Video Class driver (v0.1.0)
[  17.244000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[  17.244000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  17.244000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[  17.244000] NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
[  17.260000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[  17.260000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  17.316000] intel_rng: FWH not detected
[  17.416000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[  17.416000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  17.728000] fuse init (API version 7.
[  17.776000] lp: driver loaded but no devices found
[  17.872000] Adding 979956k swap on /dev/disk/by-uuid/a74cb0f8-4990-48dc-b8c8-ae9b2bc7b736.  Priority:-1 extents:1 across:979956k
[  17.992000] EXT3 FS on sda1, internal journal
[  18.220000] kjournald starting.  Commit interval 5 seconds
[  18.220000] EXT3 FS on sda3, internal journal
[  18.220000] EXT3-fs: mounted filesystem with ordered data mode.
[  18.780000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[  72.116000] No dock devices found.
[  72.144000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  72.144000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  72.156000] input: Power Button (FF) as /class/input/input3
[  72.156000] ACPI: Power Button (FF) [PWRF]
[  72.156000] input: Power Button (CM) as /class/input/input4
[  72.156000] ACPI: Power Button (CM) [PWRB]
[  72.156000] input: Sleep Button (CM) as /class/input/input5
[  72.156000] ACPI: Sleep Button (CM) [SLPB]
[  72.156000] input: Lid Switch as /class/input/input6
[  72.156000] ACPI: Lid Switch [LID]
[  72.248000] ACPI: AC Adapter [ACAD] (on-line)
[  72.320000] ACPI: Battery Slot [BAT0] (battery present)
[  72.352000] Using specific hotkey driver
[  72.396000] ibm_acpi: ec object not found
[  72.480000] pcc_acpi: loading...
[  72.508000] wmi_add device=df8c8c00
[  72.508000] calling WQBA
[  78.692000] ppdev: user-space parallel port driver
[  80.800000] apm: BIOS not found.
[  81.084000] Bluetooth: Core ver 2.11
[  81.084000] NET: Registered protocol family 31
[  81.084000] Bluetooth: HCI device and connection manager initialized
[  81.084000] Bluetooth: HCI socket layer initialized
[  81.092000] Bluetooth: L2CAP ver 2.8
[  81.092000] Bluetooth: L2CAP socket layer initialized
[  81.236000] Bluetooth: RFCOMM socket layer initialized
[  81.236000] Bluetooth: RFCOMM TTY layer initialized
[  81.236000] Bluetooth: RFCOMM ver 1.8
[  536.060000] NET: Registered protocol family 10
[  536.060000] lo: Disabled Privacy Extensions
[  536.060000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  536.060000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  541.268000] UDF-fs: No VRS found
[  542.296000] ISO 9660 Extensions: Microsoft Joliet Level 3
[  542.616000] ISOFS: changing to secondary root
[  607.440000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  607.472000] ieee80211_crypt: registered algorithm 'TKIP'
[  629.304000] eth1: no IPv6 routers present
[ 3030.988000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 4165.316000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 5275.404000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 6468.824000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 7784.528000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 8283.040000] ipw3945: Radio Frequency Kill Switch is On:
[ 8283.040000] Kill switch must be turned off for wireless networking to work.
[11298.392000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[11298.556000] usb 3-1: configuration #1 chosen from 1 choice
[11298.928000] usbcore: registered new interface driver hiddev
[11298.940000] input: USB Mouse as /class/input/input7
[11298.940000] input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.1-1
[11298.940000] usbcore: registered new interface driver usbhid
[11298.940000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[11317.932000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[11453.568000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[11453.752000] usb 2-1: configuration #1 chosen from 1 choice
[12269.860000] usb 2-1: USB disconnect, address 2
[12412.372000] usbcore: registered new interface driver ov51x
[12412.372000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: 1.5.2 : ov51x USB Camera Driver
[12811.848000] usb 2-1: new full speed USB device using uhci_hcd and address 3
[12812.032000] usb 2-1: configuration #1 chosen from 1 choice
[12812.036000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: USB OV519 video device found
[12812.392000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Sensor is an OV7670
[12813.032000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Device at usb-0000:00:1d.0-1 registered to minor 1
[12926.524000] usb 3-1: USB disconnect, address 2
[13426.240000] usb 2-1: USB disconnect, address 3
[13436.436000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[14352.828000] usb 2-1: new full speed USB device using uhci_hcd and address 4
[14353.016000] usb 2-1: configuration #1 chosen from 1 choice
[14353.020000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: USB OV519 video device found
[14353.372000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Sensor is an OV7670
[14354.012000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Device at usb-0000:00:1d.0-1 registered to minor 1
[14375.256000] usb 3-1: new low speed USB device using uhci_hcd and address 3
[14375.420000] usb 3-1: configuration #1 chosen from 1 choice
[14375.436000] input: USB Mouse as /class/input/input8
[14375.436000] input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.1-1
[15194.776000] usb 2-1: USB disconnect, address 4
[15202.084000] usb 3-1: USB disconnect, address 3
[15415.612000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[16274.328000] usb 2-1: new full speed USB device using uhci_hcd and address 5
[16274.568000] usb 2-1: configuration #1 chosen from 1 choice
[16274.572000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: USB OV519 video device found
[16274.928000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Sensor is an OV7670
[16275.568000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Device at usb-0000:00:1d.0-1 registered to minor 1
milos@milos-laptop:~$

ls /dev/video* mi da:
/dev/video0  /dev/video1


milos@milos-laptop:~$ lsmod
Module                  Size  Used by
ov51x_jpeg            153208  0
usbhid                26592  0
hid                    27392  1 usbhid
michael_mic            3584  6
arc4                    2944  6
ecb                    4480  6
blkcipher              6784  1 ecb
ieee80211_crypt_tkip    12032  3
nls_cp437              6784  0
isofs                  36284  0
udf                    85252  0
ipv6                  268960  12
binfmt_misc            12680  1
rfcomm                40856  0
l2cap                  25856  5 rfcomm
bluetooth              55908  4 rfcomm,l2cap
ppdev                  10116  0
acpi_cpufreq          10056  0
cpufreq_conservative    8200  0
cpufreq_userspace      5408  0
cpufreq_stats          7360  0
cpufreq_powersave      2688  0
cpufreq_ondemand        9228  2
freq_table              5792  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
tc1100_wmi              8068  0
sony_acpi              6284  0
dev_acpi              12292  0
pcc_acpi              13184  0
sbs                    15652  0
container              5248  0
asus_acpi              17308  0
battery                10756  0
ac                      6020  0
button                  8720  0
video                  16388  0
i2c_ec                  6016  1 sbs
dock                  10268  0
backlight              7040  1 asus_acpi
sbp2                  23812  0
parport_pc            36388  0
lp                    12452  0
parport                36936  3 ppdev,parport_pc,lp
fuse                  46612  0
snd_hda_intel          21912  2
snd_hda_codec        205056  1 snd_hda_intel
snd_pcm_oss            44544  0
snd_mixer_oss          17408  2 snd_pcm_oss
joydev                10816  0
snd_pcm                79876  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy          4740  0
snd_seq_oss            32896  0
nvidia              6837140  22
sr_mod                17060  0
snd_seq_midi            9600  0
snd_rawmidi            25472  1 snd_seq_midi
snd_seq_midi_event      8448  2 snd_seq_oss,snd_seq_midi
uvcvideo              47236  0
cdrom                  37664  1 sr_mod
ipw3945              118816  1
compat_ioctl32          2304  1 uvcvideo
i2c_core              22656  2 i2c_ec,nvidia
snd_seq                52592  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              23684  2 snd_pcm,snd_seq
snd_seq_device          9100  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
sdhci                  18700  0
videodev              28160  2 ov51x_jpeg,uvcvideo
v4l1_compat            15236  2 uvcvideo,videodev
ieee80211              34760  1 ipw3945
ieee80211_crypt        7040  2 ieee80211_crypt_tkip,ieee80211
serio_raw              7940  0
mmc_core              26756  1 sdhci
v4l2_common            25216  2 uvcvideo,videodev
iTCO_wdt              11812  0
iTCO_vendor_support    4868  1 iTCO_wdt
af_packet              23816  8
snd                    54020  12 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              8672  2 snd
psmouse                38920  0
snd_page_alloc        10888  2 snd_hda_intel,snd_pcm
shpchp                34324  0
pci_hotplug            32576  1 shpchp
intel_agp              25244  1
agpgart                35400  2 nvidia,intel_agp
tsdev                  8768  0
evdev                  11008  5
ext3                  133128  2
jbd                    59816  1 ext3
mbcache                9604  1 ext3
ata_piix              15492  0
sg                    36252  0
sd_mod                23428  4
ata_generic            9092  0
ohci1394              36528  0
ieee1394              299448  2 sbp2,ohci1394
ahci                  22020  3
libata                125720  3 ata_piix,ata_generic,ahci
scsi_mod              142348  5 sbp2,sr_mod,sg,sd_mod,libata
e1000                126016  0
generic                5124  0 [permanent]
uhci_hcd              25360  0
ehci_hcd              34188  0
usbcore              134280  6 ov51x_jpeg,usbhid,uvcvideo,uhci_hcd,ehci_hcd
thermal                14856  0
processor              31048  2 acpi_cpufreq,thermal
fan                    5636  0
fbcon                  42656  0
tileblit                3584  1 fbcon
font                    9216  1 fbcon
bitblit                6912  1 fbcon
softcursor              3200  1 bitblit
vesafb                  9220  0
capability              5896  0
commoncap              8192  1 capability
milos@milos-laptop:~$


CONTO VERAMENTE SUL VOSTRO AIUTO GRAZIE MILLE PER L'INTERESSAMENTO

[simo_magic]

ti prego modifica quel post...seleziona tutto l'anbaradan e clicca sul pulsante con il #

[Milos]

non capisco cosa devo fare e nonc apisco perhcè è in grassetto

[simo_magic]

questo!!!!!!!!!!
l'output deve venire fuori così!!!

Codice: Seleziona tutto

aaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaa

[Milos]

ma dove sta sto pulsante ragazzo non lo trovo.. vi cambia tanto???

[simo_magic]

si che cambia...la leggibilità del topic cambierà parecchio!!!
più che allegarti una immagine non so che fare...

[Milos]

dmesg mi da questo:

Codice: Seleziona tutto

[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 252 pages used for memmap
[    0.000000]   HighMem zone: 32116 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 HP                                    ) @ 0x000f7de0
[    0.000000] ACPI: RSDT (v001 HP     30BC     0x06040000  LTP 0x00000000) @ 0x3fe7deab
[    0.000000] ACPI: FADT (v001 HP     30BC     0x06040000 LOHR 0x0000005a) @ 0x3fe85dee
[    0.000000] ACPI: MADT (v001 HP     30BC     0x06040000 LOHR 0x0000005a) @ 0x3fe85e62
[    0.000000] ACPI: HPET (v001 HP     30BC     0x06040000 LOHR 0x0000005a) @ 0x3fe85eca
[    0.000000] ACPI: MCFG (v001 HP     30BC     0x06040000 LOHR 0x0000005a) @ 0x3fe85f02
[    0.000000] ACPI: BOOT (v001 HP     30BC     0x06040000  LTP 0x00000001) @ 0x3fe85fd8
[    0.000000] ACPI: MADT (v001 HP     30BC     0x06040000  LTP 0x00000000) @ 0x3fe85f70
[    0.000000] ACPI: SSDT (v001  HP    30BC     0x00001000 INTL 0x20050624) @ 0x3fe7e8bf
[    0.000000] ACPI: SSDT (v001 HP     30BC     0x00003000 INTL 0x20050624) @ 0x3fe7deef
[    0.000000] ACPI: DSDT (v001 HP     30BC     0x06040000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: 2 duplicate APIC table ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:14 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] Detected 1729.774 MHz processor.
[   26.778128] Built 1 zonelists.  Total pages: 259700
[   26.778132] Kernel command line: root=UUID=2e01162d-6220-4df8-a0c5-191c67feb0fb ro quiet splash locale=it_IT
[   26.778295] mapped APIC to ffffd000 (fee00000)
[   26.778298] mapped IOAPIC to ffffc000 (fec00000)
[   26.778300] Enabling fast FPU save and restore... done.
[   26.778303] Enabling unmasked SIMD FPU exception support... done.
[   26.778311] Initializing CPU#0
[   26.778384] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   26.780824] Console: colour VGA+ 80x25
[   26.781122] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   26.781498] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   26.809996] Memory: 1026796k/1046976k available (1992k kernel code, 19512k reserved, 900k data, 328k init, 129472k highmem)
[   26.810005] virtual kernel memory layout:
[   26.810006]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   26.810008]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   26.810009]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   26.810010]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   26.810012]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   26.810013]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   26.810014]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   26.810018] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   26.810181] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   26.810186] hpet0: 3 64-bit timers, 14318180 Hz
[   26.811191] Using HPET for base-timer
[   26.890040] Calibrating delay using timer specific routine.. 3463.01 BogoMIPS (lpj=6926037)
[   26.890078] Security Framework v1.0.0 initialized
[   26.890085] SELinux:  Disabled at boot.
[   26.890100] Mount-cache hash table entries: 512
[   26.890223] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[   26.890232] monitor/mwait feature present.
[   26.890234] using mwait in idle threads.
[   26.890238] CPU: L1 I cache: 32K, L1 D cache: 32K
[   26.890240] CPU: L2 cache: 2048K
[   26.890243] CPU: Physical Processor ID: 0
[   26.890245] CPU: Processor Core ID: 0
[   26.890247] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[   26.890256] Compat vDSO mapped to ffffe000.
[   26.890259] Remapping vsyscall page to ffffe000
[   26.890271] Checking 'hlt' instruction... OK.
[   26.906106] SMP alternatives: switching to UP code
[   26.906445] Early unpacking initramfs... done
[   27.235288] ACPI: Core revision 20060707
[   27.235513] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   27.241637] CPU0: Intel Genuine Intel(R) CPU           T2250  @ 1.73GHz stepping 08
[   27.241657] SMP alternatives: switching to SMP code
[   27.241782] Booting processor 1/1 eip 3000
[   27.252200] Initializing CPU#1
[   27.329243] Calibrating delay using timer specific routine.. 3459.15 BogoMIPS (lpj=6918315)
[   27.329250] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[   27.329255] monitor/mwait feature present.
[   27.329259] CPU: L1 I cache: 32K, L1 D cache: 32K
[   27.329261] CPU: L2 cache: 2048K
[   27.329263] CPU: Physical Processor ID: 0
[   27.329264] CPU: Processor Core ID: 1
[   27.329266] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[   27.329718] CPU1: Intel Genuine Intel(R) CPU           T2250  @ 1.73GHz stepping 08
[   27.329742] Total of 2 processors activated (6922.17 BogoMIPS).
[   27.329942] ENABLING IO-APIC IRQs
[   27.330149] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   27.476974] checking TSC synchronization across 2 CPUs: passed.
[    0.003996] Brought up 2 CPUs
[    0.232263] migration_cost=59
[    0.232546] Booting paravirtualized kernel on bare hardware
[    0.232646] Time:  7:35:15  Date: 06/26/107
[    0.232676] NET: Registered protocol family 16
[    0.232761] EISA bus registered
[    0.232766] ACPI: bus type pci registered
[    0.232917] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
[    0.232920] PCI: Using configuration type 1
[    0.232922] Setting up standard PCI resources
[    0.236528] ACPI: Interpreter enabled
[    0.236530] ACPI: Using IOAPIC for interrupt routing
[    0.237203] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.237209] PCI: Probing PCI hardware (bus 00)
[    0.238614] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.238619] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.238902] Boot video device is 0000:01:00.0
[    0.240074] PCI: Transparent bridge - 0000:00:1e.0
[    0.240162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.246917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.247877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.248128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.248395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.249247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.249797] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.250064] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[    0.250331] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[    0.250597] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[    0.250861] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[    0.251124] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[    0.251390] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[    0.251667] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[    0.252955] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.252966] pnp: PnP ACPI init
[    0.255127] pnp: PnP ACPI: found 10 devices
[    0.255131] PnPBIOS: Disabled by ACPI PNP
[    0.255173] PCI: Using ACPI for IRQ routing
[    0.255175] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.284175] NET: Registered protocol family 8
[    0.284177] NET: Registered protocol family 20
[    0.284483] pnp: 00:06: ioport range 0x6a0-0x6af has been reserved
[    0.284486] pnp: 00:06: ioport range 0x6b0-0x6ff has been reserved
[    0.284788] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[    0.284854] PCI: Bridge: 0000:00:01.0
[    0.284855]   IO window: disabled.
[    0.284859]   MEM window: dc000000-ddffffff
[    0.284863]   PREFETCH window: c0000000-cfffffff
[    0.284866] PCI: Bridge: 0000:00:1c.0
[    0.284870]   IO window: 2000-2fff
[    0.284876]   MEM window: d8000000-d9ffffff
[    0.284881]   PREFETCH window: d2000000-d3ffffff
[    0.284887] PCI: Bridge: 0000:00:1c.1
[    0.284890]   IO window: 3000-3fff
[    0.284896]   MEM window: d6000000-d7ffffff
[    0.284901]   PREFETCH window: d0000000-d1ffffff
[    0.284907] PCI: Bridge: 0000:00:1c.2
[    0.284910]   IO window: 4000-4fff
[    0.284916]   MEM window: da000000-dbffffff
[    0.284921]   PREFETCH window: d4000000-d5ffffff
[    0.284927] PCI: Bridge: 0000:00:1e.0
[    0.284929]   IO window: disabled.
[    0.284935]   MEM window: de000000-de0fffff
[    0.284939]   PREFETCH window: disabled.
[    0.284957] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.284962] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.284986] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.284992] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.285015] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 16
[    0.285021] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.285045] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.285051] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.285063] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[    0.285069] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.285098] NET: Registered protocol family 2
[    0.339433] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.339540] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.340250] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.340611] TCP: Hash tables configured (established 131072 bind 65536)
[    0.340614] TCP reno registered
[    0.355483] checking if image is initramfs... it is
[    0.998787] Freeing initrd memory: 6789k freed
[    0.998965] Simple Boot Flag at 0x35 set to 0x1
[    0.999424] audit: initializing netlink socket (disabled)
[    0.999440] audit(1185435315.748:1): initialized
[    0.999538] highmem bounce pool size: 64 pages
[    0.999626] VFS: Disk quotas dquot_6.5.1
[    0.999646] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.999696] io scheduler noop registered
[    0.999699] io scheduler anticipatory registered
[    0.999701] io scheduler deadline registered
[    0.999713] io scheduler cfq registered (default)
[    0.999971] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    1.000008] assign_interrupt_mode Found MSI capability
[    1.000011] Allocate Port Service[0000:00:01.0:pcie00]
[    1.000101] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.000159] assign_interrupt_mode Found MSI capability
[    1.000162] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.000197] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.000318] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.000377] assign_interrupt_mode Found MSI capability
[    1.000379] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.000411] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.000532] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.000590] assign_interrupt_mode Found MSI capability
[    1.000593] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.000625] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.000804] isapnp: Scanning for PnP cards...
[    1.354092] isapnp: No Plug & Play device found
[    1.376560] Real Time Clock Driver v1.12ac
[    1.376617] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.377231] mice: PS/2 mouse device common for all mice
[    1.377787] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.378010] input: Macintosh mouse button emulation as /class/input/input0
[    1.378042] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.378046] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.378331] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.395216] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.395220] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.396376] EISA: Probing bus 0 at eisa.0
[    1.396385] Cannot allocate resource for EISA slot 1
[    1.396389] Cannot allocate resource for EISA slot 2
[    1.396391] Cannot allocate resource for EISA slot 3
[    1.396394] Cannot allocate resource for EISA slot 4
[    1.396413] EISA: Detected 0 cards.
[    1.426460] TCP cubic registered
[    1.426469] NET: Registered protocol family 1
[    1.426491] Starting balanced_irq
[    1.426497] Using IPI No-Shortcut mode
[    1.426610] ACPI: (supports S0 S3 S4 S5)
[    1.426658]   Magic number: 15:728:572
[    1.426715]   hash matches device ptyb4
[    1.426952] Freeing unused kernel memory: 328k freed
[    1.429411] Time: tsc clocksource has been installed.
[    1.434343] input: AT Translated Set 2 keyboard as /class/input/input1
[    2.669112] Capability LSM initialized
[    2.702864] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [30BC    ] [20060707]
[    2.703075] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [30BC    ] [20060707]
[    2.703324] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.703329] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.703825] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [30BC    ] [20060707]
[    2.704018] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [30BC    ] [20060707]
[    2.704316] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    2.704322] ACPI: Processor [CPU1] (supports 8 throttling states)
[    3.276000] ACPI: Thermal Zone [THR1] (28 C)
[    3.280000] Time: hpet clocksource has been installed.
[    3.584000] usbcore: registered new interface driver usbfs
[    3.584000] usbcore: registered new interface driver hub
[    3.584000] usbcore: registered new device driver usb
[    3.584000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[    3.584000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.584000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.584000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.584000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.584000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.584000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
[    3.588000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.596000] usb usb1: configuration #1 chosen from 1 choice
[    3.596000] hub 1-0:1.0: USB hub found
[    3.596000] hub 1-0:1.0: 8 ports detected
[    3.608000] USB Universal Host Controller Interface driver v3.0
[    3.664000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[    3.664000] Copyright (c) 1999-2006 Intel Corporation.
[    3.668000] SCSI subsystem initialized
[    3.672000] libata version 2.20 loaded.
[    3.700000] ieee1394: Initialized config rom entry `ip1394'
[    3.704000] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[    3.704000] PCI: Setting latency timer of device 0000:07:05.0 to 64
[    3.756000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    3.768000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[    3.768000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.768000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.768000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.768000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[    3.768000] usb usb2: configuration #1 chosen from 1 choice
[    3.768000] hub 2-0:1.0: USB hub found
[    3.768000] hub 2-0:1.0: 2 ports detected
[    3.872000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 20
[    3.872000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.872000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.872000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.872000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[    3.872000] usb usb3: configuration #1 chosen from 1 choice
[    3.872000] hub 3-0:1.0: USB hub found
[    3.872000] hub 3-0:1.0: 2 ports detected
[    3.940000] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    3.976000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.976000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.976000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.976000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.976000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    3.976000] usb usb4: configuration #1 chosen from 1 choice
[    3.976000] hub 4-0:1.0: USB hub found
[    3.976000] hub 4-0:1.0: 2 ports detected
[    4.080000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    4.080000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    4.080000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.080000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    4.080000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    4.080000] usb usb5: configuration #1 chosen from 1 choice
[    4.080000] hub 5-0:1.0: USB hub found
[    4.080000] hub 5-0:1.0: 2 ports detected
[    4.080000] usb 1-4: configuration #1 chosen from 1 choice
[    4.184000] ahci 0000:00:1f.2: version 2.1
[    4.184000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 20
[    5.032000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[009fc0004a18c600]
[    5.188000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    5.188000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    5.188000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    5.188000] ata1: SATA max UDMA/133 cmd 0xf8864500 ctl 0x00000000 bmdma 0x00000000 irq 20
[    5.188000] ata2: SATA max UDMA/133 cmd 0xf8864580 ctl 0x00000000 bmdma 0x00000000 irq 20
[    5.188000] ata3: SATA max UDMA/133 cmd 0xf8864600 ctl 0x00000000 bmdma 0x00000000 irq 20
[    5.188000] ata4: SATA max UDMA/133 cmd 0xf8864680 ctl 0x00000000 bmdma 0x00000000 irq 20
[    5.188000] scsi0 : ahci
[    5.672000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.672000] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
[    5.672000] ata1.00: 234441648 sectors, multi 16: LBA48
[    5.672000] ata1.00: configured for UDMA/100
[    5.672000] scsi1 : ahci
[    5.984000] ata2: SATA link down (SStatus 0 SControl 0)
[    5.984000] scsi2 : ahci
[    6.296000] ata3: SATA link down (SStatus 0 SControl 300)
[    6.296000] scsi3 : ahci
[    6.608000] ata4: SATA link down (SStatus 0 SControl 0)
[    6.608000] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[    6.608000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[    6.608000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[    6.616000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[    6.616000] sda: Write Protect is off
[    6.616000] sda: Mode Sense: 00 3a 00 00
[    6.616000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.616000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[    6.616000] sda: Write Protect is off
[    6.616000] sda: Mode Sense: 00 3a 00 00
[    6.616000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.616000]  sda:<6>e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:a7:0e:d9
[    6.700000]  sda1 sda2 sda3
[    6.708000] sd 0:0:0:0: Attached scsi disk sda
[    6.712000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.728000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    6.732000] ata_piix 0000:00:1f.1: version 2.10ac1
[    6.732000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    6.732000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    6.732000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
[    6.732000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
[    6.732000] scsi4 : ata_piix
[    6.940000] Attempting manual resume
[    6.940000] swsusp: Resume From Partition 8:2
[    6.940000] PM: Checking swsusp image.
[    6.940000] PM: Resume from disk failed.
[    6.976000] kjournald starting.  Commit interval 5 seconds
[    6.976000] EXT3-fs: mounted filesystem with ordered data mode.
[    7.052000] ata5.00: ATAPI, max MWDMA2
[    7.216000] ata5.00: configured for MWDMA2
[    7.216000] scsi5 : ata_piix
[    7.216000] ata6: port disabled. ignoring.
[    7.216000] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.05 PQ: 0 ANSI: 5
[    7.216000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[   15.132000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
[   15.924000] Linux agpgart interface v0.102 (c) Dave Jones
[   15.932000] agpgart: Detected an Intel 945GM Chipset.
[   15.948000] agpgart: AGP aperture is 256M @ 0x0
[   16.076000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   16.084000] shpchp: Unknown symbol acpi_run_oshp
[   16.084000] shpchp: Unknown symbol pci_hp_change_slot_info
[   16.084000] shpchp: Unknown symbol pci_hp_register
[   16.084000] shpchp: Unknown symbol pci_hp_deregister
[   16.084000] shpchp: Unknown symbol acpi_get_hp_params_from_firmware
[   16.084000] shpchp: Unknown symbol acpi_run_oshp
[   16.084000] shpchp: Unknown symbol pci_hp_change_slot_info
[   16.084000] shpchp: Unknown symbol pci_hp_register
[   16.084000] shpchp: Unknown symbol pci_hp_deregister
[   16.084000] shpchp: Unknown symbol acpi_get_hp_params_from_firmware
[   16.120000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.472000] NET: Registered protocol family 17
[   16.484000] iTCO_vendor_support: vendor-support=0
[   16.488000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   16.632000] ieee80211_crypt: registered algorithm 'NULL'
[   16.644000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   16.644000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   16.656000] Linux video capture interface: v2.00
[   16.712000] sdhci: Secure Digital Host Controller Interface driver
[   16.712000] sdhci: Copyright(c) Pierre Ossman
[   16.712000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[   16.712000] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[   16.712000] ACPI: PCI Interrupt 0000:07:05.1 -> GSI 17 (level, low) -> IRQ 17
[   16.712000] PCI: Setting latency timer of device 0000:07:05.1 to 64
[   16.712000] mmc0: SDHCI at 0xde000800 irq 17 DMA
[   16.824000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[   16.824000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   16.824000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   16.824000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   16.824000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   16.956000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[   16.972000] sr0: scsi3-mmc drive: 47x/47x writer dvd-ram cd/rw xa/form2 cdda tray
[   16.972000] Uniform CD-ROM driver Revision: 3.20
[   16.972000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   16.992000] nvidia: module license 'NVIDIA' taints kernel.
[   17.012000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[   17.012000] usbcore: registered new interface driver uvcvideo
[   17.012000] USB Video Class driver (v0.1.0)
[   17.244000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[   17.244000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   17.244000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   17.244000] NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
[   17.260000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   17.260000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   17.316000] intel_rng: FWH not detected
[   17.416000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   17.416000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   17.728000] fuse init (API version 7.Cool
[   17.776000] lp: driver loaded but no devices found
[   17.872000] Adding 979956k swap on /dev/disk/by-uuid/a74cb0f8-4990-48dc-b8c8-ae9b2bc7b736.  Priority:-1 extents:1 across:979956k
[   17.992000] EXT3 FS on sda1, internal journal
[   18.220000] kjournald starting.  Commit interval 5 seconds
[   18.220000] EXT3 FS on sda3, internal journal
[   18.220000] EXT3-fs: mounted filesystem with ordered data mode.
[   18.780000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[   72.116000] No dock devices found.
[   72.144000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   72.144000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   72.156000] input: Power Button (FF) as /class/input/input3
[   72.156000] ACPI: Power Button (FF) [PWRF]
[   72.156000] input: Power Button (CM) as /class/input/input4
[   72.156000] ACPI: Power Button (CM) [PWRB]
[   72.156000] input: Sleep Button (CM) as /class/input/input5
[   72.156000] ACPI: Sleep Button (CM) [SLPB]
[   72.156000] input: Lid Switch as /class/input/input6
[   72.156000] ACPI: Lid Switch [LID]
[   72.248000] ACPI: AC Adapter [ACAD] (on-line)
[   72.320000] ACPI: Battery Slot [BAT0] (battery present)
[   72.352000] Using specific hotkey driver
[   72.396000] ibm_acpi: ec object not found
[   72.480000] pcc_acpi: loading...
[   72.508000] wmi_add device=df8c8c00
[   72.508000] calling WQBA
[   78.692000] ppdev: user-space parallel port driver
[   80.800000] apm: BIOS not found.
[   81.084000] Bluetooth: Core ver 2.11
[   81.084000] NET: Registered protocol family 31
[   81.084000] Bluetooth: HCI device and connection manager initialized
[   81.084000] Bluetooth: HCI socket layer initialized
[   81.092000] Bluetooth: L2CAP ver 2.8
[   81.092000] Bluetooth: L2CAP socket layer initialized
[   81.236000] Bluetooth: RFCOMM socket layer initialized
[   81.236000] Bluetooth: RFCOMM TTY layer initialized
[   81.236000] Bluetooth: RFCOMM ver 1.8
[  536.060000] NET: Registered protocol family 10
[  536.060000] lo: Disabled Privacy Extensions
[  536.060000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  536.060000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  541.268000] UDF-fs: No VRS found
[  542.296000] ISO 9660 Extensions: Microsoft Joliet Level 3
[  542.616000] ISOFS: changing to secondary root
[  607.440000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  607.472000] ieee80211_crypt: registered algorithm 'TKIP'
[  629.304000] eth1: no IPv6 routers present
[ 3030.988000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 4165.316000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 5275.404000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 6468.824000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 7784.528000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[ 8283.040000] ipw3945: Radio Frequency Kill Switch is On:
[ 8283.040000] Kill switch must be turned off for wireless networking to work.
[11298.392000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[11298.556000] usb 3-1: configuration #1 chosen from 1 choice
[11298.928000] usbcore: registered new interface driver hiddev
[11298.940000] input: USB Mouse as /class/input/input7
[11298.940000] input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.1-1
[11298.940000] usbcore: registered new interface driver usbhid
[11298.940000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[11317.932000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[11453.568000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[11453.752000] usb 2-1: configuration #1 chosen from 1 choice
[12269.860000] usb 2-1: USB disconnect, address 2
[12412.372000] usbcore: registered new interface driver ov51x
[12412.372000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: 1.5.2 : ov51x USB Camera Driver
[12811.848000] usb 2-1: new full speed USB device using uhci_hcd and address 3
[12812.032000] usb 2-1: configuration #1 chosen from 1 choice
[12812.036000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: USB OV519 video device found
[12812.392000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Sensor is an OV7670
[12813.032000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Device at usb-0000:00:1d.0-1 registered to minor 1
[12926.524000] usb 3-1: USB disconnect, address 2
[13426.240000] usb 2-1: USB disconnect, address 3
[13436.436000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[14352.828000] usb 2-1: new full speed USB device using uhci_hcd and address 4
[14353.016000] usb 2-1: configuration #1 chosen from 1 choice
[14353.020000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: USB OV519 video device found
[14353.372000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Sensor is an OV7670
[14354.012000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Device at usb-0000:00:1d.0-1 registered to minor 1
[14375.256000] usb 3-1: new low speed USB device using uhci_hcd and address 3
[14375.420000] usb 3-1: configuration #1 chosen from 1 choice
[14375.436000] input: USB Mouse as /class/input/input8
[14375.436000] input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.1-1
[15194.776000] usb 2-1: USB disconnect, address 4
[15202.084000] usb 3-1: USB disconnect, address 3
[15415.612000] TKIP: ICV error detected: STA=00:18:4d:c1:66:9e
[16274.328000] usb 2-1: new full speed USB device using uhci_hcd and address 5
[16274.568000] usb 2-1: configuration #1 chosen from 1 choice
[16274.572000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: USB OV519 video device found
[16274.928000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Sensor is an OV7670
[16275.568000] /usr/src/modules/ov51x-jpeg/ov51x-jpeg-core.c: Device at usb-0000:00:1d.0-1 registered to minor 1
milos@milos-laptop:~$

ls /dev/video* mi da:

Codice: Seleziona tutto

/dev/video0  /dev/video1

milos@milos-laptop:~$ lsmod

Codice: Seleziona tutto

Module                  Size  Used by
ov51x_jpeg            153208  0
usbhid                 26592  0
hid                    27392  1 usbhid
michael_mic             3584  6
arc4                    2944  6
ecb                     4480  6
blkcipher               6784  1 ecb
ieee80211_crypt_tkip    12032  3
nls_cp437               6784  0
isofs                  36284  0
udf                    85252  0
ipv6                  268960  12
binfmt_misc            12680  1
rfcomm                 40856  0
l2cap                  25856  5 rfcomm
bluetooth              55908  4 rfcomm,l2cap
ppdev                  10116  0
acpi_cpufreq           10056  0
cpufreq_conservative     8200  0
cpufreq_userspace       5408  0
cpufreq_stats           7360  0
cpufreq_powersave       2688  0
cpufreq_ondemand        9228  2
freq_table              5792  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
tc1100_wmi              8068  0
sony_acpi               6284  0
dev_acpi               12292  0
pcc_acpi               13184  0
sbs                    15652  0
container               5248  0
asus_acpi              17308  0
battery                10756  0
ac                      6020  0
button                  8720  0
video                  16388  0
i2c_ec                  6016  1 sbs
dock                   10268  0
backlight               7040  1 asus_acpi
sbp2                   23812  0
parport_pc             36388  0
lp                     12452  0
parport                36936  3 ppdev,parport_pc,lp
fuse                   46612  0
snd_hda_intel          21912  2
snd_hda_codec         205056  1 snd_hda_intel
snd_pcm_oss            44544  0
snd_mixer_oss          17408  2 snd_pcm_oss
joydev                 10816  0
snd_pcm                79876  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           4740  0
snd_seq_oss            32896  0
nvidia               6837140  22
sr_mod                 17060  0
snd_seq_midi            9600  0
snd_rawmidi            25472  1 snd_seq_midi
snd_seq_midi_event      8448  2 snd_seq_oss,snd_seq_midi
uvcvideo               47236  0
cdrom                  37664  1 sr_mod
ipw3945               118816  1
compat_ioctl32          2304  1 uvcvideo
i2c_core               22656  2 i2c_ec,nvidia
snd_seq                52592  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              23684  2 snd_pcm,snd_seq
snd_seq_device          9100  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
sdhci                  18700  0
videodev               28160  2 ov51x_jpeg,uvcvideo
v4l1_compat            15236  2 uvcvideo,videodev
ieee80211              34760  1 ipw3945
ieee80211_crypt         7040  2 ieee80211_crypt_tkip,ieee80211
serio_raw               7940  0
mmc_core               26756  1 sdhci
v4l2_common            25216  2 uvcvideo,videodev
iTCO_wdt               11812  0
iTCO_vendor_support     4868  1 iTCO_wdt
af_packet              23816  8
snd                    54020  12 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               8672  2 snd
psmouse                38920  0
snd_page_alloc         10888  2 snd_hda_intel,snd_pcm
shpchp                 34324  0
pci_hotplug            32576  1 shpchp
intel_agp              25244  1
agpgart                35400  2 nvidia,intel_agp
tsdev                   8768  0
evdev                  11008  5
ext3                  133128  2
jbd                    59816  1 ext3
mbcache                 9604  1 ext3
ata_piix               15492  0
sg                     36252  0
sd_mod                 23428  4
ata_generic             9092  0
ohci1394               36528  0
ieee1394              299448  2 sbp2,ohci1394
ahci                   22020  3
libata                125720  3 ata_piix,ata_generic,ahci
scsi_mod              142348  5 sbp2,sr_mod,sg,sd_mod,libata
e1000                 126016  0
generic                 5124  0 [permanent]
uhci_hcd               25360  0
ehci_hcd               34188  0
usbcore               134280  6 ov51x_jpeg,usbhid,uvcvideo,uhci_hcd,ehci_hcd
thermal                14856  0
processor              31048  2 acpi_cpufreq,thermal
fan                     5636  0
fbcon                  42656  0
tileblit                3584  1 fbcon
font                    9216  1 fbcon
bitblit                 6912  1 fbcon
softcursor              3200  1 bitblit
vesafb                  9220  0
capability              5896  0
commoncap               8192  1 capability
milos@milos-laptop:~$

non avevo visto l'allegato

[granma]

Hai due webcam?

[Milos]

o sia la web microdia integrata che quella esterna ora che ho comprato... non so che dirvi appena attacco la creative mi si accende ma non so che fare perchè non funziona

[simo_magic]

ma io dicevo di modificare quello vecchio!  >:(
non crearne un'altro...

[christian88]

ho anche io la creative vista e ho risolto così:

collega la webcam al pc poi da terminale:

Codice: Seleziona tutto

sudo apt-get install subversion

poi

Codice: Seleziona tutto

svn co svn://rastageeks.org/svn/ov51x-jpeg/trunk webcam-driver

ora hai scaricato una cartella entraci con:

Codice: Seleziona tutto

cd webcam-driver

poi digita

Codice: Seleziona tutto

make

poi ancora

Codice: Seleziona tutto

sudo make install

rimuovi il file ov511 con

Codice: Seleziona tutto

rmmod ov511

carica il modulo installato:

Codice: Seleziona tutto

sudo modprobe ov51x-jpeg

adesso apri la webcam con camorama o con vlc

se apri con vlc fai:

Codice: Seleziona tutto

vlc v4l:/dev/video0

scudate per la lunghezza del post ma è abbastanza lungo il modo di installazione

poi fammi sapere se sei riuscito 

[Milos]

guarda sei stato veramente un dio cioè ora la web mi da il segnale rosso e se la apro con camstream mi funziona alla grande.. con camorama no e adesso ti spiego anche il motivo.. camorama riconosce ancora la vecchia web e praticamente appena non la trova non parte e si toglie.. come faccio io ad eliminare la vecchia web???? il dev0 devo toglierlo in modo che riconosce solo la nuova web non so se mi sono spiegato..

ora provo amsn

[christian88]

sinceramente io ho avuto problemi con camorama e perciò l'ho disinstallato tempo fa e quindi non so come aiutarti...se vuoi prova ad eliminare video0 ma non so se risolvi...io ti consiglio di eliminare camorama e di usare vlc o gqcam...

[Milos]

amsn non va non mi fa partire le videocomunicazioni aspetto semrpe come togliere la vecchia web

[christian88]

abbiamo postato quasi assieme, leggi il mio post precedente...comunque che amsn hai?