Notizia:
  • Rilasciata Precise Pangolin 12.04. Per ottenerla, visitate questa pagina, oppure provate il tour dal vivo con un browser web moderno.
  • Nuovo forum di Ubuntu-it, l'annuncio. È consigliato aggiornare il proprio profilo e controllare la sezione Gruppo Forum per problemi noti.
  • Rilasciata la versione italiana di Precise Pangolin 12.04. Per maggiori informazioni, consultare questa discussione.
  • Il vincitore del Concorso desktop del mese di aprile è Jerico. L'elenco dei precedenti vincitori è qui.
  • È uscito il numero 17 della Newsletter italiana di Ubuntu. Lo trovate a questo indirizzo.
  • È uscito il numero 59 di Full Circle Magazine in italiano. Lo trovate a questo indirizzo.

[ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze? [RISOLTO]

Personalizzazione grafica del sistema: icone, temi, sfondi, suoni, ecc.

[ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze? [RISOLTO]

Messaggioda ghandalf » martedì 31 ottobre 2006, 12:52

[edit]
Controllate il post numero 6
[/edit]

Buongiorno a tutto il forum.

Dopo anni di gentoo ho pensionato la mia vecchia distro per provare qualcosa di nuovo per uso desktop, non potevo non approdare ad UBUNTU..;)

Vengo al dunque, ho letto molte guide, concordo con molti utenti che si "perdono" tra le guide per far funzionare beryl o compiz.

Alla fine, avendo una ATI e utilizzando un edgy ho deciso per la soluzione da titolo.

Premetto che beryl l'ho già installato su dapper con xgl senza grossi problemi, ma voglio utilizzare AIGLX su Edgy.

Quindi utilizzo i driver Radeon di xorg.

AIGLX è già in xorg, quindi ho solo modificato xorg.conf per attivarlo ed ho installato beryl, ma quando avvio beryl-manager scompaiono le decorazioni delle finestre e non funzionano ne menù ne pannelli, l'unica è Ctrl+Alt+Backspace.

Eccovi qualche log e file di configurazione:

Codice: Seleziona tutto
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
    GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample


Niente accelerazione, ma se avvio glxgear le rotelline girano senza problemi, inoltre avviando nexuiz nessun problema, tranne la resa delle texture, problema che tra l'altro dovrebbe essere noto.

Quindi il 3d funziona, assumo.

Vi posto il log di Xorg:

Codice: Seleziona tutto

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux raffaello-laptop 2.6.17-10-generic #2 SMP Fri Oct 13 18:45:35 UTC 2006 i686
Build Date: 07 July 2006

[...]
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AIGLX" "true"
(**) Extension "Composite" is enabled

[...]
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 7.1.1, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
   compiled for 7.1.1, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI

[...]
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 7.1.1, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX

[...]
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
   compiled for 7.1.1, module version = 4.2.0
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
   compiled for 7.1.1, module version = 6.6.2
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 1.0

[...]
(II) ATI: ATI driver (version 6.6.2) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
   ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
   ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
   ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
   ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
   ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
   ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
   ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
   ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
   ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
   ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
   ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
   ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
   ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
   ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
   ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
   ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
   ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
   ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
   ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
   ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
   ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
   ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
   ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
   ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
   ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
   ATI Radeon IGP330/340/350 (A4) 4137,
   ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
   ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
   ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
   ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
   ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
   ATI Radeon Mobility 9000 (M9) Lf (AGP),
   ATI Radeon Mobility 9000 (M9) Lg (AGP),
   ATI Radeon 9100 IGP (A5) 5834,
   ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
   ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
   ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
   ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
   ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
   ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
   ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
   ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
   ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
   ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
   ATI FireGL RV360 AV (AGP),
   ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
   ATI Radeon Mobility 9600 (M10) NQ (AGP),
   ATI Radeon Mobility 9600 (M11) NR (AGP),
   ATI Radeon Mobility 9600 (M10) NS (AGP),
   ATI FireGL Mobility T2 (M10) NT (AGP),
   ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
   ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
   ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
   ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
   ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
   ATI Radeon X600 (RV380) 3E50 (PCIE),
   ATI FireGL V3200 (RV380) 3E54 (PCIE),
   ATI Radeon Mobility X600 (M24) 3150 (PCIE),
   ATI Radeon Mobility X300 (M24) 3152 (PCIE),
   ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
   ATI Radeon X600 (RV370) 5B62 (PCIE),
   ATI Radeon X550 (RV370) 5B63 (PCIE),
   ATI FireGL V3100 (RV370) 5B64 (PCIE),
   ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
   ATI Radeon Mobility X300 (M22) 5460 (PCIE),
   ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
   ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
   ATI Radeon XPRESS 200M 5A42 (PCIE),
   ATI Radeon XPRESS 200 5A61 (PCIE),
   ATI Radeon XPRESS 200M 5A62 (PCIE),
   ATI Radeon XPRESS 200 5954 (PCIE),
   ATI Radeon XPRESS 200M 5955 (PCIE),
   ATI Radeon XPRESS 200 5974 (PCIE),
   ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility Radeon X700 XL (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Radeon X700 PRO (RV410) (PCIE),
   ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
   ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
   ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
   ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
   ATI Radeon Mobility 9800 (M18) JN (AGP),
   ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
   ATI Radeon AIW X800 VE (R420) JT (AGP),
   ATI Radeon X800 (R423) UH (PCIE),
   ATI Radeon X800PRO (R423) UI (PCIE),
   ATI Radeon X800LE (R423) UJ (PCIE),
   ATI Radeon X800SE (R423) UK (PCIE),
   ATI FireGL V5100 (R423) UQ (PCIE),
   ATI FireGL unknown (R423) UR (PCIE),
   ATI FireGL unknown (R423) UT (PCIE),
   ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
   ATI Mobility FireGL V5100 (M28) (PCIE),
   ATI Mobility Radeon X800 (M28) (PCIE),
   ATI Mobility Radeon X800 XT (M28) (PCIE),
   ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
   ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
   ATI Radeon X850 5D4C (PCIE),
   ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
   ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
   ATI Radeon X850 XT (R480) (PCIE),
   ATI Radeon X850 XT PE (R480) (PCIE),
   ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
   ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device

[...]
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers/radeon_drv.so

[...]
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 7.1.1, module version = 1.2.0
   ABI class: X.Org Video Driver, version 1.0

[...]
(==) RADEON(0): Using 24 bit depth buffer
(WW) RADEON(0): Enabling DRM support

   *** Direct rendering support is highly experimental for Radeon 9500
   *** and newer cards. The 3d mesa driver is not provided in this tree.
   *** A very experimental (and incomplete) version is available from Mesa CVS.
   *** Additional information can be found on http://r300.sourceforge.net
   *** This message has been last modified on 2005-08-07.

drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf8d6a000
(II) RADEON(0): [drm] mapped SAREA 0xf8d6a000 to 0xb7b35000
(II) RADEON(0): [drm] framebuffer handle = 0xd8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000201 [AGP 0x8086/0x3580; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf900000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xaf8ff000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf6ff000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaf21f000
(II) RADEON(0): [drm] register handle = 0xd0100000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param

[...]
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 169
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xdfffd800 is: 0xdfffd800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 201a7c7c
[b](II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled[/b]
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): Option "XaaNoOffscreenPixmaps"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Scanline Image Writes
   Setting up tile and stipple cache:
      32 128x128 slots
      32 256x256 slots
      16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7385
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
   compiled for 7.1.1, module version = 1.0.0
   ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Option "VendorName" is not used
(WW) RADEON(0): Option "ModelName" is not used
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
error opening security policy file /usr/lib/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Generic Keyboard: XkbLayout: "it"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(--) Setting defaults to alps values
(**) Option "HorizScrollDelta" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
    xkb_keycodes             { include "xfree86+aliases(qwerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+it+level3(ralt_switch)" };
    xkb_geometry             { include "pc(pc105)" };

[...]
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(--) Synaptics Touchpad touchpad found
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
(**) RADEON(0): RADEONSaveScreen(2)
ProcXCloseDevice to close or not ?



A parte qualche WW va tutto benone salvo il fatto che non capisco il rapporto con il DRI :) alla fine pare abilitarlo, carica anche AIGLX. Insomma a parte qualche WW sembra che tutto funzioni benone, infatti, come già detto, le rotelline in glxgear girano benissimo.

Di seguito le sezioni clue del mio xorg.conf

Codice: Seleziona tutto
Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "aticonfig-Screen[0]" 0 0
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice    "stylus" "SendCoreEvents"
        InputDevice    "cursor" "SendCoreEvents"
        InputDevice    "eraser" "SendCoreEvents"
        InputDevice    "Synaptics Touchpad"
        Option          "AIGLX" "true"
EndSection

[...]
Section "Module"
        Load  "i2c"
        Load  "bitmap"
        Load  "ddc"
        Load  "dri"
        Load    "dbe"
        Load  "extmod"
        Load  "freetype"
        Load  "glx"
        Load  "int10"
        Load  "type1"
        Load  "vbe"
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection

[...]
Section "Device"
        Identifier  "aticonfig-Device[0]"
#       Driver      "fglrx"
        Driver          "radeon"
#       Option      "VideoOverlay" "on"
#       Option      "OpenGLOverlay" "off"
#       Option "DRI" "true"
#       Option "ColorTiling" "on"
#       Option "EnablePageFlip" "true"
#       Option "AccelMethod" "EXA"
        Option "XAANoOffscreenPixmaps"
#       Option "RenderAccel" "true"
#       Option "AGPFastWrite" "on"
EndSection

[...]
Section "DRI"
        Mode         0666
EndSection


Concludendo non so quale possa essere il problema, in teoria non avrebbero dovuti essercene, aggiungo che anche con compiz il problema rimane.

Grazie a chiunque per l'eventuale attenzione.

(b2b)
Ultima modifica di ghandalf il martedì 31 ottobre 2006, 23:16, modificato 1 volta in totale.
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda telperion » martedì 31 ottobre 2006, 13:09

Premesso che non ho Ati
prova a vedere la sezione Ati di questo:

BerylOnEdgy note x schede video Ati ed Intel
http://doc.gwos.org/index.php/BerylOnEdgy
Avatar utente
telperion
Imperturbabile Insigne
Imperturbabile Insigne
 
Messaggi: 4841
Iscrizione: luglio 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda lukg » martedì 31 ottobre 2006, 13:28

giusto per provare, prova a togliere agpfastwrite = on dal tuo xorg (e per pulizia anche driver = fglrx)
lukg
Prode Principiante
 
Messaggi: 182
Iscrizione: agosto 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda ghandalf » martedì 31 ottobre 2006, 13:34

Già letta la guida e provate entrambe le soluzioni suggerite, adesso ritento per scrupolo.

:)
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda telperion » martedì 31 ottobre 2006, 13:39

ghandalf ha scritto:Già letta la guida e provate entrambe le soluzioni suggerite, adesso ritento per scrupolo.

:)


giusto per scupolo da terminale quando ti scompaiono i bordi finestre prova a dare

Codice: Seleziona tutto
killall emerald
emerald --replace &


e vedi se succede qualcosa

anche

Codice: Seleziona tutto
killall beryl
beryl &


dovrebbe darti dei messaggi

Ps per far tornare tutto a posto senza resettare:

Codice: Seleziona tutto
killall emerald
killall beryl
metacity --replace &
Ultima modifica di telperion il martedì 31 ottobre 2006, 13:42, modificato 1 volta in totale.
Avatar utente
telperion
Imperturbabile Insigne
Imperturbabile Insigne
 
Messaggi: 4841
Iscrizione: luglio 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda PiAnto » martedì 31 ottobre 2006, 13:41

L'xorg.conf non ha bisogno di essere modificato. Io dovrei avere la tua stessa configurazione hardware. Ripristina l'originale xorg.conf e installa solo i pacchetti di beryl e emerald. Dovrebbe andare.
Avatar utente
PiAnto
Scoppiettante Seguace
Scoppiettante Seguace
 
Messaggi: 690
Iscrizione: agosto 2006
Distribuzione: Archlinux i686
Desktop: Kde SC

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda ghandalf » martedì 31 ottobre 2006, 13:57

@telperion
si freeza tutto non posso neanche utilizzare la console l'unica cosa che da segni di vita è il cursore del mouse. provo da Alt+F2.

@iacalc
ripristinato. glxgear funziona bene.

Un altro dettaglio che ho scordato, aprendo una console e dando:

$ beryl

ottengo

XGL Absent, checking for NVIDIA
Nvidia Absent, running AIGLX

tutto si freeza e devo resettare il server grafico.
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda telperion » martedì 31 ottobre 2006, 14:04

iacalc
lukg

potete postare i vostri xorg.conf se funzionanti con aiglx?

Se arriviamo ad un config che ha un senso per Ati lo aggiungo
al 3d in rilievo per Beryl.
Avatar utente
telperion
Imperturbabile Insigne
Imperturbabile Insigne
 
Messaggi: 4841
Iscrizione: luglio 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda ghandalf » martedì 31 ottobre 2006, 14:09

telperion ha scritto:

Se arriviamo ad un config che ha un senso per Ati lo aggiungo
al 3d in rilievo per Beryl.



(Y),

ho rimosso la sezione Extension, il DRI e Option AIGLX, aggiunto le varie opzioni al device...

X funziona perfettamente, gli ingranaggi di glxgear girano che è un piacere ma avviando beryl-manager o beryl, crasha X e devo resettare il server grafico.

Ridescrivo il crash: impossibile cliccare ovunque, scompaiono le decorazioni delle finestre.

Ho già provato ad impostare un theme con emrald, ma la situazione non cambia.
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda var » martedì 31 ottobre 2006, 14:10

anche io mi trovo nella medesima condizione di ghandalf, ho la stessa scheda video (usi un note Asus M6N, ghandalf?).
cosa mi consigliate di fare per utilizzare AIGLX su una nuova installazione Edgy?

glxinfo ritorna questo:

Codice: Seleziona tutto
name of display: :0.0
libGL warning: 3D driver claims to not support visual 0x4b
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R300 20060815 AGP 1x TCL
OpenGL version string: 1.3 Mesa 6.5.1
OpenGL extensions:
    GL_ARB_fragment_program, GL_ARB_imaging, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_compression, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
    GL_MESAX_texture_float, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_gpu_program_parameters,
    GL_EXT_histogram, GL_EXT_packed_pixels, GL_EXT_polygon_offset,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
    GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
    GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
    GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x24 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x26 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x27 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x29 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2b 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2c 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x2d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2e 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2f 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x30 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x31 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x32 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x4b 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon


mentre il mio xorg.conf è questo:

Codice: Seleziona tutto
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/X11/fonts/misc"
   FontPath   "/usr/share/X11/fonts/cyrillic"
   FontPath   "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/Type1"
   FontPath   "/usr/share/X11/fonts/100dpi"
   FontPath   "/usr/share/X11/fonts/75dpi"
   FontPath   "/usr/share/fonts/X11/misc"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "it"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ExplorerPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Identifier   "Synaptics Touchpad"
   Driver      "synaptics"
   Option      "SendCoreEvents"   "true"
   Option      "Device"      "/dev/psaux"
   Option      "Protocol"      "auto-dev"
   Option      "HorizScrollDelta"   "0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
   Driver      "ati"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
        DisplaySize   338   211
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
   Monitor      "Generic Monitor"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1280x800"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus" "SendCoreEvents"
   InputDevice     "cursor" "SendCoreEvents"
   InputDevice     "eraser" "SendCoreEvents"
   InputDevice   "Synaptics Touchpad"
EndSection

Section "DRI"
   Mode   0666
EndSection


seguendo il thread di Janvitus mi ritrovo nell'impossibilità di avviare X: il sistema mi indica uno "no screen found", o robe del genere... (mad)

grazie a tutti. :)
var
 

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda ghandalf » martedì 31 ottobre 2006, 14:16

var ha scritto:anche io mi trovo nella medesima condizione di ghandalf, ho la stessa scheda video (usi un note Asus M6N, ghandalf?).
cosa mi consigliate di fare per utilizzare AIGLX su una nuova installazione Edgy?


sono con un toshiba satellite M30X-161
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda telperion » martedì 31 ottobre 2006, 14:18

Allora se avete voglia provate questa:
(fate sempre un backup del vostro xorg.conf originale prima)

http://ubuntustorm.wordpress.com/2006/1 ... i-9600-xt/

dal punto

Poi dobbiamo riconfigurare il pacchetto xserver-xorg.
$ sudo dpkg-reconfigure xserver-xorg


Ekkekkavolo possibile che non se ne esce?
Ultima modifica di telperion il martedì 31 ottobre 2006, 14:19, modificato 1 volta in totale.
Avatar utente
telperion
Imperturbabile Insigne
Imperturbabile Insigne
 
Messaggi: 4841
Iscrizione: luglio 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda lukg » martedì 31 ottobre 2006, 14:31

Ok, premetto che ho una 9700pro built by ati....questo è il mio xorg.conf che funziona: le prestazioni del 3d in generale è scandalosa, le cose in openGL vanno lentissime (vedi screensaver GL, oppure google earth...meglio che stanno chiusi)...per contro invece beryl va velocissimo come nemmeno con XGL e i driver proprietari....il cubo gira fluido come non avevo mai visto, ma ho come il dubbio che sia merito di aiglx. Ecco il mio config (posto solo la parte interessata):

Section "Device"
Identifier "ATI Technologies, Inc. Radeon R300 ND [Radeon 9700 Pro]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "AGPFastWrite" "on"
Option "DRI" "true"
Option "ColorTiling" "on"
Option "EnablePageFlip" "true"
Option "AccelMethod" "XAA"
Option "XAANoOffscreenPixmaps"
Option "RenderAccel" "true"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Option "AIGLX" "true"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection



Non ho ne attivato il composite extension visto che dovrebbe essere attivo di default mentre ho messo AIGLX = true anche se in realtà ho qualche dubbio che sia superfluo
lukg
Prode Principiante
 
Messaggi: 182
Iscrizione: agosto 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda ghandalf » martedì 31 ottobre 2006, 14:35

telperion ha scritto:Allora se avete voglia provate questa:
(fate sempre un backup del vostro xorg.conf originale prima)

http://ubuntustorm.wordpress.com/2006/1 ... i-9600-xt/

dal punto

Poi dobbiamo riconfigurare il pacchetto xserver-xorg.
$ sudo dpkg-reconfigure xserver-xorg


Ekkekkavolo possibile che non se ne esce?


Seguend la guida e dando:

$ beryl

ottengo:

XGL Absent, checking for NVIDIA
Nvidia Absent, assuming AIGLX
libGL warning: 3D driver claims to not support visual 0x4b
Initiating splash
beryl: water: GL_ARB_fragment_program is missing

ed ovviamente non funziona nulla.. ;D

Provo con l''ultimo xorg.conf postato.

C''è da dire che l''accelerazione 3d è splendida, neverball va che è una bellezza ed anche nexuiz se non fosse per le texture.
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda ghandalf » martedì 31 ottobre 2006, 14:49

Detto fatto seguendo le indicazioni del post 13 ho distrutto la edgy... ;D, non parte più nulla!

Non arriva neanche alla CLI.
Desumo che la #13 non vada seguita.. per le mobility!
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda lukg » martedì 31 ottobre 2006, 15:03

Bhè effettivamente non dovevi fare copia e incolla (rotfl) (rotfl) (rotfl) (rotfl)
lukg
Prode Principiante
 
Messaggi: 182
Iscrizione: agosto 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda telperion » martedì 31 ottobre 2006, 15:25

Altra guida per Edgy - Ati - driver xorg-driver-fglrx - Beryl - XGL
nel caso non riusciate con Aiglx in nessuno modo....


http://lhansen.blogspot.com/2006/10/3d- ... -edgy.html
Avatar utente
telperion
Imperturbabile Insigne
Imperturbabile Insigne
 
Messaggi: 4841
Iscrizione: luglio 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda ghandalf » martedì 31 ottobre 2006, 15:56

Sunto e conclusione!

Reinstallato la edgy, su un'installazione vergine, unica cosa configurata il wifi con wpa, poi mi è bastato seguire la guida sul wiki del beryl-project.

Nessuna modifica ad xorg.conf, da terminale avvio beryl-manager e funziona.

Posto il mio xorg.conf che poi è quello installato di default

Codice: Seleziona tutto
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/X11/fonts/misc"
   FontPath   "/usr/share/X11/fonts/cyrillic"
   FontPath   "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/Type1"
   FontPath   "/usr/share/X11/fonts/100dpi"
   FontPath   "/usr/share/X11/fonts/75dpi"
   FontPath   "/usr/share/fonts/X11/misc"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "it"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ExplorerPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Identifier   "Synaptics Touchpad"
   Driver      "synaptics"
   Option      "SendCoreEvents"   "true"
   Option      "Device"      "/dev/psaux"
   Option      "Protocol"      "auto-dev"
   Option      "HorizScrollDelta"   "0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
   Driver      "ati"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
   Monitor      "Generic Monitor"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1280x800"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus" "SendCoreEvents"
   InputDevice     "cursor" "SendCoreEvents"
   InputDevice     "eraser" "SendCoreEvents"
   InputDevice   "Synaptics Touchpad"
EndSection

Section "DRI"
   Mode   0666
EndSection
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda ghandalf » martedì 31 ottobre 2006, 15:57

lukg ha scritto:Bhè effettivamente non dovevi fare copia e incolla (rotfl) (rotfl) (rotfl) (rotfl)


Sì, decisamente! (rotfl)
ghandalf
Prode Principiante
 
Messaggi: 13
Iscrizione: ottobre 2006

Re: [ATI MOBILITY 9600 - M10] Edgy+Radeon+AIGLX+Beryl, ci sono speranze?

Messaggioda telperion » martedì 31 ottobre 2006, 16:12

ghandalf ha scritto:Sunto e conclusione!

Reinstallato la edgy, su un''installazione vergine, unica cosa configurata il wifi con wpa, poi mi è bastato seguire la guida sul wiki del beryl-project.

Nessuna modifica ad xorg.conf, da terminale avvio beryl-manager e funziona.

Posto il mio xorg.conf che poi è quello installato di default



Bene è come con Nvidia allora
più cose metti nell''xorg.conf più incasini tutto,
alla faccia di tutte le guide........

Aggiornata la risposta 6 con le cose essenziali.

Aggiungi [RISOLTO] al titolo del primo post
Avatar utente
telperion
Imperturbabile Insigne
Imperturbabile Insigne
 
Messaggi: 4841
Iscrizione: luglio 2006

Successiva

Torna a Personalizzazione dell'ambiente desktop

Chi c’è in linea

Visualizzano questa pagina: acaba e 8 ospiti