Pagina 1 di 1

Scansione

Inviato: giovedì 2 luglio 2020, 11:50
da Massis
03.pdf
(134.68 KiB) Scaricato 98 volte
HP Laser MFP 137fnw, riesco a fare la scansione solo entro pochi secondi dalla accensione. Perchè? Come posso risolvere? Quali informazioni possono servire? Ho installato i pacchetti di HP. Lo scanner anche se solo per una scansione alla accensione funziona. Dopo segnala Acquisizione non riuscita. Impossibile connettersi allo scanner.

Re: Scansione

Inviato: giovedì 2 luglio 2020, 12:07
da Roberto Pontecorvi
Con la stampante acesa, da terminale dai il comando:

Codice: Seleziona tutto

hp-doctor

e posta il risultato.

Re: Scansione

Inviato: giovedì 2 luglio 2020, 12:14
da Massis
adriana@adriana-HP-650-Notebook-PC:~$ hp-doctor

HP Linux Imaging and Printing System (ver. 3.20.3)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.3)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.



Checking for Deprecated items....
No Deprecated items are found


Checking for HPLIP updates....
error: Failed to locate hp-upgrade utility


Checking for Dependencies....
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

Kernel: 5.4.0-40-generic #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 GNU/Linux
Host: adriana-HP-650-Notebook-PC
Proc: 5.4.0-40-generic #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.20.3

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.3



Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[fax]
email_address =
voice_phone =

[installation]
date_time = 07/02/20 12:13:18
version = 3.20.3

[last_used]
device_uri =
printer_name =
working_dir = .

[polling]
device_list =
enable = false
interval = 5

[refresh]
enable = true
rate = 30
type = 1

[settings]
systray_messages = 0
systray_visible = 0

[upgrade]
last_upgraded_time = 1593591224
notify_upgrade = true
pending_upgrade_time = 0


<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

-------------------------
| External Dependencies |
-------------------------

error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -

------------------------
| General Dependencies |
------------------------

error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.2 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -

--------------
| COMPILEDEP |
--------------

error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -

---------------------
| Python Extentions |
---------------------

cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -

----------------------
| Scan Configuration |
----------------------

'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `escl:http://127.0.0.1:60000' is a ESCL HP Laser MFP 131 133 135-138 flatbed scanner
device `escl:http://127.0.0.1:60000' is a ESCL HP Laser MFP 131 133 135-138 flatbed scanner


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


HP_Laser_MFP_131_133_135_138
----------------------------
Type: Unknown
Device URI: implicitclass://HP_Laser_MFP_131_133_135_138/
PPD: /etc/cups/ppd/HP_Laser_MFP_131_133_135_138.ppd
warning: Failed to read /etc/cups/ppd/HP_Laser_MFP_131_133_135_138.ppd ppd file
PPD Description:
Printer status: la stampante HP_Laser_MFP_131_133_135_138 è inattiva. è stata abilitata da gio 2 lug 2020, 11:48:10
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.


--------------
| PERMISSION |
--------------

error: Unsupported model: HP_Laser_MFP_137fnw
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing or 'cups' service is not running.
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing or 'cups' service is not running.
error: 'cups-bsd' package is missing or 'cups' service is not running.
error: 'cups-client' package is missing or 'cups' service is not running.
error: 'libcupsimage2-dev' package is missing or 'cups' service is not running.
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible


ENTER SUDO PASSWORD
-------------------
Please enter the sudoer (adriana)'s password:


Checking Permissions....


Checking for Configured Queues....
warning: Fail to read ppd=/etc/cups/ppd/HP_Laser_MFP_131_133_135_138.ppd file
warning: Insufficient permission to access file /etc/cups/ppd/HP_Laser_MFP_131_133_135_138.ppd
warning: Could not complete Queue(s) configuration check


Checking for HP Properitery Plugin's....
No plug-in printers are configured.

Diagnose completed...



More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
adriana@adriana-HP-650-Notebook-PC:~$

Re: Scansione

Inviato: giovedì 2 luglio 2020, 12:25
da Roberto Pontecorvi
La stampante è collegata con cavo usb? se no fallo.

Re: Scansione

Inviato: giovedì 2 luglio 2020, 12:41
da Massis
collegata con usb. confermo

Re: Scansione

Inviato: giovedì 2 luglio 2020, 15:27
da Roberto Pontecorvi
Intanto modifica il post precedente mettendo il risultato all'interno dei codice. Tasto virgolette rovesciate </>.
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install.
dovresti provare con la 3.20.5

Re: Scansione

Inviato: giovedì 2 luglio 2020, 20:20
da Massis
adriana@adriana-HP-650-Notebook-PC:~$ hp-doctor
/usr/share/hplip/check.py:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:

HP Linux Imaging and Printing System (ver. 3.20.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.



Checking for Deprecated items....
No Deprecated items are found


Checking for HPLIP updates....

HP Linux Imaging and Printing System (ver. 3.20.6)
HPLIP upgrade latest version ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Latest version of HPLIP is already installed.


Checking for Dependencies....

---------------
| SYSTEM INFO |
---------------

Kernel: 5.4.0-40-generic #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 GNU/Linux
Host: adriana-HP-650-Notebook-PC
Proc: 5.4.0-40-generic #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 GNU/Linux
Distribution: 12 20.04
Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.6
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 20.04 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.20.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.20.6
html=/usr/share/doc/hplip-3.20.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.6
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.6



Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1593712545
pending_upgrade_time = 0
latest_available_version = 3.17.10

[installation]
date_time = 07/02/20 20:14:57
version = 3.20.6


<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

-------------------------
| External Dependencies |
-------------------------

cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.1 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
dbus DBus - Message bus system REQUIRED - 1.12.16 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -

------------------------
| General Dependencies |
------------------------

libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.3.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.14.1 OK -
python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.14.1 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.8.2 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -

--------------
| COMPILEDEP |
--------------

libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -

---------------------
| Python Extentions |
---------------------

cupsext CUPS-Extension REQUIRED - 3.20.6 OK -
hpmudext IO-Extension REQUIRED - 3.20.6 OK -

----------------------
| Scan Configuration |
----------------------

hpaio HPLIP-SANE-Backend REQUIRED - 3.20.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.6 OK -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `escl:http://127.0.0.1:60000' is a ESCL HP Laser MFP 131 133 135-138 flatbed scanner
device `escl:http://127.0.0.1:60000' is a ESCL HP Laser MFP 131 133 135-138 flatbed scanner


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


HP_Laser_MFP_131_133_135_138
----------------------------
Type: Unknown
Device URI: implicitclass://HP_Laser_MFP_131_133_135_138/
PPD: /etc/cups/ppd/HP_Laser_MFP_131_133_135_138.ppd
warning: Failed to read /etc/cups/ppd/HP_Laser_MFP_131_133_135_138.ppd ppd file
PPD Description:
Printer status: la stampante HP_Laser_MFP_131_133_135_138 è inattiva. è stata abilitata da gio 2 lug 2020, 20:09:11
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.


--------------
| PERMISSION |
--------------

error: Unsupported model: HP_Laser_MFP_137fnw


Checking Permissions....


Checking for Configured Queues....
warning: Fail to read ppd=/etc/cups/ppd/HP_Laser_MFP_131_133_135_138.ppd file
warning: Insufficient permission to access file /etc/cups/ppd/HP_Laser_MFP_131_133_135_138.ppd
warning: Could not complete Queue(s) configuration check


Checking for HP Properitery Plugin's....
No plug-in printers are configured.

Diagnose completed...



More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
adriana@adriana-HP-650-Notebook-PC:~$

Re: Scansione

Inviato: giovedì 2 luglio 2020, 20:22
da Massis
Ho installato la 3.20.6 funziona come prima. Altri suggerimenti? Grazie

Re: Scansione

Inviato: giovedì 2 luglio 2020, 21:31
da Roberto Pontecorvi
Intanto modifica il post precedente mettendo il risultato all'interno dei quote code. Tasto virgolette rovesciate </>.
fai questo prima che se ne accorgano gli amministratori. Sto vedendo le nuove caratteristiche del drive 3.20.6 e poi ti riferisco. Intanto prova ad eliminare la stampante da "gestione stampanti" e poi riconfigurarla. Quello strano e questo:
| DISCOVERED USB DEVICES |
--------------------------
No devices found
non vede la stampante sulla porta usb. Prova a cambiare porta usb, magari con una che non sia usb3.

Re: Scansione

Inviato: venerdì 3 luglio 2020, 7:04
da giulux
@Massis Come vedi, inseriti come hai fatto i listati rendono i post troppo lunghi e di difficile lettura.
In futuro incollali tra i tag [ code] e [ /code] che si creano cliccando su </> in alto, sopra la finestra di scrittura (editor completo) così:
  • [ code]listato
    da postare
    [ /code]
Correggi i post precedenti cliccando su "modifica", poi seleziona il listato, clicca su </> e salva.
Ciao

Re: Scansione

Inviato: venerdì 3 luglio 2020, 11:51
da Roberto Pontecorvi
@ giulux - hai raggione, mi scuso del mio errore.