Forum Ubuntu-it

Codice: Seleziona tutto

sensors

Codice: Seleziona tutto

sudo sensors-detect

Codice: Seleziona tutto

luigi@luigi-desktop:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:     +1.08 V  (min =  +0.85 V, max =  +1.60 V)
 +3.3 Voltage:     +3.30 V  (min =  +2.97 V, max =  +3.63 V)
 +5 Voltage:       +5.20 V  (min =  +4.50 V, max =  +5.50 V)
 +12 Voltage:     +12.51 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:    2070 RPM  (min =  600 RPM)
CHASSIS FAN Speed:1214 RPM  (min = 1200 RPM)
POWER FAN Speed:     0 RPM  (min = 1800 RPM)
CPU Temperature:   +32.0°C  (high = +60.0°C, crit = +95.0°C)  
MB Temperature:    +32.0°C  (high = +45.0°C, crit = +95.0°C)  

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +35.0°C  (high = +76.0°C, crit = +100.0°C)  

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +30.0°C  (high = +76.0°C, crit = +100.0°C)  

coretemp-isa-0002
Adapter: ISA adapter
Core 2:      +38.0°C  (high = +76.0°C, crit = +100.0°C)  

coretemp-isa-0003
Adapter: ISA adapter
Core 3:      +35.0°C  (high = +76.0°C, crit = +100.0°C)  

luigi@luigi-desktop:~$ sudo sensors-detect
[sudo] password for luigi: 
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: System manufacturer System Product Name
# Board: ASUSTeK Computer INC. P5KPL/EPU

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
Intel Core family thermal sensor...                         Success!
    (driver `coretemp')
Intel Atom thermal sensor...                                No
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found `Winbond W83627DHG-P Super IO Sensors'                Success!
    (address 0x290, driver `w83627ehf')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): y
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7

Next adapter: SMBus I801 adapter at 0400 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'...                                No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)

Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `w83627ehf':
  * ISA bus, address 0x290
    Chip `Winbond W83627DHG-P Super IO Sensors' (confidence: 9)

Driver `coretemp':
  * Chip `Intel Core family thermal sensor' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
w83627ehf
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)n

luigi@luigi-desktop:~$ 

Codice: Seleziona tutto

aticonfig --adapter=0 --od-gettemperature

Codice: Seleziona tutto

luigi@luigi-desktop:~$ aticonfig --adapter=0 --od-gettemperature
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.
luigi@luigi-desktop:~$ sudo aticonfig --initial
Found fglrx primary device section
 Unable to find any supported Screen sections
luigi@luigi-desktop:~$ aticonfig --adapter=0 --od-gettemperature
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configurationfile manually and run aticonfig again.
aticonfig: parsing the command-line failed.

Codice: Seleziona tutto

luigi@luigi-desktop:~$ sudo aticonfig --initial -f[sudo] password for luigi: 
Uninitialised file found, configuring.
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.fglrx-1
luigi@luigi-desktop:~$ aticonfig --adapter=0 --od-gettemperature

Adapter 0 - ATI Radeon HD 4600 Series 
            Sensor 0: Temperature - 36.50 C

Codice: Seleziona tutto

paulaner@ciompizzz:~$ aticonfig --adapter=0 --od-gettemperature
ERROR - Get temperature failed for Adapter 0 - ATI Radeon HD 3200 Graphics

Codice: Seleziona tutto

sudo aticonfig --initial -f