Problema audio

Prossima versione di Ubuntu in fase di sviluppo e test. Per i precedenti rilasci, consultare «Archivio del forum».
Avatar utente
woddy68
Rampante Reduce
Rampante Reduce
Messaggi: 8632
Iscrizione: sabato 12 febbraio 2011, 14:23
Desktop: Kde Plasma5
Distribuzione: openSUSE Tumbleweed - KDE Neon
Sesso: Maschile

Problema audio

Messaggio da woddy68 »

:ciao: Ho un problema con l'audio in questa versione di ubuntu sul netbook, in pratica l'audio non funziona, ma se apro alsamixer e alzo un volume poi funziona regolarmente, il problema è che non mantiene l'impostazione e ad ogni riavvio sono costretto a rifare la procedura, spero risolvano per la stabile....al momento avete qualche idea su come mantenere l'impostazione ?
Desktop - DELL Optiplex 7010 - Notebook HP 250
-Ho sempre accettato caramelle dagli sconosciuti-
🇺🇦 🇺🇦 🇺🇦
ivantu
Rampante Reduce
Rampante Reduce
Messaggi: 6655
Iscrizione: sabato 8 giugno 2013, 9:25
Desktop: Ubuntu Lubuntu Budgie
Distribuzione: 20.04 LTS; 22.04 LTS
Sesso: Maschile

Re: Problema audio

Messaggio da ivantu »

hai provato il comando

Codice: Seleziona tutto

alsactl store
e riavviare ubuntu?

ovviamente dopo aver modificato manualmente a tuo piacere i canali da alsamixer.
Buona giornata utenti del forum. :ciao: ivantu
Avatar utente
woddy68
Rampante Reduce
Rampante Reduce
Messaggi: 8632
Iscrizione: sabato 12 febbraio 2011, 14:23
Desktop: Kde Plasma5
Distribuzione: openSUSE Tumbleweed - KDE Neon
Sesso: Maschile

Re: Problema audio

Messaggio da woddy68 »

...ho provato ora, ma purtroppo non funziona, ho scaricato la GUI di alsamixer per rendere la cosa un po più comoda....c'è sempre un volume a 0 ed è proprio quello che dovrebbe essere su. Grazie lo stesso, se hai altre idee...
Desktop - DELL Optiplex 7010 - Notebook HP 250
-Ho sempre accettato caramelle dagli sconosciuti-
🇺🇦 🇺🇦 🇺🇦
ivantu
Rampante Reduce
Rampante Reduce
Messaggi: 6655
Iscrizione: sabato 8 giugno 2013, 9:25
Desktop: Ubuntu Lubuntu Budgie
Distribuzione: 20.04 LTS; 22.04 LTS
Sesso: Maschile

Re: Problema audio

Messaggio da ivantu »

il comando va dato ovviamente con i privilegi di amministratore.... root.

Posta qui l'output del seguente file

Codice: Seleziona tutto

cat -n /etc/pulse/default.pa
Buona giornata utenti del forum. :ciao: ivantu
Avatar utente
woddy68
Rampante Reduce
Rampante Reduce
Messaggi: 8632
Iscrizione: sabato 12 febbraio 2011, 14:23
Desktop: Kde Plasma5
Distribuzione: openSUSE Tumbleweed - KDE Neon
Sesso: Maschile

Re: Problema audio

Messaggio da woddy68 »

Purtroppo avevo perso il post...si comunque il comando l'ho dato con i privilegi di root.
Ecco il risultato del comando che mi hai postato

Codice: Seleziona tutto

@carlo-1011PX:~$ cat -n /etc/pulse/default.pa
     1	#!/usr/bin/pulseaudio -nF
     2	#
     3	# This file is part of PulseAudio.
     4	#
     5	# PulseAudio is free software; you can redistribute it and/or modify it
     6	# under the terms of the GNU Lesser General Public License as published by
     7	# the Free Software Foundation; either version 2 of the License, or
     8	# (at your option) any later version.
     9	#
    10	# PulseAudio is distributed in the hope that it will be useful, but
    11	# WITHOUT ANY WARRANTY; without even the implied warranty of
    12	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
    13	# General Public License for more details.
    14	#
    15	# You should have received a copy of the GNU Lesser General Public License
    16	# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
    17	
    18	# This startup script is used only if PulseAudio is started per-user
    19	# (i.e. not in system mode)
    20	
    21	.nofail
    22	
    23	### Load something into the sample cache
    24	#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
    25	#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga
    26	#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga
    27	#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
    28	
    29	.fail
    30	
    31	### Automatically restore the volume of streams and devices
    32	load-module module-device-restore
    33	load-module module-stream-restore
    34	load-module module-card-restore
    35	
    36	### Automatically augment property information from .desktop files
    37	### stored in /usr/share/application
    38	load-module module-augment-properties
    39	
    40	### Should be after module-*-restore but before module-*-detect
    41	load-module module-switch-on-port-available
    42	
    43	### Load audio drivers statically
    44	### (it's probably better to not load these drivers manually, but instead
    45	### use module-udev-detect -- see below -- for doing this automatically)
    46	#load-module module-alsa-sink
    47	#load-module module-alsa-source device=hw:1,0
    48	#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
    49	#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
    50	#load-module module-null-sink
    51	#load-module module-pipe-sink
    52	
    53	### Automatically load driver modules depending on the hardware available
    54	.ifexists module-udev-detect.so
    55	load-module module-udev-detect
    56	.else
    57	### Use the static hardware detection module (for systems that lack udev support)
    58	load-module module-detect
    59	.endif
    60	
    61	### Automatically connect sink and source if JACK server is present
    62	.ifexists module-jackdbus-detect.so
    63	.nofail
    64	load-module module-jackdbus-detect channels=2
    65	.fail
    66	.endif
    67	
    68	### Automatically load driver modules for Bluetooth hardware
    69	.ifexists module-bluetooth-policy.so
    70	load-module module-bluetooth-policy
    71	.endif
    72	
    73	.ifexists module-bluetooth-discover.so
    74	load-module module-bluetooth-discover
    75	.endif
    76	
    77	### Load several protocols
    78	.ifexists module-esound-protocol-unix.so
    79	load-module module-esound-protocol-unix
    80	.endif
    81	load-module module-native-protocol-unix
    82	
    83	### Network access (may be configured with paprefs, so leave this commented
    84	### here if you plan to use paprefs)
    85	#load-module module-esound-protocol-tcp
    86	#load-module module-native-protocol-tcp
    87	#load-module module-zeroconf-publish
    88	
    89	### Load the RTP receiver module (also configured via paprefs, see above)
    90	#load-module module-rtp-recv
    91	
    92	### Load the RTP sender module (also configured via paprefs, see above)
    93	#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
    94	#load-module module-rtp-send source=rtp.monitor
    95	
    96	### Load additional modules from GConf settings. This can be configured with the paprefs tool.
    97	### Please keep in mind that the modules configured by paprefs might conflict with manually
    98	### loaded modules.
    99	.ifexists module-gconf.so
   100	.nofail
   101	load-module module-gconf
   102	.fail
   103	.endif
   104	
   105	### Automatically restore the default sink/source when changed by the user
   106	### during runtime
   107	### NOTE: This should be loaded as early as possible so that subsequent modules
   108	### that look up the default sink/source get the right value
   109	load-module module-default-device-restore
   110	
   111	### Automatically move streams to the default sink if the sink they are
   112	### connected to dies, similar for sources
   113	load-module module-rescue-streams
   114	
   115	### Make sure we always have a sink around, even if it is a null sink.
   116	load-module module-always-sink
   117	
   118	### Honour intended role device property
   119	load-module module-intended-roles
   120	
   121	### Automatically suspend sinks/sources that become idle for too long
   122	load-module module-suspend-on-idle
   123	
   124	### If autoexit on idle is enabled we want to make sure we only quit
   125	### when no local session needs us anymore.
   126	.ifexists module-console-kit.so
   127	load-module module-console-kit
   128	.endif
   129	.ifexists module-systemd-login.so
   130	load-module module-systemd-login
   131	.endif
   132	
   133	### Enable positioned event sounds
   134	load-module module-position-event-sounds
   135	
   136	### Cork music/video streams when a phone stream is active
   137	#load-module module-role-cork
   138	
   139	### Modules to allow autoloading of filters (such as echo cancellation)
   140	### on demand. module-filter-heuristics tries to determine what filters
   141	### make sense, and module-filter-apply does the heavy-lifting of
   142	### loading modules and rerouting streams.
   143	load-module module-filter-heuristics
   144	load-module module-filter-apply
   145	
   146	# X11 modules should not be started from default.pa so that one daemon
   147	# can be shared by multiple sessions.
   148	
   149	### Load X11 bell module
   150	#load-module module-x11-bell sample=x11-bell
   151	
   152	### Register ourselves in the X11 session manager
   153	#load-module module-x11-xsmp
   154	
   155	### Publish connection data in the X11 root window
   156	#.ifexists module-x11-publish.so
   157	#.nofail
   158	#load-module module-x11-publish
   159	#.fail
   160	#.endif
   161	
   162	### Make some devices default
   163	#set-default-sink output
   164	#set-default-source input
@carlo-1011PX:~$ 
Desktop - DELL Optiplex 7010 - Notebook HP 250
-Ho sempre accettato caramelle dagli sconosciuti-
🇺🇦 🇺🇦 🇺🇦
ivantu
Rampante Reduce
Rampante Reduce
Messaggi: 6655
Iscrizione: sabato 8 giugno 2013, 9:25
Desktop: Ubuntu Lubuntu Budgie
Distribuzione: 20.04 LTS; 22.04 LTS
Sesso: Maschile

Re: Problema audio

Messaggio da ivantu »

ora.... io farei una cosa di questo tipo. Dovresti usare una live cd/usb di ubuntu, o versioni precedenti installate sul tuo pc, dove ovviamente tutto funziona. vedo che il problema è su una versione ancora in fase di progetto, quindi facile che manchi qualcosa.
Aperto quindi la "live", controllare riga per riga questo dato file. Le decommentate come già dovresti saperlo il sistema non le carica, non serve controllarle.

Io ho fatto una controllata veloce con la mia versione del file sulla 12.04 sembra che c'è qualche mancanza di comandi.
Buona giornata utenti del forum. :ciao: ivantu
Avatar utente
woddy68
Rampante Reduce
Rampante Reduce
Messaggi: 8632
Iscrizione: sabato 12 febbraio 2011, 14:23
Desktop: Kde Plasma5
Distribuzione: openSUSE Tumbleweed - KDE Neon
Sesso: Maschile

Re: Problema audio

Messaggio da woddy68 »

....grazie mille, provo a fare come dici tu.
Desktop - DELL Optiplex 7010 - Notebook HP 250
-Ho sempre accettato caramelle dagli sconosciuti-
🇺🇦 🇺🇦 🇺🇦
ivantu
Rampante Reduce
Rampante Reduce
Messaggi: 6655
Iscrizione: sabato 8 giugno 2013, 9:25
Desktop: Ubuntu Lubuntu Budgie
Distribuzione: 20.04 LTS; 22.04 LTS
Sesso: Maschile

Re: Problema audio

Messaggio da ivantu »

di nulla. fammi sapere se trovi differenze.
Buona giornata utenti del forum. :ciao: ivantu
Scrivi risposta

Ritorna a “Vivid Vervet 15.04”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 6 ospiti