[Risolto]Si è verificato un problema ad un programma di sistema

Configurazione e uso delle applicazioni del desktop manager alla base di Ubuntu MATE.
Avatar utente
Valgio63
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 328
Iscrizione: lunedì 10 ottobre 2011, 16:41
Desktop: mate
Distribuzione: Ubuntu 20.04.3 LTS
Sesso: Maschile
Località: Firenze

[Risolto]Si è verificato un problema ad un programma di sistema

Messaggio da Valgio63 »

Salve a tutti di nuovo.
Non sapendo come riaprire un post [Risolto], ne apro uno nuovo ma per lo stesso problema, anzi...quasi!
Dopo aver installato Ubuntu Mate 20.04.03 mi appare, all'avvio ma avolte anche dopo, Una finestra così:
Immagine
Cliccando su Segnala Problema... la finestra si chiude senza lanciare niente. Solo la prima volta che lo ha fatto ha aperto una nuova finestra che tentava, inutilmente, di raccogliere le informazioni da segnalare!
Come la volta scorsa ho dato il comando

Codice: Seleziona tutto

journalctl -b -p err
che stavolta però ha dato questo risultato:

Codice: Seleziona tutto

-- Logs begin at Sat 2022-01-15 12:34:11 CET, end at Thu 2022-01-27 21:33:49 CET. --
gen 27 20:14:35 valter-MS-7721 kernel: em28xx 2-3:1.0: Your board has no unique USB ID.
                                       A hint were successfully done, based on i2c devicelist hash.
                                       This method is not 100% failproof.
                                       If the board were misdetected, please email this log to:
                                               V4L Mailing List  <linux-media@vger.kernel.org>
                                       Board detected as EM2860/SAA711X Reference Design
gen 27 20:14:35 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 20:14:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 20:14:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 20:15:17 valter-MS-7721 lightdm[1383]: gkr-pam: unable to locate daemon control file
gen 27 20:15:17 valter-MS-7721 pulseaudio[1226]: Error opening PCM device front:2: File o directory non >
gen 27 20:15:17 valter-MS-7721 pulseaudio[1226]: Error opening PCM device hw:1: File o directory non esi>
gen 27 20:15:21 valter-MS-7721 pulseaudio[1471]: GetManagedObjects() failed: org.freedesktop.DBus.Error.>
gen 27 20:51:59 valter-MS-7721 kernel: ehci-pci 0000:00:12.2: port 2 reset error -110
gen 27 20:52:00 valter-MS-7721 kernel: ehci-pci 0000:00:12.2: port 2 reset error -110
gen 27 20:52:01 valter-MS-7721 kernel: ehci-pci 0000:00:12.2: port 2 reset error -110
gen 27 20:52:01 valter-MS-7721 kernel: ehci-pci 0000:00:12.2: port 2 reset error -110
gen 27 20:52:02 valter-MS-7721 kernel: ehci-pci 0000:00:12.2: port 2 reset error -110
gen 27 20:52:03 valter-MS-7721 kernel: usb usb1-port2: Cannot enable. Maybe the USB cable is bad?
gen 27 20:52:03 valter-MS-7721 kernel: ehci-pci 0000:00:12.2: port 2 reset error -110
gen 27 20:52:04 valter-MS-7721 kernel: ehci-pci 0000:00:12.2: port 2 reset error -110
gen 27 20:52:05 valter-MS-7721 kernel: ehci-pci 0000:00:12.2: port 2 reset error -110
lines 1-23
Capisco che ci sono problemi con le usb, ma qualcuno mi sa dire cosa dovrei fare?
Attendo, come sempre, lumi e ringrazio in anticipo.
Ultima modifica di Valgio63 il venerdì 28 gennaio 2022, 19:10, modificato 2 volte in totale.
E' meglio star zitti e dare l'impressione di essere scemo, che aprir bocca a sproposito e togliere ogni ragionevole dubbio!
Avatar utente
dxgiusti
Rampante Reduce
Rampante Reduce
Messaggi: 5372
Iscrizione: lunedì 19 novembre 2007, 14:10
Desktop: Mate
Distribuzione: PCLinuxOS-Mate
Sesso: Maschile
Località: Lodi

Re: Si è verificato un problema ad un programma di sistema

Messaggio da dxgiusti »

Codice: Seleziona tutto

sudo apt update && sudo apt full-upgrade
è per aggiornare. poi al termine riprova se ti segnala ancora l'errore.
Avatar utente
Valgio63
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 328
Iscrizione: lunedì 10 ottobre 2011, 16:41
Desktop: mate
Distribuzione: Ubuntu 20.04.3 LTS
Sesso: Maschile
Località: Firenze

Re: Si è verificato un problema ad un programma di sistema

Messaggio da Valgio63 »

Ok , eseguo.

Ah, dopo un riavvio ho ridato il comando, viene fuori questo:

Codice: Seleziona tutto


-- Logs begin at Sat 2022-01-15 12:34:11 CET, end at Thu 2022-01-27 22:05:01 CET. --
gen 27 22:03:39 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:39 valter-MS-7721 kernel: em28xx 2-3:1.0: Your board has no unique USB ID.
                                       A hint were successfully done, based on i2c devicelist hash.
                                       This method is not 100% failproof.
                                       If the board were misdetected, please email this log to:
                                               V4L Mailing List  <linux-media@vger.kernel.org>
                                       Board detected as EM2860/SAA711X Reference Design
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:04:21 valter-MS-7721 pulseaudio[1217]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, th>
gen 27 22:04:50 valter-MS-7721 lightdm[1434]: gkr-pam: unable to locate daemon control file
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device front:2: File o directory non esistente
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device hw:1: File o directory non esistente
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
 ESCOD





















































-- Logs begin at Sat 2022-01-15 12:34:11 CET, end at Thu 2022-01-27 22:05:01 CET. --
gen 27 22:03:39 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:39 valter-MS-7721 kernel: em28xx 2-3:1.0: Your board has no unique USB ID.
                                       A hint were successfully done, based on i2c devicelist hash.
                                       This method is not 100% failproof.
                                       If the board were misdetected, please email this log to:
                                               V4L Mailing List  <linux-media@vger.kernel.org>
                                       Board detected as EM2860/SAA711X Reference Design
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:04:21 valter-MS-7721 pulseaudio[1217]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, th>
gen 27 22:04:50 valter-MS-7721 lightdm[1434]: gkr-pam: unable to locate daemon control file
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device front:2: File o directory non esistente
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device hw:1: File o directory non esistente
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
 ESCOD





















































-- Logs begin at Sat 2022-01-15 12:34:11 CET, end at Thu 2022-01-27 22:05:01 CET. --
gen 27 22:03:39 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:39 valter-MS-7721 kernel: em28xx 2-3:1.0: Your board has no unique USB ID.
                                       A hint were successfully done, based on i2c devicelist hash.
                                       This method is not 100% failproof.
                                       If the board were misdetected, please email this log to:
                                               V4L Mailing List  <linux-media@vger.kernel.org>
                                       Board detected as EM2860/SAA711X Reference Design
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:04:21 valter-MS-7721 pulseaudio[1217]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, th>
gen 27 22:04:50 valter-MS-7721 lightdm[1434]: gkr-pam: unable to locate daemon control file
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device front:2: File o directory non esistente
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device hw:1: File o directory non esistente
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
 ESCOD





















































-- Logs begin at Sat 2022-01-15 12:34:11 CET, end at Thu 2022-01-27 22:05:01 CET. --
gen 27 22:03:39 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:39 valter-MS-7721 kernel: em28xx 2-3:1.0: Your board has no unique USB ID.
                                       A hint were successfully done, based on i2c devicelist hash.
                                       This method is not 100% failproof.
                                       If the board were misdetected, please email this log to:
                                               V4L Mailing List  <linux-media@vger.kernel.org>
                                       Board detected as EM2860/SAA711X Reference Design
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:04:21 valter-MS-7721 pulseaudio[1217]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, th>
gen 27 22:04:50 valter-MS-7721 lightdm[1434]: gkr-pam: unable to locate daemon control file
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device front:2: File o directory non esistente
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device hw:1: File o directory non esistente
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
 ESCOD





















































-- Logs begin at Sat 2022-01-15 12:34:11 CET, end at Thu 2022-01-27 22:05:01 CET. --
gen 27 22:03:39 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:39 valter-MS-7721 kernel: em28xx 2-3:1.0: Your board has no unique USB ID.
                                       A hint were successfully done, based on i2c devicelist hash.
                                       This method is not 100% failproof.
                                       If the board were misdetected, please email this log to:
                                               V4L Mailing List  <linux-media@vger.kernel.org>
                                       Board detected as EM2860/SAA711X Reference Design
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:52 valter-MS-7721 colord-sane[1114]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:03:55 valter-MS-7721 kernel: usb 2-1: 3:1: cannot get freq at ep 0x84
gen 27 22:04:21 valter-MS-7721 pulseaudio[1217]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, th>
gen 27 22:04:50 valter-MS-7721 lightdm[1434]: gkr-pam: unable to locate daemon control file
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device front:2: File o directory non esistente
gen 27 22:04:50 valter-MS-7721 pulseaudio[1217]: Error opening PCM device hw:1: File o directory non esistente
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~

valter@valter-MS-7721:~$ ^C
valter@valter-MS-7721:~$ 

Scusa, questa riga lho dovuta copiare a pezzi!
gen 27 22:04:21 valter-MS-7721 pulseaudio[1217]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, th>
oReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was>
e message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
E' meglio star zitti e dare l'impressione di essere scemo, che aprir bocca a sproposito e togliere ogni ragionevole dubbio!
Avatar utente
Valgio63
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 328
Iscrizione: lunedì 10 ottobre 2011, 16:41
Desktop: mate
Distribuzione: Ubuntu 20.04.3 LTS
Sesso: Maschile
Località: Firenze

Re: Si è verificato un problema ad un programma di sistema

Messaggio da Valgio63 »

Dato il comando dxgiusti, questo è il risultato:

Codice: Seleziona tutto

valter@valter-MS-7721:~$ sudo apt update && sudo apt full-upgrade
[sudo] password di valter: 
Trovato:1 http://ppa.launchpad.net/gerardpuig/ppa/ubuntu focal InRelease
Trovato:2 http://it.archive.ubuntu.com/ubuntu focal InRelease                                                                                     
Ignorato:3 http://liveusb.info/multisystem/depot all InRelease                                                                                                                                           
Trovato:4 http://ppa.launchpad.net/musicbrainz-developers/stable/ubuntu focal InRelease                                                                                                                  
Trovato:5 http://it.archive.ubuntu.com/ubuntu focal-updates InRelease                                                                                      
Trovato:6 http://liveusb.info/multisystem/depot all Release                                                                      
Trovato:7 http://it.archive.ubuntu.com/ubuntu focal-backports InRelease                                 
Trovato:8 https://packages.microsoft.com/repos/ms-teams stable InRelease                                
Scaricamento di:9 http://security.ubuntu.com/ubuntu focal-security InRelease [114 kB]
Scaricamento di:11 http://security.ubuntu.com/ubuntu focal-security/universe amd64 c-n-f Metadata [13,0 kB]
Recuperati 127 kB in 2s (74,5 kB/s)        
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
Tutti i pacchetti sono aggiornati.
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
Calcolo dell'aggiornamento... Fatto
0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
valter@valter-MS-7721:~$ 

Quindi non ho riavviato
E' meglio star zitti e dare l'impressione di essere scemo, che aprir bocca a sproposito e togliere ogni ragionevole dubbio!
Avatar utente
dxgiusti
Rampante Reduce
Rampante Reduce
Messaggi: 5372
Iscrizione: lunedì 19 novembre 2007, 14:10
Desktop: Mate
Distribuzione: PCLinuxOS-Mate
Sesso: Maschile
Località: Lodi

Re: Si è verificato un problema ad un programma di sistema

Messaggio da dxgiusti »

vuol dire che è aggiornato e non hai problemi.
Avatar utente
Valgio63
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 328
Iscrizione: lunedì 10 ottobre 2011, 16:41
Desktop: mate
Distribuzione: Ubuntu 20.04.3 LTS
Sesso: Maschile
Località: Firenze

Re: Si è verificato un problema ad un programma di sistema

Messaggio da Valgio63 »

E quindi che faccio? Lo ignoro e chiudo e basta? Da notare che subito dopo l'installazione non lo faceva, ha cominciato dopo qualche giorno, dopo aver cominciato a personalizzare con l'aggiunta di vari programmi.
E' meglio star zitti e dare l'impressione di essere scemo, che aprir bocca a sproposito e togliere ogni ragionevole dubbio!
caturen
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 17932
Iscrizione: giovedì 8 aprile 2010, 18:41
Desktop: diversi
Distribuzione: debian

Re: Si è verificato un problema ad un programma di sistema

Messaggio da caturen »

Avatar utente
Valgio63
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 328
Iscrizione: lunedì 10 ottobre 2011, 16:41
Desktop: mate
Distribuzione: Ubuntu 20.04.3 LTS
Sesso: Maschile
Località: Firenze

Re: [Risolto]Si è verificato un problema ad un programma di sistema

Messaggio da Valgio63 »

Ho risolto.
Seguendo le indicazioni nel link postato da caturen, ho spostato i file contenuti in

Codice: Seleziona tutto

/var/crash
nella cartella crash creata nella home, poi ho cancellato il contenuto di

Codice: Seleziona tutto

/var/crash
con il comando

Codice: Seleziona tutto

sudo rm /var/crash/*
.
Ho quindi riavviato e......sparito il difetto e nella cartella

Codice: Seleziona tutto

/var/crash
non c'è niente.
Grazie dell'aiuto.
E' meglio star zitti e dare l'impressione di essere scemo, che aprir bocca a sproposito e togliere ogni ragionevole dubbio!
Scrivi risposta

Ritorna a “MATE”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 13 ospiti