[Install] Errore gnome dopo installazione Ubuntu 9.04

[HAVEADREAM]

Una volta installato Ubuntu 9.04, mi è comparso questo errore:

"IL PANNELLO HA RISCONTRATO UN PROBLEMA DURANTE IL CARICAMENTO DI OAFIID:GNOME_PANEL_TRASHAPPLET"

Mi veniva data in opzione al possibilità di eliminare o meno l'applet dalla propria configurazione, ma per prudenza non l'ho eliminato.

Se devo esser sincero, mi sembra che funziona tutto comunque, a parte un errore iniziale in fase di avvio del pc: anzichè la pagina dove viene chiesto l'user e la passoword, mi compaiono tutte scritte di errore, e mi tocca riavviare...e non sempre mi parte, perchè rilegge lo stesso errore.
Non so se la cosa è da collegare al problema Gnome o meno, comunque se ricapita faccio una foto e la allego.

[maveloth]

Prova ad dirgli di eliminare l'applet e successivamente a desktop avviato clicchi con il tasto destro del mouse sul pannello, selezioni "aggiungi al pannello" e selezioni il trash applet.

Maveloth

[HAVEADREAM]

@maveloth

mica ho capito tanto. Come lo elimino l'applet se non so dov'è?

[maveloth]

quando ti comare l'errore ti chiede se lo vuoi eliminare e te digli di si...

poi a Desktop avviato aggiungi di nuovo l'applet al pannello

Maveloth

[HAVEADREAM]

Probabile che io abbia formulato male il problema.
La scritta mi è comparsa una sola volta, al primo avvio sul desktop di Ubuntu 9.04. Poi basta.

L'altro errore, quello PRIMA dell'avvio con tutte le scritte tipo DOS, non ho avuto modo ovviamente di trascriverlo perchè riempie tutto il schermo. Stamane è già la seconda volta, e ho dovuto riavviare per ben tre volte prima che il Pc si avviasse normalmente.
Riesco a leggere ERROR e poi altre scritte, ma la prossima volta come dicevo faccio una foto e la posto.

[maveloth]

ok allora resto in attesa di una foto...  altrimenti intanto posta l'output del comando

Codice: Seleziona tutto

sudo cat /var/log/errors.log

Maveloth

[HAVEADREAM]

ecco qua

salvatore@salvatore-desktop:~$ sudo cat /var/log/errors.log
[sudo] password for salvatore:
cat: /var/log/errors.log: Nessun file o directory
salvatore@salvatore-desktop:~$

[maveloth]

scusa errore mio....  :-[ prova con questo

Codice: Seleziona tutto

sudo cat /var/log/kernel.log.0

e questo

Codice: Seleziona tutto

sudo cat /var/log/faillog

Maveloth

[HAVEADREAM]

Ecco i risultati:

Codice: Seleziona tutto

salvatore@salvatore-desktop:~$ sudo cat /var/log/kernel.log.0
[sudo] password for salvatore: 
cat: /var/log/kernel.log.0: Nessun file o directory
salvatore@salvatore-desktop:~$ 

con il comando

Codice: Seleziona tutto

sudo cat /var/log/faillog

non mi da nulla

Comunque all'avvio stamane mi ha dato nuovamente un errore. Posterò più tardi la foto....tempo di trovare il modo di toglierla dal telefono e portarla su Linux. 

[maveloth]

..

Codice: Seleziona tutto

sudo cat /var/log/kern.log.0

sono un viziato del completamento automatico del terminale mi devi scusare....
poi ultimamente uso ubuntu solo su macchine virtuali quindi nella distro che sto usando i nomi dei log sono un po diversi...

Maveloth

[HAVEADREAM]

sono un viziato del completamento automatico del terminale mi devi scusare....

Figurati; anzi, grazie dell'aiuto.

Ecco cosa mi appare:

Codice: Seleziona tutto

May 30 12:27:02 salvatore-desktop kernel: [    1.212983] HugeTLB registered 4 MB page size, pre-allocated 0 pages
May 30 12:27:02 salvatore-desktop kernel: [    1.214472] VFS: Disk quotas dquot_6.5.1
May 30 12:27:02 salvatore-desktop kernel: [    1.214566] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 30 12:27:02 salvatore-desktop kernel: [    1.215353] fuse init (API version 7.10)
May 30 12:27:02 salvatore-desktop kernel: [    1.215485] msgmni has been set to 1725
May 30 12:27:02 salvatore-desktop kernel: [    1.215758] alg: No test for stdrng (krng)
May 30 12:27:02 salvatore-desktop kernel: [    1.215785] io scheduler noop registered
May 30 12:27:02 salvatore-desktop kernel: [    1.215788] io scheduler anticipatory registered
May 30 12:27:02 salvatore-desktop kernel: [    1.215792] io scheduler deadline registered
May 30 12:27:02 salvatore-desktop kernel: [    1.215815] io scheduler cfq registered (default)
May 30 12:27:02 salvatore-desktop kernel: [    1.215840] PCI: VIA PCI bridge detected.Disabling DAC.
May 30 12:27:02 salvatore-desktop kernel: [    1.215945] pci 0000:01:00.0: Boot video device
May 30 12:27:02 salvatore-desktop kernel: [    1.225065] pcieport-driver 0000:00:03.0: setting latency timer to 64
May 30 12:27:02 salvatore-desktop kernel: [    1.225126] pcieport-driver 0000:00:03.0: found MSI capability
May 30 12:27:02 salvatore-desktop kernel: [    1.225180] pcieport-driver 0000:00:03.0: irq 2303 for MSI/MSI-X
May 30 12:27:02 salvatore-desktop kernel: [    1.225201] pci_express 0000:00:03.0:pcie00: allocate port service
May 30 12:27:02 salvatore-desktop kernel: [    1.225221] pci_express 0000:00:03.0:pcie01: allocate port service
May 30 12:27:02 salvatore-desktop kernel: [    1.225237] pci_express 0000:00:03.0:pcie02: allocate port service
May 30 12:27:02 salvatore-desktop kernel: [    1.225254] pci_express 0000:00:03.0:pcie03: allocate port service
May 30 12:27:02 salvatore-desktop kernel: [    1.230359] aer 0000:00:03.0:pcie01: service driver aer loaded
May 30 12:27:02 salvatore-desktop kernel: [    1.230371] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 30 12:27:02 salvatore-desktop kernel: [    1.231020] pciehp 0000:00:03.0:pcie02: HPC vendor_id 1106 device_id c327 ss_vid 0 ss_did 0
May 30 12:27:02 salvatore-desktop kernel: [    1.231068] pciehp 0000:00:03.0:pcie02: service driver pciehp loaded
May 30 12:27:02 salvatore-desktop kernel: [    1.231082] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
May 30 12:27:02 salvatore-desktop kernel: [    1.231280] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
May 30 12:27:02 salvatore-desktop kernel: [    1.231283] ACPI: Power Button (FF) [PWRF]
May 30 12:27:02 salvatore-desktop kernel: [    1.231337] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
May 30 12:27:02 salvatore-desktop kernel: [    1.231340] ACPI: Power Button (CM) [PWRB]
May 30 12:27:02 salvatore-desktop kernel: [    1.231390] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
May 30 12:27:02 salvatore-desktop kernel: [    1.231398] ACPI: Sleep Button (CM) [SLPB]
May 30 12:27:02 salvatore-desktop kernel: [    1.231473] fan PNP0C0B:00: registered as cooling_device0
May 30 12:27:02 salvatore-desktop kernel: [    1.231480] ACPI: Fan [FAN] (on)
May 30 12:27:02 salvatore-desktop kernel: [    1.232526] ACPI Error (psparse-0524): Method parse/execution failed [\_PR_.CPU0._PDC] (Node f6c4b138), AE_ALREADY_EXISTS
May 30 12:27:02 salvatore-desktop kernel: [    1.232538] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
May 30 12:27:02 salvatore-desktop kernel: [    1.232606] processor ACPI_CPU:00: registered as cooling_device1
May 30 12:27:02 salvatore-desktop kernel: [    1.232832] ACPI: SSDT 3BEEB2D0, 00CE (r1 AWARD  ASUSACPI 42302E31 AWRD        0)
May 30 12:27:02 salvatore-desktop kernel: [    1.233301] processor ACPI_CPU:01: registered as cooling_device2
May 30 12:27:02 salvatore-desktop kernel: [    1.239879] thermal LNXTHERM:01: registered as thermal_zone0
May 30 12:27:02 salvatore-desktop kernel: [    1.240277] ACPI: Thermal Zone [THRM] (40 C)
May 30 12:27:02 salvatore-desktop kernel: [    1.240338] isapnp: Scanning for PnP cards...
May 30 12:27:02 salvatore-desktop kernel: [    1.591901] isapnp: No Plug & Play device found
May 30 12:27:02 salvatore-desktop kernel: [    1.604793] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
May 30 12:27:02 salvatore-desktop kernel: [    1.604893] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 30 12:27:02 salvatore-desktop kernel: [    1.605330] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 30 12:27:02 salvatore-desktop kernel: [    1.606337] brd: module loaded
May 30 12:27:02 salvatore-desktop kernel: [    1.606742] loop: module loaded
May 30 12:27:02 salvatore-desktop kernel: [    1.606824] Fixed MDIO Bus: probed
May 30 12:27:02 salvatore-desktop kernel: [    1.606830] PPP generic driver version 2.4.2
May 30 12:27:02 salvatore-desktop kernel: [    1.606896] input: Macintosh mouse button emulation as /devices/virtual/input/input3
May 30 12:27:02 salvatore-desktop kernel: [    1.606931] Driver 'sd' needs updating - please use bus_type methods
May 30 12:27:02 salvatore-desktop kernel: [    1.606943] Driver 'sr' needs updating - please use bus_type methods
May 30 12:27:02 salvatore-desktop kernel: [    1.606991] ahci 0000:03:00.0: version 3.0
May 30 12:27:02 salvatore-desktop kernel: [    1.607013] ahci 0000:03:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
May 30 12:27:02 salvatore-desktop kernel: [    1.607089] ahci 0000:03:00.0: PCI: Disallowing DAC for device
May 30 12:27:02 salvatore-desktop kernel: [    1.620035] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
May 30 12:27:02 salvatore-desktop kernel: [    1.620040] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
May 30 12:27:02 salvatore-desktop kernel: [    1.620048] ahci 0000:03:00.0: setting latency timer to 64
May 30 12:27:02 salvatore-desktop kernel: [    1.620321] scsi0 : ahci
May 30 12:27:02 salvatore-desktop kernel: [    1.620476] scsi1 : ahci
May 30 12:27:02 salvatore-desktop kernel: [    1.620549] ata1: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe100 irq 28
May 30 12:27:02 salvatore-desktop kernel: [    1.620553] ata2: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe180 irq 28
May 30 12:27:02 salvatore-desktop kernel: [    1.940027] ata1: SATA link down (SStatus 0 SControl 300)
May 30 12:27:02 salvatore-desktop kernel: [    2.276026] ata2: SATA link down (SStatus 0 SControl 300)
May 30 12:27:02 salvatore-desktop kernel: [    2.292186] sata_via 0000:00:0f.0: version 2.4
May 30 12:27:02 salvatore-desktop kernel: [    2.292202] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
May 30 12:27:02 salvatore-desktop kernel: [    2.292248] sata_via 0000:00:0f.0: routed to hard irq line 11
May 30 12:27:02 salvatore-desktop kernel: [    2.292358] scsi2 : sata_via
May 30 12:27:02 salvatore-desktop kernel: [    2.292460] scsi3 : sata_via
May 30 12:27:02 salvatore-desktop kernel: [    2.294551] ata3: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
May 30 12:27:02 salvatore-desktop kernel: [    2.294554] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
May 30 12:27:02 salvatore-desktop kernel: [    2.496018] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 30 12:27:02 salvatore-desktop kernel: [    2.660395] ata3.00: ATA-7: MAXTOR STM3250310AS, 3.AAF, max UDMA/133
May 30 12:27:02 salvatore-desktop kernel: [    2.660399] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
May 30 12:27:02 salvatore-desktop kernel: [    2.676386] ata3.00: configured for UDMA/133
May 30 12:27:02 salvatore-desktop kernel: [    2.880016] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
May 30 12:27:02 salvatore-desktop kernel: [    2.890280] scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
May 30 12:27:02 salvatore-desktop kernel: [    2.890398] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
May 30 12:27:02 salvatore-desktop kernel: [    2.890420] sd 2:0:0:0: [sda] Write Protect is off
May 30 12:27:02 salvatore-desktop kernel: [    2.890423] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 30 12:27:02 salvatore-desktop kernel: [    2.890458] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 30 12:27:02 salvatore-desktop kernel: [    2.890537] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
May 30 12:27:02 salvatore-desktop kernel: [    2.890556] sd 2:0:0:0: [sda] Write Protect is off
May 30 12:27:02 salvatore-desktop kernel: [    2.890559] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 30 12:27:02 salvatore-desktop kernel: [    2.890593] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 30 12:27:02 salvatore-desktop kernel: [    2.890597]  sda: sda1 sda2 < sda5 >
May 30 12:27:02 salvatore-desktop kernel: [    2.927874] sd 2:0:0:0: [sda] Attached SCSI disk
May 30 12:27:02 salvatore-desktop kernel: [    2.927955] sd 2:0:0:0: Attached scsi generic sg0 type 0
May 30 12:27:02 salvatore-desktop kernel: [    2.928399] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
May 30 12:27:02 salvatore-desktop kernel: [    2.928420] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29
May 30 12:27:02 salvatore-desktop kernel: [    2.928476] pata_jmicron 0000:03:00.1: setting latency timer to 64
May 30 12:27:02 salvatore-desktop kernel: [    2.928562] scsi4 : pata_jmicron
May 30 12:27:02 salvatore-desktop kernel: [    2.928648] scsi5 : pata_jmicron
May 30 12:27:02 salvatore-desktop kernel: [    2.928704] ata5: PATA max UDMA/100 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 29
May 30 12:27:02 salvatore-desktop kernel: [    2.928707] ata6: PATA max UDMA/100 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 29
May 30 12:27:02 salvatore-desktop kernel: [    3.250416] pata_via 0000:00:0f.1: version 0.3.3
May 30 12:27:02 salvatore-desktop kernel: [    3.250611] scsi6 : pata_via
May 30 12:27:02 salvatore-desktop kernel: [    3.250676] scsi7 : pata_via
May 30 12:27:02 salvatore-desktop kernel: [    3.252632] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
May 30 12:27:02 salvatore-desktop kernel: [    3.252635] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
May 30 12:27:02 salvatore-desktop kernel: [    3.416415] ata7.00: ATAPI: PIONEER DVD-RW  DVR-112D, 1.21, max UDMA/66
May 30 12:27:02 salvatore-desktop kernel: [    3.432316] ata7.00: configured for UDMA/66
May 30 12:27:02 salvatore-desktop kernel: [    3.597810] scsi 6:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-112D 1.21 PQ: 0 ANSI: 5
May 30 12:27:02 salvatore-desktop kernel: [    3.616060] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
May 30 12:27:02 salvatore-desktop kernel: [    3.616066] Uniform CD-ROM driver Revision: 3.20
May 30 12:27:02 salvatore-desktop kernel: [    3.616201] sr 6:0:0:0: Attached scsi CD-ROM sr0
May 30 12:27:02 salvatore-desktop kernel: [    3.616251] sr 6:0:0:0: Attached scsi generic sg1 type 5
May 30 12:27:02 salvatore-desktop kernel: [    3.616430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 30 12:27:02 salvatore-desktop kernel: [    3.616455] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
May 30 12:27:02 salvatore-desktop kernel: [    3.616480] ehci_hcd 0000:00:10.4: EHCI Host Controller
May 30 12:27:02 salvatore-desktop kernel: [    3.616552] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
May 30 12:27:02 salvatore-desktop kernel: [    3.616595] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
May 30 12:27:02 salvatore-desktop kernel: [    3.628018] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
May 30 12:27:02 salvatore-desktop kernel: [    3.628121] usb usb1: configuration #1 chosen from 1 choice
May 30 12:27:02 salvatore-desktop kernel: [    3.628156] hub 1-0:1.0: USB hub found
May 30 12:27:02 salvatore-desktop kernel: [    3.628165] hub 1-0:1.0: 8 ports detected
May 30 12:27:02 salvatore-desktop kernel: [    3.628302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 30 12:27:02 salvatore-desktop kernel: [    3.628323] uhci_hcd: USB Universal Host Controller Interface driver
May 30 12:27:02 salvatore-desktop kernel: [    3.628357] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
May 30 12:27:02 salvatore-desktop kernel: [    3.628365] uhci_hcd 0000:00:10.0: UHCI Host Controller
May 30 12:27:02 salvatore-desktop kernel: [    3.628420] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
May 30 12:27:02 salvatore-desktop kernel: [    3.628467] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
May 30 12:27:02 salvatore-desktop kernel: [    3.628560] usb usb2: configuration #1 chosen from 1 choice
May 30 12:27:02 salvatore-desktop kernel: [    3.628591] hub 2-0:1.0: USB hub found
May 30 12:27:02 salvatore-desktop kernel: [    3.628602] hub 2-0:1.0: 2 ports detected
May 30 12:27:02 salvatore-desktop kernel: [    3.628705] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
May 30 12:27:02 salvatore-desktop kernel: [    3.628713] uhci_hcd 0000:00:10.1: UHCI Host Controller
May 30 12:27:02 salvatore-desktop kernel: [    3.628764] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
May 30 12:27:02 salvatore-desktop kernel: [    3.628813] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000dc00
May 30 12:27:02 salvatore-desktop kernel: [    3.628908] usb usb3: configuration #1 chosen from 1 choice
May 30 12:27:02 salvatore-desktop kernel: [    3.628940] hub 3-0:1.0: USB hub found
May 30 12:27:02 salvatore-desktop kernel: [    3.628949] hub 3-0:1.0: 2 ports detected
May 30 12:27:02 salvatore-desktop kernel: [    3.629049] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
May 30 12:27:02 salvatore-desktop kernel: [    3.629057] uhci_hcd 0000:00:10.2: UHCI Host Controller
May 30 12:27:02 salvatore-desktop kernel: [    3.629106] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
May 30 12:27:02 salvatore-desktop kernel: [    3.629128] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
May 30 12:27:02 salvatore-desktop kernel: [    3.629216] usb usb4: configuration #1 chosen from 1 choice
May 30 12:27:02 salvatore-desktop kernel: [    3.629247] hub 4-0:1.0: USB hub found
May 30 12:27:02 salvatore-desktop kernel: [    3.629256] hub 4-0:1.0: 2 ports detected
May 30 12:27:02 salvatore-desktop kernel: [    3.629365] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
May 30 12:27:02 salvatore-desktop kernel: [    3.629373] uhci_hcd 0000:00:10.3: UHCI Host Controller
May 30 12:27:02 salvatore-desktop kernel: [    3.629423] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
May 30 12:27:02 salvatore-desktop kernel: [    3.629469] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d400
May 30 12:27:02 salvatore-desktop kernel: [    3.629558] usb usb5: configuration #1 chosen from 1 choice
May 30 12:27:02 salvatore-desktop kernel: [    3.629589] hub 5-0:1.0: USB hub found
May 30 12:27:02 salvatore-desktop kernel: [    3.629599] hub 5-0:1.0: 2 ports detected
May 30 12:27:02 salvatore-desktop kernel: [    3.629740] usbcore: registered new interface driver libusual
May 30 12:27:02 salvatore-desktop kernel: [    3.629783] usbcore: registered new interface driver usbserial
May 30 12:27:02 salvatore-desktop kernel: [    3.629798] USB Serial support registered for generic
May 30 12:27:02 salvatore-desktop kernel: [    3.629818] usbcore: registered new interface driver usbserial_generic
May 30 12:27:02 salvatore-desktop kernel: [    3.629820] usbserial: USB Serial Driver core
May 30 12:27:02 salvatore-desktop kernel: [    3.629883] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
May 30 12:27:02 salvatore-desktop kernel: [    3.629886] PNP: PS/2 controller doesn't have KBD irq; using default 1
May 30 12:27:02 salvatore-desktop kernel: [    3.630288] serio: i8042 KBD port at 0x60,0x64 irq 1
May 30 12:27:02 salvatore-desktop kernel: [    3.630296] serio: i8042 AUX port at 0x60,0x64 irq 12
May 30 12:27:02 salvatore-desktop kernel: [    3.632077] mice: PS/2 mouse device common for all mice
May 30 12:27:02 salvatore-desktop kernel: [    3.632301] rtc_cmos 00:05: RTC can wake from S4
May 30 12:27:02 salvatore-desktop kernel: [    3.632344] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
May 30 12:27:02 salvatore-desktop kernel: [    3.632396] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
May 30 12:27:02 salvatore-desktop kernel: [    3.632470] device-mapper: uevent: version 1.0.3
May 30 12:27:02 salvatore-desktop kernel: [    3.632611] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
May 30 12:27:02 salvatore-desktop kernel: [    3.632761] device-mapper: multipath: version 1.0.5 loaded
May 30 12:27:02 salvatore-desktop kernel: [    3.632764] device-mapper: multipath round-robin: version 1.0.0 loaded
May 30 12:27:02 salvatore-desktop kernel: [    3.632884] EISA: Probing bus 0 at eisa.0
May 30 12:27:02 salvatore-desktop kernel: [    3.632940] EISA: Detected 0 cards.
May 30 12:27:02 salvatore-desktop kernel: [    3.633030] cpuidle: using governor ladder
May 30 12:27:02 salvatore-desktop kernel: [    3.633033] cpuidle: using governor menu
May 30 12:27:02 salvatore-desktop kernel: [    3.633688] TCP cubic registered
May 30 12:27:02 salvatore-desktop kernel: [    3.633776] NET: Registered protocol family 10
May 30 12:27:02 salvatore-desktop kernel: [    3.634322] lo: Disabled Privacy Extensions
May 30 12:27:02 salvatore-desktop kernel: [    3.634748] NET: Registered protocol family 17
May 30 12:27:02 salvatore-desktop kernel: [    3.634769] Bluetooth: L2CAP ver 2.11
May 30 12:27:02 salvatore-desktop kernel: [    3.634771] Bluetooth: L2CAP socket layer initialized
May 30 12:27:02 salvatore-desktop kernel: [    3.634775] Bluetooth: SCO (Voice Link) ver 0.6
May 30 12:27:02 salvatore-desktop kernel: [    3.634777] Bluetooth: SCO socket layer initialized
May 30 12:27:02 salvatore-desktop kernel: [    3.634828] Bluetooth: RFCOMM socket layer initialized
May 30 12:27:02 salvatore-desktop kernel: [    3.634841] Bluetooth: RFCOMM TTY layer initialized
May 30 12:27:02 salvatore-desktop kernel: [    3.634843] Bluetooth: RFCOMM ver 1.10
May 30 12:27:02 salvatore-desktop kernel: [    3.636377] Using IPI No-Shortcut mode
May 30 12:27:02 salvatore-desktop kernel: [    3.636499] registered taskstats version 1
May 30 12:27:02 salvatore-desktop kernel: [    3.636665]   Magic number: 9:681:427
May 30 12:27:02 salvatore-desktop kernel: [    3.636763] rtc_cmos 00:05: setting system clock to 2009-05-30 10:26:53 UTC (1243679213)
May 30 12:27:02 salvatore-desktop kernel: [    3.636766] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
May 30 12:27:02 salvatore-desktop kernel: [    3.636768] EDD information not available.
May 30 12:27:02 salvatore-desktop kernel: [    3.637209] Freeing unused kernel memory: 532k freed
May 30 12:27:02 salvatore-desktop kernel: [    3.637372] Write protecting the kernel text: 4128k
May 30 12:27:02 salvatore-desktop kernel: [    3.637437] Write protecting the kernel read-only data: 1532k
May 30 12:27:02 salvatore-desktop kernel: [    3.882962] Floppy drive(s): fd0 is 1.44M
May 30 12:27:02 salvatore-desktop kernel: [    3.905076] FDC 0 is a post-1991 82077
May 30 12:27:02 salvatore-desktop kernel: [    3.930566] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
May 30 12:27:02 salvatore-desktop kernel: [    3.930628] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
May 30 12:27:02 salvatore-desktop kernel: [    3.931544] eth0: VIA Rhine II at 0xdfffe000, 00:00:00:00:00:10, IRQ 23.
May 30 12:27:02 salvatore-desktop kernel: [    3.932252] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
May 30 12:27:02 salvatore-desktop kernel: [    4.128536] usb 2-2: new low speed USB device using uhci_hcd and address 2
May 30 12:27:02 salvatore-desktop kernel: [    4.202676] PM: Starting manual resume from disk
May 30 12:27:02 salvatore-desktop kernel: [    4.202680] PM: Resume from partition 8:5
May 30 12:27:02 salvatore-desktop kernel: [    4.202682] PM: Checking hibernation image.
May 30 12:27:02 salvatore-desktop kernel: [    4.202849] PM: Resume from disk failed.
May 30 12:27:02 salvatore-desktop kernel: [    4.258268] kjournald starting.  Commit interval 5 seconds
May 30 12:27:02 salvatore-desktop kernel: [    4.258283] EXT3-fs: mounted filesystem with ordered data mode.
May 30 12:27:02 salvatore-desktop kernel: [    4.338485] usb 2-2: configuration #1 chosen from 1 choice
May 30 12:27:02 salvatore-desktop kernel: [    8.223947] udev: starting version 141
May 30 12:27:02 salvatore-desktop kernel: [    8.332715] parport_pc 00:0a: reported by Plug and Play ACPI
May 30 12:27:02 salvatore-desktop kernel: [    8.332789] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
May 30 12:27:02 salvatore-desktop kernel: [    8.357215] Linux agpgart interface v0.103
May 30 12:27:02 salvatore-desktop kernel: [    8.381949] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 30 12:27:02 salvatore-desktop kernel: [    8.495685] agpgart: Detected VIA P4M890 chipset
May 30 12:27:02 salvatore-desktop kernel: [    8.504115] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
May 30 12:27:02 salvatore-desktop kernel: [    8.872964] ppdev: user-space parallel port driver
May 30 12:27:02 salvatore-desktop kernel: [    8.880901] input: PC Speaker as /devices/platform/pcspkr/input/input4
May 30 12:27:02 salvatore-desktop kernel: [    8.912162] usbcore: registered new interface driver hiddev
May 30 12:27:02 salvatore-desktop kernel: [    8.934864] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input5
May 30 12:27:02 salvatore-desktop kernel: [    8.936200] generic-usb 0003:046D:C310.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:10.0-2/input0
May 30 12:27:02 salvatore-desktop kernel: [    9.009653] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input6
May 30 12:27:02 salvatore-desktop kernel: [    9.011972] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
May 30 12:27:02 salvatore-desktop kernel: [    9.020334] generic-usb 0003:046D:C310.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:10.0-2/input1
May 30 12:27:02 salvatore-desktop kernel: [    9.020368] usbcore: registered new interface driver usbhid
May 30 12:27:02 salvatore-desktop kernel: [    9.020421] usbhid: v2.6:USB HID core driver
May 30 12:27:02 salvatore-desktop kernel: [    9.057197] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
May 30 12:27:02 salvatore-desktop kernel: [    9.057332] HDA Intel 0000:80:01.0: setting latency timer to 64
May 30 12:27:02 salvatore-desktop kernel: [    9.057337] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
May 30 12:27:02 salvatore-desktop kernel: [    9.473034] psmouse serio1: ID: 10 00 64<6>lp0: using parport0 (interrupt-driven).
May 30 12:27:02 salvatore-desktop kernel: [    9.679957] Adding 2811332k swap on /dev/sda5.  Priority:-1 extents:1 across:2811332k
May 30 12:27:02 salvatore-desktop kernel: [   10.099473] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7
May 30 12:27:02 salvatore-desktop kernel: [   10.235466] EXT3 FS on sda1, internal journal
May 30 12:27:02 salvatore-desktop kernel: [   11.359289] type=1505 audit(1243679221.219:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2019
May 30 12:27:02 salvatore-desktop kernel: [   11.408132] type=1505 audit(1243679221.271:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2023
May 30 12:27:02 salvatore-desktop kernel: [   11.408257] type=1505 audit(1243679221.271:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2023
May 30 12:27:02 salvatore-desktop kernel: [   11.408301] type=1505 audit(1243679221.271:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2023
May 30 12:27:02 salvatore-desktop kernel: [   11.408346] type=1505 audit(1243679221.271:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2023
May 30 12:27:02 salvatore-desktop kernel: [   11.541899] type=1505 audit(1243679221.403:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2028
May 30 12:27:02 salvatore-desktop kernel: [   11.542117] type=1505 audit(1243679221.403:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2028
May 30 12:27:02 salvatore-desktop kernel: [   11.571441] type=1505 audit(1243679221.431:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2032
May 30 12:27:03 salvatore-desktop kernel: [   13.475001] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
May 30 12:27:03 salvatore-desktop kernel: [   13.475005] Bluetooth: BNEP filters: protocol multicast
May 30 12:27:03 salvatore-desktop kernel: [   13.493588] Bridge firewalling registered
May 30 12:27:04 salvatore-desktop kernel: [   14.640253] [drm] Initialized drm 1.1.0 20060810
May 30 12:27:04 salvatore-desktop kernel: [   14.668251] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 30 12:27:04 salvatore-desktop kernel: [   14.668857] [drm] Initialized via 2.11.1 20070202 on minor 0
May 30 12:27:04 salvatore-desktop kernel: [   14.835357] agpgart-via 0000:00:00.0: AGP 3.5 bridge
May 30 12:27:04 salvatore-desktop kernel: [   14.835388] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
May 30 12:27:04 salvatore-desktop kernel: [   14.835517] pci 0000:01:00.0: putting AGP V3 device into 8x mode
May 30 12:27:07 salvatore-desktop kernel: [   17.953580] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
May 30 12:27:08 salvatore-desktop kernel: [   18.139948] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 30 12:27:18 salvatore-desktop kernel: [   28.376083] eth0: no IPv6 routers present
May 30 12:31:26 salvatore-desktop kernel: [  276.610261] udev: starting version 141
May 30 12:32:00 salvatore-desktop kernel: [  310.693449] type=1505 audit(1243679520.555:10): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=5691
May 30 12:32:00 salvatore-desktop kernel: [  310.762522] type=1505 audit(1243679520.623:11): operation="profile_replace" name="/sbin/dhclient-script" name2="default" pid=5695
May 30 12:32:00 salvatore-desktop kernel: [  310.762858] type=1505 audit(1243679520.623:12): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=5695
May 30 12:32:00 salvatore-desktop kernel: [  310.762926] type=1505 audit(1243679520.623:13): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=5695
May 30 12:32:00 salvatore-desktop kernel: [  310.762988] type=1505 audit(1243679520.623:14): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=5695
May 30 12:32:00 salvatore-desktop kernel: [  310.910201] type=1505 audit(1243679520.771:15): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=5700
May 30 12:32:00 salvatore-desktop kernel: [  310.910580] type=1505 audit(1243679520.771:16): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=5700
May 30 12:32:00 salvatore-desktop kernel: [  310.951876] type=1505 audit(1243679520.811:17): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=5704
salvatore@salvatore-desktop:~$