Re: Ubuntu 9.04 non si avvia se sono collegate periferiche usb
Inviato: mercoledì 28 ottobre 2009, 11:13
e qualcosa già precompilato non si trova che possa andar bene anche per il mio notebook?
Il forum della comunità italiana di Ubuntu.
https://forum.ubuntu-it.org/
Ci abbiamo già guardato ricordi? L'elenco dei pc per cui era stata ricompilata la DSDT....miticogigi ha scritto: e qualcosa già precompilato non si trova che possa andar bene anche per il mio notebook?
dimmi dove la devo aggiungere che provo subitopieddu ha scritto: hai provato l'opzione "noacpi"
Codice: Seleziona tutto
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b22d5361-dbdf-44aa-bb6b-5ba68064406a ro noacpiCodice: Seleziona tutto
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid b22d5361-dbdf-44aa-bb6b-5ba68064406a
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b22d5361-dbdf-44aa-bb6b-5ba68064406a ro noacpi
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid b22d5361-dbdf-44aa-bb6b-5ba68064406a
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=b22d5361-dbdf-44aa-bb6b-5ba68064406a ro single
initrd /boot/initrd.img-2.6.28-16-genericVai sul sito del produttore e segui le istruzioni.miticogigi ha scritto: no mai...e non so neppure come si fa
Occhio!miticogigi ha scritto: ora ci provo e ti faccio sapere
le ho trovate sul sito dell'asus...che dici?Scaricare il file BIOS corretto dalla pagina apposita (http://www.asus.it/support/download/download.aspx). Per riconoscere il modello controllare sull’etichetta del serial number (codice a barre sul retro della macchina) l’ultima lettera stampata indica il modello!
Scaricare l'utility phlash.zip. Decomprimere i due file (bios e phlash.zip) su un dischetto d'avvio (formattato con l’opzione 'trasferire i file di sistema' selezionata). Spegnere il pc e farlo ripartire dall’unita’ floppy con il dischetto inserito nel lettore.
Al comando a: (prompt di dos) digitare phlash/mode=3 nomefilebios.rom dove nomefilebios corrisponde al nome del file del bios decompresso.
Codice: Seleziona tutto
dmesg
[ 0.145633] ACPI: Checking initramfs for custom DSDT
[ 0.458006] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.497693] CPU0: AMD Turion(tm) 64 Mobile Technology MT-32 stepping 02
[ 0.500001] Brought up 1 CPUs
[ 0.500001] Total of 1 processors activated (3600.09 BogoMIPS).
[ 0.500001] CPU0 attaching NULL sched-domain.
[ 0.500001] net_namespace: 776 bytes
[ 0.500001] Booting paravirtualized kernel on bare hardware
[ 0.500001] Time: 13:23:43 Date: 10/28/09
[ 0.500001] regulator: core version 0.5
[ 0.500001] NET: Registered protocol family 16
[ 0.500001] EISA bus registered
[ 0.500001] ACPI: bus type pci registered
[ 0.500001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.500001] PCI: Not using MMCONFIG.
[ 0.500001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.500001] PCI: Using configuration type 1 for base access
[ 0.500001] ACPI: EC: Look up EC in DSDT
[ 0.500973] ACPI Warning (dsobject-0501): Package List length (EA) larger than NumElements count (3), truncated
[ 0.500978] [20080926]
[ 0.510112] ACPI: Interpreter enabled
[ 0.510117] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.510142] ACPI: Using IOAPIC for interrupt routing
[ 0.510209] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.514089] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.514092] PCI: Using MMCONFIG for extended config space
[ 0.521483] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.521485] ACPI: EC: driver started in poll mode
[ 0.521620] ACPI: No dock devices found.
[ 0.521703] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.521833] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.521837] pci 0000:00:01.0: PME# disabled
[ 0.521916] pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf]
[ 0.521931] pci 0000:00:02.5: PME# supported from D3cold
[ 0.521934] pci 0000:00:02.5: PME# disabled
[ 0.521959] pci 0000:00:02.6: reg 10 io port: [0xe800-0xe8ff]
[ 0.521965] pci 0000:00:02.6: reg 14 io port: [0xec00-0xec7f]
[ 0.521991] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.521994] pci 0000:00:02.6: PME# disabled
[ 0.522019] pci 0000:00:02.7: reg 10 io port: [0xe400-0xe4ff]
[ 0.522025] pci 0000:00:02.7: reg 14 io port: [0xe000-0xe07f]
[ 0.522050] pci 0000:00:02.7: supports D1 D2
[ 0.522052] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.522056] pci 0000:00:02.7: PME# disabled
[ 0.522074] pci 0000:00:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
[ 0.522111] pci 0000:00:03.1: reg 10 32bit mmio: [0xfebfe000-0xfebfefff]
[ 0.522147] pci 0000:00:03.2: reg 10 32bit mmio: [0xfebfd000-0xfebfdfff]
[ 0.522191] pci 0000:00:03.3: reg 10 32bit mmio: [0xfebfc000-0xfebfcfff]
[ 0.522218] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.522221] pci 0000:00:03.3: PME# disabled
[ 0.522246] pci 0000:00:09.0: reg 10 32bit mmio: [0xfebfa000-0xfebfbfff]
[ 0.522291] pci 0000:00:0a.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.522298] pci 0000:00:0a.0: supports D1 D2
[ 0.522300] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.522304] pci 0000:00:0a.0: PME# disabled
[ 0.522329] pci 0000:00:0a.1: reg 10 32bit mmio: [0xfebf9800-0xfebf9fff]
[ 0.522356] pci 0000:00:0a.1: PME# supported from D0 D3hot D3cold
[ 0.522360] pci 0000:00:0a.1: PME# disabled
[ 0.522384] pci 0000:00:0a.2: reg 10 32bit mmio: [0xfebf9400-0xfebf94ff]
[ 0.522411] pci 0000:00:0a.2: supports D1 D2
[ 0.522413] pci 0000:00:0a.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.522417] pci 0000:00:0a.2: PME# disabled
[ 0.522443] pci 0000:00:0a.3: reg 10 32bit mmio: [0xfebf9000-0xfebf90ff]
[ 0.522470] pci 0000:00:0a.3: supports D1 D2
[ 0.522472] pci 0000:00:0a.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.522475] pci 0000:00:0a.3: PME# disabled
[ 0.522504] pci 0000:00:0b.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.522510] pci 0000:00:0b.0: reg 14 32bit mmio: [0xfebf8c00-0xfebf8cff]
[ 0.522530] pci 0000:00:0b.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[ 0.522538] pci 0000:00:0b.0: supports D1 D2
[ 0.522540] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
[ 0.522543] pci 0000:00:0b.0: PME# disabled
[ 0.522668] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.522677] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.522686] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[ 0.522695] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe2e0000-0xfe2fffff]
[ 0.522731] pci 0000:00:01.0: bridge 32bit mmio: [0xfa200000-0xfe2fffff]
[ 0.522737] pci 0000:00:01.0: bridge 64bit mmio pref: [0xbde00000-0xddefffff]
[ 0.522757] bus 00 -> node 0
[ 0.522765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.523023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.539085] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.539257] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.539424] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.539593] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.539760] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.539927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
[ 0.540106] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.540274] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.540396] ACPI: Power Resource [GFAN] (off)
[ 0.540469] ACPI: WMI: Mapper loaded
[ 0.540650] SCSI subsystem initialized
[ 0.540690] libata version 3.00 loaded.
[ 0.540735] usbcore: registered new interface driver usbfs
[ 0.540752] usbcore: registered new interface driver hub
[ 0.540776] usbcore: registered new device driver usb
[ 0.540886] PCI: Using ACPI for IRQ routing
[ 0.540978] Bluetooth: Core ver 2.13
[ 0.540978] NET: Registered protocol family 31
[ 0.540978] Bluetooth: HCI device and connection manager initialized
[ 0.540978] Bluetooth: HCI socket layer initialized
[ 0.540978] NET: Registered protocol family 8
[ 0.540978] NET: Registered protocol family 20
[ 0.540978] NetLabel: Initializing
[ 0.540978] NetLabel: domain hash size = 128
[ 0.540978] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.540978] NetLabel: unlabeled traffic allowed by default
[ 0.540978] AppArmor: AppArmor Filesystem Enabled
[ 0.540978] pnp: PnP ACPI init
[ 0.540978] ACPI: bus type pnp registered
[ 0.545080] pnp: PnP ACPI: found 14 devices
[ 0.545082] ACPI: ACPI bus type pnp unregistered
[ 0.545086] PnPBIOS: Disabled by ACPI PNP
[ 0.545098] system 00:09: ioport range 0xa00-0xa0f has been reserved
[ 0.545104] system 00:0a: ioport range 0x480-0x48f has been reserved
[ 0.545106] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.545109] system 00:0a: ioport range 0x800-0x8df has been reserved
[ 0.545112] system 00:0a: ioport range 0x8e0-0x8ff has been reserved
[ 0.545116] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.545119] system 00:0a: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.545122] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.545125] system 00:0a: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.545130] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.545133] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.545139] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.545144] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.545147] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.545150] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.545153] system 00:0d: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.579831] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.579833] pci 0000:00:01.0: IO window: disabled
[ 0.579838] pci 0000:00:01.0: MEM window: 0xfa200000-0xfe2fffff
[ 0.579843] pci 0000:00:01.0: PREFETCH window: 0x000000bde00000-0x000000ddefffff
[ 0.579849] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 0.579851] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
[ 0.579855] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
[ 0.579859] pci 0000:00:0a.0: PREFETCH window: 0x30000000-0x33ffffff
[ 0.579863] pci 0000:00:0a.0: MEM window: 0x34000000-0x37ffffff
[ 0.579875] pci 0000:00:01.0: setting latency timer to 64
[ 0.579885] pci 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.579891] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.579893] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.579895] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.579897] bus: 01 index 1 mmio: [0xfa200000-0xfe2fffff]
[ 0.579900] bus: 01 index 2 mmio: [0xbde00000-0xddefffff]
[ 0.579902] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.579904] bus: 02 index 0 io port: [0x1000-0x10ff]
[ 0.579906] bus: 02 index 1 io port: [0x1400-0x14ff]
[ 0.579909] bus: 02 index 2 mmio: [0x30000000-0x33ffffff]
[ 0.579911] bus: 02 index 3 mmio: [0x34000000-0x37ffffff]
[ 0.579923] NET: Registered protocol family 2
[ 0.580041] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.580285] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.580402] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.580514] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.580517] TCP reno registered
[ 0.580581] NET: Registered protocol family 1
[ 0.580708] checking if image is initramfs... it is
[ 1.080042] Switched to high resolution mode on CPU 0
[ 1.218042] Freeing initrd memory: 7323k freed
[ 1.218147] cpufreq: No nForce2 chipset.
[ 1.218287] audit: initializing netlink socket (disabled)
[ 1.218305] type=2000 audit(1256736224.216:1): initialized
[ 1.226851] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.228092] VFS: Disk quotas dquot_6.5.1
[ 1.228145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.228724] fuse init (API version 7.10)
[ 1.228802] msgmni has been set to 993
[ 1.228969] alg: No test for stdrng (krng)
[ 1.228980] io scheduler noop registered
[ 1.228982] io scheduler anticipatory registered
[ 1.228984] io scheduler deadline registered
[ 1.228999] io scheduler cfq registered (default)
[ 1.229083] pci 0000:01:00.0: Boot video device
[ 1.232090] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.232121] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.232141] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.232150] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.232214] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.232222] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.232348] ACPI: AC Adapter [AC0] (on-line)
[ 1.232763] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.293763] ACPI: Battery Slot [BAT0] (battery present)
[ 1.293829] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.293832] ACPI: Power Button (FF) [PWRF]
[ 1.293881] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.293884] ACPI: Power Button (CM) [PWRB]
[ 1.293925] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.296067] ACPI: Lid Switch [LID]
[ 1.296112] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.296118] ACPI: Sleep Button (CM) [SLPB]
[ 1.296246] fan PNP0C0B:00: registered as cooling_device0
[ 1.296251] ACPI: Fan [FN00] (off)
[ 1.296485] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.296502] processor ACPI_CPU:00: registered as cooling_device1
[ 1.296506] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.312083] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.314518] ACPI: Thermal Zone [THRM] (62 C)
[ 1.314557] isapnp: Scanning for PnP cards...
[ 1.668011] isapnp: No Plug & Play device found
[ 1.669185] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.669307] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.669572] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.669578] serial 0000:00:02.6: PCI INT C disabled
[ 1.670236] brd: module loaded
[ 1.670526] loop: module loaded
[ 1.670591] Fixed MDIO Bus: probed
[ 1.670597] PPP generic driver version 2.4.2
[ 1.670651] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.670676] Driver 'sd' needs updating - please use bus_type methods
[ 1.670684] Driver 'sr' needs updating - please use bus_type methods
[ 1.671241] pata_sis 0000:00:02.5: version 0.5.2
[ 1.671435] scsi0 : pata_sis
[ 1.671530] scsi1 : pata_sis
[ 1.672368] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.672371] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.836473] ata1.00: ATA-7: HTS421280H9AT00, HA3OA70G, max UDMA/100
[ 1.836476] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.852479] ata1.00: configured for UDMA/100
[ 2.016402] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.00, max UDMA/33
[ 2.032397] ata2.00: configured for UDMA/33
[ 2.032855] scsi 0:0:0:0: Direct-Access ATA HTS421280H9AT00 HA3O PQ: 0 ANSI: 5
[ 2.032939] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.032954] sd 0:0:0:0: [sda] Write Protect is off
[ 2.032957] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.032978] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.033042] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.033054] sd 0:0:0:0: [sda] Write Protect is off
[ 2.033057] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.033077] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.033081] sda: sda1 sda2 sda3 sda4
[ 2.080563] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.080611] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.082444] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.00 PQ: 0 ANSI: 5
[ 2.086860] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.086864] Uniform CD-ROM driver Revision: 3.20
[ 2.086960] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.086997] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.087110] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.087136] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.087162] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 2.087224] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 2.087257] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
[ 2.087272] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfebfc000
[ 2.096010] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 2.096085] usb usb1: configuration #1 chosen from 1 choice
[ 2.096111] hub 1-0:1.0: USB hub found
[ 2.096121] hub 1-0:1.0: 8 ports detected
[ 2.096221] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.096239] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.096249] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 2.096286] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 2.096306] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfebff000
[ 2.154040] usb usb2: configuration #1 chosen from 1 choice
[ 2.154064] hub 2-0:1.0: USB hub found
[ 2.154074] hub 2-0:1.0: 3 ports detected
[ 2.154149] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.154159] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 2.154196] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 2.154212] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfebfe000
[ 2.210043] usb usb3: configuration #1 chosen from 1 choice
[ 2.210065] hub 3-0:1.0: USB hub found
[ 2.210075] hub 3-0:1.0: 3 ports detected
[ 2.210147] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.210157] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 2.210198] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 2.210214] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfebfd000
[ 2.266039] usb usb4: configuration #1 chosen from 1 choice
[ 2.266061] hub 4-0:1.0: USB hub found
[ 2.266070] hub 4-0:1.0: 2 ports detected
[ 2.266153] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.266235] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.268361] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.269530] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.269535] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.269538] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.269540] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.269543] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.269693] mice: PS/2 mouse device common for all mice
[ 2.269856] rtc_cmos 00:02: RTC can wake from S4
[ 2.269900] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.269920] rtc0: alarms up to one month, 114 bytes nvram
[ 2.269983] device-mapper: uevent: version 1.0.3
[ 2.270092] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.270150] device-mapper: multipath: version 1.0.5 loaded
[ 2.270153] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.270226] EISA: Probing bus 0 at eisa.0
[ 2.270234] Cannot allocate resource for EISA slot 1
[ 2.270259] EISA: Detected 0 cards.
[ 2.270322] cpuidle: using governor ladder
[ 2.270376] cpuidle: using governor menu
[ 2.270877] TCP cubic registered
[ 2.270972] NET: Registered protocol family 10
[ 2.271372] lo: Disabled Privacy Extensions
[ 2.271681] NET: Registered protocol family 17
[ 2.271697] Bluetooth: L2CAP ver 2.11
[ 2.271698] Bluetooth: L2CAP socket layer initialized
[ 2.271701] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.271703] Bluetooth: SCO socket layer initialized
[ 2.271724] Bluetooth: RFCOMM socket layer initialized
[ 2.271734] Bluetooth: RFCOMM TTY layer initialized
[ 2.271736] Bluetooth: RFCOMM ver 1.10
[ 2.271757] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-32 processors (1 cpu cores) (version 2.20.00)
[ 2.271808] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
[ 2.271811] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
[ 2.271813] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16
[ 2.271851] Using IPI No-Shortcut mode
[ 2.271937] registered taskstats version 1
[ 2.272068] Magic number: 13:330:383
[ 2.272079] usb usb1: hash matches
[ 2.272172] rtc_cmos 00:02: setting system clock to 2009-10-28 13:23:45 UTC (1256736225)
[ 2.272176] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.272178] EDD information not available.
[ 2.272627] Freeing unused kernel memory: 532k freed
[ 2.272764] Write protecting the kernel text: 4120k
[ 2.272810] Write protecting the kernel read-only data: 1524k
[ 2.310636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.408019] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 2.541776] usb 1-4: configuration #1 chosen from 1 choice
[ 2.731805] Marking TSC unstable due to TSC halts in idle
[ 2.845185] b43-pci-bridge 0000:00:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.920110] ssb: Sonics Silicon Backplane found on PCI device 0000:00:09.0
[ 2.920399] ohci1394 0000:00:0a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.973252] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[febf9800-febf9fff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.981979] usb 4-2: new full speed USB device using ohci_hcd and address 2
[ 3.028049] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.028078] r8169 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.028112] r8169 0000:00:0b.0: no PCI Express capability
[ 3.028715] eth0: RTL8169sb/8110sb at 0xe0812c00, 00:15:f2:e3:2d:e4, XID 10000000 IRQ 19
[ 3.283012] usb 4-2: configuration #1 chosen from 1 choice
[ 3.359006] PM: Starting manual resume from disk
[ 3.359010] PM: Resume from partition 8:3
[ 3.359012] PM: Checking hibernation image.
[ 3.359185] PM: Resume from disk failed.
[ 3.390969] kjournald starting. Commit interval 5 seconds
[ 3.390980] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.300147] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800034fbe0a]
[ 15.081461] udev: starting version 141
[ 15.464840] acpi device:05: registered as cooling_device2
[ 15.465046] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6
[ 15.492196] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.869619] parport_pc 00:08: reported by Plug and Play ACPI
[ 15.869646] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 15.925851] sdhci: Secure Digital Host Controller Interface driver
[ 15.925855] sdhci: Copyright(c) Pierre Ossman
[ 15.927623] sdhci-pci 0000:00:0a.2: SDHCI controller found [1180:0822] (rev 17)
[ 15.927638] sdhci-pci 0000:00:0a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 15.930751] mmc0: SDHCI controller on PCI [0000:00:0a.2] using PIO
[ 15.953047] Linux agpgart interface v0.103
[ 15.986951] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 15.987073] usbcore: registered new interface driver btusb
[ 15.989197] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 16.035813] Linux video capture interface: v2.00
[ 16.587507] ppdev: user-space parallel port driver
[ 16.606436] asus-laptop: Asus Laptop Support version 0.42
[ 16.609251] asus-laptop: A6Km model detected
[ 16.609941] asus-laptop: Brightness ignored, must be controlled by ACPI video driver
[ 16.610173] Registered led device: asus::mail
[ 16.634936] cfg80211: Calling CRDA to update world regulatory domain
[ 16.764145] cfg80211: World regulatory domain updated:
[ 16.764150] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.764154] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.764157] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.764159] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.764162] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.764165] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.778109] stkwebcam: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 16.778133] usbcore: registered new interface driver stkwebcam
[ 16.832561] yenta_cardbus 0000:00:0a.0: CardBus bridge found [1043:1107]
[ 16.846310] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 16.960946] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0c38, PCI irq 17
[ 16.960950] yenta_cardbus 0000:00:0a.0: Socket status: 30000006
[ 17.454379] nvidia: module license 'NVIDIA' taints kernel.
[ 17.717253] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.717263] nvidia 0000:01:00.0: setting latency timer to 64
[ 17.718766] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 17.895525] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 17.945444] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 17.990497] b43-phy0: Broadcom 4318 WLAN found
[ 18.058644] phy0: Selected rate control algorithm 'pid'
[ 18.099106] usbcore: registered new interface driver snd-usb-audio
[ 18.229851] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 18.247662] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 18.287527] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 18.289213] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 18.289894] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.289938] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.290695] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 19.056027] intel8x0_measure_ac97_clock: measured 55472 usecs
[ 19.056031] intel8x0: clocking to 48000
[ 19.198200] lp0: using parport0 (interrupt-driven).
[ 19.371771] Adding 996020k swap on /dev/sda3. Priority:-1 extents:1 across:996020k
[ 19.909926] EXT3 FS on sda4, internal journal
[ 21.604762] type=1505 audit(1256732644.831:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2120
[ 21.665749] type=1505 audit(1256732644.891:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2124
[ 21.665938] type=1505 audit(1256732644.891:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2124
[ 21.666006] type=1505 audit(1256732644.891:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2124
[ 21.666068] type=1505 audit(1256732644.891:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2124
[ 21.840987] type=1505 audit(1256732645.067:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2129
[ 21.841248] type=1505 audit(1256732645.067:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2129
[ 21.874764] type=1505 audit(1256732645.099:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2133
[ 27.588047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.588051] Bluetooth: BNEP filters: protocol multicast
[ 27.614448] Bridge firewalling registered
[ 33.774856] r8169: eth0: link down
[ 33.774927] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.867019] input: b43-phy0 as /devices/virtual/input/input9
[ 33.920045] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 35.068116] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 35.076392] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 35.159355] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 35.320042] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 35.360680] Registered led device: b43-phy0::tx
[ 35.360700] Registered led device: b43-phy0::rx
[ 35.360715] Registered led device: b43-phy0::assoc
[ 35.360732] Registered led device: b43-phy0::radio
[ 36.644208] b43-phy0: Radio turned on by software
[ 36.644551] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.192197] wlan0: direct probe to AP 00:14:c1:2b:eb:69 try 1
[ 38.392031] wlan0: direct probe to AP 00:14:c1:2b:eb:69 try 2
[ 38.592028] wlan0: direct probe to AP 00:14:c1:2b:eb:69 try 3
[ 38.792035] wlan0: direct probe to AP 00:14:c1:2b:eb:69 timed out
[ 75.857960] APIC error on CPU0: 00(40)
[ 78.996534] wlan0: direct probe to AP 00:14:c1:2b:eb:69 try 1
[ 79.004588] wlan0: direct probe to AP 00:14:c1:2b:eb:69 try 1
[ 79.204039] wlan0: direct probe to AP 00:14:c1:2b:eb:69 try 2
[ 79.404037] wlan0: direct probe to AP 00:14:c1:2b:eb:69 try 3
[ 79.604027] wlan0: direct probe to AP 00:14:c1:2b:eb:69 timed out
[ 90.504477] wlan0: authenticate with AP 00:14:c1:2b:eb:69
[ 90.512115] wlan0: authenticate with AP 00:14:c1:2b:eb:69
[ 90.513622] wlan0: authenticated
[ 90.513625] wlan0: associate with AP 00:14:c1:2b:eb:69
[ 90.524613] wlan0: RX AssocResp from 00:14:c1:2b:eb:69 (capab=0x421 status=0 aid=35)
[ 90.524616] wlan0: associated
[ 90.527297] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 93.076048] Clocksource tsc unstable (delta = -163418736 ns)
[ 100.780023] wlan0: no IPv6 routers present
[ 110.304046] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 110.556071] usb 2-1: configuration #1 chosen from 1 choice
[ 110.616946] usbcore: registered new interface driver hiddev
[ 110.622847] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input10
[ 110.623711] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.0-1/input0
[ 110.623749] usbcore: registered new interface driver usbhid
[ 110.623757] usbhid: v2.6:USB HID core driver
[ 150.558429] wlan0 direct probe responded
[ 150.558441] wlan0: authenticate with AP 00:14:c1:2b:eb:69
[ 150.560838] wlan0: authenticated
[ 150.560846] wlan0: associate with AP 00:14:c1:2b:eb:69
[ 150.569994] wlan0: RX ReassocResp from 00:14:c1:2b:eb:69 (capab=0x421 status=0 aid=35)
[ 150.570000] wlan0: associated
[ 191.658693] APIC error on CPU0: 40(40)
[ 193.350511] APIC error on CPU0: 40(40)
[ 205.545825] APIC error on CPU0: 40(40)