Partizioni "incasinate"
Inviato: venerdì 26 marzo 2010, 15:58
spiego il titolo "aberrante"...
allora io in teoria sul mio disco dovrei avere quattro installazioni di linux se infatti faccio vedere:
ecco come si presenta il mio disco, per cui dovrei avere installati ubuntu 9.04, ubuntu 8.10, fedora 10 e kubuntu 9.10
il problema è che allavvio mi fa vedere solo tra le opzioni di scelta ubuntu 9.04 e ubuntu 8.10, e delle altre nemmeno l'ombra...come posso fare in modo da accedere anche alle altre distro? vi posto anche il mio grub
grazie in anticipo per eventuali aiuti postandovi anche uno screenshot di gparted

allora io in teoria sul mio disco dovrei avere quattro installazioni di linux se infatti faccio vedere:
Codice: Seleziona tutto
deepcosco@deepcosco-desktop:~$ sudo fdisk -l
[sudo] password for deepcosco:
Disco /dev/sda: 160.0 GB, 160041885696 byte
255 testine, 63 settori/tracce, 19457 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0x3dff3dfe
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 5128 41190628+ 83 Linux
/dev/sda2 5129 19457 115097692+ 5 Esteso
/dev/sda5 18708 19457 6024343+ 82 Linux swap / Solaris
/dev/sda6 9976 12525 20480000 83 Linux
/dev/sda7 18346 18707 2907733+ 82 Linux swap / Solaris
/dev/sda8 12526 12550 200781 83 Linux
/dev/sda9 12551 18345 46548306 8e Linux LVM
/dev/sda10 5129 9770 37286802 83 Linux
/dev/sda11 9771 9975 1646631 82 Linux swap / Solaris
Le voci nella tabella delle partizioni non sono nello stesso ordine del disco
deepcosco@deepcosco-desktop:~$
il problema è che allavvio mi fa vedere solo tra le opzioni di scelta ubuntu 9.04 e ubuntu 8.10, e delle altre nemmeno l'ombra...come posso fare in modo da accedere anche alle altre distro? vi posto anche il mio grub
Codice: Seleziona tutto
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=9aa58b27-52f3-4a7c-8ee8-d4ba531db957
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-18-generic
uuid 9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel /boot/vmlinuz-2.6.28-18-generic root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro quiet splash
initrd /boot/initrd.img-2.6.28-18-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-18-generic (recovery mode)
uuid 9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel /boot/vmlinuz-2.6.28-18-generic root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro single
initrd /boot/initrd.img-2.6.28-18-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=9aa58b27-52f3-4a7c-8ee8-d4ba531db957 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 9aa58b27-52f3-4a7c-8ee8-d4ba531db957
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, kernel 2.6.27-17-generic (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-17-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash
initrd /boot/initrd.img-2.6.27-17-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, kernel 2.6.27-17-generic (recovery mode) (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-17-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single
initrd /boot/initrd.img-2.6.27-17-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, kernel 2.6.27-16-generic (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-16-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash
initrd /boot/initrd.img-2.6.27-16-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, kernel 2.6.27-16-generic (recovery mode) (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-16-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single
initrd /boot/initrd.img-2.6.27-16-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, kernel 2.6.27-15-generic (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-15-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash
initrd /boot/initrd.img-2.6.27-15-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, kernel 2.6.27-15-generic (recovery mode) (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-15-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single
initrd /boot/initrd.img-2.6.27-15-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, kernel 2.6.27-7-generic (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro splash
initrd /boot/initrd.img-2.6.27-7-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode) (on /dev/sda1)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=70e334f1-325e-439d-bebb-d4906b360c24 ro single
initrd /boot/initrd.img-2.6.27-7-generic
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title Ubuntu 8.10, memtest86+ (on /dev/sda1)
root (hd0,0)
kernel /boot/memtest86+.bin
savedefault
boot