vorrei far partire vista prima di ubuntu
è possibile??
ho provato set up manger
ma non fuziona mi ha messo vista nella posizone esatta nel grub.conf
ma parte sempre prima ubuntu
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=6
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entrys
#GRUB_DISABLE_LINUX_RECOVERY="true"
qualcuno mi da una mano?
grazie
Ultima modifica di Anonymous il martedì 6 aprile 2010, 0:14, modificato 1 volta in totale.
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-20-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
linux /boot/vmlinuz-2.6.31-20-generic root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro quiet splash
initrd /boot/initrd.img-2.6.31-20-generic
}
menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
linux /boot/vmlinuz-2.6.31-20-generic root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro single
initrd /boot/initrd.img-2.6.31-20-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 608a24748a24493c
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
Diabolik62 ha scritto:
dev sda1 non si sposta da li ::)
un momento, non facciamo confusione.
il default non sposta la posizione della riga con windows ma mette come predefinito il settimo, ovvero gia` evidenziato.
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=15a63a97-ca2a-4caf-a88d-7d72b8bb101f
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.10, kernel 2.6.31-20-generic
uuid 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro quiet splash
initrd /boot/initrd.img-2.6.31-20-generic
title Ubuntu 9.10, kernel 2.6.31-20-generic (recovery mode)
uuid 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro single
initrd /boot/initrd.img-2.6.31-20-generic
title Ubuntu 9.10, kernel 2.6.31-14-generic
uuid 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode)
uuid 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=15a63a97-ca2a-4caf-a88d-7d72b8bb101f ro single
initrd /boot/initrd.img-2.6.31-14-generic
title Chainload into GRUB 2
root 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
kernel /boot/grub/core.img
title Ubuntu 9.10, memtest86+
uuid 15a63a97-ca2a-4caf-a88d-7d72b8bb101f
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST