Pagina 1 di 1

f-spot

Inviato: mercoledì 21 aprile 2010, 23:34
da fedemodena
ciao a tutti!
...sono qui per chiedervi (nuovamente) aiuto...
...la mia macchina fotografica digitale non viene riconosciuta in automatico da ubuntu...
...e ho provato a usare F-spot, ma il programma proprio non parte...
...cavoli...che devo fare...?!?!?!
se lo faccio partire da terminale la schermata che mi da è la seguente:

fede@fede-ubuntu:~$ f-spot
Starting new FSpot server
XXXXX
Mono.Data.SqliteClient.SqliteSyntaxException: no such table: tags
  at Mono.Data.SqliteClient.SqliteCommand.GetNextStatement (IntPtr pzStart, System.IntPtr& pzTail, System.IntPtr& pStmt) [0x00000]
  at Mono.Data.SqliteClient.SqliteCommand.ExecuteReader (CommandBehavior behavior, Boolean want_results, System.Int32& rows_affected) [0x00000]
  at Mono.Data.SqliteClient.SqliteCommand.ExecuteReader (CommandBehavior behavior) [0x00000]
  at Mono.Data.SqliteClient.SqliteCommand.ExecuteReader () [0x00000]
  at (wrapper remoting-invoke-with-check) Mono.Data.SqliteClient.SqliteCommand:ExecuteReader ()
  at Banshee.Database.QueuedSqliteCommand.Execute () [0x00000]
XXXXX
Can't get a connection to the dbus. Trying again...
Starting new FSpot server
Can't get a connection to the dbus. Trying again...
Starting new FSpot server
Can't get a connection to the dbus. Trying again...
Starting new FSpot server
Can't get a connection to the dbus. Trying again...
Starting new FSpot server
Can't get a connection to the dbus. Trying again...
Starting new FSpot server
Can't get a connection to the dbus. Trying again...
Sorry, couldn't start F-Spot

....
...che devo fare? :(
.....parlatemi come se fossi una bimba di 3 anni....grazie!!!!!!!!!!!!!

Re: f-spot

Inviato: giovedì 22 aprile 2010, 20:37
da Hackuity
Domanda stupida...non hai la possibilità di staccare la schedina di memoria e farla leggere direttamente al PC?
Altra domanda...cosa intendi dire con non viene riconosciuta in automatico? Il file manager non fa comparire l'iconcina?

Re: f-spot

Inviato: venerdì 23 aprile 2010, 21:21
da fedemodena
purtroppo non ho la possibilità di inserire la schedina....
....con quella frase intendevo che quando collego la macchina al pc (è una reflex), mi si apre l'icona che mi dice "vuoi scaricare le foto"....solo che dopo non succede assolutamente nulla.....anche in risorse del sistema non c'è nulla....non compare da nessuna parte....
....che faccio?
:-\

Re: f-spot

Inviato: venerdì 23 aprile 2010, 21:28
da sr82
Ciao...

prova a postare l'output del comando

Codice: Seleziona tutto

dmesg
subito dopo aver collegato la macchina fotografica.
l'output potrebbe essere molto lungo..ma se lo lanci subito aver collegato la macchina la parte finale dei messaggi sono quelli che ci interessano, dovresti riuscire a individuarli.

In questo modo proviamo a vedere se ha problemi in fase di inizializzazione del dispositivo

Re: f-spot

Inviato: venerdì 23 aprile 2010, 22:52
da fedemodena
...non so se ho fatto la cosa fatta bene....
...ora come ora non mi dice proprio più niente quando collego la macchina....
....lanciando pochissimo dopo il comando da terminale dopo l'accensione della macchina, mi compare questo:

[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[    0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129763
[    0.000000] Kernel command line: root=UUID=b72729eb-8c81-4c61-abb5-7c36b1156318 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1729.198 MHz processor.
[  10.670543] Console: colour VGA+ 80x25
[  10.670547] console [tty0] enabled
[  10.670718] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[  10.670922] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[  10.681691] Memory: 506236k/523136k available (2182k kernel code, 16348k reserved, 1005k data, 368k init, 0k highmem)
[  10.681699] virtual kernel memory layout:
[  10.681700]    fixmap  : 0xfff4b000 - 0xfffff000  ( 720 kB)
[  10.681701]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)
[  10.681703]    vmalloc : 0xe0800000 - 0xff7fe000  ( 495 MB)
[  10.681704]    lowmem  : 0xc0000000 - 0xdfee0000  ( 510 MB)
[  10.681705]      .init : 0xc0423000 - 0xc047f000  ( 368 kB)
[  10.681706]      .data : 0xc03218ca - 0xc041cdc4  (1005 kB)
[  10.681708]      .text : 0xc0100000 - 0xc03218ca  (2182 kB)
[  10.681711] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[  10.681749] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[  10.681791] Calibrating delay loop (skipped), using tsc calculated value.. 3458.39 BogoMIPS (lpj=6916792)
[  10.681817] Security Framework initialized
[  10.681824] SELinux:  Disabled at boot.
[  10.681839] AppArmor: AppArmor initialized
[  10.681843] Failure registering capabilities with primary security module.
[  10.681852] Mount-cache hash table entries: 512
[  10.681972] Initializing cgroup subsys ns
[  10.681978] Initializing cgroup subsys cpuacct
[  10.681988] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[  10.681999] CPU: L1 I cache: 32K, L1 D cache: 32K
[  10.682001] CPU: L2 cache: 2048K
[  10.682005] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000
[  10.682014] Compat vDSO mapped to ffffe000.
[  10.682025] Checking 'hlt' instruction... OK.
[  10.698136] SMP alternatives: switching to UP code
[  10.699940] Freeing SMP alternatives: 11k freed
[  10.700046] Early unpacking initramfs... done
[  11.069696] ACPI: Core revision 20070126
[  11.069753] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[  11.079431] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[  11.079451] Total of 1 processors activated (3458.39 BogoMIPS).
[  11.079641] ENABLING IO-APIC IRQs
[  11.079832] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[  11.225681] Brought up 1 CPUs
[  11.225709] CPU0 attaching sched-domain:
[  11.225712]  domain 0: span 01
[  11.225714]  groups: 01
[  11.225880] net_namespace: 64 bytes
[  11.225889] Booting paravirtualized kernel on bare hardware
[  11.226341] Time: 21:16:26  Date: 04/23/10
[  11.226365] NET: Registered protocol family 16
[  11.226549] EISA bus registered
[  11.226577] ACPI: bus type pci registered
[  11.227047] PCI: PCI BIOS revision 2.10 entry at 0xfd91f, last bus=8
[  11.227050] PCI: Using configuration type 1
[  11.227064] Setting up standard PCI resources
[  11.235575] ACPI: EC: Look up EC in DSDT
[  11.239091] ACPI: Interpreter enabled
[  11.239094] ACPI: (supports S0 S3 S4 S5)
[  11.239107] ACPI: Using IOAPIC for interrupt routing
[  11.239509] ACPI: EC: non-query interrupt received, switching to interrupt mode
[  11.346946] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[  11.346949] ACPI: EC: driver started in interrupt mode
[  11.346985] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  11.347578] Force enabled HPET at base address 0xfed00000
[  11.347583] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[  11.347588] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[  11.348416] PCI: Transparent bridge - 0000:00:1e.0
[  11.348495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  11.348802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[  11.348938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[  11.353182] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[  11.353270] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[  11.353355] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[  11.353439] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[  11.353523] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[  11.353620] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[  11.353708] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[  11.353793] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[  11.353902] Linux Plug and Play Support v0.97 (c) Adam Belay
[  11.353930] pnp: PnP ACPI init
[  11.353937] ACPI: bus type pnp registered
[  11.356185] pnp: PnP ACPI: found 8 devices
[  11.356187] ACPI: ACPI bus type pnp unregistered
[  11.356191] PnPBIOS: Disabled by ACPI PNP
[  11.356390] PCI: Using ACPI for IRQ routing
[  11.356393] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  11.389604] NET: Registered protocol family 8
[  11.389607] NET: Registered protocol family 20
[  11.389761] hpet clockevent registered
[  11.389768] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[  11.389771] hpet0: 3 64-bit timers, 14318180 Hz
[  11.390805] AppArmor: AppArmor Filesystem Enabled
[  11.393597] Time: tsc clocksource has been installed.
[  11.401629] system 00:04: ioport range 0x380-0x383 has been reserved
[  11.401632] system 00:04: ioport range 0x800-0x80f has been reserved
[  11.401635] system 00:04: ioport range 0x1000-0x107f has been reserved
[  11.401638] system 00:04: ioport range 0x1180-0x11bf has been reserved
[  11.401640] system 00:04: ioport range 0x1640-0x164f has been reserved
[  11.401644] system 00:04: iomem range 0xf0008000-0xf000bfff could not be reserved
[  11.401647] system 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved
[  11.401650] system 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved
[  11.401653] system 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved
[  11.401656] system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
[  11.432027] PCI: Bridge: 0000:00:01.0
[  11.432029]  IO window: disabled.
[  11.432032]  MEM window: 90000000-afffffff
[  11.432035]  PREFETCH window: c0000000-cfffffff
[  11.432046] PCI: Bus 7, cardbus bridge: 0000:06:03.0
[  11.432048]  IO window: 00002400-000024ff
[  11.432054]  IO window: 00002800-000028ff
[  11.432060]  PREFETCH window: 30000000-33ffffff
[  11.432066]  MEM window: 34000000-37ffffff
[  11.432072] PCI: Bridge: 0000:00:1e.0
[  11.432075]  IO window: 2000-2fff
[  11.432080]  MEM window: b0000000-b00fffff
[  11.432085]  PREFETCH window: disabled.
[  11.432101] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[  11.432105] PCI: Setting latency timer of device 0000:00:01.0 to 64
[  11.432118] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  11.432138] PCI: Enabling device 0000:06:03.0 (0000 -> 0003)
[  11.432142] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[  11.432158] NET: Registered protocol family 2
[  11.469632] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[  11.469815] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[  11.469907] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[  11.469998] TCP: Hash tables configured (established 16384 bind 16384)
[  11.470001] TCP reno registered
[  11.481682] checking if image is initramfs... it is
[  11.893474] Switched to high resolution mode on CPU 0
[  12.201649] Freeing initrd memory: 7701k freed
[  12.201872] Simple Boot Flag at 0x36 set to 0x1
[  12.202280] audit: initializing netlink socket (disabled)
[  12.202298] audit(1272057386.412:1): initialized
[  12.204275] VFS: Disk quotas dquot_6.5.1
[  12.204359] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  12.204502] io scheduler noop registered
[  12.204504] io scheduler anticipatory registered
[  12.204506] io scheduler deadline registered
[  12.204518] io scheduler cfq registered (default)
[  12.204627] Boot video device is 0000:01:00.0
[  12.204638] PCI: Firmware left 0000:06:08.0 e100 interrupts enabled, disabling
[  12.204742] PCI: Setting latency timer of device 0000:00:01.0 to 64
[  12.204771] assign_interrupt_mode Found MSI capability
[  12.204797] Allocate Port Service[0000:00:01.0:pcie00]
[  12.205018] isapnp: Scanning for PnP cards...
[  12.559761] isapnp: No Plug & Play device found
[  12.585863] Real Time Clock Driver v1.12ac
[  12.585973] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  12.587103] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  12.587175] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[  12.587264] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[  12.590326] i8042.c: Detected active multiplexing controller, rev 1.1.
[  12.595371] serio: i8042 KBD port at 0x60,0x64 irq 1
[  12.595376] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[  12.595378] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[  12.595381] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[  12.595383] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[  12.605215] mice: PS/2 mouse device common for all mice
[  12.605322] EISA: Probing bus 0 at eisa.0
[  12.605330] Cannot allocate resource for EISA slot 1
[  12.605333] Cannot allocate resource for EISA slot 2
[  12.605362] EISA: Detected 0 cards.
[  12.605366] cpuidle: using governor ladder
[  12.605368] cpuidle: using governor menu
[  12.605459] NET: Registered protocol family 1
[  12.605486] Using IPI No-Shortcut mode
[  12.605519] registered taskstats version 1
[  12.605617]  Magic number: 6:663:298
[  12.605630]  hash matches device ttywf
[  12.605712] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[  12.605714] EDD information not available.
[  12.605907] Freeing unused kernel memory: 368k freed
[  12.605934] Write protecting the kernel read-only data: 803k
[  12.854161] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[  13.801401] fuse init (API version 7.9)
[  13.818890] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[  13.818896] ACPI: Processor [CPU0] (supports 8 throttling states)
[  13.818909] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[  13.820858] ACPI: Thermal Zone [THRM] (36 C)
[  14.356582] usbcore: registered new interface driver usbfs
[  14.356608] usbcore: registered new interface driver hub
[  14.364542] usbcore: registered new device driver usb
[  14.376524] USB Universal Host Controller Interface driver v3.0
[  14.376587] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[  14.376598] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[  14.376603] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[  14.376937] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[  14.376969] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
[  14.377096] usb usb1: configuration #1 chosen from 1 choice
[  14.377119] hub 1-0:1.0: USB hub found
[  14.377125] hub 1-0:1.0: 2 ports detected
[  14.440940] SCSI subsystem initialized
[  14.480578] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 18
[  14.480592] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[  14.480597] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[  14.480620] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[  14.480651] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001820
[  14.480762] usb usb2: configuration #1 chosen from 1 choice
[  14.480785] hub 2-0:1.0: USB hub found
[  14.480790] hub 2-0:1.0: 2 ports detected
[  14.500466] libata version 3.00 loaded.
[  14.532473] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[  14.532477] e100: Copyright(c) 1999-2006 Intel Corporation
[  14.584548] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[  14.584561] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[  14.584566] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[  14.584589] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[  14.584621] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001840
[  14.584728] usb usb3: configuration #1 chosen from 1 choice
[  14.584750] hub 3-0:1.0: USB hub found
[  14.584755] hub 3-0:1.0: 2 ports detected
[  14.688501] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[  14.688514] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[  14.688519] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[  14.688541] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[  14.688574] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[  14.688681] usb usb4: configuration #1 chosen from 1 choice
[  14.688705] hub 4-0:1.0: USB hub found
[  14.688711] hub 4-0:1.0: 2 ports detected
[  14.792596] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[  14.792612] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[  14.792616] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[  14.792641] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[  14.796556] ehci_hcd 0000:00:1d.7: debug port 1
[  14.796563] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[  14.796570] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x80004000
[  14.812353] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[  14.812459] usb usb5: configuration #1 chosen from 1 choice
[  14.812483] hub 5-0:1.0: USB hub found
[  14.812490] hub 5-0:1.0: 8 ports detected
[  14.916545] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[  14.949599] e100: eth0: e100_probe: addr 0xb0007000, irq 20, MAC addr 00:01:4a:c5:fa:26
[  14.949621] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[  14.949653] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[  14.949666] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[  14.951605] ACPI: PCI Interrupt 0000:06:03.2[C] -> GSI 18 (level, low) -> IRQ 19
[  15.001332] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[b0004000-b00047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[  15.007782] ata_piix 0000:00:1f.1: version 2.12
[  15.007798] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[  15.007831] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[  15.008504] scsi0 : ata_piix
[  15.008738] scsi1 : ata_piix
[  15.009280] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[  15.009283] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[  15.336861] ata1.00: ATA-7: HTS421280H9AT00, HA3OA70G, max UDMA/100
[  15.336865] ata1.00: 156301488 sectors, multi 16: LBA48
[  15.336889] ata1.01: ATAPI: MATSHITAUJ-840D, 1.01, max UDMA/33
[  15.352782] ata1.00: configured for UDMA/100
[  15.388137] Clocksource tsc unstable (delta = -10359956110 ns)
[  15.404129] Time: hpet clocksource has been installed.
[  15.524611] ata1.01: configured for UDMA/33
[  15.524656] ata2: port disabled. ignoring.
[  15.524789] scsi 0:0:0:0: Direct-Access    ATA      HTS421280H9AT00  HA3O PQ: 0 ANSI: 5
[  15.526869] scsi 0:0:1:0: CD-ROM            MATSHITA UJ-840D          1.01 PQ: 0 ANSI: 5
[  15.535270] Driver 'sd' needs updating - please use bus_type methods
[  15.535339] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[  15.535351] sd 0:0:0:0: [sda] Write Protect is off
[  15.535354] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  15.535369] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  15.535414] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[  15.535423] sd 0:0:0:0: [sda] Write Protect is off
[  15.535425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  15.535440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  15.535444]  sda:Driver 'sr' needs updating - please use bus_type methods
[  15.558767]  sda1 sda2 sda3
[  15.650385] sd 0:0:0:0: [sda] Attached SCSI disk
[  15.655937] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  15.655955] sr 0:0:1:0: Attached scsi generic sg1 type 5
[  15.661704] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[  15.661708] Uniform CD-ROM driver Revision: 3.20
[  15.661749] sr 0:0:1:0: Attached scsi CD-ROM sr0
[  16.031657] Attempting manual resume
[  16.031660] swsusp: Resume From Partition 8:7
[  16.031662] PM: Checking swsusp image.
[  16.031832] PM: Resume from disk failed.
[  16.082513] kjournald starting.  Commit interval 5 seconds
[  16.082522] EXT3-fs: mounted filesystem with ordered data mode.
[  16.275933] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460301f3ba70]
[  20.541723] Linux agpgart interface v0.102
[  20.681725] iTCO_vendor_support: vendor-support=0
[  20.713586] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[  20.713658] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[  20.713668] iTCO_wdt: No card detected
[  20.757643] input: PC Speaker as /devices/platform/pcspkr/input/input2
[  20.849563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  21.109540] input: Power Button (FF) as /devices/virtual/input/input3
[  21.137441] ACPI: Power Button (FF) [PWRF]
[  21.137499] input: Lid Switch as /devices/virtual/input/input4
[  21.154605] ACPI: Lid Switch [LID0]
[  21.154657] input: Power Button (CM) as /devices/virtual/input/input5
[  21.185432] ACPI: Power Button (CM) [PWRB]
[  21.186815] ACPI: AC Adapter [ADP1] (on-line)
[  21.237126] ACPI: Battery Slot [BAT0] (battery present)
[  21.333355] intel_rng: FWH not detected
[  21.369936] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  21.499136] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
[  21.529296] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[  21.529763] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input7
[  21.561281] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[  22.215225] sony-laptop: Sony Notebook Control Driver v0.5.
[  22.233081] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/SNY5001:00/input/input8
[  22.261154] input: Sony Vaio Jogdial as /devices/virtual/input/input9
[  22.794247] Yenta: CardBus bridge found at 0000:06:03.0 [104d:818f]
[  22.794275] Yenta: Enabling burst memory read transactions
[  22.794281] Yenta: Using CSCINT to route CSC interrupts to PCI
[  22.794283] Yenta: Routing CardBus interrupts to PCI
[  22.794290] Yenta TI: socket 0000:06:03.0, mfunc 0x01001b22, devctl 0x64
[  22.856562] ieee80211_crypt: registered algorithm 'NULL'
[  22.860594] ieee80211: 802.11 data/management/control stack, git-1.1.13
[  22.860598] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[  23.029516] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[  23.029522] Socket status: 30000006
[  23.029525] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[  23.029530] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[  23.029533] cs: IO port probe 0x2000-0x2fff: clean.
[  23.029753] pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb00fffff
[  23.031395] ACPI: PCI Interrupt 0000:06:03.3 -> GSI 17 (level, low) -> IRQ 21
[  23.052694] tifm_core: MMC/SD card detected in socket 0:0
[  23.054236] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[  23.054238] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[  23.054339] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 22 (level, low) -> IRQ 22
[  23.105080] nvidia: module license 'NVIDIA' taints kernel.
[  23.111606] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[  23.575615] input: PS/2 Mouse as /devices/virtual/input/input10
[  23.624774] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input11
[  24.679147] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[  24.679202] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  24.679212] PCI: Setting latency timer of device 0000:01:00.0 to 64
[  24.679332] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[  24.680142] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[  24.680171] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  24.842068] cs: IO port probe 0x100-0x3af: clean.
[  24.844385] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[  24.845366] cs: IO port probe 0x820-0x8ff: clean.
[  24.846184] cs: IO port probe 0xc00-0xcf7: clean.
[  24.847169] cs: IO port probe 0xa00-0xaff: clean.
[  24.902231] lp: driver loaded but no devices found
[  25.068553] Adding 1413680k swap on /dev/sda7.  Priority:-1 extents:1 across:1413680k
[  25.130502] EXT3 FS on sda6, internal journal
[  25.172381] device-mapper: uevent: version 1.0.3
[  25.172410] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[  25.534659] ip_tables: (C) 2000-2006 Netfilter Core Team
[  25.774653] No dock devices found.
[  26.323900] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[  26.323905] apm: overridden by ACPI.
[  26.351127] ppdev: user-space parallel port driver
[  26.368687] audit(1272050225.657:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5026 profile="/usr/sbin/cupsd" namespace="default"
[  26.394193] sonypi: Sony Programmable I/O Controller Driver v1.26.
[  26.394462] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/inde ... ny_drivers
[  26.394718] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[  26.394723] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[  26.394725] sonypi: device allocated minor is 62
[  26.395158] input: Sony Vaio Jogdial as /devices/platform/sonypi/input/input12
[  26.422487] input: Sony Vaio Keys as /devices/platform/sonypi/input/input13
[  26.512289] sonypi command failed at /build/buildd/linux-2.6.24/drivers/char/sonypi.c : sonypi_call1 (line 652)
[  26.559918] sonypi command failed at /build/buildd/linux-2.6.24/drivers/char/sonypi.c : sonypi_call2 (line 663)
[  26.607596] sonypi command failed at /build/buildd/linux-2.6.24/drivers/char/sonypi.c : sonypi_call2 (line 665)
[  26.655342] sonypi command failed at /build/buildd/linux-2.6.24/drivers/char/sonypi.c : sonypi_call1 (line 652)
[  58.020631] Marking TSC unstable due to: cpufreq changes.
[  58.447177] NET: Registered protocol family 10
[  58.447946] lo: Disabled Privacy Extensions
[  59.351524] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  59.532723] Bluetooth: Core ver 2.11
[  59.533470] NET: Registered protocol family 31
[  59.533477] Bluetooth: HCI device and connection manager initialized
[  59.533484] Bluetooth: HCI socket layer initialized
[  59.600920] Bluetooth: L2CAP ver 2.9
[  59.600927] Bluetooth: L2CAP socket layer initialized
[  27.554191] Bluetooth: RFCOMM socket layer initialized
[  27.554204] Bluetooth: RFCOMM TTY layer initialized
[  27.554206] Bluetooth: RFCOMM ver 1.8
[  36.620222] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  79.406233] NET: Registered protocol family 17
[  79.985980] ieee80211_crypt: registered algorithm 'TKIP'
[  57.679813] eth1: no IPv6 routers present
[  471.021975] usb 5-5: new high speed USB device using ehci_hcd and address 2
[  471.078519] usb 5-5: configuration #1 chosen from 1 choice
[  471.467716] usbcore: registered new interface driver libusual
[  217.623105] Initializing USB Mass Storage driver...
[  217.624226] scsi2 : SCSI emulation for USB Mass Storage devices
[  217.625098] usbcore: registered new interface driver usb-storage
[  217.625103] USB Mass Storage support registered.
[  217.625409] usb-storage: device found at 2
[  217.625411] usb-storage: waiting for device to settle before scanning
[  472.835674] usb-storage: device scan complete
[  472.836293] scsi 2:0:0:0: Direct-Access    Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[  472.852496] sd 2:0:0:0: [sdb] 3905407 512-byte hardware sectors (2000 MB)
[  472.853122] sd 2:0:0:0: [sdb] Write Protect is off
[  472.853130] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[  472.853135] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  218.184821] sd 2:0:0:0: [sdb] 3905407 512-byte hardware sectors (2000 MB)
[  218.185451] sd 2:0:0:0: [sdb] Write Protect is off
[  218.185454] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[  218.185457] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  218.185461]  sdb: sdb1
[  218.213097] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  218.213140] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2684.098211] usb 5-1: new high speed USB device using ehci_hcd and address 3
[ 2684.139600] usb 5-1: configuration #1 chosen from 1 choice
[ 2701.007473] usb 5-5: USB disconnect, address 2
[ 2702.402328] usb 5-1: USB disconnect, address 3
[ 2706.270891] usb 5-1: new high speed USB device using ehci_hcd and address 4
[ 2706.314491] usb 5-1: configuration #1 chosen from 1 choice
fede@fede-ubuntu:~$

....sono riuscita a postare qualcosa di utile o devo fare qualcosa di diverso rispetto a quello che ho fatto?
::)