volevo risolverla senza interpellarvi, ma a quanto pare nn ci sono riuscito..
ho un problema..ho cambiato la scheda video ed ho messo una radeon x1300 512mb, prima avevo una nvidia, quindi chiaramente al primo avvio neanche si avviava.. ho fatto un cd di sgd e si è avviato, mi ha chiesto di riconfigurare la scheda video.. ma nn la configura.. posso solo mettere usa impostazioni low-graphic.. allora una volta entrato ho disinstallato tutte le cose nvidia, ed ho seguito la guida http://wiki.ubuntu-it.org/Hardware/Video/Ati/Radeon fino ad installazione. ho riavviato, questa volta si accendeva senza sgd.. però sempre in low-graphic.. allora decido di configurare x.org... come dice il resto della guida..riavvio e quando sembra che sta per andare.. niente non va, ovvero fa una schermata dello splash di ubuntu che carica e poi schermo nero... allora vado in modalità recovery rinomino il file xorg.conf con un backup precedente...
riavvio ma niente.. si blocca durante dei controlli in avvio e rimane fisso..
allora rimetto sgd.. mi si avvia con low-*
ed eccomi qua a scrivere sul forum....
sto impazzend.. che faccio ???
l'x.org modificato che ha causato il blocco totale, fatto grazie alla guida è questo:
Codice: Seleziona tutto
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "ati"
# Option "NoLogo" "True"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerFlags"
Option "AIGLX" "True"
EndSection
Codice: Seleziona tutto
sudo dpkg-reconfigure -phigh xserver-xorg
invece l'x.org prima della guida è così:
Codice: Seleziona tutto
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
poi grazie ad un suggerimento di Alka-Seltzer PLUS ho eseguito:
Codice: Seleziona tutto
sudo X -configure
sudo cp xorg.conf.new /etc/X11/xorg.confCodice: Seleziona tutto
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "glx"
Load "dri"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 340 270 # mm
Identifier "Monitor0"
VendorName "PHL"
ModelName "Philips 170S"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV515 [Radeon X1300]"
BusID "PCI:4:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionallora mi viene la folle idea di far partire un kernel vecchio, ovvero la *-.19,,, io avvio sempre la 21 finale...
con la 19 parte... allora provo anche con la 20... ma niente di nuovo schermata nera.. e poi riprovo con la 19.. niente schermata nera uguale.. allora tento la 18.. uguale schermata nera.. così reinfilo sgd.. e riparte.. il fatto è che che con sgd parte tutto bene.. attiva anche il 3d e tutti gli effetti compiz che ho.. quindi nn so proprio che pesci pigliare...
non vorrei rimanere a vita con il cd sgd...
spero che mi possiate aiutare...!
grazie
