Pagina 1 di 1

Installare Xsane

Inviato: lunedì 10 maggio 2010, 10:57
da Albertino
Effettuata la procedura di installazione di Lucid, ho pensato di installare nuovamente il mio Scanner Mustek CP 1200 che su karmic funzionava ( anche se non benissimo).

L'hardware viene riconosciuto
alberto@alberto-desktop:~$ sudo sane-find-scanner -p

 # sane-find-scanner will now attempt to detect your scanner. If the
 # result is different from what you expected, first make sure your
 # scanner is powered up and properly connected to your computer.

 # No SCSI scanners found. If you expected something different, make sure that
 # you have loaded a kernel SCSI driver for your SCSI adapter.

 # No USB scanners found. If you expected something different, make sure that
 # you have loaded a kernel driver for your USB host controller and have setup
 # the USB system correctly. See man sane-usb for details.
found possible Mustek parallel port scanner at "parport0"

 [glow=red,2,300]# Your Mustek parallel port scanner was detected.  It may or
 # may not be supported by SANE.  Please read the sane-mustek_pp
 # man-page for setup instructions.
[/glow]
 # Most Scanners connected to the parallel port or other proprietary ports
 # can't be detected by this program.
alberto@alberto-desktop:~$
Ma purtroppo non riesco a installare xsane da Software center. Il messaggio che mi appare è il seguente


Grazie