Pagina 1 di 1

Problemi con i driver ATI (Ubuntu 10.04)

Inviato: lunedì 10 maggio 2010, 18:24
da chillingham
Ciao a tutti, dopo aver eseguito una nuova installazione di Ubuntu 10.04 non posso regolare la risoluzione. La mia scheda video è ATI 3450. Ho provato installando da Sistema/Amministrazione/Driver hardware i "Driver grafici fglrx proprietari ATI/AMD" ma non cambia nulla. Poi ho disattivato "Driver grafici fglrx proprietari ATI/AMD" (sempre da amministrazione) ed ho scaricato il Catalist 10.4 ed ho eseguito questi passaggi:

1) Installate le dipendenze dando da terminale:

Codice:
sudo apt-get install build-essential fakeroot dh-make libstdc++6 gcc-4.4-base dkms module-assistant linux-headers-$(uname -r)

2) Inserite i driver nella vostra Home (/home/nome_utente/) e da terminale digitate:

Codice:
sudo chmod a+x ati-driver-installer-10-4-x86.x86_64.run

3) Ora potete far partire l'installazione dei driver dando sempre da terminale:

Codice:
sudo sh ./ati-driver-installer-10-1-x86.x86_64.run

e nel terminale compare questo:
ubuntu@ubuntu-desktop:~$ sudo chmod a+x ati-driver-installer-10-4-x86.x86_64.runubuntu@ubuntu-desktop:~$ sudo sh ./ati-driver-installer-10-1-x86.x86_64.run
sh: Can't open ./ati-driver-installer-10-1-x86.x86_64.run
ubuntu@ubuntu-desktop:~$

e quindi non parte l'installazione grafica...

Questo è il file xorg.conf:

Codice: Seleziona tutto

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "dri2"
	Load  "extmod"
	Load  "dri"
	Load  "dbe"
	Load  "record"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "CustomEDID"         	# [<str>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "ClockGating"        	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
        #Option     "ForceLowPowerMode"  	# [<bool>]
        #Option     "DynamicPM"          	# [<bool>]
        #Option     "NewPLL"             	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV620 LE [Radeon HD 3450]"
	BusID       "PCI:2:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
Dove sbaglio?

Re: Problemi con i driver ATI (Ubuntu 10.04)

Inviato: lunedì 10 maggio 2010, 21:01
da SirX
Ciao, probabilmente è un errore di copiatura nel momento in cui hai scritto sul forum, ma hai dato

Codice: Seleziona tutto

sudo sh ./ati-driver-installer-10-1-x86.x86_64.run
invece di

Codice: Seleziona tutto

sudo sh ./ati-driver-installer-10-4-x86.x86_64.run
Puoi controllare?

Re: Problemi con i driver ATI (Ubuntu 10.04)

Inviato: lunedì 10 maggio 2010, 22:42
da chillingham
SIr X ha scritto: Ciao, probabilmente è un errore di copiatura nel momento in cui hai scritto sul forum, ma hai dato

Codice: Seleziona tutto

sudo sh ./ati-driver-installer-10-1-x86.x86_64.run
invece di

Codice: Seleziona tutto

sudo sh ./ati-driver-installer-10-4-x86.x86_64.run
Puoi controllare?
Si hai ragione, avevo copiato quel comando da questa  guida:( http://forum.ubuntu-it.org/viewtopic.php?t=155477 )      e non mi ero accorto
ora è partita l'installazione grafica l'ho eseguita fino alla fine e poi ho dato i seguenti comandi:
Ora dobbiamo aggiornare la lista dei moduli da caricare dando:

Codice:
sudo depmod -a


Prima di riavviare, dovete configurare i driver, e quindi il Catalyst Control Center, dando:

Codice:
cd  /etc/X11
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv


A volte le modifiche non sono registrare all'interno dello xorg.conf. E' allora utile usare anche questo comando:

Codice:
sudo aticonfig --input=/etc/X11/xorg.conf --tls=1

Ma sembra che non si sono installati, che posso fare?

Re: Problemi con i driver ATI (Ubuntu 10.04)

Inviato: mercoledì 12 maggio 2010, 9:07
da chillingham
C'è qualcuno che saprebbe aiutarmi cortesemente?