Problemi all'avvio di Lucid

Problemi riscontrati durante l'installazione di Ubuntu, degli aggiornamenti e degli avanzamenti del sistema.
Avatar utente
ste_new
Prode Principiante
Messaggi: 40
Iscrizione: giovedì 12 marzo 2009, 5:13
Località: Montevarchi Arezzo
Contatti:

Problemi all'avvio di Lucid

Messaggio da ste_new »

Ciao

quando avvio Ubuntu mi appare una schermata piena di errori, scorre veloce e poi mi fa fare il log in, apparentemente funziona tutto bene, sto utilizzando lucid da 2 mesi, con solo alcuni problemi di sovrariscaldamento.

Sapreste dirmi come fare a catturare la schermata degli errori prima del log in, e poi successivamente a corregerli?

Grazie
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40370
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: Problemi all'avvio di Lucid

Messaggio da steff »

Codice: Seleziona tutto

dmesg
sei sicuro che sono errori e non i normali messaggi del kernel?
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
Avatar utente
ste_new
Prode Principiante
Messaggi: 40
Iscrizione: giovedì 12 marzo 2009, 5:13
Località: Montevarchi Arezzo
Contatti:

Re: Problemi all'avvio di Lucid

Messaggio da ste_new »

Ti Posto il risultato di dmesg

[    0.216591] system 00:06: ioport range 0x680-0x69f has been reserved
[    0.216594] system 00:06: ioport range 0x800-0x80f has been reserved
[    0.216597] system 00:06: ioport range 0x1000-0x107f has been reserved
[    0.216600] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    0.216603] system 00:06: ioport range 0x1640-0x164f has been reserved
[    0.216606] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[    0.251381] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.251386] pci 0000:00:1c.0:  IO window: 0x2000-0x2fff
[    0.251393] pci 0000:00:1c.0:  MEM window: 0xf6000000-0xf7ffffff
[    0.251399] pci 0000:00:1c.0:  PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[    0.251408] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[    0.251412] pci 0000:00:1c.1:  IO window: 0x3000-0x3fff
[    0.251419] pci 0000:00:1c.1:  MEM window: 0xf8000000-0xf9ffffff
[    0.251425] pci 0000:00:1c.1:  PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[    0.251434] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[    0.251438] pci 0000:00:1c.3:  IO window: 0x4000-0x4fff
[    0.251445] pci 0000:00:1c.3:  MEM window: 0xfa000000-0xfdffffff
[    0.251451] pci 0000:00:1c.3:  PREFETCH window: 0x000000f4000000-0x000000f5ffffff
[    0.251460] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[    0.251464] pci 0000:00:1c.5:  IO window: 0x5000-0x5fff
[    0.251471] pci 0000:00:1c.5:  MEM window: 0xfe200000-0xfe2fffff
[    0.251476] pci 0000:00:1c.5:  PREFETCH window: 0x80000000-0x801fffff
[    0.251485] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[    0.251487] pci 0000:00:1e.0:  IO window: disabled
[    0.251494] pci 0000:00:1e.0:  MEM window: 0xfe300000-0xfe3fffff
[    0.251499] pci 0000:00:1e.0:  PREFETCH window: disabled
[    0.251524]  alloc irq_desc for 17 on node -1
[    0.251526]  alloc kstat_irqs on node -1
[    0.251534] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.251540] pci 0000:00:1c.0: setting latency timer to 64
[    0.251551]  alloc irq_desc for 16 on node -1
[    0.251553]  alloc kstat_irqs on node -1
[    0.251557] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.251562] pci 0000:00:1c.1: setting latency timer to 64
[    0.251574]  alloc irq_desc for 19 on node -1
[    0.251575]  alloc kstat_irqs on node -1
[    0.251579] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.251584] pci 0000:00:1c.3: setting latency timer to 64
[    0.251595] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.251601] pci 0000:00:1c.5: setting latency timer to 64
[    0.251610] pci 0000:00:1e.0: setting latency timer to 64
[    0.251614] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.251617] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.251620] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.251623] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
[    0.251625] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[    0.251628] pci_bus 0000:04: resource 0 io:  [0x3000-0x3fff]
[    0.251631] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[    0.251633] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[    0.251636] pci_bus 0000:06: resource 0 io:  [0x4000-0x4fff]
[    0.251639] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfdffffff]
[    0.251641] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
[    0.251644] pci_bus 0000:08: resource 0 io:  [0x5000-0x5fff]
[    0.251647] pci_bus 0000:08: resource 1 mem: [0xfe200000-0xfe2fffff]
[    0.251649] pci_bus 0000:08: resource 2 pref mem [0x80000000-0x801fffff]
[    0.251652] pci_bus 0000:09: resource 1 mem: [0xfe300000-0xfe3fffff]
[    0.251655] pci_bus 0000:09: resource 3 io:  [0x00-0xffff]
[    0.251657] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff]
[    0.251709] NET: Registered protocol family 2
[    0.251822] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.252182] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.252688] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.252949] TCP: Hash tables configured (established 131072 bind 65536)
[    0.252952] TCP reno registered
[    0.253042] NET: Registered protocol family 1
[    0.253065] pci 0000:00:02.0: Boot video device
[    0.253250] Simple Boot Flag at 0x36 set to 0x1
[    0.253425] cpufreq-nforce2: No nForce2 chipset.
[    0.253452] Scanning for low memory corruption every 60 seconds
[    0.253579] audit: initializing netlink socket (disabled)
[    0.253592] type=2000 audit(1276677545.251:1): initialized
[    0.263684] highmem bounce pool size: 64 pages
[    0.263700] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.265296] VFS: Disk quotas dquot_6.5.2
[    0.265361] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.265948] fuse init (API version 7.13)
[    0.266037] msgmni has been set to 1690
[    0.266256] alg: No test for stdrng (krng)
[    0.266313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.266317] io scheduler noop registered
[    0.266319] io scheduler anticipatory registered
[    0.266322] io scheduler deadline registered
[    0.266361] io scheduler cfq registered (default)
[    0.266548]  alloc irq_desc for 24 on node -1
[    0.266550]  alloc kstat_irqs on node -1
[    0.266563] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.266576] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.266748]  alloc irq_desc for 25 on node -1
[    0.266750]  alloc kstat_irqs on node -1
[    0.266759] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.266770] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.266932]  alloc irq_desc for 26 on node -1
[    0.266934]  alloc kstat_irqs on node -1
[    0.266943] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[    0.266954] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.267120]  alloc irq_desc for 27 on node -1
[    0.267122]  alloc kstat_irqs on node -1
[    0.267131] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[    0.267143] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.267253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.267572] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 0 ss_did 0
[    0.267620] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    0.267644] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2841 ss_vid 0 ss_did 0
[    0.267698] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    0.267722] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 0 ss_did 0
[    0.267762] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[    0.267785] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 2849 ss_vid 0 ss_did 0
[    0.267826] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[    0.267834] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.268246] ACPI: AC Adapter [ACAD] (on-line)
[    0.268329] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.268370] ACPI: Lid Switch [LID]
[    0.268416] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.268419] ACPI: Power Button [PWRB]
[    0.268462] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.268464] ACPI: Sleep Button [SLPB]
[    0.268525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.268528] ACPI: Power Button [PWRF]
[    0.268643] fan PNP0C0B:00: registered as cooling_device0
[    0.268651] ACPI: Fan [FAN2] (off)
[    0.268729] fan PNP0C0B:01: registered as cooling_device1
[    0.268734] ACPI: Fan [FAN0] (off)
[    0.268810] fan PNP0C0B:02: registered as cooling_device2
[    0.268816] ACPI: Fan [FAN1] (off)
[    0.269481] ACPI: SSDT 7f6d4e92 0027A (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.270026] ACPI: SSDT 7f6d4823 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.272319] Monitor-Mwait will be used to enter C-1 state
[    0.272351] Monitor-Mwait will be used to enter C-2 state
[    0.272357] Marking TSC unstable due to TSC halts in idle
[    0.272403] processor LNXCPU:00: registered as cooling_device3
[    0.272777] ACPI: SSDT 7f6d510c 000FA (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.273139] ACPI: SSDT 7f6d4e0d 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.273666] Switching to clocksource hpet
[    0.276084] processor LNXCPU:01: registered as cooling_device4
[    0.280552] thermal LNXTHERM:01: registered as thermal_zone0
[    0.280561] ACPI: Thermal Zone [TZ00] (39 C)
[    0.281109] thermal LNXTHERM:02: registered as thermal_zone1
[    0.281117] ACPI: Thermal Zone [TZ01] (27 C)
[    0.282719] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.284149] brd: module loaded
[    0.284634] loop: module loaded
[    0.284729] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.284827] ata_piix 0000:00:1f.1: version 2.13
[    0.284841] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.284887] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.284987] scsi0 : ata_piix
[    0.285061] scsi1 : ata_piix
[    0.285682] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.285685] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.286036] Fixed MDIO Bus: probed
[    0.286070] PPP generic driver version 2.4.2
[    0.286108] tun: Universal TUN/TAP device driver, 1.6
[    0.286110] tun: (C) 1999-2004 Max Krasnyansky
[    0.286194] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.286215]  alloc irq_desc for 18 on node -1
[    0.286217]  alloc kstat_irqs on node -1
[    0.286223] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.286239] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.286243] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.286277] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.286308] ehci_hcd 0000:00:1a.7: debug port 1
[    0.290204] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.290221] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe604800
[    0.294174] isapnp: Scanning for PnP cards...
[    0.305886] ACPI: Battery Slot [BAT0] (battery present)
[    0.343273] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.343380] usb usb1: configuration #1 chosen from 1 choice
[    0.343410] hub 1-0:1.0: USB hub found
[    0.343419] hub 1-0:1.0: 4 ports detected
[    0.343481]  alloc irq_desc for 23 on node -1
[    0.343484]  alloc kstat_irqs on node -1
[    0.343489] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.343504] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.343508] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.343542] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.343571] ehci_hcd 0000:00:1d.7: debug port 1
[    0.347455] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.347469] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe604c00
[    0.429768] Freeing initrd memory: 7777k freed
[    0.433876] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.434047] usb usb2: configuration #1 chosen from 1 choice
[    0.434079] hub 2-0:1.0: USB hub found
[    0.434091] hub 2-0:1.0: 6 ports detected
[    0.434166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.434187] uhci_hcd: USB Universal Host Controller Interface driver
[    0.434243] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.434255] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.434259] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.434309] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.434354] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    0.434447] usb usb3: configuration #1 chosen from 1 choice
[    0.434473] hub 3-0:1.0: USB hub found
[    0.434481] hub 3-0:1.0: 2 ports detected
[    0.434532]  alloc irq_desc for 21 on node -1
[    0.434534]  alloc kstat_irqs on node -1
[    0.434540] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.434548] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.434551] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.434590] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.434627] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    0.434723] usb usb4: configuration #1 chosen from 1 choice
[    0.434749] hub 4-0:1.0: USB hub found
[    0.434756] hub 4-0:1.0: 2 ports detected
[    0.434809] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.434815] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.434819] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.434849] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.434877] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.434969] usb usb5: configuration #1 chosen from 1 choice
[    0.434994] hub 5-0:1.0: USB hub found
[    0.435002] hub 5-0:1.0: 2 ports detected
[    0.435052] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.435058] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.435062] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.435092] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.435128] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.435219] usb usb6: configuration #1 chosen from 1 choice
[    0.435247] hub 6-0:1.0: USB hub found
[    0.435254] hub 6-0:1.0: 2 ports detected
[    0.435302] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.435309] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.435313] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.435344] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.435372] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.435464] usb usb7: configuration #1 chosen from 1 choice
[    0.435498] hub 7-0:1.0: USB hub found
[    0.435505] hub 7-0:1.0: 2 ports detected
[    0.435608] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.441621] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.442274] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.442283] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.442286] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.442289] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.442292] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.442375] mice: PS/2 mouse device common for all mice
[    0.442527] rtc_cmos 00:07: RTC can wake from S4
[    0.442565] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.442599] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.442698] device-mapper: uevent: version 1.0.3
[    0.442842] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.442915] device-mapper: multipath: version 1.1.0 loaded
[    0.442918] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.443027] EISA: Probing bus 0 at eisa.0
[    0.443034] Cannot allocate resource for EISA slot 1
[    0.443036] Cannot allocate resource for EISA slot 2
[    0.443039] Cannot allocate resource for EISA slot 3
[    0.443041] Cannot allocate resource for EISA slot 4
[    0.443043] Cannot allocate resource for EISA slot 5
[    0.443058] EISA: Detected 0 cards.
[    0.443190] cpuidle: using governor ladder
[    0.443282] cpuidle: using governor menu
[    0.443752] TCP cubic registered
[    0.443908] NET: Registered protocol family 10
[    0.444424] lo: Disabled Privacy Extensions
[    0.444785] NET: Registered protocol family 17
[    0.445353] Using IPI No-Shortcut mode
[    0.445429] PM: Resume from disk failed.
[    0.445442] registered taskstats version 1
[    0.446000]  Magic number: 14:181:675
[    0.446055] vtconsole vtcon0: hash matches
[    0.446093] rtc_cmos 00:07: setting system clock to 2010-06-16 08:39:06 UTC (1276677546)
[    0.446097] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.446098] EDD information not available.
[    0.475737] ata1.00: ATAPI: MATSHITADVD-RAM UJ-875S, 1.00, max UDMA/66
[    0.492542] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.532538] ata1.00: configured for UDMA/66
[    0.656463] isapnp: No Plug & Play device found
[    0.658429] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-875S  1.00 PQ: 0 ANSI: 5
[    0.662858] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[    0.662861] Uniform CD-ROM driver Revision: 3.20
[    0.662953] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.663000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.663063] Freeing unused kernel memory: 660k freed
[    0.663488] Write protecting the kernel text: 4680k
[    0.663546] Write protecting the kernel read-only data: 1840k
[    0.680553] udev: starting version 151
[    0.744041] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    0.754897] sky2 driver version 1.25
[    0.754944] sky2 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.754960] sky2 0000:08:00.0: setting latency timer to 64
[    0.754989] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
[    0.755102]  alloc irq_desc for 28 on node -1
[    0.755104]  alloc kstat_irqs on node -1
[    0.755121] sky2 0000:08:00.0: irq 28 for MSI/MSI-X
[    0.755862] sky2 eth0: addr 00:14:0b:3f:a1:32
[    0.756117] ahci 0000:00:1f.2: version 3.0
[    0.756132] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.756170]  alloc irq_desc for 29 on node -1
[    0.756172]  alloc kstat_irqs on node -1
[    0.756182] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[    0.756253] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    0.756256] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[    0.756262] ahci 0000:00:1f.2: setting latency timer to 64
[    0.767990] scsi2 : ahci
[    0.786529] scsi3 : ahci
[    0.811412] scsi4 : ahci
[    0.811593] ata3: SATA max UDMA/133 abar m2048@0xfe604000 port 0xfe604100 irq 29
[    0.811597] ata4: SATA max UDMA/133 abar m2048@0xfe604000 port 0xfe604180 irq 29
[    0.811601] ata5: SATA max UDMA/133 abar m2048@0xfe604000 port 0xfe604200 irq 29
[    0.814474] sata_sil24 0000:06:00.0: version 1.1
[    0.814499] sata_sil24 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.814572] sata_sil24 0000:06:00.0: setting latency timer to 64
[    0.814739] scsi5 : sata_sil24
[    0.814801] ata6: SATA max UDMA/100 host m128@0xfc000000 port 0xfa000000 irq 19
[    0.891239] usb 2-2: configuration #1 chosen from 1 choice
[    0.898215] Initializing USB Mass Storage driver...
[    0.898344] scsi6 : SCSI emulation for USB Mass Storage devices
[    0.898440] usbcore: registered new interface driver usb-storage
[    0.898443] USB Mass Storage support registered.
[    0.898448] usb-storage: device found at 2
[    0.898450] usb-storage: waiting for device to settle before scanning
[    1.004040] usb 2-6: new high speed USB device using ehci_hcd and address 3
[    1.128038] ata4: SATA link down (SStatus 0 SControl 300)
[    1.132045] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.132067] ata5: SATA link down (SStatus 0 SControl 300)
[    1.132617] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[    1.132625] ata3.00: _GTF unexpected object type 0x1
[    1.187188] ata3.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[    1.187192] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.188068] ata3.00: _GTF unexpected object type 0x1
[    1.188319] ata3.00: configured for UDMA/133
[    1.204157] scsi 2:0:0:0: Direct-Access    ATA      WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
[    1.204321] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.204348] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.204415] sd 2:0:0:0: [sda] Write Protect is off
[    1.204417] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.204443] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.204586]  sda: sda1 sda2
[    1.232484] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.416592] usb 2-6: configuration #1 chosen from 1 choice
[    1.664032] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    1.832475] usb 3-1: configuration #1 chosen from 1 choice
[    2.892052] ata6: SATA link down (SStatus 0 SControl 0)
[    2.895420] ohci1394 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.899884] usbcore: registered new interface driver hiddev
[    2.914677] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input6
[    2.914773] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[    2.914797] usbcore: registered new interface driver usbhid
[    2.914800] usbhid: v2.6:USB HID core driver
[    2.954073] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[fe300000-fe3007ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    3.250438] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    4.232142] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040ca01450009b6]
[    5.302695] Adding 6010872k swap on /dev/sda5.  Priority:-1 extents:1 across:6010872k
[    5.774504] udev: starting version 151
[    5.907903] usb-storage: device scan complete
[    5.915314] scsi 6:0:0:0: Direct-Access    Generic- Multi-Card      1.00 PQ: 0 ANSI: 0 CCS
[    5.915807] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    5.935036] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    7.573817] type=1505 audit(1276677553.625:2):  operation="profile_load" pid=541 name="/sbin/dhclient3"
[    7.574508] type=1505 audit(1276677553.625:3):  operation="profile_load" pid=541 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    7.574878] type=1505 audit(1276677553.625:4):  operation="profile_load" pid=541 name="/usr/lib/connman/scripts/dhclient-script"
[    7.951550] Linux agpgart interface v0.103
[    7.984631] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    7.985226] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    7.989901] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    8.027050] cfg80211: Calling CRDA to update world regulatory domain
[    8.032951] Linux video capture interface: v2.00
[    8.151173] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0202)
[    8.312504] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input7
[    8.312605] usbcore: registered new interface driver uvcvideo
[    8.312644] USB Video Class driver (v0.1.0)
[    8.417274] [drm] Initialized drm 1.1.0 20060810
[    8.686126] lp: driver loaded but no devices found
[    8.742605] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x39a0b2, caps: 0xa04753/0x200000
[    8.783811] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    9.086701] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.086707] i915 0000:00:02.0: setting latency timer to 64
[    9.090826]  alloc irq_desc for 30 on node -1
[    9.090830]  alloc kstat_irqs on node -1
[    9.090839] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[    9.090847] [drm] set up 7M of stolen space
[    9.372801] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[    9.372804] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[    9.372869] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    9.372878] iwlagn 0000:04:00.0: setting latency timer to 64
[    9.372912] iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[    9.417166] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[    9.417232]  alloc irq_desc for 31 on node -1
[    9.417234]  alloc kstat_irqs on node -1
[    9.417254] iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
[    9.568267] [drm] initialized overlay support
[  10.030047] fb0: inteldrmfb frame buffer device
[  10.030050] registered panic notifier
[  10.030691] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[  10.031434] acpi device:02: registered as cooling_device5
[  10.032106] ACPI Warning: _BQC returned an invalid level (20090903/video-631)
[  10.033184] acpi device:03: registered as cooling_device6
[  10.033485] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[  10.033568] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  10.033626] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[  10.311214] cfg80211: World regulatory domain updated:
[  10.311217] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  10.311220] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  10.311223] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  10.311225] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  10.311227] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  10.311230] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  10.464962] vga16fb: initializing
[  10.464966] vga16fb: mapped to 0xc00a0000
[  10.464970] vga16fb: not registering due to another framebuffer present
[  10.799026] phy0: Selected rate control algorithm 'iwl-agn-rs'
[  10.888612]  alloc irq_desc for 22 on node -1
[  10.888616]  alloc kstat_irqs on node -1
[  10.888623] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  10.888683] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  11.223087] Console: switching to colour frame buffer device 160x50
[  11.341936] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[  11.342111] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[  11.342246] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  14.640256] type=1505 audit(1276677560.693:5):  operation="profile_load" pid=862 name="/usr/share/gdm/guest-session/Xsession"
[  14.642087] type=1505 audit(1276677560.693:6):  operation="profile_replace" pid=863 name="/sbin/dhclient3"
[  14.642723] type=1505 audit(1276677560.693:7):  operation="profile_replace" pid=863 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  14.643065] type=1505 audit(1276677560.693:8):  operation="profile_replace" pid=863 name="/usr/lib/connman/scripts/dhclient-script"
[  14.877254] type=1505 audit(1276677560.929:9):  operation="profile_load" pid=864 name="/usr/bin/evince"
[  14.885463] type=1505 audit(1276677560.937:10):  operation="profile_load" pid=864 name="/usr/bin/evince-previewer"
[  14.890711] type=1505 audit(1276677560.941:11):  operation="profile_load" pid=864 name="/usr/bin/evince-thumbnailer"
[  15.352581] type=1505 audit(1276677561.405:12):  operation="profile_load" pid=871 name="/usr/lib/cups/backend/cups-pdf"
[  15.353419] type=1505 audit(1276677561.405:13):  operation="profile_load" pid=871 name="/usr/sbin/cupsd"
[  15.478096] type=1505 audit(1276677561.531:14):  operation="profile_load" pid=872 name="/usr/sbin/tcpdump"
[  15.775622] sky2 eth0: enabling interface
[  15.775821] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  17.501352] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[  17.501525] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  19.488073] device eth0 entered promiscuous mode
[  21.243917] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[  21.243920] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[  21.243922] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[  21.243923] vboxdrv: the usage of hardware performance counters by
[  21.243924] vboxdrv:  echo 2 > /proc/sys/kernel/perf_counter_paranoid
[  21.243928] vboxdrv: Found 2 processor cores.
[  21.244031] vboxdrv: fAsync=0 offMin=0x1cc offMax=0xd02
[  21.245096] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  21.245099] vboxdrv: Successfully loaded version 3.2.4 (interface 0x00140001).
[  21.812448] ppdev: user-space parallel port driver
[  27.720023] eth0: no IPv6 routers present
stefano@Butsu:~$
Avatar utente
steff
Moderatore Globale
Moderatore Globale
Messaggi: 40370
Iscrizione: domenica 18 febbraio 2007, 19:48
Desktop: LXQt+labwc
Distribuzione: Arch; Debian; Ubuntu Server
Sesso: Maschile
Località: Toscana
Contatti:

Re: Problemi all'avvio di Lucid

Messaggio da steff »

Non vedo errori.

Per favore incolla la prossima volta un affare così tra tag "codice" (bottone # sopra la faccine)  :)
Hai fatto un backup oggi? Ieri?? Quando???
La Documentazione da consultare e la FAQ sul uso del forum
Sistemi: LXQt - semplice, modulare e configurabile + *ubuntu in Vbox
Avatar utente
ste_new
Prode Principiante
Messaggi: 40
Iscrizione: giovedì 12 marzo 2009, 5:13
Località: Montevarchi Arezzo
Contatti:

Re: Problemi all'avvio di Lucid

Messaggio da ste_new »

ok Grazie

la prossima volta lo farò. Non so se posso cancellare....

ciao
Scrivi risposta

Ritorna a “Installazione e aggiornamento del sistema operativo”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti