Pagina 1 di 1

ubuntu problemi di avvio [risolto]

Inviato: venerdì 18 giugno 2010, 14:19
da dave.ita
buongiorno a tutti.
da pochi giorni ho installato ubuntu sul mio vecchio portatile (acer travelmate 2700) per ridargli un po' di vita.
grazie al forum ed alle varie guide sono riuscito a far funzionare tutto, dal wireless ad hotmail su evolution, però ho spesso un paio di  problemi:
1- quando accendo il pc 4 volte su 5 invece di avviarsi fa una schermata con un sacco di scritte, diventa tutto nero e non fa piu' nulla. l'unica alternativa è spegnere e riaccendere finchè non parte definitivamente.
2- usando firefox a volte si blocca tutto. il puntatore non si muove e nessun tasto fa nulla. anche li l'unica opzione è forzare lo spegnimento tramite pulsante e poi riavviare.

c'è un modo per risolverli?

Risolto il primo problema!!!
invece di usare come consigliato il :nomodeset in grub ho usato come da consiglio trovato sul sito inglese il radeon.modeset=1

adeso sembra funzionare tutto...

Re: ubuntu problemi di avvio

Inviato: venerdì 18 giugno 2010, 15:25
da gativa
All'avvio, quando ti compare grub premi 'e' ed aggiungi nomodeset dopo splash (se non ti compare grub avvia tenendo premuto shift). Chiudi con ctrl+x. Così dovresti riuscire ad avviare. Se funziona per renderlo definitivo vedi
https://wiki.ubuntu.com/LucidLynx/ReleaseNotes/it#Aggirare%20gli%20errori%20della%20nuova%20architettura%20video%20del%20kernel

Le scritte che ti compaiono le trovi in /var/log/dmesg. Vedi se ci sono errori.

Re: ubuntu problemi di avvio

Inviato: venerdì 18 giugno 2010, 18:38
da dave.ita
gativa ha scritto: All'avvio, quando ti compare grub premi 'e' ed aggiungi nomodeset dopo splash (se non ti compare grub avvia tenendo premuto shift). Chiudi con ctrl+x. Così dovresti riuscire ad avviare. Se funziona per renderlo definitivo vedi
https://wiki.ubuntu.com/LucidLynx/ReleaseNotes/it#Aggirare%20gli%20errori%20della%20nuova%20architettura%20video%20del%20kernel

Le scritte che ti compaiono le trovi in /var/log/dmesg. Vedi se ci sono errori.
grub non l'ho mai visto, di solito o parte o non parte...

come faccio a sapere se nel file dmesg ci sono errori??

Re: ubuntu problemi di avvio

Inviato: sabato 19 giugno 2010, 11:14
da gativa
dave.ita ha scritto: grub non l'ho mai visto, di solito o parte o non parte...
Se sul portatile hai installato un solo sistema operativo è normale che grub non compaia. Ti avevo scritto di usare shift all'avvio per farlo comparire, hai provato?
dave.ita ha scritto: come faccio a sapere se nel file dmesg ci sono errori??
postalo qua, possibilmente mettendolo tra i tag [ code] e [ /code] (ma senza spazio dopo la parentesi quadra) o usando il pulsantino col disegno del cancelletto che trovi nella seconda riga di pulsanti quando rispondi al messaggio.

Re: ubuntu problemi di avvio

Inviato: sabato 19 giugno 2010, 18:59
da dave.ita
gativa ha scritto:

Se sul portatile hai installato un solo sistema operativo è normale che grub non compaia. Ti avevo scritto di usare shift all'avvio per farlo comparire, hai provato?

postalo qua, possibilmente mettendolo tra i tag [ code] e [ /code] (ma senza spazio dopo la parentesi quadra) o usando il pulsantino col disegno del cancelletto che trovi nella seconda riga di pulsanti quando rispondi al messaggio.
sul portatile ho un solo sistema operativo. con grub ho provato, ha fatto il primo avvio, l'ho inserito nel file come da istruzioni, e dall'avvio successivo ha di nuovo cominciato a non partire....

ecco il dettaglio del file che mi hai suggerito

Codice: Seleziona tutto

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000047f70000 (usable)
[    0.000000]  BIOS-e820: 0000000047f70000 - 0000000047f7b000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000047f7b000 - 0000000047f80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000047f80000 - 0000000048000000 (reserved)
[    0.000000]  BIOS-e820: 0000000057f80000 - 0000000058000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x47f70 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-D3FFF write-back
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FF8000000 write-back
[    0.000000]   2 base 047F80000 mask FFFF80000 uncachable
[    0.000000]   3 base 057F80000 mask FFFF80000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d0000 - 00000000000d8000 (reserved)
[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000047f70000 (usable)
[    0.000000]  modified: 0000000047f70000 - 0000000047f7b000 (ACPI data)
[    0.000000]  modified: 0000000047f7b000 - 0000000047f80000 (ACPI NVS)
[    0.000000]  modified: 0000000047f80000 - 0000000048000000 (reserved)
[    0.000000]  modified: 0000000057f80000 - 0000000058000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 3583a000 - 35fd354e
[    0.000000] ACPI: RSDP 000f69b0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 47f773e8 00030 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 47f7af24 00074 (v01 COMPAL ELW80    06040000 ATI  00000003)
[    0.000000] ACPI: DSDT 47f7788e 03696 (v01 COMPAL    ELW80 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 47f7ffc0 00040
[    0.000000] ACPI: APIC 47f7af98 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 47f77418 001FB (v01  PmRef    CpuPm 00003000 INTL 20030224)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 263MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [003583a000 - 0035fd354e]          RAMDISK ==> [003583a000 - 0035fd354e]
[    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #6 [00008da000 - 00008dd0ad]              BRK ==> [00008da000 - 00008dd0ad]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00f6950] f6950
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x00047f70
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00047f70
[    0.000000] On node 0 totalpages: 294655
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 527 pages used for memmap
[    0.000000]   HighMem zone: 66915 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 58000000 (gap: 58000000:a6c00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u2097152
[    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 292352
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=298ecfc6-44a1-4ca1-b396-af737b855ce7 ro quiet splash nomodeset
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5895040 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:00047f70)
[    0.000000] Memory: 1146052k/1179072k available (4673k kernel code, 31768k reserved, 2121k data, 656k init, 269768k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590663 - 0xc07a2e48   (2121 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590663   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3199.571 MHz processor.
[    0.004025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.14 BogoMIPS (lpj=12798284)
[    0.004075] Security Framework initialized
[    0.004165] AppArmor: AppArmor initialized
[    0.004183] Mount-cache hash table entries: 512
[    0.008073] Initializing cgroup subsys ns
[    0.008089] Initializing cgroup subsys cpuacct
[    0.008095] Initializing cgroup subsys memory
[    0.008121] Initializing cgroup subsys devices
[    0.008125] Initializing cgroup subsys freezer
[    0.008136] Initializing cgroup subsys net_cls
[    0.008211] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.008215] CPU: L2 cache: 512K
[    0.008226] CPU: Physical Processor ID: 0
[    0.008228] CPU: Processor Core ID: 0
[    0.008242] mce: CPU supports 4 MCE banks
[    0.008272] CPU0: Thermal monitoring enabled (TM1)
[    0.008306] Performance Events: no PMU driver, software events only.
[    0.008323] Checking 'hlt' instruction... OK.
[    0.031205] ACPI: Core revision 20090903
[    0.052037] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.052052] ftrace: allocating 21771 entries in 43 pages
[    0.056144] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.056240]   alloc irq_desc for 21 on node 0
[    0.056243]   alloc kstat_irqs on node 0
[    0.056374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.060001] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.060001] ..... (found apic 0 pin 2) ...
[    0.103505] ....... works.
[    0.103507] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
[    0.104001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU1: Thermal monitoring enabled (TM1)
[    0.188065] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
[    0.188081] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.192030] CPU1: Temperature above threshold, cpu clock throttled (total events = 1)
[    0.192030] Disabling lock debugging due to kernel taint
[    0.192051] CPU1: Temperature/speed normal
[    0.192061] Brought up 2 CPUs
[    0.192067] Total of 2 processors activated (12799.01 BogoMIPS).
[    0.192339] CPU0 attaching sched-domain:
[    0.192351]  domain 0: span 0-1 level SIBLING
[    0.192354]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.192363]   domain 1: span 0-1 level MC
[    0.192366]    groups: 0-1 (cpu_power = 1178)
[    0.192375] CPU1 attaching sched-domain:
[    0.192377]  domain 0: span 0-1 level SIBLING
[    0.192381]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.192388]   domain 1: span 0-1 level MC
[    0.192391]    groups: 0-1 (cpu_power = 1178)
[    0.192631] devtmpfs: initialized
[    0.192631] regulator: core version 0.5
[    0.192631] Time: 18:39:46  Date: 06/18/10
[    0.192631] NET: Registered protocol family 16
[    0.192631] Trying to unpack rootfs image as initramfs...
[    0.192646] EISA bus registered
[    0.192667] ACPI: bus type pci registered
[    0.219467] PCI: PCI BIOS revision 2.10 entry at 0xfd768, last bus=2
[    0.219479] PCI: Using configuration type 1 for base access
[    0.225084] bio: create slab <bio-0> at 0
[    0.227838] ACPI: EC: Look up EC in DSDT
[    0.236397] ACPI: Interpreter enabled
[    0.236432] ACPI: (supports S0 S3 S4 S5)
[    0.236525] ACPI: Using IOAPIC for interrupt routing
[    0.253835] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[    0.254506] ACPI: No dock devices found.
[    0.256809] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.257028] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd2000000-0xd3ffffff]
[    0.257050] pci 0000:00:00.0: reg 14 32bit mmio: [0xd0000000-0xd0000fff]
[    0.257307] pci 0000:00:13.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
[    0.257441] pci 0000:00:13.1: reg 10 32bit mmio: [0xd0002000-0xd0002fff]
[    0.257590] pci 0000:00:13.2: reg 10 32bit mmio: [0xd0003000-0xd0003fff]
[    0.257694] pci 0000:00:13.2: supports D1 D2
[    0.257705] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.257719] pci 0000:00:13.2: PME# disabled
[    0.257793] pci 0000:00:14.0: reg 10 io port: [0x8060-0x806f]
[    0.257815] pci 0000:00:14.0: reg 14 32bit mmio: [0xd0004000-0xd00043ff]
[    0.257925] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[    0.257949] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[    0.257970] pci 0000:00:14.1: reg 18 io port: [0x170-0x177]
[    0.257989] pci 0000:00:14.1: reg 1c io port: [0x374-0x377]
[    0.257998] pci 0000:00:14.1: reg 20 io port: [0x8070-0x807f]
[    0.258136] pci 0000:00:14.5: reg 10 32bit mmio: [0xd0004400-0xd00044ff]
[    0.258194] pci 0000:00:14.6: reg 10 32bit mmio: [0xd0004800-0xd00048ff]
[    0.258418] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
[    0.258440] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[    0.258461] pci 0000:01:05.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
[    0.258512] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.258572] pci 0000:01:05.0: supports D1 D2
[    0.258680] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[    0.258695] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
[    0.258712] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
[    0.258825] pci 0000:02:02.0: reg 10 io port: [0xa400-0xa41f]
[    0.258850] pci 0000:02:02.0: reg 14 32bit mmio: [0xd0200800-0xd020081f]
[    0.258875] pci 0000:02:02.0: reg 18 32bit mmio: [0xd0200000-0xd02007ff]
[    0.258979] pci 0000:02:02.0: supports D2
[    0.259100] pci 0000:02:03.0: reg 10 io port: [0xa000-0xa0ff]
[    0.259125] pci 0000:02:03.0: reg 14 32bit mmio: [0xd0200c00-0xd0200cff]
[    0.259252] pci 0000:02:03.0: supports D1 D2
[    0.259263] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[    0.259282] pci 0000:02:03.0: PME# disabled
[    0.259405] pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.259466] pci 0000:02:04.0: supports D1 D2
[    0.259470] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.259477] pci 0000:02:04.0: PME# disabled
[    0.259527] pci 0000:00:14.4: transparent bridge
[    0.259535] pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
[    0.259541] pci 0000:00:14.4: bridge 32bit mmio: [0xd0200000-0xd02fffff]
[    0.259577] pci_bus 0000:00: on NUMA node 0
[    0.259586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.259858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.260375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.268325] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
[    0.268756] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
[    0.269018] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
[    0.269191] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
[    0.269785] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.269812] vgaarb: loaded
[    0.270368] SCSI subsystem initialized
[    0.270595] libata version 3.00 loaded.
[    0.271115] usbcore: registered new interface driver usbfs
[    0.271178] usbcore: registered new interface driver hub
[    0.271285] usbcore: registered new device driver usb
[    0.271793] ACPI: WMI: Mapper loaded
[    0.271804] PCI: Using ACPI for IRQ routing
[    0.272600] NetLabel: Initializing
[    0.272611] NetLabel:  domain hash size = 128
[    0.272620] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.272681] NetLabel:  unlabeled traffic allowed by default
[    0.272776] Switching to clocksource tsc
[    0.280655] AppArmor: AppArmor Filesystem Enabled
[    0.280745] pnp: PnP ACPI init
[    0.280844] ACPI: bus type pnp registered
[    0.293532] pnp: PnP ACPI: found 10 devices
[    0.293540] ACPI: ACPI bus type pnp unregistered
[    0.293549] PnPBIOS: Disabled by ACPI PNP
[    0.293589] system 00:07: ioport range 0x1080-0x1080 has been reserved
[    0.293596] system 00:07: ioport range 0x220-0x22f has been reserved
[    0.293603] system 00:07: ioport range 0x40b-0x40b has been reserved
[    0.293607] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.293612] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[    0.293634] system 00:07: ioport range 0x530-0x537 has been reserved
[    0.293653] system 00:07: ioport range 0xc00-0xc01 has been reserved
[    0.293675] system 00:07: ioport range 0xc14-0xc14 has been reserved
[    0.293688] system 00:07: ioport range 0xc50-0xc52 has been reserved
[    0.293704] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[    0.293727] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[    0.293740] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[    0.293754] system 00:07: ioport range 0x8000-0x805f has been reserved
[    0.293766] system 00:07: ioport range 0xf40-0xf47 has been reserved
[    0.293780] system 00:07: ioport range 0x280-0x293 has been reserved
[    0.293822] system 00:08: iomem range 0xe0000-0xfffff could not be reserved
[    0.293842] system 00:08: iomem range 0xfff80000-0xffffffff has been reserved
[    0.293856] system 00:08: iomem range 0xd0000000-0xd0000fff has been reserved
[    0.329909] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.329924] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    0.329939] pci 0000:00:01.0:   MEM window: 0xd0100000-0xd01fffff
[    0.329954] pci 0000:00:01.0:   PREFETCH window: 0xe0000000-0xefffffff
[    0.329985] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[    0.329998] pci 0000:02:04.0:   IO window: 0x00a800-0x00a8ff
[    0.330013] pci 0000:02:04.0:   IO window: 0x00ac00-0x00acff
[    0.330020] pci 0000:02:04.0:   PREFETCH window: 0x58000000-0x5bffffff
[    0.330035] pci 0000:02:04.0:   MEM window: 0x5c000000-0x5fffffff
[    0.330050] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[    0.330063] pci 0000:00:14.4:   IO window: 0xa000-0xafff
[    0.330077] pci 0000:00:14.4:   MEM window: 0xd0200000-0xd02fffff
[    0.330091] pci 0000:00:14.4:   PREFETCH window: 0x58000000-0x5bffffff
[    0.330169]   alloc irq_desc for 16 on node -1
[    0.330173]   alloc kstat_irqs on node -1
[    0.330201] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.330228] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.330263] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.330293] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
[    0.330320] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
[    0.330339] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.330366] pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
[    0.330388] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd02fffff]
[    0.330428] pci_bus 0000:02: resource 2 pref mem [0x58000000-0x5bffffff]
[    0.330458] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.330505] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.330554] pci_bus 0000:03: resource 0 io:  [0xa800-0xa8ff]
[    0.330584] pci_bus 0000:03: resource 1 io:  [0xac00-0xacff]
[    0.330603] pci_bus 0000:03: resource 2 pref mem [0x58000000-0x5bffffff]
[    0.330628] pci_bus 0000:03: resource 3 mem: [0x5c000000-0x5fffffff]
[    0.330907] NET: Registered protocol family 2
[    0.331324] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.332826] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.336480] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.338359] TCP: Hash tables configured (established 131072 bind 65536)
[    0.338390] TCP reno registered
[    0.339123] NET: Registered protocol family 1
[    0.931317] pci 0000:01:05.0: Boot video device
[    0.931809] cpufreq-nforce2: No nForce2 chipset.
[    0.931915] Scanning for low memory corruption every 60 seconds
[    0.932423] audit: initializing netlink socket (disabled)
[    0.932469] type=2000 audit(1276886386.931:1): initialized
[    0.958248] highmem bounce pool size: 64 pages
[    0.958274] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.965878] VFS: Disk quotas dquot_6.5.2
[    0.966158] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.969123] fuse init (API version 7.13)
[    0.969507] msgmni has been set to 1713
[    0.970873] alg: No test for stdrng (krng)
[    0.971210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.971224] io scheduler noop registered
[    0.971228] io scheduler anticipatory registered
[    0.971240] io scheduler deadline registered
[    0.971384] io scheduler cfq registered (default)
[    0.971905] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.971998] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.974440] ACPI: AC Adapter [ACAD] (on-line)
[    0.974778] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.974927] ACPI: Lid Switch [LID]
[    0.975099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.975159] ACPI: Power Button [PWRB]
[    0.975587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.975618] ACPI: Power Button [PWRF]
[    0.977297] ACPI: SSDT 47f77679 00215 (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
[    0.979114] processor LNXCPU:00: registered as cooling_device0
[    0.979960] ACPI: SSDT 47f77613 00066 (v01  PmRef  Cpu1Cst 00003000 INTL 20030224)
[    0.981146] processor LNXCPU:01: registered as cooling_device1
[    0.994877] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.995110] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.996476]   alloc irq_desc for 17 on node -1
[    0.996490]   alloc kstat_irqs on node -1
[    0.996510] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.996526] serial 0000:00:14.6: PCI INT B disabled
[    1.001304] brd: module loaded
[    1.003331] isapnp: Scanning for PnP cards...
[    1.044560] ACPI: Battery Slot [BAT1] (battery present)
[    1.054380] loop: module loaded
[    1.055052] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.055774] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.057370] Fixed MDIO Bus: probed
[    1.057526] PPP generic driver version 2.4.2
[    1.057759] tun: Universal TUN/TAP device driver, 1.6
[    1.057770] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.058200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.058293]   alloc irq_desc for 19 on node -1
[    1.058305]   alloc kstat_irqs on node -1
[    1.058338] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.058420] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.058768] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[    1.058938] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0003000
[    1.104118] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.104627] usb usb1: configuration #1 chosen from 1 choice
[    1.104748] hub 1-0:1.0: USB hub found
[    1.104794] hub 1-0:1.0: 6 ports detected
[    1.105148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.105240] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.105303] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.105486] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    1.105547] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0001000
[    1.196322] usb usb2: configuration #1 chosen from 1 choice
[    1.196431] hub 2-0:1.0: USB hub found
[    1.196475] hub 2-0:1.0: 3 ports detected
[    1.196675] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.196736] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.196876] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    1.196938] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0002000
[    1.255849] usb usb3: configuration #1 chosen from 1 choice
[    1.255957] hub 3-0:1.0: USB hub found
[    1.255991] hub 3-0:1.0: 3 ports detected
[    1.256207] uhci_hcd: USB Universal Host Controller Interface driver
[    1.256524] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.263442] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.263589] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.263635] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.263641] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.263654] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.263667] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.264071] mice: PS/2 mouse device common for all mice
[    1.264495] rtc_cmos 00:03: RTC can wake from S4
[    1.264634] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.264680] rtc0: alarms up to one month, 114 bytes nvram
[    1.265083] device-mapper: uevent: version 1.0.3
[    1.291953] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.343597] device-mapper: multipath: version 1.1.0 loaded
[    1.343613] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.344286] EISA: Probing bus 0 at eisa.0
[    1.344305] Cannot allocate resource for EISA slot 1
[    1.344352] Cannot allocate resource for EISA slot 8
[    1.344363] EISA: Detected 0 cards.
[    1.356102] cpuidle: using governor ladder
[    1.356115] cpuidle: using governor menu
[    1.357912] TCP cubic registered
[    1.358358] NET: Registered protocol family 10
[    1.360008] lo: Disabled Privacy Extensions
[    1.361203] NET: Registered protocol family 17
[    1.361418] Using IPI No-Shortcut mode
[    1.361818] PM: Resume from disk failed.
[    1.361863] registered taskstats version 1
[    1.362414]   Magic number: 14:394:696
[    1.362647] rtc_cmos 00:03: setting system clock to 2010-06-18 18:39:47 UTC (1276886387)
[    1.362661] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.362664] EDD information not available.
[    1.371285] isapnp: No Plug & Play device found
[    1.373138] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.397456] Freeing initrd memory: 7781k freed
[    1.427308] Freeing unused kernel memory: 656k freed
[    1.430193] Write protecting the kernel text: 4676k
[    1.430318] Write protecting the kernel read-only data: 1840k
[    1.497299] udev: starting version 151
[    1.731569] usb 2-3: new low speed USB device using ohci_hcd and address 2
[    1.871422] scsi0 : pata_atiixp
[    1.893836] scsi1 : pata_atiixp
[    1.899639] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8070 irq 14
[    1.899661] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8078 irq 15
[    1.964606] usb 2-3: configuration #1 chosen from 1 choice
[    2.090455] ata1.00: ATA-6: ST94019A, 3.05, max UDMA/100
[    2.090468] ata1.00: 78140160 sectors, multi 16: LBA48 
[    2.105247] ata1.00: configured for UDMA/100
[    2.105616] scsi 0:0:0:0: Direct-Access     ATA      ST94019A         3.05 PQ: 0 ANSI: 5
[    2.106267] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.106282] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.106465] sd 0:0:0:0: [sda] Write Protect is off
[    2.106478] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.106864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.107449]  sda:
[    2.268606] ata2.00: ATAPI: Optiarc DVD RW AD-7540A, 1.01, max UDMA/33
[    2.284542] ata2.00: configured for UDMA/33
[    2.293155] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7540A  1.01 PQ: 0 ANSI: 5
[    2.313099] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.313114] Uniform CD-ROM driver Revision: 3.20
[    2.313499] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.313713] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.355387]  sda1 sda2 < sda5 >
[    2.386495] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.401473] usbcore: registered new interface driver hiddev
[    2.412474] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.412595] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    2.414807] input: HID 04d9:048e as /devices/pci0000:00/0000:00:13.0/usb2/2-3/2-3:1.0/input/input5
[    2.415428] generic-usb 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:13.0-3/input0
[    2.415559] usbcore: registered new interface driver usbhid
[    2.415566] usbhid: v2.6:USB HID core driver
[    2.426441] 8139too Fast Ethernet driver 0.9.28
[    2.426623] 8139too 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.431352] eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:5f:23:2a, IRQ 19
[    2.913387] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.913403] EXT4-fs (sda1): write access will be enabled during recovery
[    4.886780] EXT4-fs (sda1): orphan cleanup on readonly fs
[    4.886812] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1836164
[    4.887057] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1835411
[    4.887117] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1836614
[    4.887214] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1836608
[    4.887307] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1836612
[    4.895185] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1836609
[    4.895306] EXT4-fs (sda1): 6 orphan inodes deleted
[    4.895311] EXT4-fs (sda1): recovery complete
[    5.110640] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   19.963296] udev: starting version 151
[   20.045664] Adding 1648632k swap on /dev/sda5.  Priority:-1 extents:1 across:1648632k 
[   20.071229] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[   20.351219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.549814] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8060, revision 0
[   21.052126] irda_init()
[   21.052215] NET: Registered protocol family 23
[   21.151822] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input6
[   21.152781] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   21.254783] Linux agpgart interface v0.103
[   21.322623] type=1505 audit(1276879207.458:2):  operation="profile_load" pid=534 name="/sbin/dhclient3"
[   21.327599] type=1505 audit(1276879207.462:3):  operation="profile_load" pid=534 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   21.332544] type=1505 audit(1276879207.466:4):  operation="profile_load" pid=534 name="/usr/lib/connman/scripts/dhclient-script"
[   21.406909] ndiswrapper: driver neti2220 (LanExpress,03/29/2004,2.10.03.2004) loaded
[   21.407940]   alloc irq_desc for 18 on node -1
[   21.407954]   alloc kstat_irqs on node -1
[   21.407987] ndiswrapper 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   21.570394] [drm] Initialized drm 1.1.0 20060810
[   21.573193] ndiswrapper: using IRQ 18
[   21.787572] wlan0: ethernet device 00:0e:9b:6c:e9:67 using NDIS driver: neti2220, version: 0x2000a, NDIS version: 0x501, vendor: 'INPROCOMM IPN2220 Wireless LAN Adapter', 17FE:2220.5.conf
[   21.787677] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
[   21.788094] yenta_cardbus 0000:02:04.0: CardBus bridge found [1025:0065]
[   21.788155] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[   21.788167] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[   21.788184] yenta_cardbus 0000:02:04.0: TI: mfunc 0x00111c12, devctl 0x44
[   21.869064] [drm] VGACON disable radeon kernel modesetting.
[   21.870003] pci 0000:01:05.0: power state changed by ACPI to D0
[   21.870036] pci 0000:01:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.870706] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:05.0 on minor 0
[   21.887867] vga16fb: initializing
[   21.887898] vga16fb: mapped to 0xc00a0000
[   21.888592] fb0: VGA16 VGA frame buffer device
[   21.928499] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[   21.967703] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[   22.021058] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0a68, PCI irq 16
[   22.021073] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[   22.021104] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[   22.021120] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: clean.
[   22.021859] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[   22.021874] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x58000000 - 0x5bffffff
[   22.040229] usbcore: registered new interface driver ndiswrapper
[   22.199086] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   22.200313] atiixp: codec reset timeout
[   22.275792] Console: switching to colour frame buffer device 80x30
[   22.365906] lp: driver loaded but no devices found
[   22.536621] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   22.539436] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   22.540651] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   22.542168] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   22.543875] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   22.674680] type=1505 audit(1276879208.810:5):  operation="profile_load" pid=691 name="/usr/share/gdm/guest-session/Xsession"
[   22.708200] type=1505 audit(1276879208.842:6):  operation="profile_replace" pid=692 name="/sbin/dhclient3"
[   22.709557] type=1505 audit(1276879208.846:7):  operation="profile_replace" pid=692 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   22.710325] type=1505 audit(1276879208.846:8):  operation="profile_replace" pid=692 name="/usr/lib/connman/scripts/dhclient-script"
[   22.716633] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   22.839762] type=1505 audit(1276879208.974:9):  operation="profile_load" pid=694 name="/usr/bin/evince"
[   22.847319] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.882944] eth0: link down
[   22.897390] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.910095] type=1505 audit(1276879209.046:10):  operation="profile_load" pid=694 name="/usr/bin/evince-previewer"
[   22.940811] type=1505 audit(1276879209.074:11):  operation="profile_load" pid=694 name="/usr/bin/evince-thumbnailer"

Re: ubuntu problemi di avvio

Inviato: lunedì 21 giugno 2010, 0:44
da dave.ita
neesuno mi sa dire se ci sono errori?? :'(