Pagina 1 di 1

Ubuntu 9.04 su unità esterna

Inviato: sabato 19 giugno 2010, 18:30
da appennino
Ho installato Ubuntu 9.04 su un'unità esterna Packard Bell a cui ho dedicato una partizione di 40 GB. Primo problema: Grub Error 22 e non c'è verso di farla partire. Ho provato più precedenze dal Bios ma il risultato è sempre lo stesso. A forza di riavvii, quando riesce a partire, il sistema è di una lentezza assurda quasi ad arrivare a piantarsi anche solo usando Firefox.
Visto che nel disco interno ho una partizione con la 10.09 e che gira bene pensavo di eliminare quella sul disco esterno e rcuperare i 40GB. (A parte che se qualcuno mi spiega il perchè non mi si avvia e perchè gira così lentamente, la 9 potrei anche tenerla, a patto di risolvere entrambi i problemi).
Comunque se la tolgo posso avere problemi al momento del Boot Loader? E potrò togliere le strighe all'avvio che riguardano il S.O. tolto? Grazie

Re: Ubuntu 9.04 su unità esterna

Inviato: sabato 19 giugno 2010, 18:38
da MarcoDuc
appennino ha scritto: Ho installato Ubuntu 9.04 su un'unità esterna Packard Bell a cui ho dedicato una partizione di 40 GB. Primo problema: Grub Error 22 e non c'è verso di farla partire. Ho provato più precedenze dal Bios ma il risultato è sempre lo stesso. A forza di riavvii, quando riesce a partire, il sistema è di una lentezza assurda quasi ad arrivare a piantarsi anche solo usando Firefox.
Visto che nel disco interno ho una partizione con la 10.09 e che gira bene pensavo di eliminare quella sul disco esterno e rcuperare i 40GB. (A parte che se qualcuno mi spiega il perchè non mi si avvia e perchè gira così lentamente, la 9 potrei anche tenerla, a patto di risolvere entrambi i problemi).
Comunque se la tolgo posso avere problemi al momento del Boot Loader? E potrò togliere le strighe all'avvio che riguardano il S.O. tolto? Grazie
non è una saggia idea usare i supporti esterni, non vanno come gli hd.

quando lo reinstalli nell'hd l'mbr viene sovrascritto quindi elimini le vecchie voci.

Re: Ubuntu 9.04 su unità esterna

Inviato: sabato 19 giugno 2010, 18:39
da steff
Il grub dove l'hai installato? Dovrebbe essere sul disco usb e forse con grub vecchio produce errore 22 o altro perché si deve correggere il menu.lst, ma non capisco
a) come fai a avviare lo stesso
b) la lentezza che non c'entra con grub

Re: Ubuntu 9.04 su unità esterna

Inviato: sabato 19 giugno 2010, 19:14
da appennino
Ho installato per seconda la versione 9. sul disco esterno, ma ho lasciato la scelta di default al momento dell'installazione del Boot Loader, comunque vi invio il Menu.lst (è un pò lungo)....Si curamente è sull' hd0 perchè avvio sia Vista che la 10 anche se non ho attaccato l'HD esterno.

# menu.lst - See: grub (8), info grub, update-grub (8)
#            grub-install (8), grub-floppy (8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet

title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro  single
initrd /boot/initrd.img-2.6.32-22-generic

title Ubuntu 10.04 LTS, kernel 2.6.24-27-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-27-generic root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro quiet splash
initrd /boot/initrd.img-2.6.24-27-generic
quiet

title Ubuntu 10.04 LTS, kernel 2.6.24-27-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.24-27-generic root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro  single
initrd /boot/initrd.img-2.6.24-27-generic

title Ubuntu 10.04 LTS, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb6.
title Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sdb6)
root (hd1,5)
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=f7699ff2-012c-4e12-9eaf-68945e112c0b ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb6.
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sdb6)
root (hd1,5)
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=f7699ff2-012c-4e12-9eaf-68945e112c0b ro single
initrd /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb6.
title Ubuntu 9.04, memtest86+ (on /dev/sdb6)
root (hd1,5)
kernel /boot/memtest86+.bin 
savedefault
boot

Al posto delle "faccine" c'è un OTTO. Scusate non sono un esperto!

Comunque se la spiano quella esterna corro il rischio che non mi parte più niente? Saluti.

Re: Ubuntu 9.04 su unità esterna

Inviato: sabato 19 giugno 2010, 19:23
da MarcoDuc
inseriscilo nel tag code :)

Codice: Seleziona tutto

# menu.lst - See: grub (Cool, info grub, update-grub (Cool
#            grub-install (Cool, grub-floppy (Cool,
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root      (hd0,4)
kernel      /boot/vmlinuz-2.6.32-22-generic root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro quiet splash
initrd      /boot/initrd.img-2.6.32-22-generic
quiet

title      Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
root      (hd0,4)
kernel      /boot/vmlinuz-2.6.32-22-generic root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro  single
initrd      /boot/initrd.img-2.6.32-22-generic

title      Ubuntu 10.04 LTS, kernel 2.6.24-27-generic
root      (hd0,4)
kernel      /boot/vmlinuz-2.6.24-27-generic root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro quiet splash
initrd      /boot/initrd.img-2.6.24-27-generic
quiet

title      Ubuntu 10.04 LTS, kernel 2.6.24-27-generic (recovery mode)
root      (hd0,4)
kernel      /boot/vmlinuz-2.6.24-27-generic root=UUID=b5af5472-0403-42d8-99f8-7900dd930708 ro  single
initrd      /boot/initrd.img-2.6.24-27-generic

title      Ubuntu 10.04 LTS, memtest86+
root      (hd0,4)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title      Windows Vista/Longhorn (loader)
root      (hd0,0)
savedefault
makeactive
chainloader   +1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title      Windows Vista/Longhorn (loader)
root      (hd0,1)
savedefault
makeactive
chainloader   +1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb6.
title      Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sdb6)
root      (hd1,5)
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=f7699ff2-012c-4e12-9eaf-68945e112c0b ro quiet splash
initrd      /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb6.
title      Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sdb6)
root      (hd1,5)
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=f7699ff2-012c-4e12-9eaf-68945e112c0b ro single
initrd      /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb6.
title      Ubuntu 9.04, memtest86+ (on /dev/sdb6)
root      (hd1,5)
kernel      /boot/memtest86+.bin 
savedefault
boot

Re: Ubuntu 9.04 su unità esterna

Inviato: sabato 19 giugno 2010, 20:34
da steff
Mi rimane un mistero come fai a farlo partire, di solito le porte usb non sono viste ancora in quel momento.
Per il boot in teoria si installa grub sulla penna, poi tocca a modificare il suo menu.lst in quanta non torna più la voce:
root      (hd1,5)
in quanto se dal bios si avvia da usb questo diventa il primo disco, quindi:
root      (hd0,5)

Se vuoi provare dalla versione 10 con la penna inserita dai

Codice: Seleziona tutto

sudo grub
find /boot/grub/stage1
quit
e posta il risultato

Re: Ubuntu 9.04 su unità esterna

Inviato: venerdì 25 giugno 2010, 0:08
da appennino
Per STEFF: non ho una penna ma un Hard Disk esterno con cavo USB.
Per MARCO DUC: non ho capito cosa devo inserire nel Tag Code e dove sia....il Tag Code...(sorry!!) ???

Re: Ubuntu 9.04 su unità esterna

Inviato: venerdì 25 giugno 2010, 7:09
da steff
Il tag "codice" : clicca il bottone # sopra la faccine qui.

Penna o disco USB è lo stesso.