Forum Ubuntu-it

Il forum della comunità italiana di Ubuntu.
https://forum.ubuntu-it.org/

[Risolto] Pc morto dopo aggiornamento a 11.10

https://forum.ubuntu-it.org/viewtopic.php?f=30&t=486276

Pagina 3 di 9

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:18
da TenenteClick

Codice: Seleziona tutto

valerio@valerio:$ sudo service lightdm stop
stop: Unknown instance:
valerio@valerio:$ sudo service lightdm start
lightdm start/running, process 1960
valerio@valerio:$ sudo service gdm stop
stop: unknown instance:
valerio@valerio:$ sudo service gdm start
gdm start/running, process 1990

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:19
da hellojoker
ok alt + f7 vedi se c'è la schermata di login per tornare indietro alt-f1

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:21
da TenenteClick
No, resta come prima a parte che si ferma a *Checking battery state      [OK]

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:23
da hellojoker
sudo dpkg-reconfigure lightdm nel menu che ti appare seleziona lightdm dopo

sudo service  gdm stop

sudo service lightdm start

se ancora non va sudo killall Xorg (dovrebbe ripartire in automatico)

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:39
da TenenteClick

Codice: Seleziona tutto

 dpkg-mainscript-helper: warning: environment variable DPKG_MAINSCRIPT_NAME missing
dpkg-mainscript-helper: warning: environment variable DPKG_MAINSCRIPT_PACKAGE missing
valerio@valerio:$ sudo service gdm stop
stop: Unknown instance:
valerio@valerio:$ sudo service lightdm start
lightdm start/running, process 2123
dopo di che mi torna alla schermata precedente, come quando premo alt+f7

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:41
da hellojoker
con sudo  killall Xorg hai provato?

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:43
da TenenteClick
ah si mi sono dimenticato di scriverlo, non succede nulla, mi passa alla riga sotto e basta

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:50
da hellojoker
Vuol dire che l'ha fermato adesso prova startx

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:52
da TenenteClick
Funziona  ;D ;D (b2b)

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 17:58
da hellojoker
Avessi immaginato ti avrei detto di darlo prima quando te l'ha detto l'altro ragazzo magari funzionava e risparmiavi fatica, comunque tutto bene quel che finisce bene  ;)

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 18:02
da TenenteClick
Magari fosse finito... l'ho riavviato e siamo da capo...

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 18:07
da hellojoker
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.backup riavvia

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 18:20
da Ganci11
TenenteClick ha scritto: Magari fosse finito... l'ho riavviato e siamo da capo...
Ma scusa se scarica il CD di Ubuntu 11.10, entri in modalita Live CD, ti salvi tutti i dati in un HDD esterno e poi installi tutto da capo dal CD?

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 18:21
da TenenteClick
riavviato, ma non è cambiato nulla...  :'(
Ganci11 ha scritto:
TenenteClick ha scritto: Magari fosse finito... l'ho riavviato e siamo da capo...
Ma scusa se scarica il CD di Ubuntu 11.10, entri in modalita Live CD, ti salvi tutti i dati in un HDD esterno e poi installi tutto da capo dal CD?
mi viene più semplice aggiustarlo, e poi non ho l'hard disk

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 18:40
da TenenteClick
Ho rifatto:

Codice: Seleziona tutto

 sudo dpkg-reconfigure lightdm
sudo service gdm stop
sudo service lightdm start
sudo killall Xorg
startx
ed è ripartito, c'è un modo di rendere definitive queste operazioni per non farle ogni volta?

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 18:43
da hellojoker
bisogna capire perchè non parte x vediamo se il log ci aiuta cat /var/log/Xorg.0.log

ps di tutti i comandi sopra ti serve solo startx

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 18:48
da TenenteClick

Codice: Seleziona tutto

[   926.505] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[   926.508] (II) fglrx(0): Enable composite support successfully
[   926.508] (II) fglrx(0): X context handle = 0x1
[   926.508] (II) fglrx(0): [DRI] installation complete
[   926.508] (==) fglrx(0): Silken mouse enabled
[   926.508] (==) fglrx(0): Using HW cursor of display infrastructure!
[   926.508] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[   926.509] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[   926.509] (II) fglrx(0): Cannot set TV horizontal size.
[   926.509] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
[   926.509] (II) fglrx(0): Cannot set TV horizontal position.
[   926.509] (II) fglrx(0): Cannot set TV vertical position.
[   926.572] (--) RandR disabled
[   926.572] (II) Initializing built-in extension Generic Event Extension
[   926.572] (II) Initializing built-in extension SHAPE
[   926.572] (II) Initializing built-in extension MIT-SHM
[   926.572] (II) Initializing built-in extension XInputExtension
[   926.572] (II) Initializing built-in extension XTEST
[   926.572] (II) Initializing built-in extension BIG-REQUESTS
[   926.572] (II) Initializing built-in extension SYNC
[   926.572] (II) Initializing built-in extension XKEYBOARD
[   926.572] (II) Initializing built-in extension XC-MISC
[   926.572] (II) Initializing built-in extension SECURITY
[   926.572] (II) Initializing built-in extension XINERAMA
[   926.572] (II) Initializing built-in extension XFIXES
[   926.572] (II) Initializing built-in extension RENDER
[   926.572] (II) Initializing built-in extension RANDR
[   926.572] (II) Initializing built-in extension COMPOSITE
[   926.572] (II) Initializing built-in extension DAMAGE
[   926.572] (II) Initializing built-in extension GESTURE
[   926.575] ukiDynamicMajor: found major device number 250
[   926.575] ukiDynamicMajor: found major device number 250
[   926.575] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   926.575] ukiOpenDevice: node name is /dev/ati/card0
[   926.575] ukiOpenDevice: open result is 17, (OK)
[   926.575] ukiOpenByBusid: ukiOpenMinor returns 17
[   926.575] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   926.669] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[   926.683] (II) fglrx(0): Enable the clock gating!
[   926.683] (II) fglrx(0): Setting screen physical size to 444 x 277
[   926.692] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   926.700] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   926.700] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   926.700] (II) LoadModule: "evdev"
[   926.700] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   926.701] (II) Module evdev: vendor="X.Org Foundation"
[   926.701] 	compiled for 1.10.2, module version = 2.6.0
[   926.701] 	Module class: X.Org XInput Driver
[   926.701] 	ABI class: X.Org XInput driver, version 12.3
[   926.701] (II) Using input driver 'evdev' for 'Power Button'
[   926.701] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   926.701] (**) Power Button: always reports core events
[   926.701] (**) Power Button: Device: "/dev/input/event1"
[   926.701] (--) Power Button: Found keys
[   926.701] (II) Power Button: Configuring as keyboard
[   926.701] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   926.701] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   926.701] (**) Option "xkb_rules" "evdev"
[   926.701] (**) Option "xkb_model" "pc105"
[   926.701] (**) Option "xkb_layout" "it"
[   926.703] (II) XKB: reuse xkmfile /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm
[   926.706] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   926.706] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   926.706] (II) Using input driver 'evdev' for 'Power Button'
[   926.706] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   926.706] (**) Power Button: always reports core events
[   926.706] (**) Power Button: Device: "/dev/input/event0"
[   926.706] (--) Power Button: Found keys
[   926.706] (II) Power Button: Configuring as keyboard
[   926.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[   926.706] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   926.706] (**) Option "xkb_rules" "evdev"
[   926.706] (**) Option "xkb_model" "pc105"
[   926.706] (**) Option "xkb_layout" "it"
[   926.707] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[   926.707] (II) No input driver/identifier specified (ignoring)
[   926.708] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event3)
[   926.708] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[   926.708] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[   926.708] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   926.708] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[   926.708] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Device: "/dev/input/event3"
[   926.708] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found keys
[   926.708] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as keyboard
[   926.708] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3/event3"
[   926.708] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD)
[   926.709] (**) Option "xkb_rules" "evdev"
[   926.709] (**) Option "xkb_model" "pc105"
[   926.709] (**) Option "xkb_layout" "it"
[   926.709] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event4)
[   926.709] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev pointer catchall"
[   926.709] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[   926.709] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[   926.709] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   926.709] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[   926.709] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Device: "/dev/input/event4"
[   926.709] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found 9 mouse buttons
[   926.709] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found scroll wheel(s)
[   926.709] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found relative axes
[   926.709] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found x and y relative axes
[   926.709] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found absolute axes
[   926.709] (II) evdev-grail: failed to open grail, no gesture support
[   926.709] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found keys
[   926.709] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as mouse
[   926.709] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as keyboard
[   926.709] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Adding scrollwheel support
[   926.710] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: YAxisMapping: buttons 4 and 5
[   926.710] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   926.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4/event4"
[   926.710] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD)
[   926.710] (**) Option "xkb_rules" "evdev"
[   926.710] (**) Option "xkb_model" "pc105"
[   926.710] (**) Option "xkb_layout" "it"
[   926.710] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: initialized for relative axes.
[   926.710] (WW) Microsoft Microsoft® 2.4GHz Transceiver v8.0: ignoring absolute axes.
[   926.710] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) keeping acceleration scheme 1
[   926.710] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration profile 0
[   926.710] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[   926.710] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[   926.710] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
[   926.710] (II) No input driver/identifier specified (ignoring)
[   926.711] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event5)
[   926.711] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[   926.711] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[   926.711] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   926.711] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[   926.711] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Device: "/dev/input/event5"
[   926.711] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found 1 mouse buttons
[   926.711] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found scroll wheel(s)
[   926.711] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found relative axes
[   926.711] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found absolute axes
[   926.711] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found x and y absolute axes
[   926.711] (--) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found keys
[   926.711] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as mouse
[   926.711] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as keyboard
[   926.711] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Adding scrollwheel support
[   926.711] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: YAxisMapping: buttons 4 and 5
[   926.711] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   926.711] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/input/input5/event5"
[   926.711] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD)
[   926.711] (**) Option "xkb_rules" "evdev"
[   926.711] (**) Option "xkb_model" "pc105"
[   926.711] (**) Option "xkb_layout" "it"
[   926.712] (EE) Microsoft Microsoft® 2.4GHz Transceiver v8.0: failed to initialize for relative axes.
[   926.713] (WW) Touch X valuator does not match pointer X valuator, pointer emulation may be incorrect
[   926.713] (WW) Touch Y valuator does not match pointer Y valuator, pointer emulation may be incorrect
[   926.714] (II) Microsoft Microsoft® 2.4GHz Transceiver v8.0: initialized for absolute axes.
[   926.714] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) keeping acceleration scheme 1
[   926.714] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration profile 0
[   926.714] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[   926.714] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[   926.714] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
[   926.714] (II) No input driver/identifier specified (ignoring)
[   926.720] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[   926.720] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   926.720] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   926.720] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   926.720] (**) AT Translated Set 2 keyboard: always reports core events
[   926.720] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[   926.720] (--) AT Translated Set 2 keyboard: Found keys
[   926.720] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   926.720] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[   926.720] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   926.720] (**) Option "xkb_rules" "evdev"
[   926.720] (**) Option "xkb_model" "pc105"
[   926.720] (**) Option "xkb_layout" "it"
[   926.770] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   930.226] Warning: LookupWindow()/SecurityLookupWindow() are deprecated.  Please convert your driver/module to use dixLookupWindow().
[   931.850] (II) Quirked EDID physical size to 0x0 cm
[   931.850] (II) fglrx(0): EDID vendor "SAM", prod id 1010
[   931.850] (II) fglrx(0): Using hsync ranges from config file
[   931.850] (II) fglrx(0): Using vrefresh ranges from config file
[   931.850] (II) fglrx(0): Printing DDC gathered Modelines:
[   931.850] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[   931.850] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[   931.850] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[   931.850] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz)
[   931.850] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[   931.850] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[   931.850] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[   931.850] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   931.850] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   931.850] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   931.850] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[   931.850] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[   931.850] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   931.850] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[   931.850] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   931.850] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   931.850] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   931.850] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   931.850] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   931.850] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   931.850] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   931.850] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   931.850] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[   931.850] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[   931.850] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[   931.850] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[   931.850] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[   931.850] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz)
[   931.850] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz)
[   931.850] (II) fglrx(0): Modeline "2880x480"x0.0  108.00  2880 2944 3192 3432  480 489 495 525 -hsync -vsync (31.5 kHz)
[   932.111] (WW) fglrx(0): Cannot get updated TV attributes.
[   934.516] (II) Quirked EDID physical size to 0x0 cm
[   934.516] (II) fglrx(0): EDID vendor "SAM", prod id 1010
[   934.516] (II) fglrx(0): Using hsync ranges from config file
[   934.516] (II) fglrx(0): Using vrefresh ranges from config file
[   934.516] (II) fglrx(0): Printing DDC gathered Modelines:
[   934.516] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[   934.516] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[   934.516] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[   934.516] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz)
[   934.516] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[   934.516] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[   934.516] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[   934.516] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   934.516] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   934.516] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   934.516] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[   934.516] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[   934.516] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   934.516] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[   934.516] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   934.516] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   934.516] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   934.516] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   934.516] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   934.516] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   934.516] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   934.516] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   934.516] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[   934.516] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[   934.516] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[   934.516] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[   934.516] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[   934.516] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz)
[   934.516] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz)
[   934.516] (II) fglrx(0): Modeline "2880x480"x0.0  108.00  2880 2944 3192 3432  480 489 495 525 -hsync -vsync (31.5 kHz)
[   934.775] (WW) fglrx(0): Cannot get updated TV attributes.
[   934.837] (II) Quirked EDID physical size to 0x0 cm
[   934.837] (II) fglrx(0): EDID vendor "SAM", prod id 1010
[   934.837] (II) fglrx(0): Using hsync ranges from config file
[   934.837] (II) fglrx(0): Using vrefresh ranges from config file
[   934.837] (II) fglrx(0): Printing DDC gathered Modelines:
[   934.837] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[   934.837] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[   934.837] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[   934.837] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz)
[   934.837] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[   934.837] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[   934.837] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[   934.837] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   934.837] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   934.837] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   934.837] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[   934.837] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[   934.837] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   934.837] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[   934.837] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   934.837] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   934.837] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   934.837] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   934.837] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   934.837] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   934.837] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   934.837] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   934.837] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[   934.837] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[   934.837] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[   934.837] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[   934.837] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[   934.837] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz)
[   934.837] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz)
[   934.837] (II) fglrx(0): Modeline "2880x480"x0.0  108.00  2880 2944 3192 3432  480 489 495 525 -hsync -vsync (31.5 kHz)
[   935.098] (WW) fglrx(0): Cannot get updated TV attributes.
[   937.932] (II) Quirked EDID physical size to 0x0 cm
[   937.932] (II) fglrx(0): EDID vendor "SAM", prod id 1010
[   937.932] (II) fglrx(0): Using hsync ranges from config file
[   937.932] (II) fglrx(0): Using vrefresh ranges from config file
[   937.932] (II) fglrx(0): Printing DDC gathered Modelines:
[   937.932] (II) fglrx(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[   937.932] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
[   937.932] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[   937.932] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz)
[   937.932] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[   937.932] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[   937.932] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
[   937.932] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   937.932] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   937.932] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   937.932] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[   937.932] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[   937.932] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   937.933] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[   937.933] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   937.933] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   937.933] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   937.933] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   937.933] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   937.933] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   937.933] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   937.933] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   937.933] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[   937.933] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[   937.933] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[   937.933] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[   937.933] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[   937.933] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz)
[   937.933] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz)
[   937.933] (II) fglrx(0): Modeline "2880x480"x0.0  108.00  2880 2944 3192 3432  480 489 495 525 -hsync -vsync (31.5 kHz)
[   948.347] (II) XKB: reuse xkmfile /var/lib/xkb/server-9A8405F3FE0A780485714A4B6DD41909C2CF9F83.xkm

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 19:27
da hellojoker
Non saprei al momento non mi viene in mente nulla :-\

Prova rimuovendo con sudo rm -f /tmp/.X0-lock e poi Xorg :0 -configure ma non ci sperare troppo


ovviamente dopo riavvia

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 21:29
da hellojoker
Prova a fare questo tentativo sudo nano /etc/default/grub

trova la riga GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" e aggiungi nomodeset

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"

salva con crtl + o esci con crtl +x

poi sudo update-grub e riavvia

Re: Pc morto dopo aggiornamento a 11.10

Inviato: lunedì 17 ottobre 2011, 22:01
da Tausinux
ciao helloj, ho provato a fare tutte le modifiche da te proposte ma alla fine penso che reinstallerò...
ora ho due problemi:
non ho fatto il backup di evolution.. posso farlo da shell?
se entro con livecd non ho i permessi per aprire le cartelle dell'utente superuser (quello mio), se copio le cartelle su hd esterno e poi le ricopio dopo installazione nuova riesco ad aprirle? (creando n utente con lo stesso nome del precedente)
mah che casino ho fatto oh >:(
Tutti gli orari sono UTC+02:00 Europa/Roma
Pagina 3 di 9

Basato su phpBB® Forum Software © phpBB Limited • PostgreSQL© • Megmoticons©