Pagina 1 di 1
Grub rescue dopo l'avvio: come fare?
Inviato: domenica 19 febbraio 2017, 18:18
da IvanPsy
Chiedo scusa: so che è già stato postato un problema simile, ma è stato contrassegnato come risolto, quindi mi permetto di proporre il mio problema in questo nuovo thread.
Ho provato con vari tutorial trovati sul Web, ma nessuna procedura è arrivata a compimento.
Spengo il PC, lo riaccendo, e mi compare initrans, poi il prompt grub rescue, dicendomi che
Codice: Seleziona tutto
error: attempt to read or write outside of the disk 'hd0'
Da Live USB si avvia, ma non riesco ad accedere all'HD: con un fdisk vedo che esiste la sda, ma se da file manager digito /dev/sda1 (la partizione che mi viene flaggata come Linux e come boot) non mi compare nulla.
Ho provato con Boot Repair, mi analizza l'HD ma non mi da l'opzione per ripararlo.
Qui che cosa mi ha trovato:
http://paste2.org/LY42zEZ0
Nessuna procedura che ho trovato sul Web, sia da terminale della Live che da grub rescue ha funzionato.
Solitamente mi da errore quando c'è da montare la partizione o fare qualche operazione simile.
Anche i tentativi di ripristinare il Grub non hanno funzionato: tutti mi hanno segnalato errore in un punto o nell'altro.
Come posso fare?
A me non interessa l'HD in sè: è ormai molto vecchi e comunque vogli cambiare PC.
A me interessa riuscire ad accedere ai file conservati nell'HD.
Re: Grub rescue dopo l'avvio: come fare?
Inviato: domenica 19 febbraio 2017, 18:39
da ivantu
Se ti interessa recuperare i dati fai prima ad compreare un hdd esterno e con una versione live di ubuntu e un software tipo di Recovery 'TestDisk', copiarti tutto.
Il problema che visualizzo nel file c'è un errore di input/output, cosa che ti chiedo, dove hai installato il sistema? dev/sda1?
sembra che gli mancherebbe il flag di boot...
In Live, avvia il disco fisso, e posta qui il comando
e un'altra domanda, quando gli dai il comando di ripristino MBR, dove lo imposti? nel disco
sda o
sdb?
Re: Grub rescue dopo l'avvio: come fare?
Inviato: lunedì 20 febbraio 2017, 19:40
da IvanPsy
ivantu ti ringrazio per la risposta.
Ho provato TestDisk, ma non mi permette di accedere all-elenco dei file contenuti in questo HD> mi dice che non pu; farlo per via del filesystem.
Quindi adesso non so come fare almeno a recuperare i file, a meno che non esistano altri tool piu` potenti di TestDisk.
Eccoti i comandi che mi hai chiesto (tieni conto che adesso ho montato l`HD dentro il PC)...
sudo fdisk -l
Codice: Seleziona tutto
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 852.1 MiB, 893485056 bytes, 1745088 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000ca81a
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 968452095 968450048 461.8G 83 Linux
/dev/sda2 968454142 976771071 8316930 4G 5 Extended
/dev/sda5 968454144 976771071 8316928 4G 82 Linux swap / Solaris
Disk /dev/sdb: 3.8 GiB, 4051697664 bytes, 7913472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x7fd3dc57
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 32 7913471 7913440 3.8G c W95 FAT32 (LBA)
Disk /dev/zram0: 979.6 MiB, 1027190784 bytes, 250779 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 979.6 MiB, 1027190784 bytes, 250779 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
sudo parted -l
Codice: Seleziona tutto
Model: ATA SAMSUNG HM500JI (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 496GB 496GB primary boot
2 496GB 500GB 4258MB extended
5 496GB 500GB 4258MB logical linux-swap(v1)
Model: USB Flash DISK (scsi)
Disk /dev/sdb: 4052MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 16.4kB 4052MB 4052MB primary fat32 boot, lba
Model: Unknown (unknown)
Disk /dev/zram1: 1027MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 1027MB 1027MB linux-swap(v1)
Model: Unknown (unknown)
Disk /dev/zram0: 1027MB
Sector size (logical/physical): 4096B/4096B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 1027MB 1027MB linux-swap(v1)
Re: Grub rescue dopo l'avvio: come fare?
Inviato: martedì 21 febbraio 2017, 9:35
da ivantu
il flag boot mi sembra ok.
ora da Live, proviamo a controllare lo stato del disco. Con la rete internet connessa, installa questo pacchetto
e poi copia l'output al comando
sostituisci /dev/sd* l'asterisco con
a o
b, ti dico perchè succede che avvolte in live potrebbero invertirsi, avendo collegato anche un altro secondo disco.
Poi riporta qui l'output di questo comando
per poter riparare il filesystem. Assicurati di non aver il disco in uso, quindi dallo da Live.
Re: Grub rescue dopo l'avvio: come fare?
Inviato: mercoledì 22 febbraio 2017, 19:08
da IvanPsy
Eccomi! Ti chiedo scusa, ma spesso sono fuori per lavoro e non tutte le sere riesco a mettere mano al PC.
Ecco quello che mi hai chiesto...
sudo smartctl -a /dev/sda
Codice: Seleziona tutto
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M7
Device Model: SAMSUNG HM500JI
Serial Number: S208JD0SA27665
LU WWN Device Id: 5 0024e9 0024d31ca
Firmware Version: 2AC101C4
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Wed Feb 22 18:01:07 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8160) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 136) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 1237
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 045 025 Pre-fail Always - 3060
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4577
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12778
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 210
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4434
191 G-Sense_Error_Rate 0x0022 099 099 000 Old_age Always - 13879
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 22 (Min/Max 5/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 13
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 59
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 210
225 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 9743016
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sudo fsck /dev/sda1
Codice: Seleziona tutto
fsck from util-linux 2.28.2
e2fsck 1.43.3 (04-Sep-2016)
fsck.ext2: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1
Could this be a zero-length partition?
Prossimo step?
Grazie!
Re: Grub rescue dopo l'avvio: come fare?
Inviato: mercoledì 22 febbraio 2017, 19:25
da ivantu
Disco è ok.
Filesystem della partizione /dev/sda1 è in sola lettura...
Riesci ad accedere (mount) alla partizione con il problema dalla Live? e ridai l'ultimo comando
Re: Grub rescue dopo l'avvio: come fare?
Inviato: mercoledì 22 febbraio 2017, 20:49
da IvanPsy
Scusa l'ignoranza, ma come utilizzo il comando "mount", in questo caso?
Grazie!
Re: Grub rescue dopo l'avvio: come fare?
Inviato: giovedì 23 febbraio 2017, 16:02
da ivantu
per fare il mount, in Live.
Se utilizzi ubuntu, apri il gestore directory Nautilus, nella scheda... a sinistra in Devices, già dovresti vedere con le "etichette" delle partizioni nel disco fisso se sono attive.
Re: Grub rescue dopo l'avvio: come fare?
Inviato: giovedì 23 febbraio 2017, 23:09
da IvanPsy
Su Nautilus non vedo l`HD, e neanche l`etichetta Devices (tieni conto che sto usando Lubuntu, ed ho anche installato il Nautilus per sicurezza).
Su Disks lo vedo, ma mi da partition type e contents unknown.
Con Gparted inizia a cercare i dispositivi, ma dopo un po` mi da un errore in scrittura\lettura per il sda, ossia il dispositivo incriminato.
Re: Grub rescue dopo l'avvio: come fare?
Inviato: venerdì 24 febbraio 2017, 11:47
da ivantu
guarda questa discussione trovata in rete
recupero dati su disco unknown