[risolto] crash dopo aggiornamento a 17.10, se inattivo

Problemi riscontrati durante l'installazione di Ubuntu, degli aggiornamenti e degli avanzamenti del sistema.
Scrivi risposta
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

[risolto] crash dopo aggiornamento a 17.10, se inattivo

Messaggio da duns »

Mi è stato fatto notare che in questo topic ho parlato di più problemi. Me ne scuso. Non cambio tutti i post che ormai ho ... postato, ma modificando questo primo post focalizzo su un problema. Sia nella versione di Kubuntu aggiornata da 17.04 sia nella istallazione da zero, ho un problema di mini-crash.
Cioè dopo un certo tempo di inattività il pc va in "ibernazione" (dico io) e né muovendo il mouse né premendo tasti della tastiera si risveglia: devo fare alt+stamp+r e poi alt+stamp+e e allora ho un logout, o meglio ho la schermata di login. Questo è un problema. Ovviamente non ho attivato né prima né dopo l'aggiornamento l'opzione suspend session, che del resto non è selezionata; qualche idea?

Aggiungevo, quando ho creato il topic quest'altro problema, che mi sembrava connesso, ma che adesso lascerei perdere: una partizione ntfs dopo il crash viene smontata.

Potete saltare dei post intermedi e andare a questo post

Grazie
Ultima modifica di duns il giovedì 7 dicembre 2017, 20:45, modificato 4 volte in totale.
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

da notare che Label=condivisa identifica tale partizione ntfs, tant'è che i comandi

Codice: Seleziona tutto

duns@duns-neos:~$ sudo umount LABEL=condivisa
[sudo] password for duns: 
duns@duns-neos:~$ sudo mount LABEL=condivisa
duns@duns-neos:~$ 
hanno successo.
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

Pare che la questione della partizione ntfs possa risolversi così:

Codice: Seleziona tutto

LABEL=condivisa	/mnt/condivisa	ntfs-3g	defaults,user,exec,rw,auto,locale=en_US.UTF-8	0	0
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

Mi correggo: il problema della partizione non montata NON è risolto: oggi me l'ha fatto ancora.
E quento all'altro problema: non capisco se sia ibernazione o uno "sloggamento", so che premendo alt+stamp+r e alt+stamp+e mi ritrovo con la schermata di login, ma le applicazioni sono state chiuse "violentemente". :sisi:
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

Ieri sera ho fatto una prova: settare il suspend dopo un certo numero di minuti. La cosa funziona, nel senso che premendo il tasto di accensione in due secondi il pc riparte, ma così non va per tutto il tempo della sospensione, per esempio, amule.

Allora ho sto facendo un'altra prova: prima di allontanarmi dal pc chiudo tutti i programmi diversi da quelli della systray, cioè chiudo per esempio firefox, qupzilla e thunderbird, ma non amule e qtox. E sembra che la cosa funzioni.
Ma è un espediente. Spero che la Canonical corregga il problema alla radice, anche se non è "critical".
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

Penso il problema dei crash sia in firefox.
Anche se forse c'entra anche amule. Cito da .xsession-errors:
KCrash: crashing... crashRecursionCounter = 2
KCrash: Application Name = ksmserver path = /usr/bin pid = 1564
KCrash: Arguments: /usr/bin/ksmserver
KCrash: Attempting to start /usr/lib/x86_64-linux-gnu/libexec/drkonqi from kdeinit
Warning: connect() failed: : Connection refused
KCrash: Attempting to start /usr/lib/x86_64-linux-gnu/libexec/drkonqi directly
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*

--------------------------------------------------------------------------------
A fatal error has occurred and aMule has crashed.
Please assist us in fixing this problem by posting the backtrace below in our
'aMule Crashes' forum and include as much information as possible regarding the
circumstances of this crash. The forum is located here:
http://forum.amule.org/index.php?board=67.0
If possible, please try to generate a real backtrace of this crash:
http://wiki.amule.org/wiki/Backtraces

----------------------------=| BACKTRACE FOLLOWS: |=----------------------------
Current version is: aMule 2.3.2 compiled with wxGTK2 v3.0.2 and Boost 1.62
Running on: Linux 4.13.0-16-generic x86_64

[2] ?? in /usr/lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0[0x7fd3a150c27c]
[3] ?? in /lib/x86_64-linux-gnu/libpthread.so.0[0x7fd3a061f150]
[4] ?? in amule[0x557a2d001b36]
[5] ?? in amule[0x557a2d006da8]
[6] ?? in amule[0x557a2d00ae8a]
[7] wxThread::CallEntry() in /usr/lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0[0x7fd3a1506a12]
[8] ?? in /usr/lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0[0x7fd3a150880c]
[9] ?? in /lib/x86_64-linux-gnu/libpthread.so.0[0x7fd3a06137fc]
[10] clone in /lib/x86_64-linux-gnu/libc.so.6[0x7fd3a0340b0f]

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
A fatal error has occurred and aMule has crashed.
Please assist us in fixing this problem by posting the backtrace below in our
'aMule Crashes' forum and include as much information as possible regarding the
circumstances of this crash. The forum is located here:
http://forum.amule.org/index.php?board=67.0
If possible, please try to generate a real backtrace of this crash:
http://wiki.amule.org/wiki/Backtraces

----------------------------=| BACKTRACE FOLLOWS: |=----------------------------
Current version is: aMule 2.3.2 compiled with wxGTK2 v3.0.2 and Boost 1.62
Running on: Linux 4.13.0-16-generic x86_64

[2] ?? in /usr/lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0[0x7fd3a150c27c]
[3] ?? in /lib/x86_64-linux-gnu/libpthread.so.0[0x7fd3a061f150]
[4] ?? in [0x7fd3700019e0]
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

Sono sempre più convinto che il problema sia firefox: manda in crash il sistema. :cry: Idee?
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

Provo a disabilitare le ultime estensioni di Firefox.
Intanto credo di poter dire che i due problemi che ho segnalato in questo thread sono connessi: la mancata montatura della partizione NTFS consegue il logout "violento" con alt+stamp+e, dovuto al crash.
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

No, anche avendo chiuso firefox, il sistema va in "mini-crash", mini nel senso che per uscirne non occorre un reset, ma basta un logout (violento: con alt+stamp+r e alt+stamp+e).
Poco fa sono tornato, dopo mezz'ora al PC, muovendo il mouse è venuta fuori la schermata dello screensaver, ho digitato la password e mi è apparso lo schermo nero con visibile il mouse; allora ho prmuto alt+tab e mi apparivano le finestre dei programmi aperti, come pure premendo ctrl+esc mi appariva regolarmente la finestrella del system monitor. ma non si vedeva il desktop né la barra in basso (ho KDE), solo nero. Allora ho dovuto rassegnarmi a un logout violento (dopo il quale come sempre la partizione ntfs non viene montata automaticamente). :muro:
Mi potete dare una mano?
Grazie
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

Ho seguito quanto detto qui, eliminando .Xauthority dalla home.
Per un po' funziona. Ma poi no, c'è ancora stato un mini-crash e stavolta (avevo lasciato aperto firefox) più grave: nessuna risposta a mouse e tastiera. Logout violento e nuovo login. :muro:
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

L'altro ieri ho dato, da home/.config il comando

Codice: Seleziona tutto

mv plasma*  ../
e al momento mi ha fatto arrabbiare perché mi ha cancellato un po' di configurazioni plasma, ma poi sembra che abbia risolto il problema. Appena ne avrò la certezza metterò "risolto". :)
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: problemi dopo aggiornamento a (kubuntu) 17.10

Messaggio da duns »

Si ripetono i crash. Sulla nuova istallazione mi viene detto di istallare driver proprietari, ma graficamente la cosa non riesce allora faccio quanto segue, da terminale.

EDIT [3 nov 2017]

Per cui ho dato il comando

Codice: Seleziona tutto

sudo ubuntu-drivers autoinstall 
Ecco il messaggio da terminale:

Codice: Seleziona tutto

The following NEW packages will be installed:
  intel-microcode iucode-tool
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 1.026 kB of archives.
After this operation, 1.290 kB of additional disk space will be used.
Get:1 http://it.archive.ubuntu.com/ubuntu artful/restricted amd64 iucode-tool amd64 2.1.2-2 [38,9 kB]
Get:2 http://it.archive.ubuntu.com/ubuntu artful/restricted amd64 intel-microcode amd64 3.20170707.1 [987 kB]
Fetched 1.026 kB in 3s (315 kB/s)        
Selecting previously unselected package iucode-tool.
(Reading database ... 363177 files and directories currently installed.)
Preparing to unpack .../iucode-tool_2.1.2-2_amd64.deb ...
Unpacking iucode-tool (2.1.2-2) ...
Selecting previously unselected package intel-microcode.
Preparing to unpack .../intel-microcode_3.20170707.1_amd64.deb ...
Unpacking intel-microcode (3.20170707.1) ...
Setting up iucode-tool (2.1.2-2) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up intel-microcode (3.20170707.1) ...
update-initramfs: deferring update (trigger activated)
intel-microcode: microcode will be updated at next boot
Processing triggers for initramfs-tools (0.125ubuntu12) ...
update-initramfs: Generating /boot/initrd.img-4.13.0-16-generic
Adesso faccio un reset e vediamo se funziona.

EDIT

No, non ha funzionato: ancora minicrash. Anche amule ha messo di funzionare durante tale minicrash.

EDIT [3 nov 2017 - 20.41]
Ho cercato in .xsession-errors i casi in cui compare la scritta warning e li ho trascritti (eliminando il più possibile le ripetizioni). Eccoli:

Codice: Seleziona tutto

KCrash: crashing... crashRecursionCounter = 2
KCrash: Application Name = ksmserver path = /usr/bin pid = 1119
KCrash: Arguments: /usr/bin/ksmserver 
KCrash: Attempting to start /usr/lib/x86_64-linux-gnu/libexec/drkonqi from kdeinit
Warning: connect() failed: : Connection refused
KCrash: Attempting to start /usr/lib/x86_64-linux-gnu/libexec/drkonqi directly

[12:46:19.179 UTC] :0 : Warning: env says KDE is running but SNI unavailable -- check KDE_FULL_SESSION and XDG_CURRENT_DESKTOP
[12:46:20.424 UTC] :0 : Warning: The X11 connection broke (error 1). Did the X11 server die?

Xsession: X session started for duns at ven  3 nov 2017, 13.46.28, CET
localuser:duns being added to access control list
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: warning: error sending to systemd: org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.freedesktop.systemd1 exited with status 1

dbus-update-activation-environment: warning: error sending to systemd: org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.freedesktop.systemd1 exited with status 1
startkde: Starting up...
dbus-update-activation-environment: warning: error sending to systemd: org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.freedesktop.systemd1 exited with status 1

WARNING: Cannot find style "org.kde.desktop" - fallback: "/usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/Styles/Desktop"

WARNING: Cannot find style "org.kde.desktop" - fallback: "/usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/Styles/Desktop"

(kerneloops-applet:3870): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
(kerneloops-applet:3870): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",

(amule:3970): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
(amule:3970): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",

[3973] WARNING: pipe error (143): Connection reset by peer: file /build/firefox-9cfKiA/firefox-56.0+build6/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 353
(/usr/lib/firefox/plugin-container:4402): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
(/usr/lib/firefox/plugin-container:4402): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",

(amule:3970): Gdk-WARNING **: GdkWindow 0xa0018b unexpectedly destroyed
QXcbConnection: XCB error: 3 (BadWindow), sequence: 40114, resource id: 52428867, major code: 18 (ChangeProperty), minor code: 0
QXcbConnection: XCB error: 3 (BadWindow), sequence: 40480, resource id: 46137354, major code: 18 (ChangeProperty), minor code: 0
QXcbConnection: XCB error: 3 (BadWindow), sequence: 40484, resource id: 37748740, major code: 18 (ChangeProperty), minor code: 0

(amule:3970): Gtk-CRITICAL **: IA__gtk_image_set_from_pixbuf: assertion 'GTK_IS_IMAGE (image)' failed
(amule:3970): Gtk-CRITICAL **: IA__gtk_widget_set_tooltip_text: assertion 'GTK_IS_WIDGET (widget)' failed
The program 'amule' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadWindow (invalid Window parameter)'.

(amule:1704): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
(amule:1704): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",

KCrash: crashing... crashRecursionCounter = 2
KCrash: Application Name = ksmserver path = /usr/bin pid = 1205
KCrash: Arguments: /usr/bin/ksmserver 
KCrash: Attempting to start /usr/lib/x86_64-linux-gnu/libexec/drkonqi from kdeinit
Warning: connect() failed: : Connection refused
KCrash: Attempting to start /usr/lib/x86_64-linux-gnu/libexec/drkonqi directly
KCrash: Attempting to start /usr/bin/kdeinit5 from kdeinit
Warning: connect() failed: : Connection refused
KCrash: Attempting to start /usr/bin/kdeinit5 directly
KCrash: crashing... crashRecursionCounter = 2
KCrash: Application Name = kdeinit5 path = /usr/bin pid = 1186
KCrash: Arguments: /usr/bin/kdeinit5 
KCrash: Attempting to start /usr/lib/x86_64-linux-gnu/libexec/drkonqi from kdeinit
Warning: connect() failed: : Connection refused
KCrash: Attempting to start /usr/lib/x86_64-linux-gnu/libexec/drkonqi directly
kdeinit5: preparing to launch '/usr/lib/x86_64-linux-gnu/libexec/kf5/klauncher'
kdeinit5: Launched KLauncher, pid = 2458, result = 0
amule: Fatal IO error 0 (Success) on X server :0.
QXcbConnection: Could not connect to display :0
QXcbConnection: Could not connect to display :0
QXcbConnection: Could not connect to display :0
Unable to start Dr. Konqi
Re-raising signal for core dump handling.
kdeinit5: Communication error with launcher. Exiting!
Unable to start Dr. Konqi
Re-raising signal for core dump handling.

--------------------------------------------------------------------------------
A fatal error has occurred and aMule has crashed.
Aggiungo delle info sul mio hardware

Codice: Seleziona tutto

"duns@duns-novissimum:~$ sudo lshw
[sudo] password for duns: 
duns-novissimum             
    description: Desktop Computer
    product: MS-7A74 (Default string)
    vendor: MSI
    version: 1.0
    serial: Default string
    width: 64 bits
    capabilities: smbios-3.0 dmi-3.0 smp vsyscall32
    configuration: boot=normal chassis=desktop family=Default string sku=Default string uuid=00000000-0000-0000-0000-4CCC6AD8709F
  *-core
       description: Motherboard
       product: B250M PRO-VD (MS-7A74)
       vendor: MSI
       physical id: 0
       version: 1.0
       serial: H216419196
       slot: Default string
     *-firmware
          description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: 1.20
          date: 12/02/2016
          size: 64KiB
          capacity: 8128KiB
          capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-memory
          description: System Memory
          physical id: 3c
          slot: System board or motherboard
          size: 8GiB
        *-bank:0
             description: [empty]
             physical id: 0
             slot: ChannelA-DIMM0
        *-bank:1
             description: [empty]
             physical id: 1
             slot: ChannelA-DIMM1
        *-bank:2
             description: DIMM DDR4 Synchronous 2400 MHz (0,4 ns)
             product: PSD48G240082
             vendor: 8502
             physical id: 2
             serial: 00000000
             slot: ChannelB-DIMM0
             size: 8GiB
             width: 64 bits
             clock: 2400MHz (0.4ns)
        *-bank:3
             description: [empty]
             physical id: 3
             slot: ChannelB-DIMM1
     *-cache:0
          description: L1 cache
          physical id: 42
          slot: L1 Cache
          size: 128KiB
          capacity: 128KiB
          capabilities: synchronous internal write-back unified
          configuration: level=1
     *-cache:1
          description: L2 cache
          physical id: 43
          slot: L2 Cache
          size: 512KiB
          capacity: 512KiB
          capabilities: synchronous internal write-back unified
          configuration: level=2
     *-cache:2
          description: L3 cache
          physical id: 44
          slot: L3 Cache
          size: 3MiB
          capacity: 3MiB
          capabilities: synchronous internal write-back unified
          configuration: level=3
     *-cpu
          description: CPU
          product: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz
          vendor: Intel Corp.
          physical id: 45
          bus info: cpu@0
          version: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz
          serial: To Be Filled By O.E.M.
          slot: U3E1
          size: 1200MHz
          capacity: 4005MHz
          width: 64 bits
          clock: 100MHz
          capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 xsaves dtherm arat pln pts hwp hwp_notify hwp_act_window hwp_epp cpufreq
          configuration: cores=2 enabledcores=2 threads=4
     *-pci
          description: Host bridge
          product: Intel Corporation
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 06
          width: 32 bits
          clock: 33MHz
        *-display
             description: VGA compatible controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 04
             width: 64 bits
             clock: 33MHz
             capabilities: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:123 memory:de000000-deffffff memory:c0000000-cfffffff ioport:f000(size=64) memory:c0000-dffff
        *-generic:0 UNCLAIMED
             description: System peripheral
             product: Skylake Gaussian Mixture Model
             vendor: Intel Corporation
             physical id: 8
             bus info: pci@0000:00:08.0
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: msi pm bus_master cap_list
             configuration: latency=0
             resources: memory:df12f000-df12ffff
        *-usb
             description: USB controller
             product: 200 Series PCH USB 3.0 xHCI Controller
             vendor: Intel Corporation
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             resources: irq:120 memory:df110000-df11ffff
           *-usbhost:0
                product: xHCI Host Controller
                vendor: Linux 4.13.0-16-generic xhci-hcd
                physical id: 0
                bus info: usb@1
                logical name: usb1
                version: 4.13
                capabilities: usb-2.00
                configuration: driver=hub slots=12 speed=480Mbit/s
              *-usb:0
                   description: Mouse
                   product: USB Optical Mouse
                   vendor: PixArt
                   physical id: 3
                   bus info: usb@1:3
                   version: 1.00
                   capabilities: usb-2.00
                   configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
              *-usb:1
                   description: Keyboard
                   product: USB Keyboard
                   vendor: Logitech
                   physical id: 4
                   bus info: usb@1:4
                   version: 64.00
                   capabilities: usb-1.10
                   configuration: driver=usbhid maxpower=90mA speed=1Mbit/s
              *-usb:2
                   description: Modem
                   product: SAMSUNG_Android
                   vendor: SAMSUNG
                   physical id: 5
                   bus info: usb@1:5
                   version: 4.00
                   serial: 364e30260a22503a
                   capabilities: usb-2.00 atcommands
                   configuration: driver=cdc_acm maxpower=500mA speed=480Mbit/s
              *-usb:3
                   description: Generic USB device
                   product: USB WLAN
                   vendor: 802.11n
                   physical id: 6
                   bus info: usb@1:6
                   version: 2.00
                   serial: 00e04c000001
                   capabilities: usb-2.00
                   configuration: driver=rtl8192cu maxpower=500mA speed=480Mbit/s
              *-usb:4
                   description: Mass storage device
                   product: Cruzer Fit
                   vendor: SanDisk
                   physical id: 7
                   bus info: usb@1:7
                   logical name: scsi6
                   version: 1.27
                   serial: 4C530006050920107423
                   capabilities: usb-2.00 scsi emulated scsi-host
                   configuration: driver=usb-storage maxpower=200mA speed=480Mbit/s
                 *-disk
                      description: SCSI Disk
                      product: Cruzer Fit
                      vendor: SanDisk
                      physical id: 0.0.0
                      bus info: scsi@6:0.0.0
                      logical name: /dev/sdc
                      version: 1.27
                      serial: 4C530006050920107423
                      size: 7633MiB (8004MB)
                      capabilities: removable
                      configuration: ansiversion=6 logicalsectorsize=512 sectorsize=512
                    *-medium
                         physical id: 0
                         logical name: /dev/sdc
                         size: 7633MiB (8004MB)
                         capabilities: partitioned partitioned:dos
                         configuration: signature=0009c02f
                       *-volume:0
                            description: Windows NTFS volume
                            physical id: 1
                            logical name: /dev/sdc1
                            version: 3.1
                            serial: 70a1-0761
                            size: 3396MiB
                            capacity: 3396MiB
                            capabilities: primary ntfs initialized
                            configuration: clustersize=4096 created=2016-06-07 17:37:19 filesystem=ntfs label=4giga state=clean
                       *-volume:1
                            description: Extended partition
                            physical id: 2
                            logical name: /dev/sdc2
                            size: 4226MiB
                            capacity: 4226MiB
                            capabilities: primary extended partitioned partitioned:extended
                          *-logicalvolume
                               description: EXT4 volume
                               vendor: Linux
                               physical id: 5
                               logical name: /dev/sdc5
                               version: 1.0
                               serial: efce76d0-a633-436c-a1a6-d7a52f5cc56e
                               size: 4226MiB
                               capacity: 4226MiB
                               capabilities: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
                               configuration: created=2017-05-06 16:46:02 filesystem=ext4 label=neo-dati lastmountpoint=/media/duns/neo-dati modified=2017-11-02 21:33:15 mounted=2017-11-02 19:52:46 state=unknown
              *-usb:5
                   description: Mass storage device
                   product: Mass Storage Device
                   vendor: Generic
                   physical id: 8
                   bus info: usb@1:8
                   logical name: scsi7
                   version: 1.00
                   serial: 00000000000006
                   capabilities: usb-2.00 scsi emulated scsi-host
                   configuration: driver=usb-storage maxpower=100mA speed=480Mbit/s
                 *-disk
                      description: SCSI Disk
                      product: Storage Device
                      vendor: Generic
                      physical id: 0.0.0
                      bus info: scsi@7:0.0.0
                      logical name: /dev/sdd
                      version: 0.00
                      capabilities: removable
                      configuration: ansiversion=2 logicalsectorsize=512 sectorsize=512
                    *-medium
                         physical id: 0
                         logical name: /dev/sdd
              *-usb:6
                   description: Video
                   product: USB 2.0 Camera
                   vendor: Sonix Technology Co., Ltd.
                   physical id: a
                   bus info: usb@1:a
                   version: 1.00
                   capabilities: usb-2.00
                   configuration: driver=uvcvideo maxpower=98mA speed=480Mbit/s
           *-usbhost:1
                product: xHCI Host Controller
                vendor: Linux 4.13.0-16-generic xhci-hcd
                physical id: 1
                bus info: usb@2
                logical name: usb2
                version: 4.13
                capabilities: usb-3.00
                configuration: driver=hub slots=6 speed=5000Mbit/s
        *-generic:1 UNCLAIMED
             description: Signal processing controller
             product: 200 Series PCH Thermal Subsystem
             vendor: Intel Corporation
             physical id: 14.2
             bus info: pci@0000:00:14.2
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: latency=0
             resources: memory:df12e000-df12efff
        *-communication
             description: Communication controller
             product: 200 Series PCH CSME HECI #1
             vendor: Intel Corporation
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             resources: irq:124 memory:df12d000-df12dfff
        *-storage
             description: SATA controller
             product: 200 Series PCH SATA controller [AHCI mode]
             vendor: Intel Corporation
             physical id: 17
             bus info: pci@0000:00:17.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:121 memory:df128000-df129fff memory:df12c000-df12c0ff ioport:f090(size=8) ioport:f080(size=4) ioport:f060(size=32) memory:df12b000-df12b7ff
        *-pci
             description: PCI bridge
             product: 200 Series PCH PCI Express Root Port #7
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: f0
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:18 ioport:e000(size=4096) memory:df000000-df0fffff
           *-network
                description: Ethernet interface
                product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:01:00.0
                logical name: enp1s0
                version: 15
                serial: 4c:cc:6a:d8:70:9f
                size: 100Mbit/s
                capacity: 1Gbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.1.100 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
                resources: irq:122 ioport:e000(size=256) memory:df004000-df004fff memory:df000000-df003fff
        *-isa
             description: ISA bridge
             product: 200 Series PCH LPC Controller (B250)
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-memory UNCLAIMED
             description: Memory controller
             product: 200 Series PCH PMC
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 00
             width: 32 bits
             clock: 33MHz (30.3ns)
             capabilities: bus_master
             configuration: latency=0
             resources: memory:df124000-df127fff
        *-multimedia
             description: Audio device
             product: 200 Series PCH HD Audio
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             resources: irq:125 memory:df120000-df123fff memory:df100000-df10ffff
        *-serial UNCLAIMED
             description: SMBus
             product: 200 Series PCH SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.4
             bus info: pci@0000:00:1f.4
             version: 00
             width: 64 bits
             clock: 33MHz
             configuration: latency=0
             resources: memory:df12a000-df12a0ff ioport:f040(size=32)
     *-scsi:0
          physical id: 1
          logical name: scsi0
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: KINGSTON SHFS37A
             physical id: 0.0.0
             bus info: scsi@0:0.0.0
             logical name: /dev/sda
             version: BBF0
             serial: 50026B7773008927
             size: 111GiB (120GB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=48a2edfb
           *-volume:0
                description: Windows NTFS volume
                physical id: 1
                bus info: scsi@0:0.0.0,1
                logical name: /dev/sda1
                version: 3.1
                serial: e6f0-1229
                size: 498MiB
                capacity: 500MiB
                capabilities: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2017-07-01 17:58:53 filesystem=ntfs label=Riservato per il sistema modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
           *-volume:1
                description: Windows NTFS volume
                physical id: 2
                bus info: scsi@0:0.0.0,2
                logical name: /dev/sda2
                version: 3.1
                serial: faa9b955-76b0-3642-96fb-492243f532a9
                size: 42GiB
                capacity: 42GiB
                capabilities: primary ntfs initialized
                configuration: clustersize=4096 created=2017-07-01 17:59:28 filesystem=ntfs state=clean
           *-volume:2
                description: EXT4 volume
                vendor: Linux
                physical id: 3
                bus info: scsi@0:0.0.0,3
                logical name: /dev/sda3
                version: 1.0
                serial: 94ffcd90-e9a9-4431-8801-f3dfb83004a1
                size: 35GiB
                capacity: 35GiB
                capabilities: primary journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
                configuration: created=2017-07-04 19:28:04 filesystem=ext4 lastmountpoint=/media/duns/94ffcd90-e9a9-4431-8801-f3dfb83004a1 modified=2017-11-02 18:52:23 mounted=2017-11-02 16:38:14 state=clean
           *-volume:3
                description: EXT4 volume
                vendor: Linux
                physical id: 4
                bus info: scsi@0:0.0.0,4
                logical name: /dev/sda4
                logical name: /
                version: 1.0
                serial: 342bde2d-dcb7-474e-9a05-248f12665c12
                size: 33GiB
                capacity: 33GiB
                capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                configuration: created=2017-11-01 16:19:00 filesystem=ext4 lastmountpoint=/ modified=2017-11-03 07:05:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2017-11-03 07:05:22 state=mounted
     *-scsi:1
          physical id: 2
          logical name: scsi1
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: ST1000DM010-2EP1
             vendor: Seagate
             physical id: 0.0.0
             bus info: scsi@1:0.0.0
             logical name: /dev/sdb
             version: CC43
             serial: Z9A9KJ9Q
             size: 931GiB (1TB)
             capabilities: gpt-1.00 partitioned partitioned:gpt
             configuration: ansiversion=5 guid=592bd6f8-5d87-4446-8ca7-46605d9b38b9 logicalsectorsize=512 sectorsize=4096
           *-volume:0
                description: Windows NTFS volume
                vendor: Windows
                physical id: 1
                bus info: scsi@1:0.0.0,1
                logical name: /dev/sdb1
                logical name: /mnt/condivisa
                version: 3.1
                serial: 1a961a5e-64b5-bc4e-b2cf-6dbb6a0e1812
                size: 50GiB
                capacity: 50GiB
                capabilities: ntfs initialized
                configuration: clustersize=4096 created=2017-07-04 22:23:26 filesystem=ntfs label=condivisa mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
           *-volume:1
                description: EXT4 volume
                vendor: Linux
                physical id: 2
                bus info: scsi@1:0.0.0,2
                logical name: /dev/sdb2
                logical name: /mnt/dati
                version: 1.0
                serial: 5e8b182e-a05e-46fb-a8fa-08eb498ffe06
                size: 10GiB
                capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                configuration: created=2017-07-04 22:23:28 filesystem=ext4 label=dati lastmountpoint=/mnt/dati modified=2017-11-03 07:05:22 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2017-11-03 07:05:22 state=mounted
           *-volume:2
                description: EXT4 volume
                vendor: Linux
                physical id: 3
                bus info: scsi@1:0.0.0,3
                logical name: /dev/sdb3
                logical name: /mnt/settings
                version: 1.0
                serial: 5c91e4f6-a7ee-4a74-8c7d-8ea391a4cac3
                size: 2009MiB
                capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                configuration: created=2017-07-04 22:23:30 filesystem=ext4 label=settings lastmountpoint=/mnt/settings modified=2017-11-03 07:05:23 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2017-11-03 07:05:23 state=mounted
           *-volume:3
                description: EXT4 volume
                vendor: Linux
                physical id: 4
                bus info: scsi@1:0.0.0,4
                logical name: /dev/sdb4
                logical name: /mnt/programs
                version: 1.0
                serial: 7b250ce3-15f4-42b5-9fed-5f42184da3c2
                size: 3090MiB
                capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                configuration: created=2017-07-04 22:23:31 filesystem=ext4 label=programs lastmountpoint=/mnt/programs modified=2017-11-03 07:05:23 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2017-11-03 07:05:23 state=mounted
           *-volume:4
                description: EXT4 volume
                vendor: Linux
                physical id: 5
                bus info: scsi@1:0.0.0,5
                logical name: /dev/sdb5
                logical name: /mnt/zippati
                version: 1.0
                serial: a919f450-1e32-41fa-887c-dca44efcb8ab
                size: 10GiB
                capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                configuration: created=2017-07-04 22:23:33 filesystem=ext4 label=zippati lastmountpoint=/mnt/zippati modified=2017-11-03 07:05:23 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2017-11-03 07:05:23 state=mounted
           *-volume:5
                description: EXT4 volume
                vendor: Linux
                physical id: 6
                bus info: scsi@1:0.0.0,6
                logical name: /dev/sdb6
                logical name: /mnt/musica
                version: 1.0
                serial: 2692905f-1773-4aa0-8bd2-f24795f3159a
                size: 43GiB
                capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                configuration: created=2017-07-04 22:23:35 filesystem=ext4 label=musica lastmountpoint=/mnt/musica modified=2017-11-03 07:05:23 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2017-11-03 07:05:23 state=mounted
           *-volume:6
                description: EXT4 volume
                vendor: Linux
                physical id: 7
                bus info: scsi@1:0.0.0,7
                logical name: /dev/sdb7
                logical name: /mnt/video
                version: 1.0
                serial: d70838f5-9690-4740-8cd9-1c648cf60c83
                size: 801GiB
                capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                configuration: created=2017-07-04 22:23:38 filesystem=ext4 label=video lastmountpoint=/mnt/video modified=2017-11-03 07:05:23 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2017-11-03 07:05:23 state=mounted
           *-volume:7
                description: Linux swap volume
                vendor: Linux
                physical id: 8
                bus info: scsi@1:0.0.0,8
                logical name: /dev/sdb8
                version: 1
                serial: c01f6820-2e26-495a-8f6a-f639209e64b3
                size: 2999MiB
                capacity: 2999MiB
                capabilities: nofs swap initialized
                configuration: filesystem=swap pagesize=4095
     *-scsi:2
          physical id: 3
          logical name: scsi2
          capabilities: emulated
        *-cdrom
             description: DVD-RAM writer
             product: DVDRAM GH24NSD1
             vendor: HL-DT-ST
             physical id: 0.0.0
             bus info: scsi@2:0.0.0
             logical name: /dev/cdrom
             logical name: /dev/cdrw
             logical name: /dev/dvd
             logical name: /dev/dvdrw
             logical name: /dev/sr0
             version: LB00
             capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
  *-power UNCLAIMED
       description: To Be Filled By O.E.M.
       product: To Be Filled By O.E.M.
       vendor: To Be Filled By O.E.M.
       physical id: 1
       version: To Be Filled By O.E.M.
       serial: To Be Filled By O.E.M.
       capacity: 32768mWh
  *-network
       description: Wireless interface
       physical id: 2
       bus info: usb@1:6
       logical name: wlxc46e1f288735
       serial: c4:6e:1f:28:87:35
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8192cu driverversion=4.13.0-16-generic firmware=N/A ip=192.168.1.101 link=yes multicast=yes wireless=IEEE 802.11"
EDIT [4 nov 2017]
Oggi ho provato a vedere se la causa dei crash è amule, e ho lasciato per 6 ore accesso il PC senza amule. Ma è andato in crash lo stesso.

EDIT [4 nov 2017 sera]
Stesso comportamento su altro PC, aggiornato da Kubuntu 17.04 (dove andava tutto bene) a Kubuntu 17.10: crash durante periodi di inattività del PC. E si tratta di diverso hardware (HD non SSD, 1tb, microprocessore non Intel ma Amd, per esempio).
Quello che mi stupisce è che nessun altro utente di Kubuntu dica niente: capita solo a me?
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: crash dopo aggiornamento a 17.10, se inattivo per un po'

Messaggio da duns »

Ho provato a chiedere aiuto al forum internazionale. Se anche lì non riceverò risposta si può fare un downgrade alla 17.04?
Grazie
Avatar utente
trekfan1
Moderatore Globale
Moderatore Globale
Messaggi: 23525
Iscrizione: domenica 21 maggio 2006, 10:51
Desktop: Gnome
Distribuzione: Ubuntu 23.10 e 24.04 (dev)
Sesso: Maschile
Località: Formigine (MO) | Accecante Asceta

Re: crash dopo aggiornamento a 17.10, se inattivo per un po'

Messaggio da trekfan1 »

Devi reinstallare se vuoi tornare indietro ma in questo caso meglio se torni alla 16.04 dato che il supporto della 17.04 terminerà a gennaio 2018
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: crash dopo aggiornamento a 17.10, se inattivo per un po'

Messaggio da duns »

Grazie. Qualche suggerimento per risolvere il problema dei crash? Vedo peraltro che capitano anche in pclinuxos, anche se meno frequentemente...
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: crash dopo aggiornamento a 17.10, se inattivo per un po'

Messaggio da duns »

Ci sono delle novità: lo stesso problema dei crash l'ho anche con PcLinuxOs e con Neon, sulla stessa macchina. Per questo ho postato sul forum di KDE Neon, in quanto il problema mi pareva fosse di KDE.
Sono arrivato alla conclusione che si tratta di un problema di scheda grafica Intel, che non ha ancora i driver per la 17.10 e del kernel.
Ho fatto 4 cose:
1) creato il file 20-intel.conf nella cartella, che ho pure creato /etc/X11/xorg.conf.d, e dentro vi ho scritto le seguenti linee

Codice: Seleziona tutto

Section "Device"
  Identifier  "Intel Graphics"
  #Driver  "intel"
  Driver "modesetting"
  Option "TearFree" "true"
  Option "DRI"	"false"
  Option "NoAccel" "True"
  Option "Backlight" "intel_backlight"
EndSection
2) Ho aggiunto al file grub in /etc/default le seguenti espressioni

Codice: Seleziona tutto

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.enable_rc6=0 i915.enable_fbc=1 i915.lvds_downclock=1 i915.semaphores=1 i915.enable_execlists=0"
3) Ho provato a cambiare vari kernel: 4.10, 4.12, 4.13 e 4.14. I peggiori sono stati il 4.12, il 4.13 e il 4.14, miglioramenti ne ho notati col 4.10. Non sono riuscito a installare con ukuu il 3.12, che aveo trovato su un forum come risolutivo.

4) Ho disabilitato nel BIOS l'hyperthreading.

Situazione attuale
In sostanza in questo momento ho a) dei crash mentre uso il PC (rari, e che risolvo con alt+stamp+r e alt+stamp+e), b) dei crash mentre il PC è inattivo per tempi piuttosto lunghi, per lo più non dei veri crash totali, nel senso che c'è lo schermo nero senza desktop, ma posso richiamare le finestre dei programmi attivi (con alt+tab) e lavorarvi tranquillamente, come anche internet rimane attivo. Anche qui risolvo con alt+stamp+r e alt+stamp+e oppure premo leggermente il tasto di accensione e ho il logout regolare.

Ricordo la mia situazione hw e sw:

Codice: Seleziona tutto

duns@duns-neos:~$ inxi -F
System:    Host: duns-neos Kernel: 4.10.0-041000-generic x86_64 bits: 64 Desktop: KDE Plasma 5.10.5
           Distro: Ubuntu 17.10
Machine:   Device: desktop Mobo: MSI model: B250M PRO-VD (MS-7A74) v: 1.0 serial: N/A
           UEFI [Legacy]: American Megatrends v: 1.20 date: 12/02/2016
CPU:       Dual core Intel Core i3-7100 (-MCP-) cache: 3072 KB
           clock speeds: max: 3900 MHz 1: 2755 MHz 2: 3805 MHz
Graphics:  Card: Intel HD Graphics 630
           Display Server: x11 (X.Org 1.19.5 ) driver: modesetting Resolution: 1280x1024@60.02hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 630 (Kaby Lake GT2) version: 4.5 Mesa 17.2.2
Audio:     Card Intel 200 Series PCH HD Audio driver: snd_hda_intel Sound: ALSA v: k4.10.0-041000-generic
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: enp1s0 state: up speed: 100 Mbps duplex: full mac: 4c:cc:6a:d8:70:9f
Drives:    HDD Total Size: 1129.2GB (54.8% used)
           ID-1: /dev/sda model: KINGSTON_SHFS37A size: 120.0GB
           ID-2: /dev/sdb model: ST1000DM010 size: 1000.2GB
           ID-3: USB /dev/sdd model: Cruzer_Fit size: 8.0GB
           ID-4: USB /dev/sde model: DataTraveler_2.0 size: 1.0GB
Partition: ID-1: / size: 35G used: 18G (54%) fs: ext4 dev: /dev/sda3
           ID-2: swap-1 size: 3.15GB used: 0.00GB (0%) fs: swap dev: /dev/sdb8
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 245 Uptime: 3 min Memory: 1316.2/7874.6MB Client: Shell (bash) inxi: 2.3.37 
Credo che la soluzione verrà quando la Intel rilascerà dei driver per (k)ubuntu 17.10. O avete delle dritte da darmi?
Grazie
Avatar utente
duns
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 629
Iscrizione: domenica 5 febbraio 2006, 15:28
Desktop: KDE plasma5
Distribuzione: Kubuntu 20.04 e KDE Neon
Sesso: Maschile

Re: crash dopo aggiornamento a 17.10, se inattivo per un po'

Messaggio da duns »

Sembra che la cosa si stia risolvendo con la creazione di un nuovo utente. Vi farò sapere.
EDIT
Sì, ho fatto diverse prove, anche lasciando acceso il PC per 8 ore inattivo non va in crash. Credo che ciò sia dovuto: 1) alle modifiche di cui ho sopra parlato e 2) alla creazione di un nuovo utente (c'era qualcosa nell'utente duns che provocava i crash, la cosa strana è che li provocava in tre diversi so sul medesimo PC, di cui uno, Neon, assolutamente nuovo: mah, non capisco).
Scrivi risposta

Ritorna a “Installazione e aggiornamento del sistema operativo”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 2 ospiti