Perché il teoria una vulnerabilità di ff potrebbe essere all'origine del problema. Che versione hai?Maurizio.M ha scritto: questa volta stavo usando firefox, ma nn c'è qualcosa di preciso....quando gli gira compaiono
il .exe ha sempre nomi strani e sempre diversi (sembrano creati random...sembrano...) l'altro è sempre un file vuoto ed ha sempre lo stesso nome
Codice: Seleziona tutto
Starting Nmap 4.62 ( http://nmap.org ) at 2009-01-16 20:53 CET
Interesting ports on localhost (127.0.0.1):
Not shown: 1711 closed ports
PORT STATE SERVICE
21/tcp open ftp
139/tcp open netbios-ssn
445/tcp open microsoft-ds
631/tcp open ipp
Nmap done: 1 IP address (1 host up) scanned in 0.137 seconds
Codice: Seleziona tutto
21/tcp open ftpCodice: Seleziona tutto
139/tcp open netbios-ssn
445/tcp open microsoft-ds
Codice: Seleziona tutto
ServerType standalone
DefaultServer on
Umask 022
ServerName "0.0.0.0"
ServerIdent on "My FTPD"
ServerAdmin Admin@this.domain.topdomain
IdentLookups off
UseReverseDNS off
Port 21
PassivePorts 49152 65534
#MasqueradeAddress None
TimesGMT off
MaxInstances 30
MaxLoginAttempts 3
TimeoutLogin 300
TimeoutNoTransfer 120
TimeoutIdle 120
DisplayLogin welcome.msg
User nobody
Group nobody
DirFakeUser off nobody
DirFakeGroup off nobody
DefaultTransferMode binary
AllowForeignAddress off
AllowRetrieveRestart on
AllowStoreRestart on
DeleteAbortedStores off
TransferRate RETR 30
TransferRate STOR 40
TransferRate STOU 40
TransferRate APPE 40
SystemLog /var/log/secure
RequireValidShell off
#gp_random_username_length 6
#gp_random_password_length 6
#gp_randomize_case lower
#gp_useradd_homedir_path /var/ftp
#gp_html_path /var/www/html/ftp.htm
#gp_welcome_name welcome.msg
<IfModule mod_tls.c>
TLSEngine off
TLSRequired off
TLSVerifyClient off
TLSProtocol SSLv23 , TLSv1
TLSLog /var/log/proftpd_tls.log
TLSRSACertificateFile /etc/gadmin-proftpd/certs/cert.pem
TLSRSACertificateKeyFile /etc/gadmin-proftpd/certs/key.pem
TLSCACertificateFile /etc/gadmin-proftpd/certs/cacert.pem
TLSRenegotiate required off
</IfModule>
<IfModule mod_ratio.c>
Ratios off
SaveRatios off
RatioFile "/restricted/proftpd_ratios"
RatioTempFile "/restricted/proftpd_ratios_temp"
CwdRatioMsg "Please upload first!"
FileRatioErrMsg "FileRatio limit exceeded, upload something first..."
ByteRatioErrMsg "ByteRatio limit exceeded, upload something first..."
LeechRatioMsg "Your ratio is unlimited."
</IfModule>
<Limit LOGIN>
DenyALL
</Limit>
Codice: Seleziona tutto
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
#
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
# security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
########## Printing ##########
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes
# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
# domain master = auto
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = no
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
; write list = root, @ntadmin
# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes
# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom
Codice: Seleziona tutto
log.__ffff_87.11.170.253 log.nome-smkcjy9vy8
log.__ffff_87.11.170.9 log.nome-suy66u0sy5
log.__ffff_87.11.171.244 log.nome-t8jj19k5bz
log.__ffff_87.11.17.161 log.nome-vyb2bs0eht
log.__ffff_87.11.17.249 log.nome-zjczxvbdi1
log.__ffff_87.11.17.250 log.none-2e6f1485a6
log.__ffff_87.11.172.58 log.nonno
log.__ffff_87.11.174.30 log.nos-ueherdia2qo
log.__ffff_87.11.175.102 log.oem
log.__ffff_87.11.17.61 log.oem-42pm5wddew1
log.__ffff_87.11.176.169 log.oem-h8p9xsvze5t
log.__ffff_87.11.176.86 log.oem-irt5hroawwv
log.__ffff_87.11.179.28 log.oem-ltjjtcpvldf
log.__ffff_87.11.179.82 log.oem-mc5528bbvhe
log.__ffff_87.11.180.107 log.paolo-yy1se0rf4
log.__ffff_87.11.180.195 log.patrick
log.__ffff_87.11.180.196 log.pazo283
log.__ffff_87.11.180.50 log.pc
log.__ffff_87.11.181.201 log.pc2-s15k0ax3osk
log.__ffff_87.11.182.101 log.pc-di-fab
log.__ffff_87.1.118.37 log.pcfissomirko
log.__ffff_87.11.18.6 log.pc-grmnfpxmltxz
log.__ffff_87.11.186.165 log.pc-utente
log.__ffff_87.11.187.115 log.personal-5psljo
log.__ffff_87.11.187.120 log.pier-unbn6cnlmg
log.__ffff_87.11.187.240 log.pietro-tl1lyzke
log.__ffff_87.11.18.75 log.pietro-xb
log.__ffff_87.11.187.93 log.pino-535f865261
log.__ffff_87.11.188.184 log.pipirinnaro
log.__ffff_87.11.188.41 log.pippo-0m6twlx88
log.__ffff_87.11.189.251 log.pito-t4099u74wr
log.__ffff_87.11.189.60 log.pl-408a47021ef3
log.__ffff_87.11.190.104 log.pornosta-b02dc9
log.__ffff_87.11.190.210 log.port
log.__ffff_87.11.191.58 log.primo-odfznfkna
log.__ffff_87.11.19.197 log.provvidenza
log.__ffff_87.11.192.96 log.pulcepc
log.__ffff_87.11.193.178 log.raffaele
log.__ffff_87.11.194.132 log.raffaella
log.__ffff_87.11.194.23 log.rampeiras
log.__ffff_87.11.194.3 log.roberta-i8g7ean
guarda, ci metterei la mano sul fuoco. Senz'altro è stato quello, si capisce anche da questi nomi di log strani.Maurizio.M ha scritto: ok, quindi secondo te era questo che mi faceva comparire i file??? Perchè la cosa ora comincia ad aver senso...
Guarda te, sto così attento alla sicurezza e alle password e poi mi dimentico il desktop condiviso... che testa...
Visualizzano questa sezione: 0 utenti iscritti e 2 ospiti