dmesg

Sicurezza del sistema: firewall, antispam, antivirus, ssh, patch, bug, eccetera.
sandrozu
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1025
Iscrizione: sabato 1 novembre 2008, 17:26

dmesg

Messaggio da sandrozu »

Ciao a tutti .    Mi ero collegato ad un sito x vedere in streaming.  Dopo aver chiuso il browser mi sono accorto che avevo le cpu che lavoravano attorno 20-30 % ,molto strano.  Ho dato il comando e come risultato mi ha dato questo :

1878.269565] lo: Disabled Privacy Extensions
[ 1955.435768] lo: Disabled Privacy Extensions
[ 6870.627057] lo: Disabled Privacy Extensions
[ 7003.198471] lo: Disabled Privacy Extensions
[ 7349.048982] __ratelimit: 6 callbacks suppressed
[ 7349.048988] npviewer.bin[24157]: segfault at 0 ip 00000000f6223741 sp 00000000fff7a770 error 4 in libflashplayer.so[f5e84000+b2c000]
[ 7535.031210] lo: Disabled Privacy Extensions



Qui il tutto: 

Codice: Seleziona tutto

   0.571757] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[    0.571762] pci 0000:00:1c.3:   IO window: disabled
[    0.571771] pci 0000:00:1c.3:   MEM window: disabled
[    0.571779] pci 0000:00:1c.3:   PREFETCH window: disabled
[    0.571788] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[    0.571795] pci 0000:00:1c.4:   IO window: 0xc000-0xcfff
[    0.571806] pci 0000:00:1c.4:   MEM window: 0xfdd00000-0xfe4fffff
[    0.571814] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.571823] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[    0.571828] pci 0000:00:1c.5:   IO window: disabled
[    0.571838] pci 0000:00:1c.5:   MEM window: 0xfe500000-0xfe5fffff
[    0.571847] pci 0000:00:1c.5:   PREFETCH window: disabled
[    0.571857] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[    0.571861] pci 0000:00:1e.0:   IO window: disabled
[    0.571872] pci 0000:00:1e.0:   MEM window: 0xfe600000-0xfe6fffff
[    0.571880] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.571903]   alloc irq_desc for 16 on node 0
[    0.571908]   alloc kstat_irqs on node 0
[    0.571920] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.571931] pci 0000:00:1c.0: setting latency timer to 64
[    0.571945]   alloc irq_desc for 17 on node 0
[    0.571949]   alloc kstat_irqs on node 0
[    0.571957] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.571966] pci 0000:00:1c.1: setting latency timer to 64
[    0.571980]   alloc irq_desc for 18 on node 0
[    0.571984]   alloc kstat_irqs on node 0
[    0.571992] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.572001] pci 0000:00:1c.2: setting latency timer to 64
[    0.572015]   alloc irq_desc for 19 on node 0
[    0.572019]   alloc kstat_irqs on node 0
[    0.572027] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.572036] pci 0000:00:1c.3: setting latency timer to 64
[    0.572050] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.572059] pci 0000:00:1c.4: setting latency timer to 64
[    0.572074] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.572083] pci 0000:00:1c.5: setting latency timer to 64
[    0.572096] pci 0000:00:1e.0: setting latency timer to 64
[    0.572106] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.572113] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.572120] pci_bus 0000:03: resource 0 io:  [0xb000-0xbfff]
[    0.572126] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[    0.572132] pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
[    0.572138] pci_bus 0000:05: resource 1 mem: [0xfdd00000-0xfe4fffff]
[    0.572144] pci_bus 0000:05: resource 2 mem: [0xbdf00000-0xbfefffff]
[    0.572150] pci_bus 0000:07: resource 1 mem: [0xfe500000-0xfe5fffff]
[    0.572156] pci_bus 0000:08: resource 1 mem: [0xfe600000-0xfe6fffff]
[    0.572162] pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
[    0.572167] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.572252] NET: Registered protocol family 2
[    0.572688] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.575713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.583601] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.584545] TCP: Hash tables configured (established 524288 bind 65536)
[    0.584552] TCP reno registered
[    0.584796] NET: Registered protocol family 1
[    0.584952] Trying to unpack rootfs image as initramfs...
[    1.057382] Freeing initrd memory: 7928k freed
[    1.063840] Simple Boot Flag at 0x52 set to 0x1
[    1.064266] Scanning for low memory corruption every 60 seconds
[    1.064573] audit: initializing netlink socket (disabled)
[    1.064604] type=2000 audit(1284580168.060:1): initialized
[    1.089398] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.092888] VFS: Disk quotas dquot_6.5.2
[    1.093031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.094472] fuse init (API version 7.12)
[    1.094669] msgmni has been set to 6021
[    1.095126] alg: No test for stdrng (krng)
[    1.095159] io scheduler noop registered
[    1.095165] io scheduler anticipatory registered
[    1.095171] io scheduler deadline registered
[    1.095277] io scheduler cfq registered (default)
[    1.095302] pci 0000:00:02.0: Boot video device
[    1.095823]   alloc irq_desc for 24 on node 0
[    1.095841]   alloc kstat_irqs on node 0
[    1.095860] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    1.095877] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.096147]   alloc irq_desc for 25 on node 0
[    1.096152]   alloc kstat_irqs on node 0
[    1.096167] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    1.096183] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.096442]   alloc irq_desc for 26 on node 0
[    1.096447]   alloc kstat_irqs on node 0
[    1.096462] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    1.096478] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    1.096738]   alloc irq_desc for 27 on node 0
[    1.096743]   alloc kstat_irqs on node 0
[    1.096757] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[    1.096773] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.097031]   alloc irq_desc for 28 on node 0
[    1.097036]   alloc kstat_irqs on node 0
[    1.097051] pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
[    1.097067] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.097345]   alloc irq_desc for 29 on node 0
[    1.097350]   alloc kstat_irqs on node 0
[    1.097365] pcieport-driver 0000:00:1c.5: irq 29 for MSI/MSI-X
[    1.097381] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.097581] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.098340] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2847 ss_vid 0 ss_did 0
[    1.098429] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[    1.098451] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.098882] ACPI: AC Adapter [AC0] (on-line)
[    1.099037] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.099045] ACPI: Power Button [PWRF]
[    1.099195] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.099207] ACPI: Sleep Button [SLPB]
[    1.099305] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    1.101949] ACPI: Lid Switch [LID]
[    1.104105] ACPI: SSDT 00000000bf7b83d0 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    1.105598] ACPI: SSDT 00000000bf7b86f0 00712 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.107831] Monitor-Mwait will be used to enter C-1 state
[    1.107889] Monitor-Mwait will be used to enter C-2 state
[    1.107908] Marking TSC unstable due to TSC halts in idle
[    1.107940] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    1.107997] processor LNXCPU:00: registered as cooling_device0
[    1.108006] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.108848] ACPI: SSDT 00000000bf7b8300 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    1.110018] ACPI: SSDT 00000000bf7b8660 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    1.112464] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    1.112527] processor LNXCPU:01: registered as cooling_device1
[    1.112537] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.125968] thermal LNXTHERM:01: registered as thermal_zone0
[    1.125989] ACPI: Thermal Zone [THRM] (38 C)
[    1.128849] Linux agpgart interface v0.103
[    1.128870] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.131893] brd: module loaded
[    1.133066] loop: module loaded
[    1.133246] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.134157] ata_piix 0000:00:1f.1: version 2.13
[    1.134183] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.134292] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.134446] scsi0 : ata_piix
[    1.134682] scsi1 : ata_piix
[    1.136327] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.136335] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.137080]   alloc irq_desc for 20 on node 0
[    1.137086]   alloc kstat_irqs on node 0
[    1.137100] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.137111] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.137290] ata2: port disabled. ignoring.
[    1.175861] ACPI: Battery Slot [BAT0] (battery present)
[    1.290280] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.290399] scsi2 : ata_piix
[    1.290539] scsi3 : ata_piix
[    1.293294] ata3: SATA max UDMA/133 cmd 0xe880 ctl 0xe800 bmdma 0xe080 irq 20
[    1.293305] ata4: SATA max UDMA/133 cmd 0xe480 ctl 0xe400 bmdma 0xe088 irq 20
[    1.295426] Fixed MDIO Bus: probed
[    1.295510] PPP generic driver version 2.4.2
[    1.295740] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.295873] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.295909] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.295917] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.296010] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.299922] ehci_hcd 0000:00:1a.7: debug port 1
[    1.299933] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    1.299964] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeaff400
[    1.310356] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JR03, max UDMA/33
[    1.320027] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.320187] usb usb1: configuration #1 chosen from 1 choice
[    1.320255] hub 1-0:1.0: USB hub found
[    1.320271] hub 1-0:1.0: 4 ports detected
[    1.320448]   alloc irq_desc for 23 on node 0
[    1.320454]   alloc kstat_irqs on node 0
[    1.320467] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.320492] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.320499] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.320578] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.324490] ehci_hcd 0000:00:1d.7: debug port 1
[    1.324501] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.324526] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaff000
[    1.340024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.340163] usb usb2: configuration #1 chosen from 1 choice
[    1.340233] hub 2-0:1.0: USB hub found
[    1.340247] hub 2-0:1.0: 6 ports detected
[    1.340404] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.340447] uhci_hcd: USB Universal Host Controller Interface driver
[    1.340642] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.340658] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.340665] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.340740] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.340791] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
[    1.340965] usb usb3: configuration #1 chosen from 1 choice
[    1.341027] hub 3-0:1.0: USB hub found
[    1.341041] hub 3-0:1.0: 2 ports detected
[    1.341197]   alloc irq_desc for 21 on node 0
[    1.341202]   alloc kstat_irqs on node 0
[    1.341214] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.341227] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.341234] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.341313] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.341361] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d880
[    1.341539] usb usb4: configuration #1 chosen from 1 choice
[    1.341600] hub 4-0:1.0: USB hub found
[    1.341628] hub 4-0:1.0: 2 ports detected
[    1.341788] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.341801] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.341809] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.341881] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.341918] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800
[    1.342094] usb usb5: configuration #1 chosen from 1 choice
[    1.342155] hub 5-0:1.0: USB hub found
[    1.342169] hub 5-0:1.0: 2 ports detected
[    1.342313] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.342326] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.342333] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.342409] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.342462] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[    1.342630] usb usb6: configuration #1 chosen from 1 choice
[    1.342697] hub 6-0:1.0: USB hub found
[    1.342711] hub 6-0:1.0: 2 ports detected
[    1.342865] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.342878] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.342886] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.342957] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.342993] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    1.343165] usb usb7: configuration #1 chosen from 1 choice
[    1.343232] hub 7-0:1.0: USB hub found
[    1.343249] hub 7-0:1.0: 2 ports detected
[    1.343471] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.345438] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.346112] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.346124] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.346132] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.346139] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.346146] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.346284] mice: PS/2 mouse device common for all mice
[    1.346511] rtc_cmos 00:03: RTC can wake from S4
[    1.346601] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.346637] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.346940] device-mapper: uevent: version 1.0.3
[    1.347156] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.347304] device-mapper: multipath: version 1.1.0 loaded
[    1.347312] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.347783] cpuidle: using governor ladder
[    1.347995] cpuidle: using governor menu
[    1.348963] TCP cubic registered
[    1.349288] NET: Registered protocol family 10
[    1.350302] ata1.00: configured for UDMA/33
[    1.350343] lo: Disabled Privacy Extensions
[    1.351056] NET: Registered protocol family 17
[    1.351102] Bluetooth: L2CAP ver 2.13
[    1.351107] Bluetooth: L2CAP socket layer initialized
[    1.351116] Bluetooth: SCO (Voice Link) ver 0.6
[    1.351121] Bluetooth: SCO socket layer initialized
[    1.351196] Bluetooth: RFCOMM TTY layer initialized
[    1.351203] Bluetooth: RFCOMM socket layer initialized
[    1.351208] Bluetooth: RFCOMM ver 1.11
[    1.353088] PM: Resume from disk failed.
[    1.353104] registered taskstats version 1
[    1.353267]   Magic number: 10:947:849
[    1.353379] rtc_cmos 00:03: setting system clock to 2010-09-15 19:49:29 UTC (1284580169)
[    1.353382] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.353384] EDD information not available.
[    1.355803] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JR03 PQ: 0 ANSI: 5
[    1.367069] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.367072] Uniform CD-ROM driver Revision: 3.20
[    1.367174] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.367230] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.379063] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.500024] Clocksource tsc unstable (delta = -135527528 ns)
[    1.642530] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    1.803845] usb 1-3: configuration #1 chosen from 1 choice
[    2.000912] ata4.00: SATA link down (SStatus 0 SControl 300)
[    2.000928] ata4.01: SATA link down (SStatus 0 SControl 0)
[    2.160094] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.160107] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.180449] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
[    2.180453] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.220680] ata3.00: configured for UDMA/133
[    2.220784] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[    2.220922] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.220928] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.220975] sd 2:0:0:0: [sda] Write Protect is off
[    2.220978] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.221003] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.221134]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.273776] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.273826] Freeing unused kernel memory: 668k freed
[    2.274098] Write protecting the kernel read-only data: 7600k
[    2.330078] usb 7-1: new low speed USB device using uhci_hcd and address 2
[    2.421428] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    2.421798] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    2.425061] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    2.452665] [drm] Initialized drm 1.1.0 20060810
[    2.517397] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.517405] i915 0000:00:02.0: setting latency timer to 64
[    2.529024] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.529056] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.529112] r8169 0000:03:00.0: setting latency timer to 64
[    2.529183]   alloc irq_desc for 30 on node 0
[    2.529186]   alloc kstat_irqs on node 0
[    2.529205] r8169 0000:03:00.0: irq 30 for MSI/MSI-X
[    2.529889] eth0: RTL8168b/8111b at 0xffffc9001068c000, 00:22:15:8a:63:ad, XID 38000000 IRQ 30
[    2.535539] ohci1394 0000:08:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.535728]   alloc irq_desc for 31 on node 0
[    2.535731]   alloc kstat_irqs on node 0
[    2.535742] i915 0000:00:02.0: irq 31 for MSI/MSI-X
[    2.544847] usb 7-1: configuration #1 chosen from 1 choice
[    2.553199] usbcore: registered new interface driver hiddev
[    2.568412] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input5
[    2.568503] generic-usb 0003:046D:C052.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0
[    2.568525] usbcore: registered new interface driver usbhid
[    2.568528] usbhid: v2.6:USB HID core driver
[    2.641397] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[fe6ff800-fe6fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    3.054569] [drm] TV-14: set mode NTSC 480i 0
[    3.183232] [drm] fb0: inteldrmfb frame buffer device
[    3.190800] acpi device:1f: registered as cooling_device2
[    3.190954] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/input/input6
[    3.190989] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.191014] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.258997] [drm] LVDS-8: set mode 1440x900 17
[    3.459285] Console: switching to colour frame buffer device 180x56
[    3.620723] xor: automatically using best checksumming function: generic_sse
[    3.670003]    generic_sse:  6826.400 MB/sec
[    3.670006] xor: using function: generic_sse (6826.400 MB/sec)
[    3.675995] device-mapper: dm-raid45: initialized v0.2594b
[    3.866703] PM: Starting manual resume from disk
[    3.866708] PM: Resume from partition 8:6
[    3.866710] PM: Checking hibernation image.
[    3.866964] PM: Resume from disk failed.
[    3.880608] EXT4-fs (sda5): barriers enabled
[    3.898808] kjournald2 starting: pid 439, dev sda5:8, commit interval 5 seconds
[    3.898898] EXT4-fs (sda5): delayed allocation enabled
[    3.898902] EXT4-fs: file extents enabled
[    3.899459] EXT4-fs: mballoc enabled
[    3.899478] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    3.960175] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c000169fe8b]
[    4.535779] type=1505 audit(1284580172.676:2): operation="profile_load" pid=464 name=/usr/share/gdm/guest-session/Xsession
[    4.538703] type=1505 audit(1284580172.676:3): operation="profile_load" pid=465 name=/sbin/dhclient3
[    4.539489] type=1505 audit(1284580172.676:4): operation="profile_load" pid=465 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.539912] type=1505 audit(1284580172.676:5): operation="profile_load" pid=465 name=/usr/lib/connman/scripts/dhclient-script
[    4.590486] type=1505 audit(1284580172.736:6): operation="profile_load" pid=466 name=/usr/bin/evince
[    4.603430] type=1505 audit(1284580172.746:7): operation="profile_load" pid=466 name=/usr/bin/evince-previewer
[    4.610835] type=1505 audit(1284580172.756:8): operation="profile_load" pid=466 name=/usr/bin/evince-thumbnailer
[    4.675176] type=1505 audit(1284580172.816:9): operation="profile_load" pid=468 name=/usr/bin/freshclam
[   17.788666] udev: starting version 147
[   17.806649] asus_laptop: Asus Laptop Support version 0.42
[   17.812880] asus_laptop:   F7L model detected
[   17.813777] input: Asus Laptop extra buttons as /devices/virtual/input/input7
[   17.813906] Registered led device: asus::mail
[   17.821262] Adding 4883720k swap on /dev/sda6.  Priority:-1 extents:1 across:4883720k 
[   17.821473] lp: driver loaded but no devices found
[   17.824156] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[   17.899979] sdhci: Secure Digital Host Controller Interface driver
[   17.900074] sdhci: Copyright(c) Pierre Ossman
[   17.901926] sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 22)
[   17.901949] sdhci-pci 0000:08:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   17.903006] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   17.903692] ricoh-mmc: Ricoh MMC Controller disabling driver
[   17.903695] ricoh-mmc: Copyright(c) Philip Langdale
[   17.904088] Registered led device: mmc0::
[   17.905135] mmc0: SDHCI controller on PCI [0000:08:01.1] using DMA
[   17.924452] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.2 [1180:0843] (rev 12)
[   17.924479] ricoh-mmc: Controller is now disabled.
[   18.031961] cfg80211: Calling CRDA to update world regulatory domain
[   18.105428] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.108443] ath5k 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   18.108456] ath5k 0000:07:00.0: setting latency timer to 64
[   18.108518] ath5k 0000:07:00.0: registered as 'phy0'
[   18.119933] Linux video capture interface: v2.00
[   18.122838] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam  (04f2:b012)
[   18.128435] cfg80211: World regulatory domain updated:
[   18.128440]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.128444]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.128447]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.128449]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.128452]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.128455]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.144393] input: USB2.0 1.3M UVC WebCam  as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
[   18.144453] usbcore: registered new interface driver uvcvideo
[   18.144456] USB Video Class driver (v0.1.0)
[   18.573383]   alloc irq_desc for 22 on node 0
[   18.573387]   alloc kstat_irqs on node 0
[   18.573396] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   18.573461]   alloc irq_desc for 32 on node 0
[   18.573463]   alloc kstat_irqs on node 0
[   18.573474] HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X
[   18.573511] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   18.613191] EXT4-fs (sda5): internal journal on sda5:8
[   18.614989] ath: EEPROM regdomain: 0x60
[   18.614992] ath: EEPROM indicates we should expect a direct regpair map
[   18.614996] ath: Country alpha2 being used: 00
[   18.614998] ath: Regpair used: 0x60
[   18.625913] phy0: Selected rate control algorithm 'minstrel'
[   18.626667] Registered led device: ath5k-phy0::rx
[   18.626687] Registered led device: ath5k-phy0::tx
[   18.626691] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   18.762132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   18.974603] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   19.018411] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[   19.545492] EXT4-fs (sda7): barriers enabled
[   19.547915] kjournald2 starting: pid 924, dev sda7:8, commit interval 5 seconds
[   19.548301] EXT4-fs (sda7): internal journal on sda7:8
[   19.548305] EXT4-fs (sda7): delayed allocation enabled
[   19.548308] EXT4-fs: file extents enabled
[   19.553453] EXT4-fs: mballoc enabled
[   19.553472] EXT4-fs (sda7): mounted filesystem with ordered data mode
[   19.957663] __ratelimit: 12 callbacks suppressed
[   19.957666] type=1505 audit(1284572988.099:14): operation="profile_replace" pid=1064 name=/usr/share/gdm/guest-session/Xsession
[   19.959841] type=1505 audit(1284572988.099:15): operation="profile_replace" pid=1065 name=/sbin/dhclient3
[   19.960642] type=1505 audit(1284572988.099:16): operation="profile_replace" pid=1065 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   19.961065] type=1505 audit(1284572988.099:17): operation="profile_replace" pid=1065 name=/usr/lib/connman/scripts/dhclient-script
[   19.966158] type=1505 audit(1284572988.109:18): operation="profile_replace" pid=1066 name=/usr/bin/evince
[   19.979181] type=1505 audit(1284572988.119:19): operation="profile_replace" pid=1066 name=/usr/bin/evince-previewer
[   19.986927] type=1505 audit(1284572988.129:20): operation="profile_replace" pid=1066 name=/usr/bin/evince-thumbnailer
[   19.998282] type=1505 audit(1284572988.139:21): operation="profile_replace" pid=1068 name=/usr/bin/freshclam
[   20.001439] type=1505 audit(1284572988.139:22): operation="profile_replace" pid=1069 name=/usr/lib/cups/backend/cups-pdf
[   20.002414] type=1505 audit(1284572988.139:23): operation="profile_replace" pid=1069 name=/usr/sbin/cupsd
[   22.072833] r8169: eth0: link up
[   22.072841] r8169: eth0: link up
[   22.143137] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.423581] [drm] TV-14: set mode NTSC 480i 0
[   22.565953] [drm] TV-14: set mode NTSC 480i 0
[   22.850252] [drm] TV-14: set mode NTSC 480i 0
[   22.992761] [drm] TV-14: set mode NTSC 480i 0
[   24.224212] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   24.224216] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[   24.224217] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   24.224219] vboxdrv: the usage of hardware performance counters by
[   24.224220] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   24.224224] vboxdrv: Found 2 processor cores.
[   24.224301] VBoxDrv: dbg - g_abExecMemory=ffffffffa03a3460
[   24.224328] vboxdrv: fAsync=0 offMin=0x150 offMax=0x2282
[   24.224392] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   24.224395] vboxdrv: Successfully loaded version 3.1.6 (interface 0x00100001).
[   24.705478] ppdev: user-space parallel port driver
[   25.941013] [drm] TV-14: set mode NTSC 480i 0
[   26.082531] [drm] TV-14: set mode NTSC 480i 0
[   26.376875] [drm] TV-14: set mode NTSC 480i 0
[   26.520343] [drm] TV-14: set mode NTSC 480i 0
[   26.807272] [drm] TV-14: set mode NTSC 480i 0
[   26.948719] [drm] TV-14: set mode NTSC 480i 0
[   28.107536] [drm] TV-14: set mode NTSC 480i 0
[   28.250115] [drm] TV-14: set mode NTSC 480i 0
[   32.692534] eth0: no IPv6 routers present
[ 1878.269565] lo: Disabled Privacy Extensions
[ 1955.435768] lo: Disabled Privacy Extensions
[ 6870.627057] lo: Disabled Privacy Extensions
[ 7003.198471] lo: Disabled Privacy Extensions
[ 7349.048982] __ratelimit: 6 callbacks suppressed
[ 7349.048988] npviewer.bin[24157]: segfault at 0 ip 00000000f6223741 sp 00000000fff7a770 error 4 in libflashplayer.so[f5e84000+b2c000]
[ 7535.031210] lo: Disabled Privacy Extensions
 
Confido in voi ...grazie
Avatar utente
il_muflone
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 18878
Iscrizione: venerdì 1 maggio 2009, 15:31
Desktop: GNOME Shell
Distribuzione: Arch Linux x86_64
Località: Profondo sud
Contatti:

Re: dmesg

Messaggio da il_muflone »

e` crashato flash,  che c'e` di strano? :)
http://www.muflone.com - I miei contatti e i miei progetti - La guida completa a VirtualBox
Non mandatemi messaggi privati per chiedere aiuto, li cancello senza rispondere nemmeno.
sandrozu
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1025
Iscrizione: sabato 1 novembre 2008, 17:26

Re: dmesg

Messaggio da sandrozu »

il_muflone ha scritto: e` crashato flash,  che c'e` di strano? :)
Grazie mille  muflone  ma mi sembrava strano Disabled Privacy Extensions
Grazie mille!!
Avatar utente
il_muflone
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 18878
Iscrizione: venerdì 1 maggio 2009, 15:31
Desktop: GNOME Shell
Distribuzione: Arch Linux x86_64
Località: Profondo sud
Contatti:

Re: dmesg

Messaggio da il_muflone »

ma quello ce l'avevi pure durante l'avvio
[    1.350343] lo: Disabled Privacy Extensions
ovvero dopo un secondo e mezzo dall'avvio della root.

si tratta di una funzionalita` puramente per IPv6:
Privacy Extensions (RFC3041) is designed to make it difficult for eavesdroppers and other information collectors to identify actually correspond to the same node by changing the interface identifier periodically.
http://forum.nginx.org/read.php?26,27766,27995
http://lwn.net/Articles/14294/

e` normalmente disattivata per l'interfaccia di loopback.
http://www.muflone.com - I miei contatti e i miei progetti - La guida completa a VirtualBox
Non mandatemi messaggi privati per chiedere aiuto, li cancello senza rispondere nemmeno.
sandrozu
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1025
Iscrizione: sabato 1 novembre 2008, 17:26

Re: dmesg

Messaggio da sandrozu »

il_muflone ha scritto: ma quello ce l'avevi pure durante l'avvio
[    1.350343] lo: Disabled Privacy Extensions
ovvero dopo un secondo e mezzo dall'avvio della root.

si tratta di una funzionalita` puramente per IPv6:
Privacy Extensions (RFC3041) is designed to make it difficult for eavesdroppers and other information collectors to identify actually correspond to the same node by changing the interface identifier periodically.
http://forum.nginx.org/read.php?26,27766,27995
http://lwn.net/Articles/14294/

e` normalmente disattivata per l'interfaccia di loopback.
È la prima volta !!!  È  x questo che mi è sorto il dubbio
Avatar utente
il_muflone
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 18878
Iscrizione: venerdì 1 maggio 2009, 15:31
Desktop: GNOME Shell
Distribuzione: Arch Linux x86_64
Località: Profondo sud
Contatti:

Re: dmesg

Messaggio da il_muflone »

non è la prima volta, quello all'avvio a 1,3 secondi circa l'hai sempre avuto.
forse è la prima volta che lo noti alla fine del log, ma quello prima c'è sempre stato.
nel link indicato si vede chiaramente che è scritto proprio dentro il sorgente, di disattivarla per l'interfaccia loopback.

quindi quando si avvia l'interfaccia lo appare sempre quel messaggio.
http://www.muflone.com - I miei contatti e i miei progetti - La guida completa a VirtualBox
Non mandatemi messaggi privati per chiedere aiuto, li cancello senza rispondere nemmeno.
sandrozu
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1025
Iscrizione: sabato 1 novembre 2008, 17:26

Re: dmesg

Messaggio da sandrozu »

il_muflone ha scritto: non è la prima volta, quello all'avvio a 1,3 secondi circa l'hai sempre avuto.
forse è la prima volta che lo noti alla fine del log, ma quello prima c'è sempre stato.
nel link indicato si vede chiaramente che è scritto proprio dentro il sorgente, di disattivarla per l'interfaccia loopback.

quindi quando si avvia l'interfaccia lo appare sempre quel messaggio.
adesso ci farò attenzione....grazie mille !
Scrivi risposta

Ritorna a “Sicurezza”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 1 ospite