Sono oramai qualche volta che mi capita di ritrovarmi il fil stistem in modalità read only e mi tocca riavviare.
Questo solitamente dopo il rientro dalla sospensione del pc, quindi dopo che l'ho lascaito un po' senza essere utilizzato.
Il file sistem read only poi riguarda sia la partizione con il sistema operativo e sia eventuali altre partizioni mountate al momento.
Avrò mica preso qualche trojan o malware ?
Ora provo a fare una scansione con avira rescue system.
File sistem in modalità read only
-
Sam9999
- Entusiasta Emergente
- Messaggi: 1983
- Iscrizione: lunedì 9 giugno 2014, 8:59
- Desktop: Studio Xfce
- Distribuzione: Ubuntu 20.04 LTS (Focal)
- Località: BO
- Contatti:
File sistem in modalità read only
-------------
S. @-M.
-------------
S. @-M.
-------------
-
maxbigsi
- Tenace Tecnocrate
- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: File sistem in modalità read only
piuttosto fai un controllo del disco 
AmministrazioneSistema/VerificaDiscoFisso
AmministrazioneSistema/VerificaDiscoFissoW il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
-
Sam9999
- Entusiasta Emergente
- Messaggi: 1983
- Iscrizione: lunedì 9 giugno 2014, 8:59
- Desktop: Studio Xfce
- Distribuzione: Ubuntu 20.04 LTS (Focal)
- Località: BO
- Contatti:
Re: File sistem in modalità read only
Lo farò anche perché rescue system non ha visto le partizioni e quindi non h effettuato controlli.maxbigsi [url=https://forum.ubuntu-it.org/viewtopic.php?p=5067428#p5067428][img]https://forum.ubuntu-it.org/images/icons/icona-cita.gif[/img][/url] ha scritto:piuttosto fai un controllo del disco
Ma i dischi credo siano a posto dal punto di vista fisico...
C'è un AV per linux, credo di si dopo cerco, magari consigliato?
Per ora ho datu questo comando e mi pare tutto a posto:
Codice: Seleziona tutto
sudo smartctl -a /dev/sda
[sudo] password for sam:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-23-lowlatency] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD6400AAKS-22A7B2
Serial Number: WD-WCASY5499681
LU WWN Device Id: 5 0014ee 25838e6b2
Firmware Version: 01.03B01
User Capacity: 640.135.028.736 bytes [640 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Fri Jun 29 11:20:33 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (11160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 131) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 159 155 021 Pre-fail Always - 5008
4 Start_Stop_Count 0x0032 086 086 000 Old_age Always - 14683
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 23147
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 086 086 000 Old_age Always - 14539
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 449
193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 14683
194 Temperature_Celsius 0x0022 108 093 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 406 -
# 2 Short offline Aborted by host 10% 406 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Codice: Seleziona tutto
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-23-lowlatency] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD6400AAKS-22A7B2
Serial Number: WD-WCASY5499681
LU WWN Device Id: 5 0014ee 25838e6b2
Firmware Version: 01.03B01
User Capacity: 640,135,028,736 bytes [640 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Fri Jun 29 11:26:49 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (11160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 131) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 159 155 021 - 5008
4 Start_Stop_Count -O--CK 086 086 000 - 14683
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 069 069 000 - 23147
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 086 086 000 - 14539
192 Power-Off_Retract_Count -O--CK 200 200 000 - 449
193 Load_Cycle_Count -O--CK 196 196 000 - 14683
194 Temperature_Celsius -O---K 106 093 000 - 41
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 23147 -
# 2 Short offline Completed without error 00% 406 -
# 3 Short offline Aborted by host 10% 406 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 41 Celsius
Power Cycle Min/Max Temperature: 35/41 Celsius
Lifetime Min/Max Temperature: ?/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (105)
Index Estimated Time Temperature Celsius
106 2018-06-29 09:19 33 **************
107 2018-06-29 09:20 33 **************
108 2018-06-29 09:21 34 ***************
109 2018-06-29 09:22 34 ***************
110 2018-06-29 09:23 36 *****************
111 2018-06-29 09:24 36 *****************
112 2018-06-29 09:25 36 *****************
113 2018-06-29 09:26 37 ******************
114 2018-06-29 09:27 37 ******************
115 2018-06-29 09:28 37 ******************
116 2018-06-29 09:29 38 *******************
... ..( 3 skipped). .. *******************
120 2018-06-29 09:33 38 *******************
121 2018-06-29 09:34 39 ********************
122 2018-06-29 09:35 39 ********************
123 2018-06-29 09:36 39 ********************
124 2018-06-29 09:37 40 *********************
125 2018-06-29 09:38 39 ********************
126 2018-06-29 09:39 40 *********************
127 2018-06-29 09:40 41 **********************
... ..( 12 skipped). .. **********************
12 2018-06-29 09:53 41 **********************
13 2018-06-29 09:54 42 ***********************
... ..( 15 skipped). .. ***********************
29 2018-06-29 10:10 42 ***********************
30 2018-06-29 10:11 43 ************************
31 2018-06-29 10:12 43 ************************
32 2018-06-29 10:13 43 ************************
33 2018-06-29 10:14 44 *************************
34 2018-06-29 10:15 43 ************************
... ..( 5 skipped). .. ************************
40 2018-06-29 10:21 43 ************************
41 2018-06-29 10:22 ? -
42 2018-06-29 10:23 43 ************************
43 2018-06-29 10:24 42 ***********************
44 2018-06-29 10:25 42 ***********************
45 2018-06-29 10:26 43 ************************
46 2018-06-29 10:27 42 ***********************
47 2018-06-29 10:28 43 ************************
... ..( 33 skipped). .. ************************
81 2018-06-29 11:02 43 ************************
82 2018-06-29 11:03 ? -
83 2018-06-29 11:04 35 ****************
84 2018-06-29 11:05 35 ****************
85 2018-06-29 11:06 35 ****************
86 2018-06-29 11:07 36 *****************
87 2018-06-29 11:08 36 *****************
88 2018-06-29 11:09 37 ******************
... ..( 2 skipped). .. ******************
91 2018-06-29 11:12 37 ******************
92 2018-06-29 11:13 38 *******************
... ..( 3 skipped). .. *******************
96 2018-06-29 11:17 38 *******************
97 2018-06-29 11:18 39 ********************
... ..( 2 skipped). .. ********************
100 2018-06-29 11:21 39 ********************
101 2018-06-29 11:22 40 *********************
102 2018-06-29 11:23 40 *********************
103 2018-06-29 11:24 41 **********************
104 2018-06-29 11:25 40 *********************
105 2018-06-29 11:26 41 **********************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x8000 4 1381 Vendor specific-------------
S. @-M.
-------------
S. @-M.
-------------
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 17 ospiti