Problema programmazione arduino

[inca]

Ciao a tutti, come da oggetto ho un problema nella programmazione di arduino uno. Ho scaricato il programma, installato tutte le dipendenze,ma quando tento di programmare il messaggio è : avrdude: stk500_recv(): programmer is not responding. l'arduino l'ho collegato con usb e non su hub e il programma lo avvio da terminale : sudo arduino.
con lsusb:

Codice: Seleziona tutto

Bus 002 Device 004: ID 2341:0001  
Bus 002 Device 002: ID 1241:1603 Belkin 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 080c:0300 Datalogic S.p.A. Gryphon D120 Barcode Scanner
Bus 001 Device 005: ID 05e3:070e Genesys Logic, Inc. X-PRO CR20xA USB 2.0 Internal Card Reader
Bus 001 Device 003: ID 03f0:5311 Hewlett-Packard OfficeJet 6300
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

con

Codice: Seleziona tutto

dmesg | grep ttyUS*:

niente
Nel pannello del programma arduino tools - serial port- ho solo /dev/ttyS0
...ultima cosa, uso ubuntu 10.04
Qualcuno può aiutarmi ?

[magozurlinux]

Ciao,

il tuo adattatore seriale  - usb è quello evidenziato in rosso:

Bus 002 Device 004: ID 2341:0001
Bus 002 Device 002: ID 1241:1603 Belkin
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 080c:0300 Datalogic S.p.A. Gryphon D120 Barcode Scanner
Bus 001 Device 005: ID 05e3:070e Genesys Logic, Inc. X-PRO CR20xA USB 2.0 Internal Card Reader
Bus 001 Device 003: ID 03f0:5311 Hewlett-Packard OfficeJet 6300
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Da terminale dai questo comando:

Codice: Seleziona tutto

sudo update-usbids

Da terminale postami questi comandi:

Codice: Seleziona tutto

lsusb

Codice: Seleziona tutto

dmesg | grep /dev/ttyACM0

Codice: Seleziona tutto

dmesg | grep ttyUSB*

[inca]

Grazie...proverò oggi pomeriggio, perchè ho lasciato a casa l'Arduino . Comunque provando vari metodi : tenendo premuto il tasto reset mentre collego l'arduino al pc, e rilasciandolo quando compare la dimensione del file da caricare....FUNZIONA  (b2b)

[inca]

Codice: Seleziona tutto

giorgio@giorgio-desktop:~$ sudo update-usbids
[sudo] password for giorgio: 
--2011-03-18 16:37:22--  http://www.linux-usb.org/usb.ids
Risoluzione di http://www.linux-usb.org... 216.34.181.97
Connessione a http://www.linux-usb.org|216.34.181.97|:80... connesso.
HTTP richiesta inviata, in attesa di risposta... 200 OK
Lunghezza: 447348 (437K) [text/plain]
Salvataggio in: "/var/lib/usbutils/usb.ids.new"

100%[======================================>] 447.348      372K/s   in 1,2s    

2011-03-18 16:37:24 (372 KB/s) - "/var/lib/usbutils/usb.ids.new" salvato [447348/447348]

giorgio@giorgio-desktop:~$ lsusb
Bus 002 Device 003: ID 2341:0001  
Bus 002 Device 002: ID 1241:1603 Belkin Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 080c:0300 Datalogic S.p.A. Gryphon D120 Barcode Scanner
Bus 001 Device 005: ID 05e3:070e Genesys Logic, Inc. USB 2.0 Card Reader
Bus 001 Device 003: ID 03f0:5311 Hewlett-Packard OfficeJet 6300
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

giorgio@giorgio-desktop:~$ dmesg | grep /dev/ttyACM0
giorgio@giorgio-desktop:~$

giorgio@giorgio-desktop:~$ dmesg | grep ttyUSB*
giorgio@giorgio-desktop:~$

[Roberto Pontecorvi]

Mi inserisco ance io perchè da qualche giorno ho lo stesso problema
Grazie

[magozurlinux]

Mi inserisco ance io perchè da qualche giorno ho lo stesso problema
Grazie

Ciao.

Da terminale postami questi comandi col dispositivo Arduino inserito:

Codice: Seleziona tutto

usb-devices

Codice: Seleziona tutto

dmesg | grep usb

Codice: Seleziona tutto

lsmod

[Roberto Pontecorvi]

Codice: Seleziona tutto

roberto@roberto-EP43-S3L:~$ usb-devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.04
S:  Manufacturer=Linux 4.4.0-104-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1a.7
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=07.02
S:  Product=USB2.0 Hub
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=24ae ProdID=2003 Rev=10.01
S:  Manufacturer=RAPOO
S:  Product=RAPOO 5G Wireless Device
C:  #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=200mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=6001 Rev=06.00
S:  Manufacturer=FTDI
S:  Product=FT232R USB UART
S:  SerialNumber=A6006hne
C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=90mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.04
S:  Manufacturer=Linux 4.4.0-104-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-104-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1a.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-104-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1a.1
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-104-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1a.2
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-104-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-104-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=08 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=04.04
S:  Manufacturer=Linux 4.4.0-104-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

-----------------------------------------
--------------------------------------------
roberto@roberto-EP43-S3L:~$ dmesg | grep usb
[    0.157208] usbcore: registered new interface driver usbfs
[    0.157208] usbcore: registered new interface driver hub
[    0.157208] usbcore: registered new device driver usb
[    0.948135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.948194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.948280] usb usb1: Product: EHCI Host Controller
[    0.948333] usb usb1: Manufacturer: Linux 4.4.0-104-generic ehci_hcd
[    0.948388] usb usb1: SerialNumber: 0000:00:1a.7
[    0.964113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.964172] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.964243] usb usb2: Product: EHCI Host Controller
[    0.964296] usb usb2: Manufacturer: Linux 4.4.0-104-generic ehci_hcd
[    0.964351] usb usb2: SerialNumber: 0000:00:1d.7
[    0.965452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.965509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.965579] usb usb3: Product: UHCI Host Controller
[    0.965632] usb usb3: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.965687] usb usb3: SerialNumber: 0000:00:1a.0
[    0.966401] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.966458] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.966528] usb usb4: Product: UHCI Host Controller
[    0.966581] usb usb4: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.966636] usb usb4: SerialNumber: 0000:00:1a.1
[    0.967339] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.967396] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.967466] usb usb5: Product: UHCI Host Controller
[    0.967519] usb usb5: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.967574] usb usb5: SerialNumber: 0000:00:1a.2
[    0.968286] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.968343] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.968413] usb usb6: Product: UHCI Host Controller
[    0.968466] usb usb6: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.968521] usb usb6: SerialNumber: 0000:00:1d.0
[    0.969231] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.969288] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.969358] usb usb7: Product: UHCI Host Controller
[    0.969411] usb usb7: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.969467] usb usb7: SerialNumber: 0000:00:1d.1
[    0.970170] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.970227] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.970297] usb usb8: Product: UHCI Host Controller
[    0.970350] usb usb8: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.970405] usb usb8: SerialNumber: 0000:00:1d.2
[    1.260017] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    1.393400] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
[    1.393459] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.393518] usb 1-5: Product: USB2.0 Hub
[    1.664014] usb 1-5.1: new full-speed USB device number 3 using ehci-pci
[    1.759900] usb 1-5.1: New USB device found, idVendor=24ae, idProduct=2003
[    1.759960] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.760040] usb 1-5.1: Product: RAPOO 5G Wireless Device
[    1.760096] usb 1-5.1: Manufacturer: RAPOO
[    1.770003] usbcore: registered new interface driver usbhid
[    1.770064] usbhid: USB HID core driver
[    1.771837] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/0003:24AE:2003.0001/input/input5
[    1.824138] hid-generic 0003:24AE:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1a.7-5.1/input0
[    1.824790] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.1/0003:24AE:2003.0002/input/input6
[    1.832016] usb 1-5.2: new full-speed USB device number 4 using ehci-pci
[    1.880257] hid-generic 0003:24AE:2003.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1a.7-5.1/input1
[    1.930776] usb 1-5.2: New USB device found, idVendor=0403, idProduct=6001
[    1.930835] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.930908] usb 1-5.2: Product: FT232R USB UART
[    1.930977] usb 1-5.2: Manufacturer: FTDI
[    1.931028] usb 1-5.2: SerialNumber: A6006hne
[   14.796300] usbcore: registered new interface driver usbserial
[   14.796316] usbcore: registered new interface driver usbserial_generic
[   14.796328] usbserial: USB Serial support registered for generic
[   14.802191] usbcore: registered new interface driver ftdi_sio
[   14.802208] usbserial: USB Serial support registered for FTDI USB Serial Device
[   14.860993] usb 1-5.2: Detected FT232RL
[   14.861357] usb 1-5.2: FTDI USB Serial Device converter now attached to ttyUSB0

-------------------------------------------
-------------------------------------------
roberto@roberto-EP43-S3L:~$ lsmod
Module                  Size  Used by
nvram                  16384  0
video                  40960  0
msr                    16384  0
ftdi_sio               53248  0
usbserial              53248  1 ftdi_sio
joydev                 20480  0
input_leds             16384  0
snd_hrtimer            16384  1
nvidia_uvm            761856  0
snd_hda_codec_hdmi     53248  4
gpio_ich               16384  0
coretemp               16384  0
kvm_intel             172032  0
kvm                   544768  1 kvm_intel
irqbypass              16384  1 kvm
serio_raw              16384  0
snd_hda_codec_realtek    90112  1
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
lpc_ich                24576  0
snd_hda_intel          40960  4
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  3 snd_seq_midi_event,snd_seq_midi
snd_hda_core           73728  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  3 snd_hrtimer,snd_pcm,snd_seq
snd                    81920  20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
8250_fintek            16384  0
soundcore              16384  1 snd
shpchp                 36864  0
mac_hid                16384  0
binfmt_misc            20480  1
8139cp                 28672  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
btrfs                 991232  0
xor                    24576  1 btrfs
raid6_pq              102400  1 btrfs
dm_mirror              24576  0
dm_region_hash         24576  1 dm_mirror
dm_log                 20480  2 dm_region_hash,dm_mirror
pata_acpi              16384  0
hid_generic            16384  0
usbhid                 49152  0
hid                   118784  2 hid_generic,usbhid
nvidia_drm             40960  1
nvidia_modeset       1110016  8 nvidia_drm
drm_kms_helper        155648  1 nvidia_drm
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   364544  4 drm_kms_helper,nvidia_drm
nvidia              14368768  322 nvidia_modeset,nvidia_uvm
psmouse               131072  0
ahci                   36864  1
r8169                  81920  0
libahci                32768  1 ahci
mii                    16384  2 r8169,8139cp
pata_jmicron           16384  0
ipmi_msghandler        49152  1 nvidia
fjes                   28672  0
roberto@roberto-EP43-S3L:~$ 

L'errore che restituisce à;

Codice: Seleziona tutto

avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

[magozurlinux]

Segui questa discussione:

https://reprap.org/forum/read.php?146,766342

Prova ad impostare il Baudrate a 57600 anziché 115200

Da terminale dai questi comandi:

Codice: Seleziona tutto

sudo usermod -a -G dialout roberto

Codice: Seleziona tutto

sudo usermod -a -G tty roberto

riavvia il pc.

[Roberto Pontecorvi]

Sembra impossibile; ho dato i comandi chi mi hai suggerito in più avviato ide ho impostato il rate a 57600, dalla scheda "Monitor seriale", e ha fatto la programmazione. Ottimo mi dico. Chiudo il SO (ero sulla 16.4) avvio la 18.4 e faccio le stesse modifiche, da te suggerite, ma purtroppo nulla. Allora ritorno sulla 16.4 e riavvio ide e anche qui stesso errore. Non Va più!!!!!

[magozurlinux]

Da terminale postami questi comandi:

Codice: Seleziona tutto

cat /etc/modules

Codice: Seleziona tutto

ls -l /etc/udev/rules.d

[Roberto Pontecorvi]

Pronti:

Codice: Seleziona tutto

roberto@roberto-EP43-S3L:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
8139cp
--------------------------------------
--------------------------------------
roberto@roberto-EP43-S3L:~$ ls -l /etc/udev/rules.d
totale 8
-rw-r--r-- 1 root root 113 lug 28 11:37 50-local.rules
-rw-r--r-- 1 root root 921 lug  5 08:14 56-hpmud.rules
roberto@roberto-EP43-S3L:~$ 

[magozurlinux]

Da terminale dai questi comandi:

Codice: Seleziona tutto

echo ftdi_sio vendor=0x0403 product=0x6001 | sudo tee -a /etc/modules

Codice: Seleziona tutto

sudo -s

Codice: Seleziona tutto

echo 0403 6001 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id

Codice: Seleziona tutto

chmod 666 /sys/bus/usb-serial/drivers/ftdi_sio/new_id

Codice: Seleziona tutto

exit

riavvia il pc.

[Roberto Pontecorvi]

Ci sono dei problemi. Ecco le risposte dei comandi:

Codice: Seleziona tutto

roberto@roberto-EP43-S3L:~$ echo ftdi_sio vendor=0x0403 product=0x6001 | sudo tee -a /etc/modules
[sudo] password di roberto: 
ftdi_sio vendor=0x0403 product=0x6001

-----------------------------------------------
roberto@roberto-EP43-S3L:~$ sudo -s
----------------------------------------------------------

root@roberto-EP43-S3L:~# echo 0403 6001 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id
bash: /sys/bus/usb-serial/drivers/ftdi_sio/new_id: File o directory non esistente

---------------------------------------------------------------------------------------------------
root@roberto-EP43-S3L:~# chmod 666 /sys/bus/usb-serial/drivers/ftdi_sio/new_id
chmod: impossibile accedere a '/sys/bus/usb-serial/drivers/ftdi_sio/new_id': File o directory non esistente
root@roberto-EP43-S3L:~# 

[magozurlinux]

Da terminale col dispositivo Arduino inserito postami questo comando:

Codice: Seleziona tutto

ls -l /sys/bus/usb-serial/drivers/ftdi_sio

[Roberto Pontecorvi]

roberto@roberto-EP43-S3L:~$ ls -l /sys/bus/usb-serial/drivers/ftdi_sio
ls: impossibile accedere a '/sys/bus/usb-serial/drivers/ftdi_sio': File o directory non esistente
roberto@roberto-EP43-S3L:~$

La cartella -> usb-serial non esiste. C'è la cartella -> usb - ma al suo interno non c'è -> /ftdi_sio. Questo lo ricollega ai messaggi di errore precedenti!!

[magozurlinux]

Da terminale con il dispositivo Arduino inserito, postami questi comandi:

Codice: Seleziona tutto

lsusb -t

Codice: Seleziona tutto

dmesg | grep usb

Codice: Seleziona tutto

ls -l /dev/ttyUSB*

[Roberto Pontecorvi]

Codice: Seleziona tutto

roberto@roberto-EP43-S3L:~$ lsusb -t
/:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
    |__ Port 5: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 4, If 0, Class=Communications, Driver=cdc_acm, 12M
        |__ Port 2: Dev 4, If 1, Class=CDC Data, Driver=cdc_acm, 12M
-----------------------------------------------------------------------------------
roberto@roberto-EP43-S3L:~$ dmesg | grep usb
[    0.157245] usbcore: registered new interface driver usbfs
[    0.157245] usbcore: registered new interface driver hub
[    0.157245] usbcore: registered new device driver usb
[    0.948127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.948186] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.948262] usb usb1: Product: EHCI Host Controller
[    0.948315] usb usb1: Manufacturer: Linux 4.4.0-104-generic ehci_hcd
[    0.948370] usb usb1: SerialNumber: 0000:00:1a.7
[    0.964116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.964175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.964246] usb usb2: Product: EHCI Host Controller
[    0.964299] usb usb2: Manufacturer: Linux 4.4.0-104-generic ehci_hcd
[    0.964354] usb usb2: SerialNumber: 0000:00:1d.7
[    0.965452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.965509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.965579] usb usb3: Product: UHCI Host Controller
[    0.965632] usb usb3: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.965688] usb usb3: SerialNumber: 0000:00:1a.0
[    0.966403] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.966460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.966530] usb usb4: Product: UHCI Host Controller
[    0.966583] usb usb4: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.966638] usb usb4: SerialNumber: 0000:00:1a.1
[    0.967340] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.967397] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.967467] usb usb5: Product: UHCI Host Controller
[    0.967520] usb usb5: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.967575] usb usb5: SerialNumber: 0000:00:1a.2
[    0.968296] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.968353] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.968423] usb usb6: Product: UHCI Host Controller
[    0.968476] usb usb6: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.968532] usb usb6: SerialNumber: 0000:00:1d.0
[    0.969241] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.969297] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.969368] usb usb7: Product: UHCI Host Controller
[    0.969421] usb usb7: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.969476] usb usb7: SerialNumber: 0000:00:1d.1
[    0.970179] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.970235] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.970306] usb usb8: Product: UHCI Host Controller
[    0.970358] usb usb8: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
[    0.970414] usb usb8: SerialNumber: 0000:00:1d.2
[    1.260016] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    1.393326] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
[    1.393385] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.393444] usb 1-5: Product: USB2.0 Hub
[    1.664016] usb 1-5.1: new full-speed USB device number 3 using ehci-pci
[    1.759826] usb 1-5.1: New USB device found, idVendor=24ae, idProduct=2003
[    1.759885] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.759957] usb 1-5.1: Product: RAPOO 5G Wireless Device
[    1.760019] usb 1-5.1: Manufacturer: RAPOO
[    1.770058] usbcore: registered new interface driver usbhid
[    1.770114] usbhid: USB HID core driver
[    1.771901] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/0003:24AE:2003.0001/input/input5
[    1.824131] hid-generic 0003:24AE:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1a.7-5.1/input0
[    1.824774] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.1/0003:24AE:2003.0002/input/input6
[    1.880214] hid-generic 0003:24AE:2003.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1a.7-5.1/input1
[  160.112025] usb 1-5.2: new full-speed USB device number 4 using ehci-pci
[  160.207998] usb 1-5.2: New USB device found, idVendor=2341, idProduct=0043
[  160.208023] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[  160.208027] usb 1-5.2: Manufacturer: Arduino (www.arduino.cc)
[  160.208029] usb 1-5.2: SerialNumber: 8563231393835110C100
[  160.736427] usbcore: registered new interface driver cdc_acm
------------------------------------------------------------------------------------
roberto@roberto-EP43-S3L:~$ ls -l /dev/ttyUSB*
ls: impossibile accedere a '/dev/ttyUSB*': File o directory non esistente
roberto@roberto-EP43-S3L:~$ 

La cartella/file -> ttyUSB* non esiste. C'è la catella -> usb con al suo interno il file -> hiddev0
Intato ti ringrazio della tua disponibilità!!!
Ti ivio anche il risultato di -> lsusb:

Codice: Seleziona tutto

roberto@roberto-EP43-S3L:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 2341:0043 Arduino SA Uno R3 (CDC ACM)
Bus 001 Device 003: ID 24ae:2003  
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
roberto@roberto-EP43-S3L:~$ 

[magozurlinux]

Prego, di nulla!

Non ci sto capendo più nulla!

Prima avevi questo:

Codice: Seleziona tutto

0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

ora hai questo:

Codice: Seleziona tutto

2341:0043 Arduino SA Uno R3 (CDC ACM)

[Roberto Pontecorvi]

Scusa hai ragione e che ho provato una altra scheda per vedere se era la scheda difettosa, la prima era -> Arduino diecimila. Tieni in considerazione -> Arduino uno R3. Comunque il difetto è su tutte e due. Ho provato anche con lubuntu su un'altro hdd ma stesso pc, stesso problema.

[magozurlinux]

Scusa hai ragione e che ho provato una altra scheda per vedere se era la scheda difettosa, la prima era -> Arduino diecimila. Tieni in considerazione -> Arduino uno R3. Comunque il difetto è su tutte e due. Ho provato anche con lubuntu su un'altro hdd ma stesso pc, stesso problema.

La porta seriale di quest'altro dispositivo Arduino è /dev/ttyACM0?