Richiesta login tty1 all' avvio

[bev200]

Buongiorno a tutti,

Sono nuovo di questo mondo e quindi saluto cordialmente tutti gli appartenenti al forum, spero di essere nella sezione giusta, in caso contrario perdonatemi e se necessario spostate pure.
Ho installato UBUNTU 13.10 in dual boot con W7 circa una settimana fa ed ho cominciato ad utilizzarlo cercando eventuali soluzioni qui sul forum.
Ho provveduto ad installare gli aggiornamenti e proprio dopo l'ultimo aggiornamento al riavvio mi viene richiesta la login al tty1, di cosa si tratta?
Se non faccio nulla la richiesta sparisce dopo circa un minuto ed il sistema si avvia normalmente o almeno credo, ma vorrei sapere se è corretto e se fosse eventualmente possibile in qualche modo
fargli saltare questa richiesta.
Grazie in anticipo.

[sbubba]

la tty1 è la shell che puoi aprire con control+alt+f1, classico schermo nero da cui digitare comandi :°D per tornare all'ambiente grafico si preme alt+f7 (o f8)
ma se si avvia normalmente non capisco perchè ti richiede il login lì. puoi postare cosa ti dice esattamente?

[bev200]

Dunque, questo è quanto succede:

-Avvio del PC
-Selezione di UBUNTU tramite GRUB

A questo punto lo schermo diventa nero, passa qualche secondo e compare il seguente messaggio:

Ubuntu 13.10 <nome-computer> tty1
<nome-computer> login:

passano trenta secondi ed il sistema completa l'avvio presentandomi il desktop.

[Innerina]

Esatto, anche a me chiede la stessa cosa, ho il dual boot con Seven. E' perfettamente normale, e se non sbaglio è considerabile anche come modalità d'emergenza, perché una volta usai quel login per risolvere problemi tramite comando (stile terminale).

[sbubba]

sì ma quella schermata la richiami quando vuoi tu con control+alt+f1, non la devi vedere e usare per forza prima del login grafico.

[bev200]

sì ma quella schermata la richiami quando vuoi tu con control+alt+f1, non la devi vedere e usare per forza prima del login grafico.

è esattamente quello che ho pensato anche io, ottimo che si possa usare in caso di emergenza ma che senso ha che si presenti all inizio di una sessione "normale"?

[GjMan78]

Evidentemente c'è qualcosa che ritarda il caricamento di lightdm.
Riavvia il pc e appena riesci a loggarti posta il risultato di

Codice: Seleziona tutto

dmesg

[sbubba]

che senso ha che si presenti all inizio di una sessione "normale"?

infatti non dovrebbe presentarsi in quel modo, segui quello che ha scritto GjMan78

[bev200]

Eccovi il risultato:

Codice: Seleziona tutto

[    0.125714] system 00:06: [io  0x0500-0x057f] could not be reserved
[    0.125716] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.125718] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.125720] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.125722] system 00:06: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.125725] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.125786] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.125836] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[    0.125887] system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
[    0.125890] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.126041] pnp 00:0a: [dma 0 disabled]
[    0.126091] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.126155] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.126157] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.126160] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.126202] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.126258] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.126260] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.126411] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.126414] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.126416] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.126418] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.126420] system 00:0e: [mem 0xe0000000-0xffffffff] could not be reserved
[    0.126422] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.126517] pnp: PnP ACPI: found 15 devices
[    0.126518] ACPI: bus type PNP unregistered
[    0.132659] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.132662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[    0.132669] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.132676] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.132685] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
[    0.132688] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.132690] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.132692] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.132693] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.132698] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[    0.132700] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.132702] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.132704] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.132707] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.132709] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.132712] pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfe9fffff]
[    0.132715] pci 0000:00:01.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.132718] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.132720] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.132724] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
[    0.132727] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.132731] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.132734] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.132737] pci 0000:00:1c.4:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.132740] pci 0000:00:1c.4:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.132745] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.132747] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.132751] pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.132754] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.132759] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.132830] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.132962] pci 0000:00:1e.0: setting latency timer to 64
[    0.132965] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.132967] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.132969] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.132970] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.132972] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.132974] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    0.132976] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.132977] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff]
[    0.132979] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.132981] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.132982] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc03fffff]
[    0.132984] pci_bus 0000:04: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.132986] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.132987] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.132989] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.132991] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.132992] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.132994] pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.132996] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.132998] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.132999] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.133001] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.133003] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.133004] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff]
[    0.133036] NET: Registered protocol family 2
[    0.133183] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.133389] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.133560] TCP: Hash tables configured (established 32768 bind 32768)
[    0.133597] TCP: reno registered
[    0.133603] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.133630] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.133700] NET: Registered protocol family 1
[    0.134503] pci 0000:01:00.0: Boot video device
[    0.134518] PCI: CLS 32 bytes, default 64
[    0.134564] Trying to unpack rootfs image as initramfs...
[    0.376475] Freeing initrd memory: 16904K (ffff880035eec000 - ffff880036f6e000)
[    0.376483] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.376486] software IO TLB [mem 0xbbf80000-0xbff80000] (64MB) mapped at [ffff8800bbf80000-ffff8800bff7ffff]
[    0.376628] Scanning for low memory corruption every 60 seconds
[    0.376860] Initialise module verification
[    0.376902] audit: initializing netlink socket (disabled)
[    0.376916] type=2000 audit(1385448235.376:1): initialized
[    0.400130] bounce pool size: 64 pages
[    0.400139] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.401307] zbud: loaded
[    0.401403] VFS: Disk quotas dquot_6.5.2
[    0.401439] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.401867] fuse init (API version 7.22)
[    0.401932] msgmni has been set to 7899
[    0.402276] Key type asymmetric registered
[    0.402278] Asymmetric key parser 'x509' registered
[    0.402304] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.402328] io scheduler noop registered
[    0.402330] io scheduler deadline registered (default)
[    0.402350] io scheduler cfq registered
[    0.402443] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.402486] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.402540] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.402590] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.402652] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.402663] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.402714] intel_idle: does not run on family 6 model 23
[    0.402778] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.402782] ACPI: Power Button [PWRB]
[    0.402813] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.402815] ACPI: Power Button [PWRF]
[    0.402905] GHES: HEST is not enabled!
[    0.402963] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.423308] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.424411] Linux agpgart interface v0.103
[    0.425500] brd: module loaded
[    0.426041] loop: module loaded
[    0.426124] ata_piix 0000:00:1f.2: version 2.13
[    0.426191] ata_piix 0000:00:1f.2: MAP [
[    0.426193]  P0 P2 P1 P3 ]
[    0.426226] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.426418] scsi0 : ata_piix
[    0.426762] scsi1 : ata_piix
[    0.427013] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.427016] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.427072] ata_piix 0000:00:1f.5: MAP [
[    0.427073]  P0 -- P1 -- ]
[    0.427097] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.427222] scsi2 : ata_piix
[    0.427535] scsi3 : ata_piix
[    0.427776] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.427779] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.428016] libphy: Fixed MDIO Bus: probed
[    0.428084] tun: Universal TUN/TAP device driver, 1.6
[    0.428085] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.428119] PPP generic driver version 2.4.2
[    0.428151] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.428152] ehci-pci: EHCI PCI platform driver
[    0.428213] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    0.428223] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.428228] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.428239] ehci-pci 0000:00:1a.7: debug port 1
[    0.432141] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.432152] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfcfffc00
[    0.444014] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.444037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.444040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.444042] usb usb1: Product: EHCI Host Controller
[    0.444045] usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[    0.444048] usb usb1: SerialNumber: 0000:00:1a.7
[    0.444142] hub 1-0:1.0: USB hub found
[    0.444146] hub 1-0:1.0: 6 ports detected
[    0.444289] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.444296] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.444302] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.444313] ehci-pci 0000:00:1d.7: debug port 1
[    0.448192] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.448203] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcfff800
[    0.460013] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.460044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.460047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460050] usb usb2: Product: EHCI Host Controller
[    0.460053] usb usb2: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[    0.460055] usb usb2: SerialNumber: 0000:00:1d.7
[    0.460145] hub 2-0:1.0: USB hub found
[    0.460149] hub 2-0:1.0: 6 ports detected
[    0.460235] ehci-platform: EHCI generic platform driver
[    0.460243] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.460245] ohci-platform: OHCI generic platform driver
[    0.460249] uhci_hcd: USB Universal Host Controller Interface driver
[    0.460306] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.460309] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.460313] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.460340] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.460365] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.460367] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460368] usb usb3: Product: UHCI Host Controller
[    0.460370] usb usb3: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.460371] usb usb3: SerialNumber: 0000:00:1a.0
[    0.460433] hub 3-0:1.0: USB hub found
[    0.460436] hub 3-0:1.0: 2 ports detected
[    0.460535] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.460538] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.460542] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.460568] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.460591] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.460593] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460594] usb usb4: Product: UHCI Host Controller
[    0.460596] usb usb4: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.460597] usb usb4: SerialNumber: 0000:00:1a.1
[    0.460658] hub 4-0:1.0: USB hub found
[    0.460661] hub 4-0:1.0: 2 ports detected
[    0.460761] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.460763] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.460769] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.460788] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.460811] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.460813] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460815] usb usb5: Product: UHCI Host Controller
[    0.460816] usb usb5: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.460818] usb usb5: SerialNumber: 0000:00:1a.2
[    0.460879] hub 5-0:1.0: USB hub found
[    0.460883] hub 5-0:1.0: 2 ports detected
[    0.460981] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.460983] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.460987] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.461006] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.461030] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.461032] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.461034] usb usb6: Product: UHCI Host Controller
[    0.461035] usb usb6: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.461037] usb usb6: SerialNumber: 0000:00:1d.0
[    0.461096] hub 6-0:1.0: USB hub found
[    0.461099] hub 6-0:1.0: 2 ports detected
[    0.461195] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.461198] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.461202] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.461221] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.461243] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.461245] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.461247] usb usb7: Product: UHCI Host Controller
[    0.461248] usb usb7: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.461250] usb usb7: SerialNumber: 0000:00:1d.1
[    0.461309] hub 7-0:1.0: USB hub found
[    0.461312] hub 7-0:1.0: 2 ports detected
[    0.461415] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.461418] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.461422] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.461440] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.461463] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.461465] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.461467] usb usb8: Product: UHCI Host Controller
[    0.461468] usb usb8: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.461470] usb usb8: SerialNumber: 0000:00:1d.2
[    0.461530] hub 8-0:1.0: USB hub found
[    0.461533] hub 8-0:1.0: 2 ports detected
[    0.461623] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.461624] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.462101] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.462179] mousedev: PS/2 mouse device common for all mice
[    0.462280] rtc_cmos 00:02: RTC can wake from S4
[    0.462377] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.462400] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.462452] device-mapper: uevent: version 1.0.3
[    0.462498] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.462504] cpuidle: using governor ladder
[    0.462505] cpuidle: using governor menu
[    0.462514] ledtrig-cpu: registered to indicate activity on CPUs
[    0.462581] TCP: cubic registered
[    0.462655] NET: Registered protocol family 10
[    0.462815] NET: Registered protocol family 17
[    0.462823] Key type dns_resolver registered
[    0.462986] PM: Hibernation image not present or could not be loaded.
[    0.462990] Loading module verification certificates
[    0.463810] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0d2f067ae81edbe7efb6ee2c61c63d9bdcf0659d'
[    0.463822] registered taskstats version 1
[    0.465815] Key type trusted registered
[    0.467275] Key type encrypted registered
[    0.468708] AppArmor: AppArmor sha1 policy hashing enabled
[    0.468992]   Magic number: 5:304:722
[    0.469016] block loop2: hash matches
[    0.469110] rtc_cmos 00:02: setting system clock to 2013-11-26 06:43:56 UTC (1385448236)
[    0.469163] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.469164] EDD information not available.
[    0.483978] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.754546] ata4: SATA link down (SStatus 0 SControl 300)
[    0.772017] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.904870] usb 2-1: New USB device found, idVendor=03f0, idProduct=c202
[    0.904874] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.904877] usb 2-1: Product: Photosmart 8200 series
[    0.904879] usb 2-1: Manufacturer: HP
[    0.904882] usb 2-1: SerialNumber: MY64K3W1CC04KN
[    0.908047] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.916371] ata3.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[    0.916375] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.932342] ata3.00: configured for UDMA/133
[    1.016023] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.074566] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.074576] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.153371] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
[    1.153375] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.153378] usb 2-2: Product: USB2.0 Hub
[    1.153650] hub 2-2:1.0: USB hub found
[    1.153996] hub 2-2:1.0: 4 ports detected
[    1.228061] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.228071] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.253464] ata1.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
[    1.253467] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.269264] ata1.00: configured for UDMA/133
[    1.269381] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
[    1.269488] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.269496] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.269554] sd 0:0:0:0: [sda] Write Protect is off
[    1.269556] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.269574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.269578] scsi 2:0:0:0: Direct-Access     ATA      ST31000524AS     JC4B PQ: 0 ANSI: 5
[    1.269678] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.269727] sd 2:0:0:0: [sdb] Write Protect is off
[    1.269729] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.269748] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.269828] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.303336]  sda: sda1 sda2 < sda5 sda6 >
[    1.303646] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.338272]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 >
[    1.338600] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.339499] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    1.339501] Write protecting the kernel read-only data: 12288k
[    1.341641] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[    1.343222] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[    1.352199] systemd-udevd[110]: starting version 204
[    1.371513] libahci: module verification failed: signature and/or required key missing - tainting kernel
[    1.371992] ahci 0000:03:00.0: version 3.0
[    1.376024] tsc: Refined TSC clocksource calibration: 3100.052 MHz
[    1.388073] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.388078] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.389871] scsi4 : ahci
[    1.391592] scsi5 : ahci
[    1.391656] ata5: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 16
[    1.391660] ata6: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 16
[    1.391725] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    1.391793] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.393895] scsi6 : pata_jmicron
[    1.394068] scsi7 : pata_jmicron
[    1.394187] ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
[    1.394189] ata8: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
[    1.413756] usb-storage 2-1:1.2: USB Mass Storage device detected
[    1.415132] scsi8 : usb-storage 2-1:1.2
[    1.415199] usbcore: registered new interface driver usb-storage
[    1.556543] ata7.00: ATAPI: PIONEER DVD-RW  DVR-112D, 1.09, max UDMA/66
[    1.556549] ata7.00: limited to UDMA/33 due to 40-wire cable
[    1.572544] ata7.00: configured for UDMA/33
[    1.652023] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[    1.708037] ata5: SATA link down (SStatus 0 SControl 300)
[    1.708072] ata6: SATA link down (SStatus 0 SControl 300)
[    1.713999] scsi 6:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-112D 1.09 PQ: 0 ANSI: 5
[    1.720284] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.720286] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.720374] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.720581] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    1.787762] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    1.787765] EXT4-fs (sda5): write access will be enabled during recovery
[    1.834482] usb 8-1: New USB device found, idVendor=046d, idProduct=c52f
[    1.834487] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.834490] usb 8-1: Product: USB Receiver
[    1.834493] usb 8-1: Manufacturer: Logitech
[    1.843180] hidraw: raw HID events driver (C) Jiri Kosina
[    1.848528] usbcore: registered new interface driver usbhid
[    1.848530] usbhid: USB HID core driver
[    1.850491] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[    1.850842] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[    1.854764] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[    1.855407] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[    2.040255] usb 2-2.2: new high-speed USB device number 5 using ehci-pci
[    2.132877] usb 2-2.2: New USB device found, idVendor=059f, idProduct=102a
[    2.132882] usb 2-2.2: New USB device strings: Mfr=10, Product=11, SerialNumber=5
[    2.132885] usb 2-2.2: Product: LaCie Device
[    2.132888] usb 2-2.2: Manufacturer: LaCie
[    2.132891] usb 2-2.2: SerialNumber: 090925FBC400
[    2.133404] usb-storage 2-2.2:1.0: USB Mass Storage device detected
[    2.133475] scsi9 : usb-storage 2-2.2:1.0
[    2.204254] usb 2-2.3: new high-speed USB device number 6 using ehci-pci
[    2.297251] usb 2-2.3: New USB device found, idVendor=05e3, idProduct=0608
[    2.297256] usb 2-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.297259] usb 2-2.3: Product: USB2.0 Hub
[    2.297659] hub 2-2.3:1.0: USB hub found
[    2.297998] hub 2-2.3:1.0: 4 ports detected
[    2.376079] Switched to clocksource tsc
[    2.412639] scsi 8:0:0:0: Direct-Access     HP       Photosmart 8200  1.00 PQ: 0 ANSI: 2
[    2.412874] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    2.414378] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    2.568246] usb 2-2.3.1: new high-speed USB device number 7 using ehci-pci
[    2.661370] usb 2-2.3.1: New USB device found, idVendor=058f, idProduct=6366
[    2.661374] usb 2-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.661377] usb 2-2.3.1: Product: Mass Storage Device
[    2.661379] usb 2-2.3.1: Manufacturer: Generic
[    2.661382] usb 2-2.3.1: SerialNumber: 058F63666433
[    2.661660] usb-storage 2-2.3.1:1.0: USB Mass Storage device detected
[    2.661726] scsi10 : usb-storage 2-2.3.1:1.0
[    2.687323] EXT4-fs (sda5): recovery complete
[    2.692760] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    3.174521] scsi 9:0:0:0: Direct-Access     Hitachi  HTS543232L9A300       PQ: 0 ANSI: 2 CCS
[    3.174763] sd 9:0:0:0: Attached scsi generic sg4 type 0
[    3.175380] sd 9:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.176378] sd 9:0:0:0: [sdd] Write Protect is off
[    3.176382] sd 9:0:0:0: [sdd] Mode Sense: 28 00 00 00
[    3.177375] sd 9:0:0:0: [sdd] No Caching mode page found
[    3.177378] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    3.180125] sd 9:0:0:0: [sdd] No Caching mode page found
[    3.180129] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    3.203522]  sdd: sdd1
[    3.206501] sd 9:0:0:0: [sdd] No Caching mode page found
[    3.206505] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    3.206509] sd 9:0:0:0: [sdd] Attached SCSI disk
[    3.660640] scsi 10:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    3.660849] sd 10:0:0:0: Attached scsi generic sg5 type 0
[    3.662126] sd 10:0:0:0: [sde] Attached SCSI removable disk
[   11.509196] Adding 4192252k swap on /dev/sda6.  Priority:-1 extents:1 across:4192252k FS
[   11.629261] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.705014] systemd-udevd[285]: starting version 204
[   11.816883] lp: driver loaded but no devices found
[   11.866759] [drm] Initialized drm 1.1.0 20060810
[   11.881018] nvidia: module license 'NVIDIA' taints kernel.
[   11.881023] Disabling lock debugging due to kernel taint
[   11.898942] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   11.899223] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[   11.899231] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  319.32  Wed Jun 19 15:51:20 PDT 2013
[   11.917241] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
[   11.917249] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.917251] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
[   11.917253] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.917254] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.960850] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60b
[   11.978597] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.998775] SKU: Nid=0x1d sku_cfg=0x4015e601
[   11.998778] SKU: port_connectivity=0x1
[   11.998779] SKU: enable_pcbeep=0x1
[   11.998780] SKU: check_sum=0x00000005
[   11.998781] SKU: customization=0x000000e6
[   11.998782] SKU: external_amp=0x0
[   11.998783] SKU: platform_type=0x0
[   11.998784] SKU: swap=0x0
[   11.998785] SKU: override=0x1
[   11.999223] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   11.999225]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.999226]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.999227]    mono: mono_out=0x0
[   11.999228]    dig-out=0x11/0x1e
[   11.999229]    inputs:
[   11.999230]      Front Mic=0x19
[   11.999232]      Rear Mic=0x18
[   11.999233]      Line=0x1a
[   11.999234] realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
[   11.999235] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
[   12.010812] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   12.010919] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   12.010999] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   12.011078] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   12.011157] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.011235] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.011582] hda_intel: Disabling MSI
[   12.011592] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   12.011618] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   12.014877] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   12.057482] type=1400 audit(1385444648.085:2): apparmor="STATUS" operation="profile_load" parent=319 profile="unconfined" name="/sbin/dhclient" pid=343 comm="apparmor_parser"
[   12.057488] type=1400 audit(1385444648.085:3): apparmor="STATUS" operation="profile_load" parent=319 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[   12.057492] type=1400 audit(1385444648.085:4): apparmor="STATUS" operation="profile_load" parent=319 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   12.057927] type=1400 audit(1385444648.085:5): apparmor="STATUS" operation="profile_replace" parent=319 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[   12.057933] type=1400 audit(1385444648.085:6): apparmor="STATUS" operation="profile_replace" parent=319 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   12.058166] type=1400 audit(1385444648.085:7): apparmor="STATUS" operation="profile_replace" parent=319 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   12.314008] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60b
[   12.318084] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.812115] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   12.812183] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   12.812233] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   12.812279] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   14.007172] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   14.125966] init: failsafe main process (593) killed by TERM signal
[   14.324550] Bluetooth: Core ver 2.16
[   14.324582] NET: Registered protocol family 31
[   14.324583] Bluetooth: HCI device and connection manager initialized
[   14.324592] Bluetooth: HCI socket layer initialized
[   14.324594] Bluetooth: L2CAP socket layer initialized
[   14.324599] Bluetooth: SCO socket layer initialized
[   14.335817] Bluetooth: RFCOMM TTY layer initialized
[   14.335829] Bluetooth: RFCOMM socket layer initialized
[   14.335831] Bluetooth: RFCOMM ver 1.11
[   14.338579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.338582] Bluetooth: BNEP filters: protocol multicast
[   14.338588] Bluetooth: BNEP socket layer initialized
[   14.426388] type=1400 audit(1385444650.453:8): apparmor="STATUS" operation="profile_load" parent=693 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=698 comm="apparmor_parser"
[   14.426396] type=1400 audit(1385444650.453:9): apparmor="STATUS" operation="profile_load" parent=693 profile="unconfined" name="chromium_browser" pid=698 comm="apparmor_parser"
[   14.426756] type=1400 audit(1385444650.453:10): apparmor="STATUS" operation="profile_replace" parent=693 profile="unconfined" name="chromium_browser" pid=698 comm="apparmor_parser"
[   14.429426] type=1400 audit(1385444650.457:11): apparmor="STATUS" operation="profile_load" parent=693 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=699 comm="apparmor_parser"
[   14.562088] init: avahi-cups-reload main process (711) terminated with status 1
[   14.573803] ppdev: user-space parallel port driver
[   15.939413] ATL1E 0000:02:00.0 eth0: NIC Link is Up <100 Mbps Full Duplex>
[   42.945790] WARNING! power/level is deprecated; use power/control instead
[   42.949317] usblp 2-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202
[   42.949369] usbcore: registered new interface driver usblp
[   42.988614] init: udev-fallback-graphics main process (1145) terminated with status 1
[   43.028996] init: plymouth-splash main process (1163) terminated with status 1
[  622.651076] audit_printk_skb: 162 callbacks suppressed
[  622.651080] type=1400 audit(1385445258.678:66): apparmor="STATUS" operation="profile_replace" parent=2368 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2372 comm="apparmor_parser"
[  622.651089] type=1400 audit(1385445258.678:67): apparmor="STATUS" operation="profile_replace" parent=2368 profile="unconfined" name="/usr/sbin/cupsd" pid=2372 comm="apparmor_parser"
[  622.651593] type=1400 audit(1385445258.678:68): apparmor="STATUS" operation="profile_replace" parent=2368 profile="unconfined" name="/usr/sbin/cupsd" pid=2372 comm="apparmor_parser"

Buona giornata

[GjMan78]

Sembra che il problema sia qui

Codice: Seleziona tutto

[   42.945790] WARNING! power/level is deprecated; use power/control instead
[   42.949317] usblp 2-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202

Se non sbaglio il modulo usblp fa parte di Cups ed è necessario per la stampa.
Hai una stampante collegata?Se si scollegala e riavvia, vediamo se il problema è questo.

[bev200]

Ho disconnesso la stampante , la richiesta di login è rimasta ma il tempo di attesa si è ridotto a circa 10 secondi contro i 30 di prima.
Allego nuovamente il risultato di dmesg:

Codice: Seleziona tutto

[    0.132734] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.132738] pci 0000:00:1c.4:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.132741] pci 0000:00:1c.4:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.132745] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.132748] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.132751] pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.132754] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.132759] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.132829] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.132961] pci 0000:00:1e.0: setting latency timer to 64
[    0.132965] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.132966] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.132968] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.132970] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.132971] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.132973] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    0.132975] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.132976] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff]
[    0.132978] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.132980] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.132982] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc03fffff]
[    0.132983] pci_bus 0000:04: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.132985] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.132987] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.132988] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.132990] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.132992] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.132993] pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.132995] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.132997] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.132998] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.133000] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.133002] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.133003] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff]
[    0.133034] NET: Registered protocol family 2
[    0.133182] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.133388] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.133559] TCP: Hash tables configured (established 32768 bind 32768)
[    0.133597] TCP: reno registered
[    0.133603] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.133630] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.133698] NET: Registered protocol family 1
[    0.134501] pci 0000:01:00.0: Boot video device
[    0.134516] PCI: CLS 32 bytes, default 64
[    0.134560] Trying to unpack rootfs image as initramfs...
[    0.376418] Freeing initrd memory: 16904K (ffff880035eec000 - ffff880036f6e000)
[    0.376426] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.376428] software IO TLB [mem 0xbbf80000-0xbff80000] (64MB) mapped at [ffff8800bbf80000-ffff8800bff7ffff]
[    0.376571] Scanning for low memory corruption every 60 seconds
[    0.376805] Initialise module verification
[    0.376847] audit: initializing netlink socket (disabled)
[    0.376861] type=2000 audit(1385534682.376:1): initialized
[    0.400068] bounce pool size: 64 pages
[    0.400084] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.401254] zbud: loaded
[    0.401348] VFS: Disk quotas dquot_6.5.2
[    0.401383] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.401812] fuse init (API version 7.22)
[    0.401874] msgmni has been set to 7899
[    0.402195] Key type asymmetric registered
[    0.402197] Asymmetric key parser 'x509' registered
[    0.402225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.402250] io scheduler noop registered
[    0.402252] io scheduler deadline registered (default)
[    0.402274] io scheduler cfq registered
[    0.402368] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.402411] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.402465] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.402515] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.402573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.402584] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.402635] intel_idle: does not run on family 6 model 23
[    0.402699] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.402703] ACPI: Power Button [PWRB]
[    0.402733] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.402735] ACPI: Power Button [PWRF]
[    0.402825] GHES: HEST is not enabled!
[    0.402884] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.423225] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.424317] Linux agpgart interface v0.103
[    0.425407] brd: module loaded
[    0.425935] loop: module loaded
[    0.426018] ata_piix 0000:00:1f.2: version 2.13
[    0.426084] ata_piix 0000:00:1f.2: MAP [
[    0.426086]  P0 P2 P1 P3 ]
[    0.426119] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.426311] scsi0 : ata_piix
[    0.426657] scsi1 : ata_piix
[    0.426908] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.426912] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.426967] ata_piix 0000:00:1f.5: MAP [
[    0.426969]  P0 -- P1 -- ]
[    0.426992] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.427115] scsi2 : ata_piix
[    0.427431] scsi3 : ata_piix
[    0.427673] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.427676] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.427897] libphy: Fixed MDIO Bus: probed
[    0.427967] tun: Universal TUN/TAP device driver, 1.6
[    0.427968] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.428016] PPP generic driver version 2.4.2
[    0.428048] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.428049] ehci-pci: EHCI PCI platform driver
[    0.428111] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    0.428120] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.428125] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.428136] ehci-pci 0000:00:1a.7: debug port 1
[    0.432035] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.432047] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfcfffc00
[    0.444014] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.444036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.444040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.444042] usb usb1: Product: EHCI Host Controller
[    0.444045] usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[    0.444047] usb usb1: SerialNumber: 0000:00:1a.7
[    0.444142] hub 1-0:1.0: USB hub found
[    0.444146] hub 1-0:1.0: 6 ports detected
[    0.444290] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.444296] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.444300] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.444312] ehci-pci 0000:00:1d.7: debug port 1
[    0.448207] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.448220] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcfff800
[    0.460013] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.460044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.460048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460050] usb usb2: Product: EHCI Host Controller
[    0.460053] usb usb2: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[    0.460055] usb usb2: SerialNumber: 0000:00:1d.7
[    0.460143] hub 2-0:1.0: USB hub found
[    0.460146] hub 2-0:1.0: 6 ports detected
[    0.460232] ehci-platform: EHCI generic platform driver
[    0.460238] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.460240] ohci-platform: OHCI generic platform driver
[    0.460245] uhci_hcd: USB Universal Host Controller Interface driver
[    0.460300] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.460303] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.460307] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.460334] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.460357] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.460359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460361] usb usb3: Product: UHCI Host Controller
[    0.460362] usb usb3: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.460364] usb usb3: SerialNumber: 0000:00:1a.0
[    0.460424] hub 3-0:1.0: USB hub found
[    0.460427] hub 3-0:1.0: 2 ports detected
[    0.460526] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.460529] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.460533] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.460560] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.460583] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.460584] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460586] usb usb4: Product: UHCI Host Controller
[    0.460588] usb usb4: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.460589] usb usb4: SerialNumber: 0000:00:1a.1
[    0.460648] hub 4-0:1.0: USB hub found
[    0.460651] hub 4-0:1.0: 2 ports detected
[    0.460751] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.460753] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.460758] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.460776] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.460800] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.460802] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460804] usb usb5: Product: UHCI Host Controller
[    0.460805] usb usb5: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.460807] usb usb5: SerialNumber: 0000:00:1a.2
[    0.460868] hub 5-0:1.0: USB hub found
[    0.460871] hub 5-0:1.0: 2 ports detected
[    0.460970] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.460972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.460976] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.460997] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.461022] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.461024] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.461025] usb usb6: Product: UHCI Host Controller
[    0.461027] usb usb6: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.461028] usb usb6: SerialNumber: 0000:00:1d.0
[    0.461089] hub 6-0:1.0: USB hub found
[    0.461092] hub 6-0:1.0: 2 ports detected
[    0.461189] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.461192] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.461196] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.461215] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.461237] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.461239] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.461240] usb usb7: Product: UHCI Host Controller
[    0.461242] usb usb7: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.461243] usb usb7: SerialNumber: 0000:00:1d.1
[    0.461304] hub 7-0:1.0: USB hub found
[    0.461307] hub 7-0:1.0: 2 ports detected
[    0.461409] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.461412] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.461416] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.461435] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.461457] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.461459] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.461461] usb usb8: Product: UHCI Host Controller
[    0.461462] usb usb8: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
[    0.461464] usb usb8: SerialNumber: 0000:00:1d.2
[    0.461530] hub 8-0:1.0: USB hub found
[    0.461533] hub 8-0:1.0: 2 ports detected
[    0.461624] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.461625] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.462152] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.462227] mousedev: PS/2 mouse device common for all mice
[    0.462323] rtc_cmos 00:02: RTC can wake from S4
[    0.462419] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.462440] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.462491] device-mapper: uevent: version 1.0.3
[    0.462538] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.462544] cpuidle: using governor ladder
[    0.462545] cpuidle: using governor menu
[    0.462553] ledtrig-cpu: registered to indicate activity on CPUs
[    0.462619] TCP: cubic registered
[    0.462694] NET: Registered protocol family 10
[    0.462857] NET: Registered protocol family 17
[    0.462865] Key type dns_resolver registered
[    0.463022] PM: Hibernation image not present or could not be loaded.
[    0.463025] Loading module verification certificates
[    0.463848] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0d2f067ae81edbe7efb6ee2c61c63d9bdcf0659d'
[    0.463860] registered taskstats version 1
[    0.465862] Key type trusted registered
[    0.467323] Key type encrypted registered
[    0.468750] AppArmor: AppArmor sha1 policy hashing enabled
[    0.469032]   Magic number: 5:379:722
[    0.469057] block loop2: hash matches
[    0.469150] rtc_cmos 00:02: setting system clock to 2013-11-27 06:44:43 UTC (1385534683)
[    0.469201] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.469203] EDD information not available.
[    0.484092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.754544] ata4: SATA link down (SStatus 0 SControl 300)
[    0.772016] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    0.905387] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
[    0.905391] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    0.905394] usb 2-2: Product: USB2.0 Hub
[    0.905795] hub 2-2:1.0: USB hub found
[    0.906136] hub 2-2:1.0: 4 ports detected
[    0.908049] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.916357] ata3.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[    0.916360] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.932344] ata3.00: configured for UDMA/133
[    1.082561] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.082571] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.236060] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.236070] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.261798] ata1.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
[    1.261801] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.268950] ata1.00: configured for UDMA/133
[    1.269063] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
[    1.269162] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.269166] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.269214] sd 0:0:0:0: [sda] Write Protect is off
[    1.269216] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.269235] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.269242] scsi 2:0:0:0: Direct-Access     ATA      ST31000524AS     JC4B PQ: 0 ANSI: 5
[    1.269341] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.269343] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.269384] sd 2:0:0:0: [sdb] Write Protect is off
[    1.269386] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.269404] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.303370]  sda: sda1 sda2 < sda5 sda6 >
[    1.303681] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.339339]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 >
[    1.339675] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.340568] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    1.340570] Write protecting the kernel read-only data: 12288k
[    1.342671] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[    1.344267] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[    1.353181] systemd-udevd[111]: starting version 204
[    1.369953] libahci: module verification failed: signature and/or required key missing - tainting kernel
[    1.370416] ahci 0000:03:00.0: version 3.0
[    1.376022] tsc: Refined TSC clocksource calibration: 3100.052 MHz
[    1.384145] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.384150] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.384441] scsi4 : ahci
[    1.384623] scsi5 : ahci
[    1.384672] ata5: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 16
[    1.384675] ata6: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 16
[    1.384718] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    1.384785] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.385189] scsi6 : pata_jmicron
[    1.385384] scsi7 : pata_jmicron
[    1.385499] ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
[    1.385501] ata8: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
[    1.404025] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[    1.548627] ata7.00: ATAPI: PIONEER DVD-RW  DVR-112D, 1.09, max UDMA/66
[    1.548632] ata7.00: limited to UDMA/33 due to 40-wire cable
[    1.564576] ata7.00: configured for UDMA/33
[    1.586468] usb 8-1: New USB device found, idVendor=046d, idProduct=c52f
[    1.586473] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.586476] usb 8-1: Product: USB Receiver
[    1.586478] usb 8-1: Manufacturer: Logitech
[    1.595273] hidraw: raw HID events driver (C) Jiri Kosina
[    1.600529] usbcore: registered new interface driver usbhid
[    1.600532] usbhid: USB HID core driver
[    1.601962] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[    1.602059] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[    1.604521] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[    1.604639] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[    1.704039] ata5: SATA link down (SStatus 0 SControl 300)
[    1.704075] ata6: SATA link down (SStatus 0 SControl 300)
[    1.710238] scsi 6:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-112D 1.09 PQ: 0 ANSI: 5
[    1.716594] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.716597] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.716714] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.716795] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    1.792272] usb 2-2.3: new high-speed USB device number 4 using ehci-pci
[    1.796152] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    1.796154] EXT4-fs (sda5): write access will be enabled during recovery
[    1.885387] usb 2-2.3: New USB device found, idVendor=05e3, idProduct=0608
[    1.885391] usb 2-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.885393] usb 2-2.3: Product: USB2.0 Hub
[    1.885785] hub 2-2.3:1.0: USB hub found
[    1.886134] hub 2-2.3:1.0: 4 ports detected
[    2.156268] usb 2-2.3.1: new high-speed USB device number 5 using ehci-pci
[    2.249264] usb 2-2.3.1: New USB device found, idVendor=058f, idProduct=6366
[    2.249268] usb 2-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.249271] usb 2-2.3.1: Product: Mass Storage Device
[    2.249274] usb 2-2.3.1: Manufacturer: Generic
[    2.249276] usb 2-2.3.1: SerialNumber: 058F63666433
[    2.250302] usb-storage 2-2.3.1:1.0: USB Mass Storage device detected
[    2.250366] scsi8 : usb-storage 2-2.3.1:1.0
[    2.250421] usbcore: registered new interface driver usb-storage
[    2.376058] Switched to clocksource tsc
[    2.380331] EXT4-fs (sda5): recovery complete
[    2.385766] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    3.248657] scsi 8:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    3.248870] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    3.250144] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[   11.180702] Adding 4192252k swap on /dev/sda6.  Priority:-1 extents:1 across:4192252k FS
[   11.264120] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.331238] systemd-udevd[282]: starting version 204
[   11.460881] lp: driver loaded but no devices found
[   11.482391] [drm] Initialized drm 1.1.0 20060810
[   11.494366] nvidia: module license 'NVIDIA' taints kernel.
[   11.494371] Disabling lock debugging due to kernel taint
[   11.512529] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   11.513118] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[   11.513126] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  319.32  Wed Jun 19 15:51:20 PDT 2013
[   11.562446] type=1400 audit(1385531094.590:2): apparmor="STATUS" operation="profile_load" parent=322 profile="unconfined" name="/sbin/dhclient" pid=331 comm="apparmor_parser"
[   11.562453] type=1400 audit(1385531094.590:3): apparmor="STATUS" operation="profile_load" parent=322 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=331 comm="apparmor_parser"
[   11.562457] type=1400 audit(1385531094.590:4): apparmor="STATUS" operation="profile_load" parent=322 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=331 comm="apparmor_parser"
[   11.562905] type=1400 audit(1385531094.590:5): apparmor="STATUS" operation="profile_replace" parent=322 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=331 comm="apparmor_parser"
[   11.562911] type=1400 audit(1385531094.590:6): apparmor="STATUS" operation="profile_replace" parent=322 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=331 comm="apparmor_parser"
[   11.563148] type=1400 audit(1385531094.590:7): apparmor="STATUS" operation="profile_replace" parent=322 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=331 comm="apparmor_parser"
[   11.575059] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
[   11.575066] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.575067] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
[   11.575070] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.575071] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.617756] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60b
[   11.621729] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.633745] SKU: Nid=0x1d sku_cfg=0x4015e601
[   11.633748] SKU: port_connectivity=0x1
[   11.633749] SKU: enable_pcbeep=0x1
[   11.633750] SKU: check_sum=0x00000005
[   11.633751] SKU: customization=0x000000e6
[   11.633752] SKU: external_amp=0x0
[   11.633753] SKU: platform_type=0x0
[   11.633753] SKU: swap=0x0
[   11.633754] SKU: override=0x1
[   11.634207] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   11.634208]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.634209]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.634210]    mono: mono_out=0x0
[   11.634211]    dig-out=0x11/0x1e
[   11.634212]    inputs:
[   11.634214]      Front Mic=0x19
[   11.634215]      Rear Mic=0x18
[   11.634216]      Line=0x1a
[   11.634217] realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
[   11.634219] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
[   11.658289] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   11.658412] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   11.658489] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.658567] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.658644] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.658719] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.659055] hda_intel: Disabling MSI
[   11.659065] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   11.659092] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   11.662356] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   11.856228] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60b
[   11.858891] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.291734] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   12.388554] init: failsafe main process (569) killed by TERM signal
[   12.484110] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   12.484274] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   12.484381] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   12.484484] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   12.553906] Bluetooth: Core ver 2.16
[   12.553926] NET: Registered protocol family 31
[   12.553927] Bluetooth: HCI device and connection manager initialized
[   12.553935] Bluetooth: HCI socket layer initialized
[   12.553937] Bluetooth: L2CAP socket layer initialized
[   12.553942] Bluetooth: SCO socket layer initialized
[   12.556903] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.556905] Bluetooth: BNEP filters: protocol multicast
[   12.556914] Bluetooth: BNEP socket layer initialized
[   12.562825] Bluetooth: RFCOMM TTY layer initialized
[   12.562838] Bluetooth: RFCOMM socket layer initialized
[   12.562840] Bluetooth: RFCOMM ver 1.11
[   12.658699] type=1400 audit(1385531095.686:8): apparmor="STATUS" operation="profile_load" parent=671 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=677 comm="apparmor_parser"
[   12.658706] type=1400 audit(1385531095.686:9): apparmor="STATUS" operation="profile_load" parent=671 profile="unconfined" name="chromium_browser" pid=677 comm="apparmor_parser"
[   12.659065] type=1400 audit(1385531095.686:10): apparmor="STATUS" operation="profile_replace" parent=671 profile="unconfined" name="chromium_browser" pid=677 comm="apparmor_parser"
[   12.661797] type=1400 audit(1385531095.690:11): apparmor="STATUS" operation="profile_load" parent=671 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=676 comm="apparmor_parser"
[   12.933979] init: avahi-cups-reload main process (716) terminated with status 1
[   12.946258] ppdev: user-space parallel port driver
[   13.864770] init: udev-fallback-graphics main process (925) terminated with status 1
[   14.619777] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.619969] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.621919] ATL1E 0000:02:00.0 eth0: NIC Link is Up <100 Mbps Full Duplex>
[   14.621933] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

ho anche notato che alla chiusura della sessione prima dello spegnimento del PC compaiono alcune scritte sullo sfondo ma sono veloci a sparire e non sono riuscito a leggerle, se esiste
un modo per congelare il video il tempo necessario a prendere nota fatemelo sapere, magari possono tornare utili.
Come tentativo finale si potrebbe anche pensare di formattare e reinstallare, UBUNTU è installato da pochi giorni ed è praticamente pulito eventualmente scaricando una nuova immagine.
Magari questo risolve il problema però non sarebbe di grande aiuto per altri che dovessero incorrere in questa problematica in quanto non se ne conoscerebbe il motivo o almeno credo.

Buona giornata

[GjMan78]

In questo secondo log non vedo nulla che giustifichi un ritardo nella partenza del desktop manager.

Che stampante hai? Forse installando i driver dal sito del produttore può aiutarci a risolvere il problema.

[bev200]

la stampante è una HP photosmart 8250, modello sicuramente non recente.

edit: ho scaricato dal sito di HP i driver per UBUNTU, spero siano quelli corretti.

[bev200]

installando i driver di HP la situazione è tornata quella precedente, che dite se provassi la soluzione di reinstallare tutto?

[GjMan78]

Puoi anche provare ma sono certo che il problema si ripresenterà.

[bev200]

ed effettivamente il problema si è ripresentato ma credo, come già visto prima, che il problema sia proprio la stampante, eccovi in sintesi
la sequenza di operazioni effettuate:

1) formattazione partizioni e reinstallazione da zero, ad operazione conclusa il problema non si presenta
2) Installazione aggiornamenti, vari riavvii ed il problema non si presenta.
3) Installazione driver proprietari Nvidia per scheda GT630, riavvio ed il problema non si presenta.
4) Inserisco la USB della stampante, la accendo, viene riconosciuta nel senso che se apro un documento e chiedo di stampare la vede ma....ecco che al riavvio il problema
si ripropone, che sia un problema di driver? o forse la mia HP8250 è "strana" per quanto riguarda il mondo LINUX?.

Allego nuovamente il risultato di dmesg anche se non credo possa essere di grande aiuto:

Codice: Seleziona tutto

input/input0
[    0.402250] ACPI: Power Button [PWRB]
[    0.402281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.402283] ACPI: Power Button [PWRF]
[    0.402374] GHES: HEST is not enabled!
[    0.402433] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.422775] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.423866] Linux agpgart interface v0.103
[    0.424962] brd: module loaded
[    0.425502] loop: module loaded
[    0.425585] ata_piix 0000:00:1f.2: version 2.13
[    0.425652] ata_piix 0000:00:1f.2: MAP [
[    0.425653]  P0 P2 P1 P3 ]
[    0.425686] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.425877] scsi0 : ata_piix
[    0.426221] scsi1 : ata_piix
[    0.426469] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.426473] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.426528] ata_piix 0000:00:1f.5: MAP [
[    0.426529]  P0 -- P1 -- ]
[    0.426553] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.426677] scsi2 : ata_piix
[    0.426988] scsi3 : ata_piix
[    0.427227] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.427230] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.427456] libphy: Fixed MDIO Bus: probed
[    0.427523] tun: Universal TUN/TAP device driver, 1.6
[    0.427524] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.427561] PPP generic driver version 2.4.2
[    0.427594] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.427595] ehci-pci: EHCI PCI platform driver
[    0.427657] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    0.427666] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.427671] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.427682] ehci-pci 0000:00:1a.7: debug port 1
[    0.431588] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.431600] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfcfffc00
[    0.440013] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.440036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.440040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.440042] usb usb1: Product: EHCI Host Controller
[    0.440045] usb usb1: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
[    0.440047] usb usb1: SerialNumber: 0000:00:1a.7
[    0.440143] hub 1-0:1.0: USB hub found
[    0.440147] hub 1-0:1.0: 6 ports detected
[    0.440290] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.440297] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.440302] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.440313] ehci-pci 0000:00:1d.7: debug port 1
[    0.444194] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.444204] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcfff800
[    0.456013] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.456044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.456047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.456050] usb usb2: Product: EHCI Host Controller
[    0.456052] usb usb2: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
[    0.456055] usb usb2: SerialNumber: 0000:00:1d.7
[    0.456145] hub 2-0:1.0: USB hub found
[    0.456149] hub 2-0:1.0: 6 ports detected
[    0.456234] ehci-platform: EHCI generic platform driver
[    0.456239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.456241] ohci-platform: OHCI generic platform driver
[    0.456248] uhci_hcd: USB Universal Host Controller Interface driver
[    0.456305] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.456307] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.456311] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.456338] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.456363] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.456365] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.456367] usb usb3: Product: UHCI Host Controller
[    0.456368] usb usb3: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[    0.456370] usb usb3: SerialNumber: 0000:00:1a.0
[    0.456431] hub 3-0:1.0: USB hub found
[    0.456435] hub 3-0:1.0: 2 ports detected
[    0.456534] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.456537] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.456541] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.456566] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.456589] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.456591] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.456593] usb usb4: Product: UHCI Host Controller
[    0.456594] usb usb4: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[    0.456596] usb usb4: SerialNumber: 0000:00:1a.1
[    0.456656] hub 4-0:1.0: USB hub found
[    0.456659] hub 4-0:1.0: 2 ports detected
[    0.456759] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.456762] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.456768] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.456786] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.456810] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.456812] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.456814] usb usb5: Product: UHCI Host Controller
[    0.456815] usb usb5: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[    0.456817] usb usb5: SerialNumber: 0000:00:1a.2
[    0.456878] hub 5-0:1.0: USB hub found
[    0.456881] hub 5-0:1.0: 2 ports detected
[    0.456978] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.456981] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.456985] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.457004] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.457028] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.457030] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.457032] usb usb6: Product: UHCI Host Controller
[    0.457034] usb usb6: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[    0.457035] usb usb6: SerialNumber: 0000:00:1d.0
[    0.457094] hub 6-0:1.0: USB hub found
[    0.457097] hub 6-0:1.0: 2 ports detected
[    0.457194] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.457196] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.457200] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.457219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.457242] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.457244] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.457245] usb usb7: Product: UHCI Host Controller
[    0.457247] usb usb7: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[    0.457248] usb usb7: SerialNumber: 0000:00:1d.1
[    0.457308] hub 7-0:1.0: USB hub found
[    0.457311] hub 7-0:1.0: 2 ports detected
[    0.457413] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.457416] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.457420] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.457439] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.457461] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.457463] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.457465] usb usb8: Product: UHCI Host Controller
[    0.457466] usb usb8: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[    0.457468] usb usb8: SerialNumber: 0000:00:1d.2
[    0.457528] hub 8-0:1.0: USB hub found
[    0.457531] hub 8-0:1.0: 2 ports detected
[    0.457620] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.457622] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.458149] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.458226] mousedev: PS/2 mouse device common for all mice
[    0.458327] rtc_cmos 00:02: RTC can wake from S4
[    0.458424] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.458446] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.458498] device-mapper: uevent: version 1.0.3
[    0.458544] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.458549] cpuidle: using governor ladder
[    0.458551] cpuidle: using governor menu
[    0.458561] ledtrig-cpu: registered to indicate activity on CPUs
[    0.458628] TCP: cubic registered
[    0.458702] NET: Registered protocol family 10
[    0.458862] NET: Registered protocol family 17
[    0.458870] Key type dns_resolver registered
[    0.459031] PM: Hibernation image not present or could not be loaded.
[    0.459034] Loading module verification certificates
[    0.459855] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4f57df1a3429640d83ffde722907e1377213486f'
[    0.459867] registered taskstats version 1
[    0.461879] Key type trusted registered
[    0.463351] Key type encrypted registered
[    0.464786] AppArmor: AppArmor sha1 policy hashing enabled
[    0.465065]   Magic number: 5:140:634
[    0.465181] rtc_cmos 00:02: setting system clock to 2013-11-30 12:37:13 UTC (1385815033)
[    0.465235] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.465236] EDD information not available.
[    0.479538] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.754616] ata4: SATA link down (SStatus 0 SControl 300)
[    0.768017] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.900050] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.900874] usb 2-1: New USB device found, idVendor=03f0, idProduct=c202
[    0.900878] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.900881] usb 2-1: Product: Photosmart 8200 series
[    0.900883] usb 2-1: Manufacturer: HP
[    0.900886] usb 2-1: SerialNumber: MY64K3W1CC04KN
[    0.908374] ata3.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[    0.908378] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.924346] ata3.00: configured for UDMA/133
[    1.012016] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.074561] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.074571] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.153248] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
[    1.153252] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.153255] usb 2-2: Product: USB2.0 Hub
[    1.153528] hub 2-2:1.0: USB hub found
[    1.153872] hub 2-2:1.0: 4 ports detected
[    1.228060] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.228071] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.255247] ata1.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
[    1.255251] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.268455] ata1.00: configured for UDMA/133
[    1.268569] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
[    1.268668] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.268671] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.268712] sd 0:0:0:0: [sda] Write Protect is off
[    1.268715] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.268733] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.268751] scsi 2:0:0:0: Direct-Access     ATA      ST31000524AS     JC4B PQ: 0 ANSI: 5
[    1.268829] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.268859] sd 2:0:0:0: [sdb] Write Protect is off
[    1.268861] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.268876] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.269045] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.289643]  sda: sda1 sda2 sda3 sda4
[    1.289956] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.329493]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 >
[    1.329768] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.330657] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    1.330659] Write protecting the kernel read-only data: 12288k
[    1.332764] Freeing unused kernel memory: 1036K (ffff8800016fd000 - ffff880001800000)
[    1.334345] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[    1.343340] systemd-udevd[111]: starting version 204
[    1.362303] libahci: module verification failed: signature and/or required key missing - tainting kernel
[    1.362771] ahci 0000:03:00.0: version 3.0
[    1.376021] tsc: Refined TSC clocksource calibration: 3100.052 MHz
[    1.376093] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.376096] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.376718] scsi4 : ahci
[    1.379137] scsi5 : ahci
[    1.379199] ata5: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 16
[    1.379202] ata6: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 16
[    1.379404] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    1.379473] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.379839] scsi6 : pata_jmicron
[    1.380149] scsi7 : pata_jmicron
[    1.380275] ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
[    1.380277] ata8: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
[    1.413116] usb-storage 2-1:1.2: USB Mass Storage device detected
[    1.413246] scsi8 : usb-storage 2-1:1.2
[    1.413301] usbcore: registered new interface driver usb-storage
[    1.544541] ata7.00: ATAPI: PIONEER DVD-RW  DVR-112D, 1.09, max UDMA/66
[    1.544546] ata7.00: limited to UDMA/33 due to 40-wire cable
[    1.560525] ata7.00: configured for UDMA/33
[    1.652020] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[    1.696036] ata5: SATA link down (SStatus 0 SControl 300)
[    1.696071] ata6: SATA link down (SStatus 0 SControl 300)
[    1.702608] scsi 6:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-112D 1.09 PQ: 0 ANSI: 5
[    1.708966] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.708970] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.709076] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.709270] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    1.829994] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[    1.829997] EXT4-fs (sda3): write access will be enabled during recovery
[    1.834476] usb 8-1: New USB device found, idVendor=046d, idProduct=c52f
[    1.834480] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.834483] usb 8-1: Product: USB Receiver
[    1.834486] usb 8-1: Manufacturer: Logitech
[    1.843085] hidraw: raw HID events driver (C) Jiri Kosina
[    1.848532] usbcore: registered new interface driver usbhid
[    1.848534] usbhid: USB HID core driver
[    1.849912] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[    1.849993] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[    1.852569] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[    1.852646] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[    2.044259] usb 2-2.1: new high-speed USB device number 5 using ehci-pci
[    2.141378] usb 2-2.1: New USB device found, idVendor=1234, idProduct=ffff
[    2.141383] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.141386] usb 2-2.1: Product: Flash Disk
[    2.141389] usb 2-2.1: Manufacturer: USB2.0
[    2.141392] usb 2-2.1: SerialNumber: 9BC50600C56104FF
[    2.141659] usb-storage 2-2.1:1.0: USB Mass Storage device detected
[    2.141742] scsi9 : usb-storage 2-2.1:1.0
[    2.212260] usb 2-2.2: new high-speed USB device number 6 using ehci-pci
[    2.304874] usb 2-2.2: New USB device found, idVendor=059f, idProduct=102a
[    2.304879] usb 2-2.2: New USB device strings: Mfr=10, Product=11, SerialNumber=5
[    2.304882] usb 2-2.2: Product: LaCie Device
[    2.304885] usb 2-2.2: Manufacturer: LaCie
[    2.304887] usb 2-2.2: SerialNumber: 090925FBC400
[    2.305401] usb-storage 2-2.2:1.0: USB Mass Storage device detected
[    2.305479] scsi10 : usb-storage 2-2.2:1.0
[    2.376068] Switched to clocksource tsc
[    2.376247] usb 2-2.3: new high-speed USB device number 7 using ehci-pci
[    2.412514] scsi 8:0:0:0: Direct-Access     HP       Photosmart 8200  1.00 PQ: 0 ANSI: 2
[    2.412723] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    2.414128] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    2.469250] usb 2-2.3: New USB device found, idVendor=05e3, idProduct=0608
[    2.469256] usb 2-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.469259] usb 2-2.3: Product: USB2.0 Hub
[    2.469661] hub 2-2.3:1.0: USB hub found
[    2.469997] hub 2-2.3:1.0: 4 ports detected
[    2.740249] usb 2-2.3.1: new high-speed USB device number 8 using ehci-pci
[    2.833372] usb 2-2.3.1: New USB device found, idVendor=058f, idProduct=6366
[    2.833376] usb 2-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.833378] usb 2-2.3.1: Product: Mass Storage Device
[    2.833381] usb 2-2.3.1: Manufacturer: Generic
[    2.833384] usb 2-2.3.1: SerialNumber: 058F63666433
[    2.833644] usb-storage 2-2.3.1:1.0: USB Mass Storage device detected
[    2.833701] scsi11 : usb-storage 2-2.3.1:1.0
[    2.904248] usb 2-2.3.2: new full-speed USB device number 9 using ehci-pci
[    2.999371] usb 2-2.3.2: New USB device found, idVendor=06a3, idProduct=075c
[    2.999375] usb 2-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.999378] usb 2-2.3.2: Product: Saitek X52 Flight Control System
[    2.999380] usb 2-2.3.2: Manufacturer: Saitek
[    3.001317] input: Saitek Saitek X52 Flight Control System as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.3/2-2.3.2/2-2.3.2:1.0/input/input5
[    3.001395] hid-generic 0003:06A3:075C.0003: input,hidraw2: USB HID v1.11 Joystick [Saitek Saitek X52 Flight Control System] on usb-0000:00:1d.7-2.3.2/input0
[    3.101013] EXT4-fs (sda3): recovery complete
[    3.106715] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.141517] scsi 9:0:0:0: Direct-Access     USB2.0   Flash Disk       PMAP PQ: 0 ANSI: 4
[    3.141734] sd 9:0:0:0: Attached scsi generic sg4 type 0
[    3.142633] sd 9:0:0:0: [sdd] 1974272 512-byte logical blocks: (1.01 GB/964 MiB)
[    3.143252] sd 9:0:0:0: [sdd] Write Protect is off
[    3.143257] sd 9:0:0:0: [sdd] Mode Sense: 23 00 00 00
[    3.143878] sd 9:0:0:0: [sdd] No Caching mode page found
[    3.143882] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    3.147378] sd 9:0:0:0: [sdd] No Caching mode page found
[    3.147381] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    3.149393]  sdd:
[    3.151877] sd 9:0:0:0: [sdd] No Caching mode page found
[    3.151880] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    3.151884] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[    3.346395] scsi 10:0:0:0: Direct-Access     Hitachi  HTS543232L9A300       PQ: 0 ANSI: 2 CCS
[    3.346604] sd 10:0:0:0: Attached scsi generic sg5 type 0
[    3.347133] sd 10:0:0:0: [sde] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.348127] sd 10:0:0:0: [sde] Write Protect is off
[    3.348131] sd 10:0:0:0: [sde] Mode Sense: 28 00 00 00
[    3.349126] sd 10:0:0:0: [sde] No Caching mode page found
[    3.349129] sd 10:0:0:0: [sde] Assuming drive cache: write through
[    3.351876] sd 10:0:0:0: [sde] No Caching mode page found
[    3.351879] sd 10:0:0:0: [sde] Assuming drive cache: write through
[    3.370271]  sde: sde1
[    3.373252] sd 10:0:0:0: [sde] No Caching mode page found
[    3.373256] sd 10:0:0:0: [sde] Assuming drive cache: write through
[    3.373259] sd 10:0:0:0: [sde] Attached SCSI disk
[    3.832643] scsi 11:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    3.832851] sd 11:0:0:0: Attached scsi generic sg6 type 0
[    3.834128] sd 11:0:0:0: [sdf] Attached SCSI removable disk
[   10.317989] Adding 3891196k swap on /dev/sda2.  Priority:-1 extents:1 across:3891196k FS
[   10.468058] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.515478] systemd-udevd[288]: starting version 204
[   10.744904] lp: driver loaded but no devices found
[   10.827521] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
[   10.827527] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.827529] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
[   10.827532] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.827533] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.845105] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   10.868432] SKU: Nid=0x1d sku_cfg=0x4015e601
[   10.868436] SKU: port_connectivity=0x1
[   10.868437] SKU: enable_pcbeep=0x1
[   10.868438] SKU: check_sum=0x00000005
[   10.868439] SKU: customization=0x000000e6
[   10.868440] SKU: external_amp=0x0
[   10.868441] SKU: platform_type=0x0
[   10.868442] SKU: swap=0x0
[   10.868442] SKU: override=0x1
[   10.868884] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   10.868886]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.868887]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.868888]    mono: mono_out=0x0
[   10.868889]    dig-out=0x11/0x1e
[   10.868890]    inputs:
[   10.868891]      Front Mic=0x19
[   10.868893]      Rear Mic=0x18
[   10.868894]      Line=0x1a
[   10.868895] realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
[   10.868896] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
[   10.881773] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.881872] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.881955] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.882032] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.882123] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.882200] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.882689] hda_intel: Disabling MSI
[   10.882701] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.882727] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   10.886645] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   10.935499] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60b
[   11.003269] type=1400 audit(1385811444.033:2): apparmor="STATUS" operation="profile_load" parent=321 profile="unconfined" name="/sbin/dhclient" pid=359 comm="apparmor_parser"
[   11.003276] type=1400 audit(1385811444.033:3): apparmor="STATUS" operation="profile_load" parent=321 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 comm="apparmor_parser"
[   11.003280] type=1400 audit(1385811444.033:4): apparmor="STATUS" operation="profile_load" parent=321 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
[   11.003718] type=1400 audit(1385811444.033:5): apparmor="STATUS" operation="profile_replace" parent=321 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 comm="apparmor_parser"
[   11.003724] type=1400 audit(1385811444.033:6): apparmor="STATUS" operation="profile_replace" parent=321 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
[   11.003958] type=1400 audit(1385811444.033:7): apparmor="STATUS" operation="profile_replace" parent=321 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
[   11.692676] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   11.694266] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   11.694355] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   11.694447] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   11.759087] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60b
[   11.774806] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.376991] nvidia: module license 'NVIDIA' taints kernel.
[   13.376995] Disabling lock debugging due to kernel taint
[   13.392589] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   13.392718] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.108  Wed Jul 31 19:35:17 PDT 2013
[   14.394495] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   14.612591] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   15.210378] init: failsafe main process (601) killed by TERM signal
[   15.629446] Bluetooth: Core ver 2.16
[   15.629466] NET: Registered protocol family 31
[   15.629467] Bluetooth: HCI device and connection manager initialized
[   15.629479] Bluetooth: HCI socket layer initialized
[   15.629481] Bluetooth: L2CAP socket layer initialized
[   15.629487] Bluetooth: SCO socket layer initialized
[   15.633482] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.633486] Bluetooth: BNEP filters: protocol multicast
[   15.633497] Bluetooth: BNEP socket layer initialized
[   15.636681] Bluetooth: RFCOMM TTY layer initialized
[   15.636695] Bluetooth: RFCOMM socket layer initialized
[   15.636696] Bluetooth: RFCOMM ver 1.11
[   15.639979] type=1400 audit(1385811448.669:8): apparmor="STATUS" operation="profile_load" parent=697 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=704 comm="apparmor_parser"
[   15.639987] type=1400 audit(1385811448.669:9): apparmor="STATUS" operation="profile_load" parent=697 profile="unconfined" name="chromium_browser" pid=704 comm="apparmor_parser"
[   15.640367] type=1400 audit(1385811448.673:10): apparmor="STATUS" operation="profile_replace" parent=697 profile="unconfined" name="chromium_browser" pid=704 comm="apparmor_parser"
[   15.643147] type=1400 audit(1385811448.673:11): apparmor="STATUS" operation="profile_load" parent=697 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=703 comm="apparmor_parser"
[   15.989202] init: avahi-cups-reload main process (739) terminated with status 1
[   16.017287] ppdev: user-space parallel port driver
[   16.027738] audit_printk_skb: 153 callbacks suppressed
[   16.027742] type=1400 audit(1385811449.057:63): apparmor="STATUS" operation="profile_replace" parent=758 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=764 comm="apparmor_parser"
[   16.027751] type=1400 audit(1385811449.057:64): apparmor="STATUS" operation="profile_replace" parent=758 profile="unconfined" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
[   16.028330] type=1400 audit(1385811449.061:65): apparmor="STATUS" operation="profile_replace" parent=758 profile="unconfined" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
[   17.513085] ATL1E 0000:02:00.0 eth0: NIC Link is Up <100 Mbps Full Duplex>
[   41.872208] WARNING! power/level is deprecated; use power/control instead
[   41.922397] usblp 2-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202
[   41.922427] usbcore: registered new interface driver usblp
[   41.964497] init: udev-fallback-graphics main process (1176) terminated with status 1
[   42.002960] init: plymouth-splash main process (1194) terminated with status 1

lascio a voi ogni commento, il problema come già detto è fastidioso ma non bloccante quindi alla peggio senza una soluzione si può andare avanti lo stesso.

Buon fine settimana a tutti

[zdf_9]

Puoi provare a mettere in blacklist il modulo usblp.
Se la stampante funziona anche senza quel modulo dovresti aver risolto.

link utili:
arckwiki cups sezione "Blacklisting usblp"
archwiki cups italiano