Pagina 2 di 2

Re: Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:32
da Schwitzd
Si può provare

Codice: Seleziona tutto

sudo mv /etc/X11/xorg.conf  /etc/X11/xorg.conf.old
e poi fai

Codice: Seleziona tutto

sudo mv /etc/X11/xorg.conf.backup.beryl-script  /etc/X11/xorg.conf
e dopo riavvia la sessione, e spera che funzioni

Re: Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:37
da |Antonio|
A quanto pare ha funzionato! Sei un grande! (good)

Comunque cercherò di installare i driver ATI.

Grazie ancora!

Re: Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:38
da Schwitzd
aspetta... prima di installare i driver ati

posta qui l'xorg.conf

Quello che funziona  ;)

Re: Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:43
da |Antonio|
Vuoi il file o quello che esce scritto aprendolo con un file di testo?

Re: Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:45
da Schwitzd
posta il risultato di

Codice: Seleziona tutto

cat /etc/X11/xorg.conf
Il risultato inseriscilo nei tag code

Re: Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:50
da |Antonio|

Codice: Seleziona tutto

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
        FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        FontPath        "/usr/share/fonts/X11/misc"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "type1"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "it"
        Option          "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ExplorerPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
        Driver          "ati"
        BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "hp f1723"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
        Monitor         "hp f1723"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "stylus" "SendCoreEvents"
        InputDevice     "cursor" "SendCoreEvents"
        InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
        Mode    0666
EndSection

Re: Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:54
da Schwitzd
Non devi installare i driver ati in quanto sono già installati... lo puoi vedere da questa riga

Section "Device"
        Identifier      "ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
        Driver          "ati"
        BusID          "PCI:1:0:0"
EndSection

Credo che il tuo problema sia risolto  ;)

Correggimi se sbaglio

Re: Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:55
da |Antonio|
Sì in effetti non riscontro più problemi. =)

Allora grazie ancora per il tuo aiuto. Inserisco il risolto nel titolo.

Re: [RISOLTO] Guaio con Beryl

Inviato: venerdì 16 marzo 2007, 20:57
da Schwitzd
|Antonio| ha scritto: Sì in effetti non riscontro più problemi. =)
ottimo  :)
|Antonio| ha scritto: Allora grazie ancora per il tuo aiuto
Non ti preoccupare  ;) se hai altri problemi non esitare a chiedere  ;)
|Antonio| ha scritto: Inserisco il risolto nel titolo.
Esatto  ;)