Come da titolo non riesco a navigare tramite wireless (rete wifi funzionante perché con altri dispositivi tipo smartphone navigo alla perfezione) mentre collegando il tutto con il cavo va alla grande.
Metto qui sotto i risultati di alcune interrogazioni fatte alla macchina, magari vi sono di aiuto.
Codice: Seleziona tutto
enp9s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.8 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::223:8bff:fe01:cf08 prefixlen 64 scopeid 0x20<link>
ether 00:23:8b:01:cf:08 txqueuelen 1000 (Ethernet)
RX packets 156165 bytes 134986278 (134.9 MB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 134785 bytes 63666164 (63.6 MB)
TX errors 0 dropped 0 overruns 0 carrier 8 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Loopback locale)
RX packets 3267 bytes 248484 (248.4 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3267 bytes 248484 (248.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp7s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.4 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::e640:3cd7:3c25:75ad prefixlen 64 scopeid 0x20<link>
ether 00:21:5d:3f:3e:de txqueuelen 1000 (Ethernet)
RX packets 787 bytes 92671 (92.6 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2138 bytes 425873 (425.8 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Codice: Seleziona tutto
enp9s0 no wireless extensions.
wlp7s0 IEEE 802.11 ESSID:"Giampaoletti Network"
Mode:Managed Frequency:2.412 GHz Access Point: 1C:BD:B9:7E:0F:09
Bit Rate=54 Mb/s Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=45/70 Signal level=-65 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:6 Missed beacon:0
lo no wireless extensions.