cosa significa questo?

[demish]

Sep  6 11:04:15 massi-laptop pppd[6608]: pppd 2.4.4 started by massi, uid 1000
Sep  6 11:04:16 massi-laptop pppd[5899]: Timeout waiting for PADO packets
Sep  6 11:04:16 massi-laptop pppd[5899]: Unable to complete PPPoE Discovery

[Mok]

Scusa che fai per avviare la connesione ?
pppoe -I eth* -A ?

Secondo me sono già attivi processi pppd o pppoe.

Dovresti usare  pon e poff per attivare e disattivare la connesione,non ppoe ...

[demish]

si infatti uso pon

[carver55]

quoto mok .In particolare se ti interessano i PADO

1)The PPPoE Active Discovery Initiation (PADI) packet:
The PPPoE client sends out a PADI packet to the broadcast address. This packet can also populate the "service-name" field if a service name has been entered on the dial-up networking properties of the PPPoE broadband connectoid. If a service name has not been entered, this field cannot be populated.

2) The PPPoE Active Discovery Offer (PADO) packet:
The PPPoE server, or Access Concentrator, should respond to the PADI with a PADO if the Access Concentrator is able to service the "service-name" field that had been listed in the PADI packet. If no "service-name" field had been listed, the Access Concentrator should respond with a PADO packet that has the "service-name" field populated with the service names that the Access Concentrator can service. The PADO packet is sent to the unicast address of the PPPoE client.

3) The PPPoE Active Discovery Request (PADR) packet:
When a PADO packet is received, the PPPoE client responds with a PADR packet. This packet is sent to the unicast address of the Access Concentrator. The client may receive multiple PADO packets, but the client responds to the first valid PADO that the client received. If the initial PADI packet had a blank "service-name" field filed, the client populates the "service-name" field of the PADR packet with the first service name that had been returned in the PADO packet.

4) The PPPoE Active Discovery Session-confirmation (PADS) packet:
When the PADR is received, the Access Concentrator generates a unique session identification (ID) for the Point-to-Point Protocol (PPP) session and returns this ID to the PPPoE client in the PADS packet. This packet is sent to the unicast address of the client.

I pachetti PADO vengono usati solo nell'handshake tra PPPoE server e client., come descritto sopra nella citazione.

[demish]

no veramente io uso ppptray

[Mok]

ma quello che non ho capito è se tu hai problemi di connessione o no?

[demish]

ehm si ma poi si risolvono da soli

[Mok]

Forse il tuo router negozia una connessione ppp da solo e quando vai ad attiavere con pon è come se partisse un altro servizio...èuna cosa che mi viene in mente cosi..

[demish]

ma io non ho un router uso un modem, è l'alice gate2

[Mok]

Ecco appunto credo quindi di aver fatto centro..

[demish]

cmq ora raramente ho problemi, da quando uso ppptray è migliorata molto la situazione