Connessione via cavo smette di funzionare

[Jays]

Salve a tutti,
scrivo questo post perchè nonostante le mie ricerche non ho trovato soluzioni al mio problema.
Ho installato Ubuntu 15.10 su un PC desktop con WIndows Vista ma non riesco a far funzionare la connessione via cavo, la connessione è riconosciuta e parte all'avvio del pc, dopo un paio di minuti dall'avvio la connessione smette di funzionare e mi costringe a disattivarla e passare al wifi per usare la rete.
Ho escluso ogni altro problema che non sia la scheda di rete mal configurata in quanto la connessione sullo stesso pc con Windows funziona e funziona anche cambiando PC quindi non sono ne' cavo ne' router, ma forse mi sfugge qualcosa?
Siccome di installazione driver Linux sono parecchio inesperta, qualcuno può darmi un'indicazione di cosa posso fare?
Vi posto output dei comandi dati da terminale che forse possono servire. Nel momento in cui li ho dati però la connessione era disattivata da me ed attivo il wifi.
Ovviamente se serve altro ditemi

Codice: Seleziona tutto

jays@PC-Jays:~$ lsb_release -a
No LSB modules are available.
Distributor ID:	Ubuntu
Description:	Ubuntu 15.10
Release:	15.10
Codename:	wily
jays@PC-Jays:~$ uname -a
Linux PC-Jays 4.2.0-16-generic #19-Ubuntu SMP Thu Oct 8 14:46:51 UTC 2015 i686 i686 i686 GNU/Linux
jays@PC-Jays:~$ sudo lshw -c network
[sudo] password di jays: 
  *-network:0             
       description: Ethernet interface
       product: 191 Gigabit Ethernet Adapter
       vendor: Silicon Integrated Systems [SiS]
       physical id: 4
       bus info: pci@0000:00:04.0
       logical name: enp0s4
       version: 02
       serial: 00:1c:25:83:8c:cd
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=sis190 driverversion=1.4 duplex=full latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:19 memory:fdffc000-fdffc07f ioport:fe00(size=128)
  *-network:1
       description: Wireless interface
       product: RT2561/RT61 rev B 802.11g
       vendor: Ralink corp.
       physical id: e
       bus info: pci@0000:00:0e.0
       logical name: wlp0s14
       version: 00
       serial: 00:1e:58:a1:51:c9
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=rt61pci driverversion=4.2.0-16-generic firmware=0.8 ip=192.168.1.12 latency=64 link=yes multicast=yes wireless=IEEE 802.11bg
       resources: irq:18 memory:fdfe8000-fdfeffff
jays@PC-Jays:~$ lspci -knn | grep -A 2 -i net
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02)
	Subsystem: Foxconn International, Inc. Device [105b:0c9e]
	Kernel driver in use: sis190
--
00:0e.0 Network controller [0280]: Ralink corp. RT2561/RT61 rev B 802.11g [1814:0302]
	Subsystem: D-Link System Inc AirPlus G DWL-G510 Wireless Network Adapter (Rev.C) [1186:3c09]
	Kernel driver in use: rt61pci
00:0f.0 Audio device [0403]: Silicon Integrated Systems [SiS] Azalia Audio Controller [1039:7502]
jays@PC-Jays:~$ lspci -vvnn | grep -i net
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02)
00:0e.0 Network controller [0280]: Ralink corp. RT2561/RT61 rev B 802.11g [1814:0302]
	Subsystem: D-Link System Inc AirPlus G DWL-G510 Wireless Network Adapter (Rev.C) [1186:3c09]
jays@PC-Jays:~$ lsusb
Bus 001 Device 005: ID 04b8:0007 Seiko Epson Corp. Printer
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
jays@PC-Jays:~$ nmcli device status
DEVICE   TIPO      STATO        CONNESSIONE            
wlp0s14  wifi      collegato    FASTWEB-1-6tAshqlRwNPw 
enp0s4   ethernet  scollegato   --                     
lo       loopback  non gestito  --                     
jays@PC-Jays:~$ ethtool enp0s4
Settings for enp0s4:
	Supported ports: [ TP MII ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Link partner advertised link modes:  10baseT/Half 10baseT/Full 
	                                     100baseT/Half 100baseT/Full 
	Link partner advertised pause frame use: Symmetric
	Link partner advertised auto-negotiation: Yes
	Speed: 100Mb/s
	Duplex: Full
	Port: MII
	PHYAD: 1
	Transceiver: internal
	Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
	Current message level: 0x00000037 (55)
			       drv probe link ifdown ifup
	Link detected: yes

Un mega grazie a chiunque vorrà dedicare il suo tempo e sapere ad aiutarmi

[grigio]

ciao, quando va in blocco hai provato a digitare `dmesg` per vedere se ti da qualche info in più?

Non è una soluzione definitiva, ma se funziona all'avvio dovresti riuscire a farla funzionare di nuovo se scarichi e ricarichi il driver

```
sudo rmmod sis190
sudo modprobe sis190
```

[Jays]

Ciao Grigio e grazie per il tuo suggerimento!
TI posto l'output del comando che mi hai suggerito, io ci capisco poco o nulla

Codice: Seleziona tutto

jays@PC-Jays:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-16-generic (buildd@lgw01-22) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 14:46:51 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Acer                  Aspire M1610/F672CR             , BIOS R01-A4 09/20/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f3b70-0x000f3b7f] mapped at [c00f3b70]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff]
[    0.000000]  [mem 0x20000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01cdc000, 0x01cdcfff] PGTABLE
[    0.000000] BRK [0x01cdd000, 0x01cddfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34112000-0x36080fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7CC0 000014 (v00 ACRSYS)
[    0.000000] ACPI: RSDT 0x000000007FFF3040 000044 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x000000007FFF30C0 000074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 0x000000007FFF3180 003D62 (v01 ACRSYS AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x000000007FFF0000 000040
[    0.000000] ACPI: HPET 0x000000007FFF7040 000038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[    0.000000] ACPI: SLIC 0x000000007FFF70C0 000176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000020)
[    0.000000] ACPI: _WDT 0x000000007FFF7280 000047 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: MCFG 0x000000007FFF7340 00003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 0x000000007FFF6F40 000084 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: SSDT 0x000000007FFF73C0 00019E (v01 PmRef  Cpu0Ist  00003000 INTL 20041203)
[    0.000000] ACPI: SSDT 0x000000007FFF7850 0002F1 (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1155MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000007ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
[    0.000000] On node 0 totalpages: 524174
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 295922 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f678b000 s47116 r0 d30708 u77824
[    0.000000] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 521944
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic root=UUID=0604ec01-f711-4745-a741-aa0df73c75bb ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] microcode: CPU0 microcode updated early to revision 0xa4, date = 2010-10-02
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007fff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2029520K/2096696K available (7574K kernel code, 738K rwdata, 3020K rodata, 928K init, 796K bss, 67176K reserved, 0K cma-reserved, 1183688K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1b14000 - 0xc1bfc000   ( 928 kB)
                     .data : 0xc1765bf0 - 0xc1b12a40   (3763 kB)
                     .text : 0xc1000000 - 0xc1765bf0   (7574 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 16
[    0.000000] CPU 0 irqstacks, hard=f3c36000 soft=f3c38000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2000.087 MHz processor
[    0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.17 BogoMIPS (lpj=8000348)
[    0.004022] pid_max: default: 32768 minimum: 301
[    0.004034] ACPI: Core revision 20150619
[    0.011929] ACPI: All ACPI Tables successfully acquired
[    0.011956] Security Framework initialized
[    0.011978] AppArmor: AppArmor initialized
[    0.011979] Yama: becoming mindful.
[    0.012046] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012050] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012393] Initializing cgroup subsys blkio
[    0.012399] Initializing cgroup subsys memory
[    0.012412] Initializing cgroup subsys devices
[    0.012416] Initializing cgroup subsys freezer
[    0.012420] Initializing cgroup subsys net_cls
[    0.012425] Initializing cgroup subsys perf_event
[    0.012429] Initializing cgroup subsys net_prio
[    0.012432] Initializing cgroup subsys hugetlb
[    0.012463] CPU: Physical Processor ID: 0
[    0.012465] CPU: Processor Core ID: 0
[    0.012473] mce: CPU supports 6 MCE banks
[    0.012484] CPU0: Thermal monitoring enabled (TM2)
[    0.012490] process: using mwait in idle threads
[    0.012500] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.012502] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.013124] Freeing SMP alternatives memory: 28K (c1bfc000 - c1c03000)
[    0.016022] ftrace: allocating 30215 entries in 60 pages
[    0.028180] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072000] smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[    0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.072000] perf_event_intel: PEBS disabled due to CPU errata
[    0.072000] ... version:                2
[    0.072000] ... bit width:              40
[    0.072000] ... generic registers:      2
[    0.072000] ... value mask:             000000ffffffffff
[    0.072000] ... max period:             000000007fffffff
[    0.072000] ... fixed-purpose events:   3
[    0.072000] ... event mask:             0000000700000003
[    0.072000] CPU 1 irqstacks, hard=f3d76000 soft=f3d78000
[    0.072000] x86: Booting SMP configuration:
[    0.072000] .... node  #0, CPUs:      #1
[    0.008000] microcode: CPU1 microcode updated early to revision 0xa4, date = 2010-10-02
[    0.008000] Initializing CPU#1
[    0.072065] x86: Booted up 1 node, 2 CPUs
[    0.072072] smpboot: Total of 2 processors activated (8000.34 BogoMIPS)
[    0.073280] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.073374] devtmpfs: initialized
[    0.073374] evm: security.selinux
[    0.073374] evm: security.SMACK64
[    0.073374] evm: security.SMACK64EXEC
[    0.073374] evm: security.SMACK64TRANSMUTE
[    0.073374] evm: security.SMACK64MMAP
[    0.073374] evm: security.ima
[    0.073374] evm: security.capability
[    0.073374] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
[    0.073374] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.073374] pinctrl core: initialized pinctrl subsystem
[    0.073374] RTC time: 17:33:33, date: 11/05/15
[    0.073374] NET: Registered protocol family 16
[    0.073374] EISA bus registered
[    0.084011] cpuidle: using governor ladder
[    0.096006] cpuidle: using governor menu
[    0.096214] ACPI: bus type PCI registered
[    0.096219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.096337] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.096341] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.096343] PCI: Using MMCONFIG for extended config space
[    0.096345] PCI: Using configuration type 1 for base access
[    0.096532] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.096534] mtrr: probably your BIOS does not setup all CPUs.
[    0.096535] mtrr: corrected configuration.
[    0.108162] ACPI: Added _OSI(Module Device)
[    0.108166] ACPI: Added _OSI(Processor Device)
[    0.108168] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.108170] ACPI: Added _OSI(Processor Aggregator Device)
[    0.113688] ACPI: Dynamic OEM Table Load:
[    0.113701] ACPI: SSDT 0x00000000F3D58F00 000087 (v01 PmRef  Cpu1Ist  00003000 INTL 20041203)
[    0.114130] ACPI: Interpreter enabled
[    0.114153] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.114159] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.114177] ACPI: (supports S0 S3 S4 S5)
[    0.114181] ACPI: Using IOAPIC for interrupt routing
[    0.114228] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.120235] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.120246] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.120253] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.120307] acpi PNP0A08:00: host bridge window expanded to [io  0x1100-0xffff]; [io  0x1100-0xffff window] ignored
[    0.120558] PCI host bridge to bus 0000:00
[    0.120562] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.120565] pci_bus 0000:00: root bus resource [io  0x0000-0x047f window]
[    0.120568] pci_bus 0000:00: root bus resource [io  0x0480-0x048f]
[    0.120571] pci_bus 0000:00: root bus resource [io  0x0490-0x0cf7 window]
[    0.120574] pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff window]
[    0.120576] pci_bus 0000:00: root bus resource [io  0x1000-0x10cf]
[    0.120579] pci_bus 0000:00: root bus resource [io  0x1100-0xffff]
[    0.120582] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.120584] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.120598] pci 0000:00:00.0: [1039:0671] type 00 class 0x060000
[    0.120762] pci 0000:00:01.0: [1039:0004] type 01 class 0x060400
[    0.120838] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.120954] pci 0000:00:02.0: [1039:0968] type 00 class 0x060100
[    0.121141] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[    0.121167] pci 0000:00:02.5: reg 0x10: [io  0x01f0-0x01f7]
[    0.121178] pci 0000:00:02.5: reg 0x14: [io  0x03f4-0x03f7]
[    0.121189] pci 0000:00:02.5: reg 0x18: [io  0x0170-0x0177]
[    0.121200] pci 0000:00:02.5: reg 0x1c: [io  0x0374-0x0377]
[    0.121211] pci 0000:00:02.5: reg 0x20: [io  0x4000-0x400f]
[    0.121233] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.121236] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.121239] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.121241] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.121260] pci 0000:00:02.5: PME# supported from D3cold
[    0.121380] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.121398] pci 0000:00:03.0: reg 0x10: [mem 0xfdfff000-0xfdffffff]
[    0.121510] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.121575] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.121592] pci 0000:00:03.1: reg 0x10: [mem 0xfdffe000-0xfdffefff]
[    0.121704] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.121773] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[    0.121797] pci 0000:00:03.3: reg 0x10: [mem 0xfdffd000-0xfdffdfff]
[    0.121865] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.121924] pci 0000:00:03.3: System wakeup disabled by ACPI
[    0.121999] pci 0000:00:04.0: [1039:0191] type 00 class 0x020000
[    0.122024] pci 0000:00:04.0: reg 0x10: [mem 0xfdffc000-0xfdffc07f]
[    0.122035] pci 0000:00:04.0: reg 0x14: [io  0xfe00-0xfe7f]
[    0.122096] pci 0000:00:04.0: supports D1 D2
[    0.122098] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.122157] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.122223] pci 0000:00:05.0: [1039:1183] type 00 class 0x010185
[    0.122247] pci 0000:00:05.0: reg 0x10: [io  0xfd00-0xfd07]
[    0.122258] pci 0000:00:05.0: reg 0x14: [io  0xfc00-0xfc03]
[    0.122269] pci 0000:00:05.0: reg 0x18: [io  0xfb00-0xfb07]
[    0.122280] pci 0000:00:05.0: reg 0x1c: [io  0xfa00-0xfa03]
[    0.122291] pci 0000:00:05.0: reg 0x20: [io  0xf900-0xf90f]
[    0.122329] pci 0000:00:05.0: PME# supported from D3cold
[    0.122454] pci 0000:00:06.0: [1039:000a] type 01 class 0x060400
[    0.122534] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.122660] pci 0000:00:0c.0: [104c:8024] type 00 class 0x0c0010
[    0.122686] pci 0000:00:0c.0: reg 0x10: [mem 0xfdffb000-0xfdffb7ff]
[    0.122698] pci 0000:00:0c.0: reg 0x14: [mem 0xfdff4000-0xfdff7fff]
[    0.122762] pci 0000:00:0c.0: supports D1 D2
[    0.122764] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
[    0.122880] pci 0000:00:0d.0: [1057:3052] type 00 class 0x070300
[    0.122907] pci 0000:00:0d.0: reg 0x10: [mem 0xfdffa000-0xfdffafff]
[    0.122918] pci 0000:00:0d.0: reg 0x14: [io  0xf600-0xf6ff]
[    0.122985] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[    0.123098] pci 0000:00:0e.0: [1814:0302] type 00 class 0x028000
[    0.123123] pci 0000:00:0e.0: reg 0x10: [mem 0xfdfe8000-0xfdfeffff]
[    0.123295] pci 0000:00:0f.0: [1039:7502] type 00 class 0x040300
[    0.123320] pci 0000:00:0f.0: reg 0x10: [mem 0xfdff0000-0xfdff3fff]
[    0.123390] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.123449] pci 0000:00:0f.0: System wakeup disabled by ACPI
[    0.123601] pci 0000:01:00.0: [1002:94c3] type 00 class 0x030000
[    0.123639] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.123656] pci 0000:01:00.0: reg 0x18: [mem 0xfdde0000-0xfddeffff 64bit]
[    0.123668] pci 0000:01:00.0: reg 0x20: [io  0xde00-0xdeff]
[    0.123688] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.123716] pci 0000:01:00.0: supports D1 D2
[    0.123789] pci 0000:01:00.1: [1002:aa10] type 00 class 0x040300
[    0.123827] pci 0000:01:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff 64bit]
[    0.123897] pci 0000:01:00.1: supports D1 D2
[    0.128035] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.128046] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.128054] pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.128064] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.128162] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.128170] pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]
[    0.128175] pci 0000:00:06.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.128182] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.128204] pci_bus 0000:00: on NUMA node 0
[    0.128325] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.128401] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.128474] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.128546] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.128618] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.128690] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.128762] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.128833] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.129704] ACPI: Enabled 1 GPEs in block 10 to 1F
[    0.129875] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.129875] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.129875] vgaarb: loaded
[    0.129875] vgaarb: bridge control possible 0000:01:00.0
[    0.129875] SCSI subsystem initialized
[    0.129875] libata version 3.00 loaded.
[    0.129875] ACPI: bus type USB registered
[    0.129875] usbcore: registered new interface driver usbfs
[    0.129875] usbcore: registered new interface driver hub
[    0.129875] usbcore: registered new device driver usb
[    0.129875] PCI: Using ACPI for IRQ routing
[    0.140209] PCI: pci_cache_line_size set to 64 bytes
[    0.140272] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.140276] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[    0.140494] NetLabel: Initializing
[    0.140496] NetLabel:  domain hash size = 128
[    0.140498] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.140515] NetLabel:  unlabeled traffic allowed by default
[    0.140555] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.140555] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.140555] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.142179] clocksource: Switched to clocksource hpet
[    0.154452] AppArmor: AppArmor Filesystem Enabled
[    0.154634] pnp: PnP ACPI init
[    0.155100] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.155105] system 00:00: [io  0x0800-0x0805] has been reserved
[    0.155110] system 00:00: [io  0x0290-0x0297] has been reserved
[    0.155113] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.155121] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155212] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.155391] pnp 00:02: [dma 2]
[    0.155449] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.155722] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.156065] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.156422] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.156585] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.156667] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.156755] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.156761] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156865] system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.156870] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[    0.156873] system 00:09: [mem 0xfed30000-0xfed300ff] has been reserved
[    0.156877] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[    0.156880] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[    0.156883] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.156886] system 00:09: [mem 0x00100000-0x7ffeffff] could not be reserved
[    0.156889] system 00:09: [mem 0xffee0000-0xffefffff] has been reserved
[    0.156893] system 00:09: [mem 0xfffe0000-0xfffeffff] has been reserved
[    0.156896] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.156899] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.156904] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.156914] pnp: PnP ACPI: found 10 devices
[    0.156923] PnPBIOS: Disabled by ACPI PNP
[    0.194727] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.194779] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[    0.194783] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.194787] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.194794] pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.194799] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.194806] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.194810] pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]
[    0.194816] pci 0000:00:06.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.194821] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.194829] pci_bus 0000:00: resource 4 [io  0x0000-0x047f window]
[    0.194832] pci_bus 0000:00: resource 5 [io  0x0480-0x048f]
[    0.194835] pci_bus 0000:00: resource 6 [io  0x0490-0x0cf7 window]
[    0.194837] pci_bus 0000:00: resource 7 [io  0x0d00-0x0fff window]
[    0.194840] pci_bus 0000:00: resource 8 [io  0x1000-0x10cf]
[    0.194842] pci_bus 0000:00: resource 9 [io  0x1100-0xffff]
[    0.194845] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[    0.194848] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[    0.194851] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.194854] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.194856] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.194859] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.194862] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.194864] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.194922] NET: Registered protocol family 2
[    0.195228] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.195259] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.195315] TCP: Hash tables configured (established 8192 bind 8192)
[    0.195377] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.195391] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.195481] NET: Registered protocol family 1
[    0.364590] pci 0000:01:00.0: Video device with shadowed ROM
[    0.364601] PCI: CLS 64 bytes, default 64
[    0.364706] Trying to unpack rootfs image as initramfs...
[    1.139187] Freeing initrd memory: 32188K (f4112000 - f6081000)
[    1.139708] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa4
[    1.139717] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa4
[    1.139867] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.140072] Scanning for low memory corruption every 60 seconds
[    1.140653] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.140727] Initialise system trusted keyring
[    1.140774] audit: initializing netlink subsys (disabled)
[    1.140814] audit: type=2000 audit(1446744814.140:1): initialized
[    1.141311] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.144369] zpool: loaded
[    1.144373] zbud: loaded
[    1.144489] VFS: Disk quotas dquot_6.6.0
[    1.144560] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.145409] fuse init (API version 7.23)
[    1.145675] Key type big_key registered
[    1.146037] Key type asymmetric registered
[    1.146042] Asymmetric key parser 'x509' registered
[    1.146064] bounce: pool size: 64 pages
[    1.146128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.146182] io scheduler noop registered
[    1.146186] io scheduler deadline registered (default)
[    1.146246] io scheduler cfq registered
[    1.146560] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.146573] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.146626] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    1.146628] vesafb: scrolling: redraw
[    1.146631] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.146661] vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 5824k, total 5824k
[    1.146875] Console: switching to colour frame buffer device 175x65
[    1.146922] fb0: VESA VGA frame buffer device
[    1.146951] intel_idle: does not run on family 6 model 15
[    1.147073] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.147081] ACPI: Power Button [PWRB]
[    1.147162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.147166] ACPI: Power Button [PWRF]
[    1.147991] thermal LNXTHERM:00: registered as thermal_zone0
[    1.147994] ACPI: Thermal Zone [THRM] (30 C)
[    1.148213] thermal LNXTHERM:01: registered as thermal_zone1
[    1.148215] ACPI: Thermal Zone [SYST] (30 C)
[    1.148276] GHES: HEST is not enabled!
[    1.148318] isapnp: Scanning for PnP cards...
[    1.156072] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.176456] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.196854] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.199666] Linux agpgart interface v0.103
[    1.203612] brd: module loaded
[    1.205572] loop: module loaded
[    1.205923] pata_sis 0000:00:02.5: version 0.5.2
[    1.207126] scsi host0: pata_sis
[    1.207262] scsi host1: pata_sis
[    1.207334] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[    1.207337] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[    1.207495] libphy: Fixed MDIO Bus: probed
[    1.207499] tun: Universal TUN/TAP device driver, 1.6
[    1.207501] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.207598] PPP generic driver version 2.4.2
[    1.207734] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.207743] ehci-pci: EHCI PCI platform driver
[    1.207963] ehci-pci 0000:00:03.3: EHCI Host Controller
[    1.207975] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[    1.208058] ehci-pci 0000:00:03.3: cache line size of 64 is not supported
[    1.208077] ehci-pci 0000:00:03.3: irq 22, io mem 0xfdffd000
[    1.220015] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    1.220126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.220130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.220132] usb usb1: Product: EHCI Host Controller
[    1.220135] usb usb1: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
[    1.220137] usb usb1: SerialNumber: 0000:00:03.3
[    1.220335] hub 1-0:1.0: USB hub found
[    1.220348] hub 1-0:1.0: 8 ports detected
[    1.220666] ehci-platform: EHCI generic platform driver
[    1.220689] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.220697] ohci-pci: OHCI PCI platform driver
[    1.220899] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    1.220912] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[    1.220944] ohci-pci 0000:00:03.0: irq 20, io mem 0xfdfff000
[    1.278059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.278063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.278066] usb usb2: Product: OHCI PCI host controller
[    1.278068] usb usb2: Manufacturer: Linux 4.2.0-16-generic ohci_hcd
[    1.278071] usb usb2: SerialNumber: 0000:00:03.0
[    1.278246] hub 2-0:1.0: USB hub found
[    1.278257] hub 2-0:1.0: 4 ports detected
[    1.278623] ohci-pci 0000:00:03.1: OHCI PCI host controller
[    1.278634] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[    1.278669] ohci-pci 0000:00:03.1: irq 21, io mem 0xfdffe000
[    1.334082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.334086] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.334088] usb usb3: Product: OHCI PCI host controller
[    1.334091] usb usb3: Manufacturer: Linux 4.2.0-16-generic ohci_hcd
[    1.334094] usb usb3: SerialNumber: 0000:00:03.1
[    1.334269] hub 3-0:1.0: USB hub found
[    1.334280] hub 3-0:1.0: 4 ports detected
[    1.334490] ohci-platform: OHCI generic platform driver
[    1.334512] uhci_hcd: USB Universal Host Controller Interface driver
[    1.334628] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.335051] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.335058] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.335289] mousedev: PS/2 mouse device common for all mice
[    1.335496] rtc_cmos 00:01: RTC can wake from S4
[    1.335636] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.335661] rtc_cmos 00:01: alarms up to one year, 242 bytes nvram, hpet irqs
[    1.335679] i2c /dev entries driver
[    1.335791] device-mapper: uevent: version 1.0.3
[    1.335905] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    1.335949] platform eisa.0: Probing EISA bus 0
[    1.335954] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.335957] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.335959] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.335962] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.335965] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.335967] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.335970] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.335973] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.335975] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.335978] platform eisa.0: EISA: Detected 0 cards
[    1.336025] cpufreq-nforce2: No nForce2 chipset.
[    1.336048] ledtrig-cpu: registered to indicate activity on CPUs
[    1.336065] PCCT header not found.
[    1.336439] NET: Registered protocol family 10
[    1.336816] NET: Registered protocol family 17
[    1.336838] Key type dns_resolver registered
[    1.337186] Using IPI No-Shortcut mode
[    1.337384] Loading compiled-in X.509 certificates
[    1.341648] Loaded X.509 cert 'Build time autogenerated kernel key: 9a18469980b5ebdd28885474f95f179ffebbdfd7'
[    1.341677] registered taskstats version 1
[    1.341704] zswap: loading zswap
[    1.341708] zswap: using zbud pool
[    1.341716] zswap: using lzo compressor
[    1.345066] Key type trusted registered
[    1.350992] Key type encrypted registered
[    1.351009] AppArmor: AppArmor sha1 policy hashing enabled
[    1.351015] ima: No TPM chip found, activating TPM-bypass!
[    1.351056] evm: HMAC attrs: 0x1
[    1.351426]   Magic number: 7:239:592
[    1.351573] rtc_cmos 00:01: setting system clock to 2015-11-05 17:33:34 UTC (1446744814)
[    1.351910] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.351913] EDD information not available.
[    1.352026] PM: Hibernation image not present or could not be loaded.
[    1.364556] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.458420] isapnp: No Plug & Play device found
[    1.458477] ata2: port disabled--ignoring
[    1.459007] Freeing unused kernel memory: 928K (c1b14000 - c1bfc000)
[    1.459107] Write protecting the kernel text: 7576k
[    1.459146] Write protecting the kernel read-only data: 3024k
[    1.459148] NX-protecting the kernel data: 4712k
[    1.481287] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.574061] [drm] Initialized drm 1.1.0 20060810
[    1.584219] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[    1.584462] sis190: 0000:00:04.0: Read MAC address from EEPROM
[    1.584465] sis190: 0000:00:04.0: Error EEPROM read 0
[    1.584468] sis190: 0000:00:04.0: Read MAC address from APC
[    1.588156] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    1.593820] FDC 0 is a post-1991 82077
[    1.640050] sis190: 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1
[    1.672414] [drm] radeon kernel modesetting enabled.
[    1.672530] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[    1.672533] fb: switching to radeondrmfb from VESA VGA
[    1.672609] Console: switching to colour dummy device 80x25
[    1.673351] [drm] initializing kernel modesetting (RV610 0x1002:0x94C3 0x174B:0xE400).
[    1.673377] [drm] register mmio base: 0xFDDE0000
[    1.673379] [drm] register mmio size: 65536
[    1.673645] ATOM BIOS: 11X
[    1.673687] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[    1.673691] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[    1.673694] [drm] Detected VRAM RAM=256M, BAR=256M
[    1.673696] [drm] RAM width 64bits DDR
[    1.673850] [TTM] Zone  kernel: Available graphics memory: 439488 kiB
[    1.673853] [TTM] Zone highmem: Available graphics memory: 1031332 kiB
[    1.673855] [TTM] Initializing pool allocator
[    1.673866] [TTM] Initializing DMA pool allocator
[    1.673918] [drm] radeon: 256M of VRAM memory ready
[    1.673920] [drm] radeon: 512M of GTT memory ready.
[    1.673951] [drm] Loading RV610 Microcode
[    1.674109] [drm] Internal thermal controller with fan control
[    1.674194] [drm] radeon: power management initialized
[    1.674414] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    1.700944] [drm] PCIE GART of 512M enabled (table at 0x0000000000254000).
[    1.701050] radeon 0000:01:00.0: WB enabled
[    1.701056] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffc17c00
[    1.702417] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xf90121d0
[    1.702423] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.702425] [drm] Driver supports precise vblank timestamp query.
[    1.702428] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.702481] radeon 0000:01:00.0: radeon: using MSI.
[    1.702524] [drm] radeon: irq initialized.
[    1.733996] [drm] ring test on 0 succeeded in 0 usecs
[    1.908699] [drm] ring test on 5 succeeded in 1 usecs
[    1.908705] usb 2-2: new low-speed USB device number 2 using ohci-pci
[    1.908714] [drm] UVD initialized successfully.
[    1.908941] [drm] ib test on ring 0 succeeded in 0 usecs

[Jays]

Codice: Seleziona tutto

[    1.925367] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
[    1.925370] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.925374] usb 1-4: Product: USB2.0 Hub
[    1.925815] hub 1-4:1.0: USB hub found
[    1.926124] hub 1-4:1.0: 4 ports detected
[    2.120095] usb 2-2: New USB device found, idVendor=046d, idProduct=c05a
[    2.120102] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.120107] usb 2-2: Product: USB Optical Mouse
[    2.120112] usb 2-2: Manufacturer: Logitech
[    2.133691] hidraw: raw HID events driver (C) Jiri Kosina
[    2.139793] tsc: Refined TSC clocksource calibration: 2000.070 MHz
[    2.139799] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd47074491, max_idle_ns: 440795259574 ns
[    2.146699] usbcore: registered new interface driver usbhid
[    2.146703] usbhid: USB HID core driver
[    2.152045] sis190: 0000:00:04.0: Using transceiver at address 1 as default
[    2.152565] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input5
[    2.152785] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.0-2/input0
[    2.184395] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8418000 (IRQ: 19), 00:1c:25:83:8c:cd
[    2.184402] sis190 0000:00:04.0 eth0: RGMII mode.
[    2.184412] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
[    2.216089] sata_sis 0000:00:05.0: version 1.0
[    2.216351] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[    2.217467] sis190 0000:00:04.0 enp0s4: renamed from eth0
[    2.217510] scsi host2: sata_sis
[    2.217676] scsi host3: sata_sis
[    2.217760] ata3: PATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xf900 irq 17
[    2.217764] ata4: PATA max UDMA/133 cmd 0xfb00 ctl 0xfa00 bmdma 0xf908 irq 17
[    2.272070] firewire_ohci 0000:00:0c.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    2.336036] usb 3-3: new full-speed USB device number 2 using ohci-pci
[    2.380366] ata3.00: ATA-7: ST3250310AS, 3.AAD, max UDMA/133
[    2.380373] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.396351] ata3.00: configured for UDMA/133
[    2.396564] scsi 2:0:0:0: Direct-Access     ATA      ST3250310AS      D    PQ: 0 ANSI: 5
[    2.396996] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.397035] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.397082] sd 2:0:0:0: [sda] Write Protect is off
[    2.397087] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.397132] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.443982]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.444745] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.551052] usb 3-3: New USB device found, idVendor=058f, idProduct=9360
[    2.551059] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.551064] usb 3-3: Product: USB Reader
[    2.551068] usb 3-3: Manufacturer:  
[    2.551072] usb 3-3: SerialNumber: 2004888
[    2.556102] [drm] ib test on ring 5 succeeded
[    2.557758] [drm] Radeon Display Connectors
[    2.557761] [drm] Connector 0:
[    2.557762] [drm]   VGA-1
[    2.557765] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    2.557767] [drm]   Encoders:
[    2.557769] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.557771] [drm] Connector 1:
[    2.557772] [drm]   DIN-1
[    2.557774] [drm]   Encoders:
[    2.557775] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    2.557776] [drm] Connector 2:
[    2.557778] [drm]   DVI-I-1
[    2.557779] [drm]   HPD1
[    2.557782] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    2.557783] [drm]   Encoders:
[    2.557785] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.557786] [drm]     DFP1: INTERNAL_LVTM1
[    2.563556] usb-storage 3-3:1.0: USB Mass Storage device detected
[    2.563675] scsi host4: usb-storage 3-3:1.0
[    2.563803] usbcore: registered new interface driver usb-storage
[    2.569065] usbcore: registered new interface driver uas
[    2.605575] ata4.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[    2.605584] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.615576] [drm] fb mappable at 0xD0355000
[    2.615579] [drm] vram apper at 0xD0000000
[    2.615581] [drm] size 8294400
[    2.615582] [drm] fb depth is 24
[    2.615584] [drm]    pitch is 7680
[    2.615711] fbcon: radeondrmfb (fb0) is primary device
[    2.615879] Console: switching to colour frame buffer device 240x67
[    2.615946] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.615949] radeon 0000:01:00.0: registered panic notifier
[    2.624047] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    2.672205] ata4.00: configured for UDMA/133
[    2.672412] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM332082 E    PQ: 0 ANSI: 5
[    2.672834] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.672873] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.672917] sd 3:0:0:0: [sdb] Write Protect is off
[    2.672922] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.672955] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.711888]  sdb: sdb1
[    2.712312] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.772265] firewire_core 0000:00:0c.0: created device fw0: GUID 00016c2000568734, S400
[    3.136186] clocksource: Switched to clocksource tsc
[    3.569128] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    3.576176] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    3.583118] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    3.590128] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    3.590593] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    3.591984] sd 4:0:0:1: Attached scsi generic sg3 type 0
[    3.592447] sd 4:0:0:2: Attached scsi generic sg4 type 0
[    3.592771] sd 4:0:0:3: Attached scsi generic sg5 type 0
[    3.731592] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.870112] random: nonblocking pool is initialized
[    3.943173] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[    3.954165] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    3.965161] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    3.976134] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    4.369784] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    4.573622] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    4.682687] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    4.682909] systemd[1]: Detected architecture x86.
[    4.693650] systemd[1]: Set hostname to <PC-Jays>.
[    5.425032] systemd[1]: Reached target User and Group Name Lookups.
[    5.425403] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.425437] systemd[1]: Reached target Remote File Systems (Pre).
[    5.425502] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.425570] systemd[1]: Created slice Root Slice.
[    5.425676] systemd[1]: Listening on Journal Socket.
[    5.425862] systemd[1]: Created slice System Slice.
[    5.426039] systemd[1]: Created slice system-getty.slice.
[    5.427177] systemd[1]: Mounting Debug File System...
[    5.428893] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.430165] systemd[1]: Mounting Huge Pages File System...
[    5.431964] systemd[1]: Started Braille Device Support.
[    5.434691] systemd[1]: Mounting POSIX Message Queue File System...
[    5.436742] systemd[1]: Started Read required files in advance.
[    5.438217] systemd[1]: Starting Increase datagram queue length...
[    5.439907] systemd[1]: Starting Setup Virtual Console...
[    5.442240] systemd[1]: Starting Uncomplicated firewall...
[    5.442541] systemd[1]: Listening on Journal Audit Socket.
[    5.447342] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.447446] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.447638] systemd[1]: Created slice User and Session Slice.
[    5.447666] systemd[1]: Reached target Slices.
[    5.447722] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.588315] systemd[1]: Reached target Encrypted Volumes.
[    5.653261] systemd[1]: Starting Load Kernel Modules...
[    5.653395] systemd[1]: Listening on udev Kernel Socket.
[    5.653524] systemd[1]: Listening on udev Control Socket.
[    5.655161] systemd[1]: Starting udev Coldplug all Devices...
[    5.657681] systemd[1]: Started Setup Virtual Console.
[    5.689855] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.691397] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.726142] systemd[1]: Started Uncomplicated firewall.
[    6.030157] systemd[1]: Mounted Huge Pages File System.
[    6.030258] systemd[1]: Mounted Debug File System.
[    6.030294] systemd[1]: Mounted POSIX Message Queue File System.
[    6.031310] systemd[1]: Started Increase datagram queue length.
[    6.043254] systemd[1]: Listening on Syslog Socket.
[    6.044808] systemd[1]: Starting Journal Service...
[    6.148402] systemd[1]: Started udev Coldplug all Devices.
[    6.320203] lp: driver loaded but no devices found
[    6.374136] ppdev: user-space parallel port driver
[    6.417957] parport_pc 00:05: reported by Plug and Play ACPI
[    6.418045] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    6.512266] lp0: using parport0 (interrupt-driven).
[    6.530284] systemd[1]: Started Load Kernel Modules.
[    6.532127] systemd[1]: Starting Apply Kernel Variables...
[    6.533700] systemd[1]: Mounting FUSE Control File System...
[    6.541479] systemd[1]: Mounted FUSE Control File System.
[    6.675785] systemd[1]: Started Journal Service.
[    8.322427] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    8.696646] systemd-journald[226]: Received request to flush runtime journal from PID 1
[    9.444107] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.748037] coretemp coretemp.0: Using relative temperature scale!
[    9.748062] coretemp coretemp.0: Using relative temperature scale!
[   10.981124] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.986052] snd_hda_intel 0000:00:0f.0: CORB reset timeout#1, CORBRP = 0
[   11.046542] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[   11.126984] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
[   11.130248] snd_hda_codec_realtek hdaudioC0D0: ALC1200: SKU not ready 0x598301f0
[   11.130785] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   11.130790] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[   11.130793] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.130796] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.130799] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   11.130801] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.130805] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   11.130808] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   11.130811] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1c
[   11.146225] input: HDA SIS966 Front Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input7
[   11.146356] input: HDA SIS966 Rear Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input8
[   11.146476] input: HDA SIS966 Line as /devices/pci0000:00/0000:00:0f.0/sound/card0/input9
[   11.146588] input: HDA SIS966 Line Out Front as /devices/pci0000:00/0000:00:0f.0/sound/card0/input10
[   11.146706] input: HDA SIS966 Line Out Surround as /devices/pci0000:00/0000:00:0f.0/sound/card0/input11
[   11.146814] input: HDA SIS966 Line Out CLFE as /devices/pci0000:00/0000:00:0f.0/sound/card0/input12
[   11.146917] input: HDA SIS966 Line Out Side as /devices/pci0000:00/0000:00:0f.0/sound/card0/input13
[   11.147023] input: HDA SIS966 Front Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input14
[   11.339492] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.343528] rt61pci 0000:00:0e.0 wlp0s14: renamed from wlan0
[   12.523018] cfg80211: World regulatory domain updated:
[   12.523027] cfg80211:  DFS Master region: unset
[   12.523030] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.523034] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.523037] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.523039] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.523043] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   12.523046] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   12.523049] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   12.523051] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.523054] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   13.399263] Adding 10231804k swap on /dev/sda5.  Priority:-1 extents:1 across:10231804k FS
[   13.612862] audit: type=1400 audit(1446741226.758:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=535 comm="apparmor_parser"
[   13.612884] audit: type=1400 audit(1446741226.758:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=535 comm="apparmor_parser"
[   13.697958] audit: type=1400 audit(1446741226.842:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=535 comm="apparmor_parser"
[   13.697980] audit: type=1400 audit(1446741226.842:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535 comm="apparmor_parser"
[   13.697988] audit: type=1400 audit(1446741226.842:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=535 comm="apparmor_parser"
[   13.697996] audit: type=1400 audit(1446741226.842:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=535 comm="apparmor_parser"
[   14.491282] audit: type=1400 audit(1446741227.634:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=535 comm="apparmor_parser"
[   14.491315] audit: type=1400 audit(1446741227.634:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=535 comm="apparmor_parser"
[   14.491327] audit: type=1400 audit(1446741227.634:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=535 comm="apparmor_parser"
[   14.491338] audit: type=1400 audit(1446741227.634:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=535 comm="apparmor_parser"
[   16.384452] cgroup: new mount options do not match the existing superblock, will be ignored
[   22.149489] IPv6: ADDRCONF(NETDEV_UP): enp0s4: link is not ready
[   22.149700] IPv6: ADDRCONF(NETDEV_UP): enp0s4: link is not ready
[   22.153040] IPv6: ADDRCONF(NETDEV_UP): wlp0s14: link is not ready
[   22.153172] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561.bin'
[   22.365155] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
[   22.413471] IPv6: ADDRCONF(NETDEV_UP): wlp0s14: link is not ready
[   22.549474] IPv6: ADDRCONF(NETDEV_UP): wlp0s14: link is not ready
[   23.645098] wlp0s14: authenticate with d4:d1:84:00:5f:3c
[   23.657514] wlp0s14: send auth to d4:d1:84:00:5f:3c (try 1/3)
[   23.659015] wlp0s14: authenticated
[   23.659355] rt61pci 0000:00:0e.0 wlp0s14: disabling HT/VHT due to WEP/TKIP use
[   23.659362] rt61pci 0000:00:0e.0 wlp0s14: disabling HT as WMM/QoS is not supported by the AP
[   23.659365] rt61pci 0000:00:0e.0 wlp0s14: disabling VHT as WMM/QoS is not supported by the AP
[   23.660241] wlp0s14: associate with d4:d1:84:00:5f:3c (try 1/3)
[   23.662471] wlp0s14: RX AssocResp from d4:d1:84:00:5f:3c (capab=0x11 status=0 aid=2)
[   23.662540] wlp0s14: associated
[   23.662605] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s14: link becomes ready
[   23.675789] cfg80211: Regulatory domain changed to country: IT
[   23.675797] cfg80211:  DFS Master region: ETSI
[   23.675800] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   23.675803] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   23.675807] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   23.675810] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   23.675813] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[   23.675816] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   24.484762] IPv6: wlp0s14: IPv6 duplicate address fe80::21e:58ff:fea1:51c9 detected!
[   32.192038] sis190 0000:00:04.0 enp0s4: mii ext = 0000
[   32.216045] sis190 0000:00:04.0 enp0s4: mii lpa=45e1 adv=01e1 exp=0007
[   32.216053] sis190 0000:00:04.0 enp0s4: link on 100 Mbps Full Duplex mode
[   32.216080] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s4: link becomes ready
[ 1820.708734] wlp0s14: deauthenticating from d4:d1:84:00:5f:3c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1820.748006] cfg80211: World regulatory domain updated:
[ 1820.748048] cfg80211:  DFS Master region: unset
[ 1820.748051] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1820.748055] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1820.748059] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1820.748062] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1820.748066] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1820.748070] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1820.748074] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 1820.748077] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1820.748080] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1821.808866] wlp0s14: authenticate with d4:d1:84:00:5f:3c
[ 1821.829314] wlp0s14: send auth to d4:d1:84:00:5f:3c (try 1/3)
[ 1821.831305] wlp0s14: authenticated
[ 1821.832244] rt61pci 0000:00:0e.0 wlp0s14: disabling HT/VHT due to WEP/TKIP use
[ 1821.832254] rt61pci 0000:00:0e.0 wlp0s14: disabling HT as WMM/QoS is not supported by the AP
[ 1821.832260] rt61pci 0000:00:0e.0 wlp0s14: disabling VHT as WMM/QoS is not supported by the AP
[ 1821.836071] wlp0s14: associate with d4:d1:84:00:5f:3c (try 1/3)
[ 1821.838418] wlp0s14: RX AssocResp from d4:d1:84:00:5f:3c (capab=0x11 status=0 aid=2)
[ 1821.838495] wlp0s14: associated
[ 1821.849203] cfg80211: Regulatory domain changed to country: IT
[ 1821.849212] cfg80211:  DFS Master region: ETSI
[ 1821.849216] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1821.849222] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1821.849227] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1821.849233] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1821.849238] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 1821.849242] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 1823.054015] IPv6: wlp0s14: IPv6 duplicate address fe80::21e:58ff:fea1:51c9 detected!
[ 3626.073517] wlp0s14: deauthenticating from d4:d1:84:00:5f:3c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3626.123523] cfg80211: World regulatory domain updated:
[ 3626.123535] cfg80211:  DFS Master region: unset
[ 3626.123538] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3626.123543] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3626.123546] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3626.123550] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3626.123554] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3626.123558] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3626.123561] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3626.123564] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3626.123568] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3627.196846] wlp0s14: authenticate with d4:d1:84:00:5f:3c
[ 3627.217417] wlp0s14: send auth to d4:d1:84:00:5f:3c (try 1/3)
[ 3627.219050] wlp0s14: authenticated
[ 3627.220454] rt61pci 0000:00:0e.0 wlp0s14: disabling HT/VHT due to WEP/TKIP use
[ 3627.220464] rt61pci 0000:00:0e.0 wlp0s14: disabling HT as WMM/QoS is not supported by the AP
[ 3627.220469] rt61pci 0000:00:0e.0 wlp0s14: disabling VHT as WMM/QoS is not supported by the AP
[ 3627.224065] wlp0s14: associate with d4:d1:84:00:5f:3c (try 1/3)
[ 3627.226438] wlp0s14: RX AssocResp from d4:d1:84:00:5f:3c (capab=0x11 status=0 aid=2)
[ 3627.226507] wlp0s14: associated
[ 3627.237181] cfg80211: Regulatory domain changed to country: IT
[ 3627.237190] cfg80211:  DFS Master region: ETSI
[ 3627.237194] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3627.237199] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3627.237205] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3627.237210] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3627.237215] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 3627.237219] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 3629.240798] IPv6: wlp0s14: IPv6 duplicate address fe80::21e:58ff:fea1:51c9 detected!
[ 3925.240105] perf interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

[grigio]

Potrebbe essere questo

[ 3629.240798] IPv6: wlp0s14: IPv6 duplicate address fe80::21e:58ff:fea1:51c9 detected!

ovvero ci sono 2 indirizzi ip uguali nella tua sottorete.. prova a disabilitare il wifi se usi il cavo o viceversa

[Jays]

Ho provato a disattivare wifi ma niente, dopo qualche minuto la connessione si blocca ma senza alcun messaggio di errore o altro, semplicemente smette di caricare ogni pagina internet.
Potrebbe essere che il driver per la mia scheda non vada bene? Purtroppo non ho trovato nessun driver aggiornato da reinstallare e non sono esperta di compilazione driver...
Compro una scheda di rete nuova?

[grigio]

sembra che il tuo router assegni lo stesso indirizzo ip a più computer/schede di rete della tua rete locale..
Prova a cercare qualche guida su "disabilitare ipv6 ubuntu" visto che pare essere solo quello ad essere duplicato

[magozurlinux]

Da terminale postami questo comando:

Codice: Seleziona tutto

sudo ifconfig -a

Per disabiltare l'IPv6 da Ubuntu, segui questa guida:

http://ubuntusemplice.blogspot.it/2011/ ... buntu.html

[Jays]

Grazie per l'interessamento e scusate il ritardo nella risposta!!!

Codice: Seleziona tutto

jays@PC-Jays:~$ sudo ifconfig -a
[sudo] password di jays: 
enp0s4    Link encap:Ethernet  IndirizzoHW 00:1c:25:83:8c:cd  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:355 errors:13 dropped:0 overruns:0 frame:13
          TX packets:352 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000 
          Byte RX:37389 (37.3 KB)  Byte TX:42959 (42.9 KB)

lo        Link encap:Loopback locale  
          indirizzo inet:127.0.0.1  Maschera:255.0.0.0
          indirizzo inet6: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:458 errors:0 dropped:0 overruns:0 frame:0
          TX packets:458 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:0 
          Byte RX:87080 (87.0 KB)  Byte TX:87080 (87.0 KB)

wlp0s14   Link encap:Ethernet  IndirizzoHW 00:1e:58:a1:51:c9  
          indirizzo inet:192.168.1.12  Bcast:192.168.1.255  Maschera:255.255.255.0
          indirizzo inet6: fe80::21e:58ff:fea1:51c9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1067 errors:0 dropped:0 overruns:0 frame:0
          TX packets:978 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000 
          Byte RX:664361 (664.3 KB)  Byte TX:146512 (146.5 KB)

Questo con connessione wi-fi, cavo disabilitato altrimenti non vi leggo...
Provo a disabilitare ipv6 e vi faccio sapere!!!
Intanto grazie mille :-)