condividere hd esterno con tablet android

[gepix]

Salve a tutti,
dopo un paio di giorni di ricerche, guide, prove, installazioni e quant'altro, mi sono arreso e chiedo il vostro aiuto.
Ho un pc desktop con ubuntu 14.04. Su questo pc è montato (all'interno del case) un disco dati da 200Gb e un'altro disco dati da 1.5 Tb collegato tramite usb.
Questo pc è collegato tramite cavo al modem-router technicolor della fastweb.
alcune cartelle dei tre dischi (disco principale- disco dati interno - disco dati esterno) sono condivise in rete.
Da un altro pc laptop (con ubunru 14.04) riesco a vedere le cartelle condivise contenute nel disco principale e nel disco dati esterno (usb), ma non vedo le cartelle del disco dati esterno.
Ma il problema principale è che con un tablet samsung (mediante ES file manager) riesco ad accedere solo alle cartelle condivise nel disco principale mentre se tento di accedere alle cartelle contenute nei dischi esterni mi dice che l'account non dispone dei permessi.
Sui computers il servizio Samba è installato!

Un'altra cosa...che forse può essere d'aiuto a chi cercherà di aiutarmi: se dal desktop seleziono il disco dati esterno usb e con il tasto dx vado in proprietà, nella sezione permessi (mi sembra) dice che il proprietario è Root e non è possibile modificare i permessi di lettura-scrittura.

qualcuno mi aiuta???
grazie
ciao

[fiuwe]

Ciao,
posta il tuo file di configurazione samba .../etc/samba/smb.conf

[gepix]

ciao ecco il file smb.conf

Codice: Seleziona tutto

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = workgroup

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
	max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
	syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
	server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;	passdb backend = tdbsam

	obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
	unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
	pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
	map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;	usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
	usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

	wins support = yes
	username map = /etc/samba/smbusers
	security = user
;	encrypt passwords = yes
;	guest ok = no
;	guest account = nobody
;	encrypt passwords = yes
;	guest ok = no
;	guest account = nobody
[printers]
	comment = All Printers
	browseable = no
	path = /var/spool/samba
	printable = yes
;	guest ok = no
;	read only = yes
	create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers
;	browseable = yes
;	read only = yes
;	guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin




[iTunes]
	path = /media/riccardo/VERBATIM2/riccardo/iTunes
	
;	browseable = yes
	valid users = riccardo, root

available = yes
browsable = yes
public = yes
writable = yes
create mask = 0755
[roberta]
	path = /media/riccardo/VERBATIM2/roberta
	
;	browseable = yes
	guest ok = yes

available = no
browsable = no
public = no
writable = yes
[Musica]
	path = /home/riccardo/Musica
	
;	browseable = yes
	guest ok = yes
available = no
browsable = no
public = no
writable = yes

[riccardo]
path = /media/riccardo/VERBATIM2/riccardo
comment = pubblica
available = yes
browsable = yes
public = yes
writable = yes

[fiuwe]

prova ad aggiungere il parametro

Codice: Seleziona tutto

force user = tuoutentelinux

alle share dei dischi esterni ...

[gepix]

ciao fiuwe, grazie per la dritta...potresti essere un pò più preciso...intendo dire, dove (a che punto) inserire force user = mionome?????
e ancora cosa intendi con alle share dei dischi esterni???

[magozurlinux]

Ciao,

share significa condividere.

[gepix]

si lo so che share significa condividere....chiaramente sono già condivisi...il problema come ho scritto sopra è che nella scheda ->proprietà->permessi, non mi consente di cambiare nulla...Gruppo - Mionomeutente - accesso - nessuno --- altri- accesso - nessuno.
Non riesco amettere in share il disco esterno (usb)

[magozurlinux]

Nel file smb.conf, sotto workgroup:

Codice: Seleziona tutto

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = workgroup

aggiungi:

Codice: Seleziona tutto

force user = tuo-username

salva il file e riavvia il servizio samba.

[gepix]

grazie magozurlix, ma credo che tu non abbia guarfato il file smb.conf, che ho postato qui sopra.
Non c'è nessuna sezione "workgroup", ma quella stringa che mi suggerisci di aggiungere è già presente sotto "Global"
Adesso aggiungo il force user poi riposto il file smb.conf per conferma che è stato fatto bene.

[gepix]

qui di seguito il mio file smb.conf:

Codice: Seleziona tutto

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = workgroup

force user = riccardo

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
	max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
	syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
	server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;	passdb backend = tdbsam

	obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
	unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
	pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
	map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;	usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
	usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

	wins support = yes
	username map = /etc/samba/smbusers
	security = user
;	encrypt passwords = yes
;	guest ok = no
;	guest account = nobody
;	encrypt passwords = yes
;	guest ok = no
;	guest account = nobody
[printers]
	comment = All Printers
	browseable = no
	path = /var/spool/samba
	printable = yes
;	guest ok = no
;	read only = yes
	create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers
;	browseable = yes
;	read only = yes
;	guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin




[iTunes]
	path = /media/riccardo/VERBATIM2/riccardo/iTunes
	
;	browseable = yes
	valid users = riccardo, root

available = yes
browsable = yes
public = yes
writable = yes
create mask = 0755
[roberta]
	path = /media/riccardo/VERBATIM2/roberta
	
;	browseable = yes
	guest ok = yes

available = no
browsable = no
public = no
writable = yes
[Musica]
	path = /home/riccardo/Musica
	
;	browseable = yes
	guest ok = yes
available = no
browsable = no
public = no
writable = yes

[riccardo]
path = /media/riccardo/VERBATIM2/riccardo
comment = pubblica
available = yes
browsable = yes
public = yes
writable = yes

[magozurlinux]

Va bene!

aspetta fiuwe; io non uso samba e non sono pratico di quella applicazione.

Ciao

[gepix]

ok magozurlinux...comunque ho applicato la stringa force user e adesso funziona...grazie.
Resta il fatto che adesso il tablet vede la cartella condivisa, ma da pc non riesco ancora a modificare i permessi del disco esterno...boh...

[magozurlinux]

ok magozurlinux...comunque ho applicato la stringa force user e adesso funziona...grazie.
Resta il fatto che adesso il tablet vede la cartella condivisa, ma da pc non riesco ancora a modificare i permessi del disco esterno...boh...

Manda un MP a fiuwe per il supporto.

Ciao

[fiuwe]

ciao,
"da pc non riesco ancora a modificare i permessi del disco esterno...boh..."
In che senso ?
Da pc quale ? quello da cui condividi ? Che permessi devi modificare ?

[gepix]

dunque provo a spiegarmi...vado su risors - cartella home. si apre la finestra Home dove a sinistra c'è una finestra verticale con indicate le vatie cartelle, i dispositivi e la rete. Nella sezione dispositivi sono elencari i dischi esterni (2) il disco floppy, e computer.
Quando seleziono uno dei dischi esterni con il tasto destro si apre il menù a tendina. Seleziono proprietà. Si apre una finestra con le caratteristiche del disco selezionato ed in alto ci sono tre sezioni: Generale, permessi, condivisione nella rete locale. Se entro nella sezione permessi, trovo scritto:
proprietario: Me
accesso: creare ed eliminare file
Gruppo: riccardo
accesso nessuno
altri:
Accesso: nessuno.
Ecco nessuna di queste opzioni è modificabile...ovvero ognuna di queste opzioni si trova all'interno di una tendina, insieme ad altre opzioni (tipo: elencare soltanto i files, accedere ai files, leggere e scrivere i file) ma resta sempre su "nessuno". Cioè, apro il menù a tendina, cambio la voce nesuno con, diciamo, accedere ai files, chiudo la tendina e ritorna la scritta nessuno.

Ecco spero di essere stato chiaro, questo è il problema che incontro...forse è normale che sia così....non so che dire.
ciao e grazie comunque