[Risolto]ubuntu 18.04 non accede a risorse condiv pc windows

[Jimmy_68a]

Scusate se mi intrometto, spero di non disturbare.
Ho lo stesso problema ovvero dopo aver fatto l'aggiornamento alla versione 18.04 non riesco più a vedere la rete windows (tutti gli altri computer in rete sono windows).
O meglio la rete funziona perché accedo ad internet, vedo la posta elettronica, vedo le stampanti, ho provato un ping ed è andato bene ma non vedo le risorse condivise degli altri PC.
La risposta quando sfoglio la rete di windows è "la cartella è vuota".
Non vorrei condividere le risorse del mio pc quindi vorrei evitare di installare Samba

[giulux]

Per evitare confusioni ho creato questa nuova discussione.
Metti un titolo che la distingua da quella in cui ti eri inserito.
Ciao.

[thece]

guarda se il pacchetto smbclient è installato

Codice: Seleziona tutto

dpkg -l | grep smbclient

se NO, installalo

Codice: Seleziona tutto

sudo apt-get install smbclient

e riprova

[Jimmy_68a]

Grazie e scusate per l'intromissione.
Ho provato ad installare smbclient ma non è cambiato nulla sempre "cartella vuota"

[thece]

Se dai il comando

Codice: Seleziona tutto

smbtree -d 10 -b -N

cosa viene fuori?

[Jimmy_68a]

Ecco qua

Codice: Seleziona tutto

INFO: Current debug levels:
  all: 10
  tdb: 10
  printdrivers: 10
  lanman: 10
  smb: 10
  rpc_parse: 10
  rpc_srv: 10
  rpc_cli: 10
  passdb: 10
  sam: 10
  auth: 10
  winbind: 10
  vfs: 10
  idmap: 10
  quota: 10
  acls: 10
  locking: 10
  msdfs: 10
  dmapi: 10
  registry: 10
  scavenger: 10
  dns: 10
  ldb: 10
  tevent: 10
  auth_audit: 10
  auth_json_audit: 10
  kerberos: 10
  drs_repl: 10
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
INFO: Current debug levels:
  all: 10
  tdb: 10
  printdrivers: 10
  lanman: 10
  smb: 10
  rpc_parse: 10
  rpc_srv: 10
  rpc_cli: 10
  passdb: 10
  sam: 10
  auth: 10
  winbind: 10
  vfs: 10
  idmap: 10
  quota: 10
  acls: 10
  locking: 10
  msdfs: 10
  dmapi: 10
  registry: 10
  scavenger: 10
  dns: 10
  ldb: 10
  tevent: 10
  auth_audit: 10
  auth_json_audit: 10
  kerberos: 10
  drs_repl: 10
Processing section "[global]"
doing parameter client min protocolo = SMB2
Unknown parameter encountered: "client min protocolo"
Ignoring unknown parameter "client min protocolo"
doing parameter client max protocolo = SMB3
Unknown parameter encountered: "client max protocolo"
Ignoring unknown parameter "client max protocolo"
doing parameter workgroup = WORKGROUP
doing parameter server string = %h server (Samba, Ubuntu)
doing parameter dns proxy = no
doing parameter log file = /var/log/samba/log.%m
doing parameter max log size = 1000
doing parameter syslog = 0
WARNING: The "syslog" option is deprecated
doing parameter panic action = /usr/share/samba/panic-action %d
doing parameter server role = standalone server
doing parameter passdb backend = tdbsam
doing parameter obey pam restrictions = yes
doing parameter unix password sync = yes
doing parameter passwd program = /usr/bin/passwd %u
doing parameter passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
doing parameter pam password change = yes
doing parameter map to guest = bad user
doing parameter usershare allow guests = yes
pm_process() returned Yes
lp_servicenumber: couldn't find homes
added interface enp1s0 ip=192.168.1.14 bcast=192.168.1.255 netmask=255.255.255.0
added interface wlp2s0 ip=192.168.1.18 bcast=192.168.1.255 netmask=255.255.255.0
name_resolve_bcast: Attempting broadcast lookup for name __MSBROWSE__<0x1>
parse_nmb: packet id = 32405
nmb packet from 192.168.1.150(35072) header: id=32405 opcode=Query(0) response=Yes
    header: flags: bcast=No rec_avail=No rec_des=Yes trunc=No auth=Yes
    header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
    answers: nmb_name=__MSBROWSE__<01> rr_type=32 rr_class=1 ttl=300000
    answers   0 char ..........<.....   hex 8000C0A801968000A9FE3C8A8000A9FE
    answers  10 char _x   hex 5F78
Got a positive name query response from 192.168.1.150 ( 192.168.1.150 169.254.60.138 169.254.95.120 )
validator failed
parse_nmb: packet id = 32463
nmb packet from 192.168.1.150(35072) header: id=32463 opcode=Query(0) response=Yes
    header: flags: bcast=No rec_avail=No rec_des=Yes trunc=No auth=Yes
    header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
    answers: nmb_name=__MSBROWSE__<01> rr_type=32 rr_class=1 ttl=300000
    answers   0 char ..........<.....   hex 8000C0A801968000A9FE3C8A8000A9FE
    answers  10 char _x   hex 5F78
Got a positive name query response from 192.168.1.150 ( 192.168.1.150 169.254.60.138 169.254.95.120 )
validator failed
name_status_find: looking up *#00 at 192.168.1.150
Opening cache file at /var/cache/samba/gencache.tdb
tdb(/var/cache/samba/gencache.tdb): tdb_open_ex: could not open file /var/cache/samba/gencache.tdb: Permesso negato
gencache_init: Opening cache file /var/cache/samba/gencache.tdb read-only.
Opening cache file at /var/run/samba/gencache_notrans.tdb
Adding cache entry with key=[NBT/*#00.1D.192.168.1.150] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
namecache_status_fetch: no entry for NBT/*#00.1D.192.168.1.150 found.
startlmhosts: Can't open lmhosts file /etc/samba/lmhosts. Error was File o directory non esistente
parse_nmb: packet id = 14745
nmb packet from 192.168.1.150(35072) header: id=14745 opcode=Query(0) response=Yes
    header: flags: bcast=No rec_avail=No rec_des=No trunc=No auth=Yes
    header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
    answers: nmb_name=*<00> rr_type=33 rr_class=1 ttl=0
    answers   0 char .SERVER2008        hex 08534552564552323030382020202020
    answers  10 char ...SILVE           hex 00040053494C56452020202020202020
    answers  20 char   ...SILVE         hex 202000840053494C5645202020202020
    answers  30 char     ...SERVER200   hex 202020201C8400534552564552323030
    answers  40 char 8      ..SILVE     hex 38202020202020040053494C56452020
    answers  50 char         ...SILVE   hex 20202020202020201B040053494C5645
    answers  60 char           ...SIL   hex 202020202020202020201E840053494C
    answers  70 char VE          ....   hex 5645202020202020202020201D040001
    answers  80 char .__MSBROWSE__...   hex 025F5F4D5342524F5753455F5F020184
    answers  90 char .\..U...........   hex 005CF3FC5515EA000000000000000000
    answers  a0 char ................   hex 00000000000000000000000000000000
    answers  b0 char ...............   hex 000000000000000000000000000000
SERVER2008#00: flags = 0x04
SILVE#00: flags = 0x84
SILVE#1c: flags = 0x84
SERVER2008#20: flags = 0x04
SILVE#1b: flags = 0x04
SILVE#1e: flags = 0x84
SILVE#1d: flags = 0x04
__MSBROWSE__#01: flags = 0x84
Adding cache entry with key=[NBT/*#00.1D.192.168.1.150] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
Adding cache entry with key=[NBT/*#00.1D.192.168.1.150] and timeout=[mer set 19 13:13:30 2018 CEST] (660 seconds ahead)
namecache_status_store: entry NBT/*#00.1D.192.168.1.150 store failed.
name_status_find: name found, name SILVE ip address is 192.168.1.150
internal_resolve_name: looking up SILVE#1d (sitename (null))
Adding cache entry with key=[NBT/SILVE#1D] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
no entry for SILVE#1D found.
resolve_lmhosts: Attempting lmhosts lookup for name SILVE<0x1d>
startlmhosts: Can't open lmhosts file /etc/samba/lmhosts. Error was File o directory non esistente
resolve_hosts: not appropriate for name type <0x1d>
name_resolve_bcast: Attempting broadcast lookup for name SILVE<0x1d>
parse_nmb: packet id = 31456
nmb packet from 192.168.1.150(35072) header: id=31456 opcode=Query(0) response=Yes
    header: flags: bcast=No rec_avail=No rec_des=Yes trunc=No auth=Yes
    header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
    answers: nmb_name=SILVE<1d> rr_type=32 rr_class=1 ttl=300000
    answers   0 char ..........<.....   hex 0000C0A801960000A9FE3C8A0000A9FE
    answers  10 char _x   hex 5F78
Got a positive name query response from 192.168.1.150 ( 192.168.1.150 169.254.60.138 169.254.95.120 )
remove_duplicate_addrs2: looking for duplicate address/port pairs
namecache_store: storing 3 addresses for SILVE#1d: 192.168.1.150,169.254.60.138,169.254.95.120
Adding cache entry with key=[NBT/SILVE#1D] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
Adding cache entry with key=[NBT/SILVE#1D] and timeout=[mer set 19 13:13:30 2018 CEST] (660 seconds ahead)
internal_resolve_name: returning 3 addresses: 192.168.1.150:0 169.254.60.138:0 169.254.95.120:0 
found master browser SILVE, 192.168.1.150
Connecting to 192.168.1.150 at port 445
Socket options:
	SO_KEEPALIVE = 0
	SO_REUSEADDR = 0
	SO_BROADCAST = 0
	TCP_NODELAY = 1
	TCP_KEEPCNT = 9
	TCP_KEEPIDLE = 7200
	TCP_KEEPINTVL = 75
	IPTOS_LOWDELAY = 0
	IPTOS_THROUGHPUT = 0
	SO_REUSEPORT = 0
	SO_SNDBUF = 87040
	SO_RCVBUF = 372480
	SO_SNDLOWAT = 1
	SO_RCVLOWAT = 1
	SO_SNDTIMEO = 0
	SO_RCVTIMEO = 0
	TCP_QUICKACK = 1
	TCP_DEFER_ACCEPT = 0
got OID=1.3.6.1.4.1.311.2.2.30
got OID=1.2.840.48018.1.2.2
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schannel' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
Starting GENSEC mechanism spnego
Starting GENSEC submechanism ntlmssp
     negotiate: struct NEGOTIATE_MESSAGE
        Signature                : 'NTLMSSP'
        MessageType              : NtLmNegotiate (1)
        NegotiateFlags           : 0x62088215 (1644724757)
               1: NTLMSSP_NEGOTIATE_UNICODE
               0: NTLMSSP_NEGOTIATE_OEM    
               1: NTLMSSP_REQUEST_TARGET   
               1: NTLMSSP_NEGOTIATE_SIGN   
               0: NTLMSSP_NEGOTIATE_SEAL   
               0: NTLMSSP_NEGOTIATE_DATAGRAM
               0: NTLMSSP_NEGOTIATE_LM_KEY 
               0: NTLMSSP_NEGOTIATE_NETWARE
               1: NTLMSSP_NEGOTIATE_NTLM   
               0: NTLMSSP_NEGOTIATE_NT_ONLY
               0: NTLMSSP_ANONYMOUS        
               0: NTLMSSP_NEGOTIATE_OEM_DOMAIN_SUPPLIED
               0: NTLMSSP_NEGOTIATE_OEM_WORKSTATION_SUPPLIED
               0: NTLMSSP_NEGOTIATE_THIS_IS_LOCAL_CALL
               1: NTLMSSP_NEGOTIATE_ALWAYS_SIGN
               0: NTLMSSP_TARGET_TYPE_DOMAIN
               0: NTLMSSP_TARGET_TYPE_SERVER
               0: NTLMSSP_TARGET_TYPE_SHARE
               1: NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
               0: NTLMSSP_NEGOTIATE_IDENTIFY
               0: NTLMSSP_REQUEST_NON_NT_SESSION_KEY
               0: NTLMSSP_NEGOTIATE_TARGET_INFO
               1: NTLMSSP_NEGOTIATE_VERSION
               1: NTLMSSP_NEGOTIATE_128    
               1: NTLMSSP_NEGOTIATE_KEY_EXCH
               0: NTLMSSP_NEGOTIATE_56     
        DomainNameLen            : 0x0000 (0)
        DomainNameMaxLen         : 0x0000 (0)
        DomainName               : *
            DomainName               : ''
        WorkstationLen           : 0x0000 (0)
        WorkstationMaxLen        : 0x0000 (0)
        Workstation              : *
            Workstation              : ''
        Version: struct ntlmssp_VERSION
            ProductMajorVersion      : NTLMSSP_WINDOWS_MAJOR_VERSION_6 (6)
            ProductMinorVersion      : NTLMSSP_WINDOWS_MINOR_VERSION_1 (1)
            ProductBuild             : 0x0000 (0)
            Reserved: ARRAY(3)
                [0]                      : 0x00 (0)
                [1]                      : 0x00 (0)
                [2]                      : 0x00 (0)
            NTLMRevisionCurrent      : NTLMSSP_REVISION_W2K3 (15)
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
Got challenge flags:
Got NTLMSSP neg_flags=0x62898215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_TARGET_TYPE_DOMAIN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_TARGET_INFO
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62008215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
SPNEGO login failed: The attempted logon is invalid. This is either due to a bad username or authentication information.
got OID=1.3.6.1.4.1.311.2.2.30
got OID=1.2.840.48018.1.2.2
Starting GENSEC mechanism spnego
Starting GENSEC submechanism ntlmssp
     negotiate: struct NEGOTIATE_MESSAGE
        Signature                : 'NTLMSSP'
        MessageType              : NtLmNegotiate (1)
        NegotiateFlags           : 0x62088215 (1644724757)
               1: NTLMSSP_NEGOTIATE_UNICODE
               0: NTLMSSP_NEGOTIATE_OEM    
               1: NTLMSSP_REQUEST_TARGET   
               1: NTLMSSP_NEGOTIATE_SIGN   
               0: NTLMSSP_NEGOTIATE_SEAL   
               0: NTLMSSP_NEGOTIATE_DATAGRAM
               0: NTLMSSP_NEGOTIATE_LM_KEY 
               0: NTLMSSP_NEGOTIATE_NETWARE
               1: NTLMSSP_NEGOTIATE_NTLM   
               0: NTLMSSP_NEGOTIATE_NT_ONLY
               0: NTLMSSP_ANONYMOUS        
               0: NTLMSSP_NEGOTIATE_OEM_DOMAIN_SUPPLIED
               0: NTLMSSP_NEGOTIATE_OEM_WORKSTATION_SUPPLIED
               0: NTLMSSP_NEGOTIATE_THIS_IS_LOCAL_CALL
               1: NTLMSSP_NEGOTIATE_ALWAYS_SIGN
               0: NTLMSSP_TARGET_TYPE_DOMAIN
               0: NTLMSSP_TARGET_TYPE_SERVER
               0: NTLMSSP_TARGET_TYPE_SHARE
               1: NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
               0: NTLMSSP_NEGOTIATE_IDENTIFY
               0: NTLMSSP_REQUEST_NON_NT_SESSION_KEY
               0: NTLMSSP_NEGOTIATE_TARGET_INFO
               1: NTLMSSP_NEGOTIATE_VERSION
               1: NTLMSSP_NEGOTIATE_128    
               1: NTLMSSP_NEGOTIATE_KEY_EXCH
               0: NTLMSSP_NEGOTIATE_56     
        DomainNameLen            : 0x0000 (0)
        DomainNameMaxLen         : 0x0000 (0)
        DomainName               : *
            DomainName               : ''
        WorkstationLen           : 0x0000 (0)
        WorkstationMaxLen        : 0x0000 (0)
        Workstation              : *
            Workstation              : ''
        Version: struct ntlmssp_VERSION
            ProductMajorVersion      : NTLMSSP_WINDOWS_MAJOR_VERSION_6 (6)
            ProductMinorVersion      : NTLMSSP_WINDOWS_MINOR_VERSION_1 (1)
            ProductBuild             : 0x0000 (0)
            Reserved: ARRAY(3)
                [0]                      : 0x00 (0)
                [1]                      : 0x00 (0)
                [2]                      : 0x00 (0)
            NTLMRevisionCurrent      : NTLMSSP_REVISION_W2K3 (15)
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
Got challenge flags:
Got NTLMSSP neg_flags=0x62898215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_TARGET_TYPE_DOMAIN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_TARGET_INFO
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 00 00 00 00 00 00 00 00                             ........ 
num_setup=0, max_setup=0, param_total=32, this_param=32, max_param=8, data_total=0, this_data=0, max_data=65535, param_offset=92, param_pad=2, param_disp=0, data_offset=124, data_pad=0, data_disp=0
smb_signing_sign_pdu: sent SMB signature of
[0000] 00 00 00 00 00 00 00 00                             ........ 
SILVE
internal_resolve_name: looking up SILVE#1d (sitename (null))
Adding cache entry with key=[NBT/SILVE#1D] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
no entry for SILVE#1D found.
resolve_lmhosts: Attempting lmhosts lookup for name SILVE<0x1d>
startlmhosts: Can't open lmhosts file /etc/samba/lmhosts. Error was File o directory non esistente
resolve_hosts: not appropriate for name type <0x1d>
name_resolve_bcast: Attempting broadcast lookup for name SILVE<0x1d>
parse_nmb: packet id = 2172
nmb packet from 192.168.1.150(35072) header: id=2172 opcode=Query(0) response=Yes
    header: flags: bcast=No rec_avail=No rec_des=Yes trunc=No auth=Yes
    header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
    answers: nmb_name=SILVE<1d> rr_type=32 rr_class=1 ttl=300000
    answers   0 char ..........<.....   hex 0000C0A801960000A9FE3C8A0000A9FE
    answers  10 char _x   hex 5F78
Got a positive name query response from 192.168.1.150 ( 192.168.1.150 169.254.60.138 169.254.95.120 )
remove_duplicate_addrs2: looking for duplicate address/port pairs
namecache_store: storing 3 addresses for SILVE#1d: 192.168.1.150,169.254.60.138,169.254.95.120
Adding cache entry with key=[NBT/SILVE#1D] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
Adding cache entry with key=[NBT/SILVE#1D] and timeout=[mer set 19 13:13:30 2018 CEST] (660 seconds ahead)
internal_resolve_name: returning 3 addresses: 192.168.1.150:0 169.254.60.138:0 169.254.95.120:0 
Connecting to 192.168.1.150 at port 445
Socket options:
	SO_KEEPALIVE = 0
	SO_REUSEADDR = 0
	SO_BROADCAST = 0
	TCP_NODELAY = 1
	TCP_KEEPCNT = 9
	TCP_KEEPIDLE = 7200
	TCP_KEEPINTVL = 75
	IPTOS_LOWDELAY = 0
	IPTOS_THROUGHPUT = 0
	SO_REUSEPORT = 0
	SO_SNDBUF = 87040
	SO_RCVBUF = 372480
	SO_SNDLOWAT = 1
	SO_RCVLOWAT = 1
	SO_SNDTIMEO = 0
	SO_RCVTIMEO = 0
	TCP_QUICKACK = 1
	TCP_DEFER_ACCEPT = 0
got OID=1.3.6.1.4.1.311.2.2.30
got OID=1.2.840.48018.1.2.2
Starting GENSEC mechanism spnego
Starting GENSEC submechanism ntlmssp
     negotiate: struct NEGOTIATE_MESSAGE
        Signature                : 'NTLMSSP'
        MessageType              : NtLmNegotiate (1)
        NegotiateFlags           : 0x62088215 (1644724757)
               1: NTLMSSP_NEGOTIATE_UNICODE
               0: NTLMSSP_NEGOTIATE_OEM    
               1: NTLMSSP_REQUEST_TARGET   
               1: NTLMSSP_NEGOTIATE_SIGN   
               0: NTLMSSP_NEGOTIATE_SEAL   
               0: NTLMSSP_NEGOTIATE_DATAGRAM
               0: NTLMSSP_NEGOTIATE_LM_KEY 
               0: NTLMSSP_NEGOTIATE_NETWARE
               1: NTLMSSP_NEGOTIATE_NTLM   
               0: NTLMSSP_NEGOTIATE_NT_ONLY
               0: NTLMSSP_ANONYMOUS        
               0: NTLMSSP_NEGOTIATE_OEM_DOMAIN_SUPPLIED
               0: NTLMSSP_NEGOTIATE_OEM_WORKSTATION_SUPPLIED
               0: NTLMSSP_NEGOTIATE_THIS_IS_LOCAL_CALL
               1: NTLMSSP_NEGOTIATE_ALWAYS_SIGN
               0: NTLMSSP_TARGET_TYPE_DOMAIN
               0: NTLMSSP_TARGET_TYPE_SERVER
               0: NTLMSSP_TARGET_TYPE_SHARE
               1: NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
               0: NTLMSSP_NEGOTIATE_IDENTIFY
               0: NTLMSSP_REQUEST_NON_NT_SESSION_KEY
               0: NTLMSSP_NEGOTIATE_TARGET_INFO
               1: NTLMSSP_NEGOTIATE_VERSION
               1: NTLMSSP_NEGOTIATE_128    
               1: NTLMSSP_NEGOTIATE_KEY_EXCH
               0: NTLMSSP_NEGOTIATE_56     
        DomainNameLen            : 0x0000 (0)
        DomainNameMaxLen         : 0x0000 (0)
        DomainName               : *
            DomainName               : ''
        WorkstationLen           : 0x0000 (0)
        WorkstationMaxLen        : 0x0000 (0)
        Workstation              : *
            Workstation              : ''
        Version: struct ntlmssp_VERSION
            ProductMajorVersion      : NTLMSSP_WINDOWS_MAJOR_VERSION_6 (6)
            ProductMinorVersion      : NTLMSSP_WINDOWS_MINOR_VERSION_1 (1)
            ProductBuild             : 0x0000 (0)
            Reserved: ARRAY(3)
                [0]                      : 0x00 (0)
                [1]                      : 0x00 (0)
                [2]                      : 0x00 (0)
            NTLMRevisionCurrent      : NTLMSSP_REVISION_W2K3 (15)
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
Got challenge flags:
Got NTLMSSP neg_flags=0x62898215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_TARGET_TYPE_DOMAIN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_TARGET_INFO
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62008215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
SPNEGO login failed: The attempted logon is invalid. This is either due to a bad username or authentication information.
got OID=1.3.6.1.4.1.311.2.2.30
got OID=1.2.840.48018.1.2.2
Starting GENSEC mechanism spnego
Starting GENSEC submechanism ntlmssp
     negotiate: struct NEGOTIATE_MESSAGE
        Signature                : 'NTLMSSP'
        MessageType              : NtLmNegotiate (1)
        NegotiateFlags           : 0x62088215 (1644724757)
               1: NTLMSSP_NEGOTIATE_UNICODE
               0: NTLMSSP_NEGOTIATE_OEM    
               1: NTLMSSP_REQUEST_TARGET   
               1: NTLMSSP_NEGOTIATE_SIGN   
               0: NTLMSSP_NEGOTIATE_SEAL   
               0: NTLMSSP_NEGOTIATE_DATAGRAM
               0: NTLMSSP_NEGOTIATE_LM_KEY 
               0: NTLMSSP_NEGOTIATE_NETWARE
               1: NTLMSSP_NEGOTIATE_NTLM   
               0: NTLMSSP_NEGOTIATE_NT_ONLY
               0: NTLMSSP_ANONYMOUS        
               0: NTLMSSP_NEGOTIATE_OEM_DOMAIN_SUPPLIED
               0: NTLMSSP_NEGOTIATE_OEM_WORKSTATION_SUPPLIED
               0: NTLMSSP_NEGOTIATE_THIS_IS_LOCAL_CALL
               1: NTLMSSP_NEGOTIATE_ALWAYS_SIGN
               0: NTLMSSP_TARGET_TYPE_DOMAIN
               0: NTLMSSP_TARGET_TYPE_SERVER
               0: NTLMSSP_TARGET_TYPE_SHARE
               1: NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
               0: NTLMSSP_NEGOTIATE_IDENTIFY
               0: NTLMSSP_REQUEST_NON_NT_SESSION_KEY
               0: NTLMSSP_NEGOTIATE_TARGET_INFO
               1: NTLMSSP_NEGOTIATE_VERSION
               1: NTLMSSP_NEGOTIATE_128    
               1: NTLMSSP_NEGOTIATE_KEY_EXCH
               0: NTLMSSP_NEGOTIATE_56     
        DomainNameLen            : 0x0000 (0)
        DomainNameMaxLen         : 0x0000 (0)
        DomainName               : *
            DomainName               : ''
        WorkstationLen           : 0x0000 (0)
        WorkstationMaxLen        : 0x0000 (0)
        Workstation              : *
            Workstation              : ''
        Version: struct ntlmssp_VERSION
            ProductMajorVersion      : NTLMSSP_WINDOWS_MAJOR_VERSION_6 (6)
            ProductMinorVersion      : NTLMSSP_WINDOWS_MINOR_VERSION_1 (1)
            ProductBuild             : 0x0000 (0)
            Reserved: ARRAY(3)
                [0]                      : 0x00 (0)
                [1]                      : 0x00 (0)
                [2]                      : 0x00 (0)
            NTLMRevisionCurrent      : NTLMSSP_REVISION_W2K3 (15)
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
Got challenge flags:
Got NTLMSSP neg_flags=0x62898215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_TARGET_TYPE_DOMAIN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_TARGET_INFO
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 00 00 00 00 00 00 00 00                             ........ 
num_setup=0, max_setup=0, param_total=32, this_param=32, max_param=8, data_total=0, this_data=0, max_data=65535, param_offset=92, param_pad=2, param_disp=0, data_offset=124, data_pad=0, data_disp=0
smb_signing_sign_pdu: sent SMB signature of
[0000] 00 00 00 00 00 00 00 00                             ........ 
	\\SERVER2008     		
Adding cache entry with key=[AD_SITENAME/DOMAIN/] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
sitename_fetch: No stored sitename for realm ''
internal_resolve_name: looking up SERVER2008#20 (sitename (null))
Adding cache entry with key=[NBT/SERVER2008#20] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
no entry for SERVER2008#20 found.
resolve_lmhosts: Attempting lmhosts lookup for name SERVER2008<0x20>
startlmhosts: Can't open lmhosts file /etc/samba/lmhosts. Error was File o directory non esistente
resolve_wins: WINS server resolution selected and no WINS servers listed.
resolve_hosts: Attempting host lookup for name SERVER2008<0x20>
remove_duplicate_addrs2: looking for duplicate address/port pairs
namecache_store: storing 1 address for SERVER2008#20: 192.168.1.150
Adding cache entry with key=[NBT/SERVER2008#20] and timeout=[gio gen  1 01:00:00 1970 CET] (-1537354950 seconds in the past)
Adding cache entry with key=[NBT/SERVER2008#20] and timeout=[mer set 19 13:13:30 2018 CEST] (660 seconds ahead)
internal_resolve_name: returning 1 addresses: 192.168.1.150:0 
Connecting to 192.168.1.150 at port 445
Socket options:
	SO_KEEPALIVE = 0
	SO_REUSEADDR = 0
	SO_BROADCAST = 0
	TCP_NODELAY = 1
	TCP_KEEPCNT = 9
	TCP_KEEPIDLE = 7200
	TCP_KEEPINTVL = 75
	IPTOS_LOWDELAY = 0
	IPTOS_THROUGHPUT = 0
	SO_REUSEPORT = 0
	SO_SNDBUF = 87040
	SO_RCVBUF = 372480
	SO_SNDLOWAT = 1
	SO_RCVLOWAT = 1
	SO_SNDTIMEO = 0
	SO_RCVTIMEO = 0
	TCP_QUICKACK = 1
	TCP_DEFER_ACCEPT = 0
got OID=1.3.6.1.4.1.311.2.2.30
got OID=1.2.840.48018.1.2.2
Starting GENSEC mechanism spnego
Starting GENSEC submechanism ntlmssp
     negotiate: struct NEGOTIATE_MESSAGE
        Signature                : 'NTLMSSP'
        MessageType              : NtLmNegotiate (1)
        NegotiateFlags           : 0x62088215 (1644724757)
               1: NTLMSSP_NEGOTIATE_UNICODE
               0: NTLMSSP_NEGOTIATE_OEM    
               1: NTLMSSP_REQUEST_TARGET   
               1: NTLMSSP_NEGOTIATE_SIGN   
               0: NTLMSSP_NEGOTIATE_SEAL   
               0: NTLMSSP_NEGOTIATE_DATAGRAM
               0: NTLMSSP_NEGOTIATE_LM_KEY 
               0: NTLMSSP_NEGOTIATE_NETWARE
               1: NTLMSSP_NEGOTIATE_NTLM   
               0: NTLMSSP_NEGOTIATE_NT_ONLY
               0: NTLMSSP_ANONYMOUS        
               0: NTLMSSP_NEGOTIATE_OEM_DOMAIN_SUPPLIED
               0: NTLMSSP_NEGOTIATE_OEM_WORKSTATION_SUPPLIED
               0: NTLMSSP_NEGOTIATE_THIS_IS_LOCAL_CALL
               1: NTLMSSP_NEGOTIATE_ALWAYS_SIGN
               0: NTLMSSP_TARGET_TYPE_DOMAIN
               0: NTLMSSP_TARGET_TYPE_SERVER
               0: NTLMSSP_TARGET_TYPE_SHARE
               1: NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
               0: NTLMSSP_NEGOTIATE_IDENTIFY
               0: NTLMSSP_REQUEST_NON_NT_SESSION_KEY
               0: NTLMSSP_NEGOTIATE_TARGET_INFO
               1: NTLMSSP_NEGOTIATE_VERSION
               1: NTLMSSP_NEGOTIATE_128    
               1: NTLMSSP_NEGOTIATE_KEY_EXCH
               0: NTLMSSP_NEGOTIATE_56     
        DomainNameLen            : 0x0000 (0)
        DomainNameMaxLen         : 0x0000 (0)
        DomainName               : *
            DomainName               : ''
        WorkstationLen           : 0x0000 (0)
        WorkstationMaxLen        : 0x0000 (0)
        Workstation              : *
            Workstation              : ''
        Version: struct ntlmssp_VERSION
            ProductMajorVersion      : NTLMSSP_WINDOWS_MAJOR_VERSION_6 (6)
            ProductMinorVersion      : NTLMSSP_WINDOWS_MINOR_VERSION_1 (1)
            ProductBuild             : 0x0000 (0)
            Reserved: ARRAY(3)
                [0]                      : 0x00 (0)
                [1]                      : 0x00 (0)
                [2]                      : 0x00 (0)
            NTLMRevisionCurrent      : NTLMSSP_REVISION_W2K3 (15)
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
Got challenge flags:
Got NTLMSSP neg_flags=0x62898215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_TARGET_TYPE_DOMAIN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_TARGET_INFO
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62008215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
SPNEGO login failed: The attempted logon is invalid. This is either due to a bad username or authentication information.
got OID=1.3.6.1.4.1.311.2.2.30
got OID=1.2.840.48018.1.2.2
Starting GENSEC mechanism spnego
Starting GENSEC submechanism ntlmssp
     negotiate: struct NEGOTIATE_MESSAGE
        Signature                : 'NTLMSSP'
        MessageType              : NtLmNegotiate (1)
        NegotiateFlags           : 0x62088215 (1644724757)
               1: NTLMSSP_NEGOTIATE_UNICODE
               0: NTLMSSP_NEGOTIATE_OEM    
               1: NTLMSSP_REQUEST_TARGET   
               1: NTLMSSP_NEGOTIATE_SIGN   
               0: NTLMSSP_NEGOTIATE_SEAL   
               0: NTLMSSP_NEGOTIATE_DATAGRAM
               0: NTLMSSP_NEGOTIATE_LM_KEY 
               0: NTLMSSP_NEGOTIATE_NETWARE
               1: NTLMSSP_NEGOTIATE_NTLM   
               0: NTLMSSP_NEGOTIATE_NT_ONLY
               0: NTLMSSP_ANONYMOUS        
               0: NTLMSSP_NEGOTIATE_OEM_DOMAIN_SUPPLIED
               0: NTLMSSP_NEGOTIATE_OEM_WORKSTATION_SUPPLIED
               0: NTLMSSP_NEGOTIATE_THIS_IS_LOCAL_CALL
               1: NTLMSSP_NEGOTIATE_ALWAYS_SIGN
               0: NTLMSSP_TARGET_TYPE_DOMAIN
               0: NTLMSSP_TARGET_TYPE_SERVER
               0: NTLMSSP_TARGET_TYPE_SHARE
               1: NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
               0: NTLMSSP_NEGOTIATE_IDENTIFY
               0: NTLMSSP_REQUEST_NON_NT_SESSION_KEY
               0: NTLMSSP_NEGOTIATE_TARGET_INFO
               1: NTLMSSP_NEGOTIATE_VERSION
               1: NTLMSSP_NEGOTIATE_128    
               1: NTLMSSP_NEGOTIATE_KEY_EXCH
               0: NTLMSSP_NEGOTIATE_56     
        DomainNameLen            : 0x0000 (0)
        DomainNameMaxLen         : 0x0000 (0)
        DomainName               : *
            DomainName               : ''
        WorkstationLen           : 0x0000 (0)
        WorkstationMaxLen        : 0x0000 (0)
        Workstation              : *
            Workstation              : ''
        Version: struct ntlmssp_VERSION
            ProductMajorVersion      : NTLMSSP_WINDOWS_MAJOR_VERSION_6 (6)
            ProductMinorVersion      : NTLMSSP_WINDOWS_MINOR_VERSION_1 (1)
            ProductBuild             : 0x0000 (0)
            Reserved: ARRAY(3)
                [0]                      : 0x00 (0)
                [1]                      : 0x00 (0)
                [2]                      : 0x00 (0)
            NTLMRevisionCurrent      : NTLMSSP_REVISION_W2K3 (15)
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
Got challenge flags:
Got NTLMSSP neg_flags=0x62898215
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_TARGET_TYPE_DOMAIN
  NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY
  NTLMSSP_NEGOTIATE_TARGET_INFO
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 42 53 52 53 50 59 4C 20                             BSRSPYL  
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x62008a15
  NTLMSSP_NEGOTIATE_UNICODE
  NTLMSSP_REQUEST_TARGET
  NTLMSSP_NEGOTIATE_SIGN
  NTLMSSP_NEGOTIATE_NTLM
  NTLMSSP_ANONYMOUS
  NTLMSSP_NEGOTIATE_ALWAYS_SIGN
  NTLMSSP_NEGOTIATE_VERSION
  NTLMSSP_NEGOTIATE_128
  NTLMSSP_NEGOTIATE_KEY_EXCH
NTLMSSP Sign/Seal - using NTLM1
smb_signing_sign_pdu: sent SMB signature of
[0000] 00 00 00 00 00 00 00 00                             ........ 
smb_signing_sign_pdu: sent SMB signature of
[0000] 00 00 00 00 00 00 00 00                             ........ 
Could not connect to srvsvc pipe: NT_STATUS_ACCESS_DENIED
num_setup=0, max_setup=0, param_total=19, this_param=19, max_param=1024, data_total=0, this_data=0, max_data=65504, param_offset=92, param_pad=2, param_disp=0, data_offset=114, data_pad=3, data_disp=0
smb_signing_sign_pdu: sent SMB signature of
[0000] 00 00 00 00 00 00 00 00                             ........ 
NetShareEnum failed

[giulux]

Inseriti come hai fato i listati rendono il post troppo lungo e di difficile lettura.
In futuro incollali tra i tag [ code] e [ /code] che si creano cliccando su Codice in alto, sopra la finestra di scrittura (editor completo) così:

• [ code]listato
  da postare[ /code]

Correggi il post precedente cliccando su "modifica", poi seleziona il listato, clicca su Codice e salva, come da clip d'esempio.

[thece]

Posta l'output di questa ricerca

Codice: Seleziona tutto

dpkg -l | egrep 'samba|smb'
sudo find / -name "*smb.conf*" -exec ls -l '{}' \;

[giulux]

Jimmy_68a lo vuoi correggere il tuo post o no?

[Jimmy_68a]

per il comando dpkg -l | egrep ‘samba|smb’

Codice: Seleziona tutto

ii  libsmbclient:amd64                         2:4.7.6+dfsg~ubuntu-0ubuntu2.2              amd64        shared library for communication with SMB/CIFS servers
ii  libsmbios-c2                               2.4.1-1                                     amd64        Provide access to (SM)BIOS information -- dynamic library
ii  python-samba                               2:4.7.6+dfsg~ubuntu-0ubuntu2.2              amd64        Python bindings for Samba
ii  samba                                      2:4.7.6+dfsg~ubuntu-0ubuntu2.2              amd64        SMB/CIFS file, print, and login server for Unix
ii  samba-common                               2:4.7.6+dfsg~ubuntu-0ubuntu2.2              all          common files used by both the Samba server and client
ii  samba-common-bin                           2:4.7.6+dfsg~ubuntu-0ubuntu2.2              amd64        Samba common files used by both the server and the client
ii  samba-dsdb-modules                         2:4.7.6+dfsg~ubuntu-0ubuntu2.2              amd64        Samba Directory Services Database
ii  samba-libs:amd64                           2:4.7.6+dfsg~ubuntu-0ubuntu2.2              amd64        Samba core libraries
ii  samba-vfs-modules                          2:4.7.6+dfsg~ubuntu-0ubuntu2.2              amd64        Samba Virtual FileSystem plugins
ii  smbclient                                  2:4.7.6+dfsg~ubuntu-0ubuntu2.2              amd64        command-line SMB/CIFS clients for Unix

mentre per il comando sudo find / -name "*smb.conf*" -exec ls -l '{}' \;

Codice: Seleziona tutto

-rw-r--r-- 1 root root 9598 set 17 13:54 /etc/samba/smb.conf
-rw-r--r-- 1 root root 63 set 17 13:46 /etc/samba/smb.conf.ucf-old
-rw-r--r-- 1 root root 9542 set 17 13:46 /var/lib/ucf/cache/:etc:samba:smb.conf
-rw-r--r-- 1 root root 9542 ago  6 13:30 /usr/share/samba/smb.conf
-rw-r--r-- 1 root root 3137 lug  4  2017 /usr/share/doc/samba-common/examples/smb.conf.default.gz
-rw-r--r-- 1 root root 188 apr  1 08:40 /usr/share/doc/nautilus-share/examples/smb.conf
-rw-r--r-- 1 root root 110335 ago  6 13:30 /usr/share/man/man5/smb.conf.5.gz
find: ‘/run/user/1000/gvfs’: Permesso negato

Scusate

[thece]

Codice: Seleziona tutto

cat /etc/samba/smb.conf

[Jimmy_68a]

Ecco il risultato

Codice: Seleziona tutto

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

client min protocolo = SMB2
client max protocolo = SMB3
## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

[thece]

Hai modificato il file /etc/samba/smb.conf inserendo degli errori. Questo comando dovrebbe evidenziarli

Codice: Seleziona tutto

testparm -sv

[Jimmy_68a]

Ho corretto gli errori che sono riuscito a vedere dopodichè questo è l'output del comando testparm -sv

Codice: Seleziona tutto

Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
WARNING: The "syslog" option is deprecated
Processing section "[printers]"
Processing section "[print$]"
Loaded services file OK.
WARNING: The 'netbios name' is too long (max. 15 chars).

Server role: ROLE_STANDALONE

# Global parameters
[global]
	abort shutdown script = 
	add group script = 
	add machine script = 
	addport command = 
	addprinter command = 
	add share command = 
	add user script = 
	add user to group script = 
	afs token lifetime = 604800
	afs username map = 
	aio max threads = 100
	algorithmic rid base = 1000
	allow dcerpc auth level connect = No
	allow dns updates = secure only
	allow insecure wide links = No
	allow nt4 crypto = No
	allow trusted domains = Yes
	allow unsafe cluster upgrade = No
	async smb echo handler = No
	auth event notification = No
	auth methods = 
	auto services = 
	bind interfaces only = No
	browse list = Yes
	cache directory = /var/cache/samba
	change notify = Yes
	change share command = 
	check password script = 
	cldap port = 389
	client ipc max protocol = default
	client ipc min protocol = default
	client ipc signing = default
	client lanman auth = No
	client ldap sasl wrapping = sign
	client max protocol = SMB3
	client min protocol = SMB2
	client NTLMv2 auth = Yes
	client plaintext auth = No
	client schannel = Auto
	client signing = default
	client use spnego principal = No
	client use spnego = Yes
	cluster addresses = 
	clustering = No
	config backend = file
	config file = 
	create krb5 conf = Yes
	ctdbd socket = 
	ctdb locktime warn threshold = 0
	ctdb timeout = 0
	cups connection timeout = 30
	cups encrypt = No
	cups server = 
	dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr, netlogon, lsarpc, drsuapi, dssetup, unixinfo, browser, eventlog6, backupkey, dnsserver
	deadtime = 0
	debug class = No
	debug hires timestamp = Yes
	debug pid = No
	debug prefix timestamp = No
	debug uid = No
	dedicated keytab file = 
	default service = 
	defer sharing violations = Yes
	delete group script = 
	deleteprinter command = 
	delete share command = 
	delete user from group script = 
	delete user script = 
	dgram port = 138
	disable netbios = No
	disable spoolss = No
	dns forwarder = 
	dns proxy = No
	dns update command = /usr/sbin/samba_dnsupdate
	domain logons = No
	domain master = Auto
	dos charset = CP850
	enable asu support = No
	enable core files = Yes
	enable privileges = Yes
	encrypt passwords = Yes
	enhanced browsing = Yes
	enumports command = 
	eventlog list = 
	get quota command = 
	getwd cache = Yes
	guest account = nobody
	homedir map = auto.home
	host msdfs = Yes
	hostname lookups = No
	idmap backend = tdb
	idmap cache time = 604800
	idmap gid = 
	idmap negative cache time = 120
	idmap uid = 
	include system krb5 conf = Yes
	init logon delay = 100
	init logon delayed hosts = 
	interfaces = 
	iprint server = 
	keepalive = 300
	kerberos encryption types = all
	kerberos method = default
	kernel change notify = Yes
	kpasswd port = 464
	krb5 port = 88
	lanman auth = No
	large readwrite = Yes
	ldap admin dn = 
	ldap connection timeout = 2
	ldap debug level = 0
	ldap debug threshold = 10
	ldap delete dn = No
	ldap deref = auto
	ldap follow referral = Auto
	ldap group suffix = 
	ldap idmap suffix = 
	ldap machine suffix = 
	ldap page size = 1000
	ldap passwd sync = no
	ldap replication sleep = 1000
	ldap server require strong auth = Yes
	ldap ssl = start tls
	ldap ssl ads = No
	ldap suffix = 
	ldap timeout = 15
	ldap user suffix = 
	lm announce = Auto
	lm interval = 60
	load printers = Yes
	local master = Yes
	lock directory = /var/run/samba
	lock spin time = 200
	log file = /var/log/samba/log.%m
	logging = 
	log level = 2
	log nt token command = 
	logon drive = 
	logon home = \\%N\%U
	logon path = \\%N\%U\profile
	logon script = 
	log writeable files on exit = No
	lpq cache time = 30
	lsa over netlogon = No
	machine password timeout = 604800
	mangle prefix = 1
	mangling method = hash2
	map to guest = Bad User
	map untrusted to domain = Auto
	max disk size = 0
	max log size = 1000
	max mux = 50
	max open files = 16384
	max smbd processes = 0
	max stat cache size = 256
	max ttl = 259200
	max wins ttl = 518400
	max xmit = 16644
	message command = 
	min receivefile size = 0
	min wins ttl = 21600
	mit kdc command = 
	multicast dns register = Yes
	name cache timeout = 660
	name resolve order = lmhosts wins host bcast
	nbt client socket address = 0.0.0.0
	nbt port = 137
	ncalrpc dir = /var/run/samba/ncalrpc
	netbios aliases = 
	netbios name = GIORGIO-LENOVO-V110-15IAP
	netbios scope = 
	neutralize nt4 emulation = No
	NIS homedir = No
	nmbd bind explicit broadcast = Yes
	nsupdate command = /usr/bin/nsupdate -g
	ntlm auth = ntlmv2-only
	nt pipe support = Yes
	ntp signd socket directory = /var/lib/samba/ntp_signd
	nt status support = Yes
	null passwords = No
	obey pam restrictions = Yes
	old password allowed period = 60
	oplock break wait time = 0
	os2 driver map = 
	os level = 20
	pam password change = Yes
	panic action = /usr/share/samba/panic-action %d
	passdb backend = tdbsam
	passdb expand explicit = No
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
	passwd chat debug = No
	passwd chat timeout = 2
	passwd program = /usr/bin/passwd %u
	password hash gpg key ids = 
	password hash userPassword schemes = 
	password server = *
	perfcount module = 
	pid directory = /var/run/samba
	preferred master = Auto
	preload modules = 
	printcap cache time = 750
	printcap name = 
	private dir = /var/lib/samba/private
	raw NTLMv2 auth = No
	read raw = Yes
	realm = 
	registry shares = No
	reject md5 clients = No
	reject md5 servers = No
	remote announce = 
	remote browse sync = 
	rename user script = 
	require strong key = Yes
	reset on zero vc = No
	restrict anonymous = 0
	rndc command = /usr/sbin/rndc
	root directory = 
	rpc big endian = No
	rpc server dynamic port range = 49152-65535
	rpc server port = 0
	samba kcc command = /usr/sbin/samba_kcc
	security = AUTO
	server max protocol = SMB3
	server min protocol = LANMAN1
	server multi channel support = No
	server role = standalone server
	server schannel = Auto
	server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbindd, ntp_signd, kcc, dnsupdate, dns
	server signing = default
	server string = %h server (Samba, Ubuntu)
	set primary group script = 
	set quota command = 
	share backend = classic
	show add printer wizard = Yes
	shutdown script = 
	smb2 leases = Yes
	smb2 max credits = 8192
	smb2 max read = 8388608
	smb2 max trans = 8388608
	smb2 max write = 8388608
	smbd profiling level = off
	smb passwd file = /etc/samba/smbpasswd
	smb ports = 445 139
	socket options = TCP_NODELAY
	spn update command = /usr/sbin/samba_spnupdate
	stat cache = Yes
	state directory = /var/lib/samba
	svcctl list = 
	syslog = 0
	syslog only = No
	template homedir = /home/%D/%U
	template shell = /bin/false
	time server = No
	timestamp logs = Yes
	tls cafile = tls/ca.pem
	tls certfile = tls/cert.pem
	tls crlfile = 
	tls dh params file = 
	tls enabled = Yes
	tls keyfile = tls/key.pem
	tls priority = NORMAL:-VERS-SSL3.0
	tls verify peer = as_strict_as_possible
	unicode = Yes
	unix charset = UTF-8
	unix extensions = Yes
	unix password sync = Yes
	use mmap = Yes
	username level = 0
	username map = 
	username map cache time = 0
	username map script = 
	usershare allow guests = Yes
	usershare max shares = 100
	usershare owner only = Yes
	usershare path = /var/lib/samba/usershares
	usershare prefix allow list = 
	usershare prefix deny list = 
	usershare template share = 
	use spnego = Yes
	utmp = No
	utmp directory = 
	web port = 901
	winbind cache time = 300
	winbindd socket directory = /var/run/samba/winbindd
	winbind enum groups = No
	winbind enum users = No
	winbind expand groups = 0
	winbind max clients = 200
	winbind max domain connections = 1
	winbind nested groups = Yes
	winbind normalize names = No
	winbind nss info = template
	winbind offline logon = No
	winbind reconnect delay = 30
	winbind refresh tickets = No
	winbind request timeout = 60
	winbind rpc only = No
	winbind sealed pipes = Yes
	winbind separator = \
	winbind trusted domains only = No
	winbind use default domain = No
	wins hook = 
	wins proxy = No
	wins server = 
	wins support = No
	workgroup = WORKGROUP
	write raw = Yes
	wtmp directory = 
	idmap config * : backend = tdb
	access based share enum = No
	acl allow execute always = No
	acl check permissions = Yes
	acl group control = No
	acl map full control = Yes
	administrative share = No
	admin users = 
	afs share = No
	aio read size = 0
	aio write behind = 
	aio write size = 0
	allocation roundup size = 1048576
	available = Yes
	blocking locks = Yes
	block size = 1024
	browseable = Yes
	case sensitive = Auto
	comment = 
	copy = 
	create mask = 0744
	csc policy = manual
	cups options = 
	default case = lower
	default devmode = Yes
	delete readonly = No
	delete veto files = No
	dfree cache time = 0
	dfree command = 
	directory mask = 0755
	directory name cache size = 100
	dmapi support = No
	dont descend = 
	dos filemode = No
	dos filetime resolution = No
	dos filetimes = Yes
	durable handles = Yes
	ea support = No
	fake directory create times = No
	fake oplocks = No
	follow symlinks = Yes
	force create mode = 0000
	force directory mode = 0000
	force group = 
	force printername = No
	force unknown acl user = No
	force user = 
	fstype = NTFS
	guest ok = No
	guest only = No
	hide dot files = Yes
	hide files = 
	hide special files = No
	hide unreadable = No
	hide unwriteable files = No
	hosts allow = 
	hosts deny = 
	include = 
	inherit acls = No
	inherit owner = no
	inherit permissions = No
	invalid users = 
	kernel oplocks = No
	kernel share modes = Yes
	level2 oplocks = Yes
	locking = Yes
	lppause command = 
	lpq command = %p
	lpresume command = 
	lprm command = 
	magic output = 
	magic script = 
	mangled names = yes
	mangling char = ~
	map acl inherit = No
	map archive = Yes
	map hidden = No
	map readonly = yes
	map system = No
	max connections = 0
	max print jobs = 1000
	max reported print jobs = 0
	min print space = 0
	msdfs proxy = 
	msdfs root = No
	msdfs shuffle referrals = No
	nt acl support = Yes
	ntvfs handler = unixuid, default
	oplock contention limit = 2
	oplocks = Yes
	path = 
	posix locking = Yes
	postexec = 
	preexec = 
	preexec close = No
	preserve case = Yes
	printable = No
	print command = 
	printer name = 
	printing = cups
	printjob username = %U
	print notify backchannel = No
	profile acls = No
	queuepause command = 
	queueresume command = 
	read list = 
	read only = Yes
	root postexec = 
	root preexec = 
	root preexec close = No
	short preserve case = Yes
	smb encrypt = default
	spotlight = No
	store dos attributes = No
	strict allocate = No
	strict locking = Auto
	strict rename = No
	strict sync = Yes
	sync always = No
	use client driver = No
	use sendfile = No
	valid users = 
	veto files = 
	veto oplock files = 
	vfs objects = 
	volume = 
	wide links = No
	write cache size = 0
	write list = 


[printers]
	browseable = No
	comment = All Printers
	create mask = 0700
	path = /var/spool/samba
	printable = Yes


[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers

Poi ho provato ad accedere alle risorse della rete windows ma continua a dirmi che la cartella è vuota

[thece]

Togli queste due righe

Codice: Seleziona tutto

client min protocol = SMB2
client max protocol = SMB3

dal file di configurazione /etc/samba/smb.conf (oppure visto che in pratica non hai fatto alcuna modifica, ripristina il file di configurazione originale)

Codice: Seleziona tutto

sudo cp /usr/share/samba/smb.conf /etc/samba/smb.conf

Riavvia Samba

Codice: Seleziona tutto

sudo systemctl restart nmbd
sudo systemctl restart smbd

e riprova

Codice: Seleziona tutto

smbtree -b -N -S

se non restituisce nulla

Codice: Seleziona tutto

smbtree -d 10 -b -N -S

[Jimmy_68a]

Reinstallato.
al comando smbtree- b- N -S restituisce

INTROFORNO
\\PCSALA1

Comunque mi da cartella vuota

[thece]

A me non sembra ... PCSALA1 si vede, se come credo è un PC Windows, per vedere i suoi share molto probabilmente ti devi autenticare ... dipende da come hai impostato gli share su Windows.

[Jimmy_68a]

Probabilmente si.
Ma senza modificare nulla fino a che non ho fatto l'aggiornamento a 18.04 funzionava tutto.
Controllo un pò e ti faccio sapere

[Jimmy_68a]

Scusa ma a causa di un errato comando ho dovuto formattare e reinstallare tutto.
Ho ripercorso i passi che mi avevi indicato ma quando faccio ripartire samba con i comandi
sudo systemctl restart nmbd e
sudo systemctl restart smbd
mi dice
Unit nmbd.service not found e
Unit nmbd.service not found
facendo il ping non trova niente ma le stampanti della rete me le vede....

[Jimmy_68a]

Scusa facendo il ping mi trova tranquillamente gli altri pc