ok grazie, attendo il fixthece ha scritto: ↑domenica 10 maggio 2020, 22:02Sembra che su Ubuntu 20.04 ci sia un bug che non permette a Nautilus di gestire correttamente sgli share Samba.
https://bugs.launchpad.net/ubuntu/+sour ... ug/1872476
[Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
-
- Prode Principiante
- Messaggi: 172
- Iscrizione: sabato 29 maggio 2010, 4:54
- Distribuzione: ubuntu 64bit
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
AMD Ryzen 5 2400G with Radeon Vega graphics, AMD Raven
16GB ram, ssd samsung evo 500GB, tv led hdmi
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
-
- Prode Principiante
- Messaggi: 5
- Iscrizione: martedì 1 dicembre 2020, 20:51
- Desktop: Ubuntu
- Distribuzione: Ubuntu 20.10
- Sesso: Maschile
Re: dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
Mitico! Avevo lo stesso identico problema dopo aver installato Ubuntu 20.10 sul mio Imac 2010 e ho risolto seguendo le tue indicazioni, grazie mille davvero!thece ha scritto: ↑sabato 25 aprile 2020, 16:15Nella tua Home Directory prova a creare il file /home/$USER/.smb/smb.conf
Apri il file con un editor di testiCodice: Seleziona tutto
mkdir -p /home/$USER/.smb/ touch /home/$USER/.smb/smb.conf
ed incollaci dentro il seguente contenutoCodice: Seleziona tutto
gedit /home/$USER/.smb/smb.conf
Salva il file. Chiudi l'editor e riprova con NautilusCodice: Seleziona tutto
[global] client min protocol = NT1 client max protocol = SMB3
-
- Entusiasta Emergente
- Messaggi: 1892
- Iscrizione: sabato 1 aprile 2006, 16:10
- Distribuzione: kubuntu 22.04
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
Buona serata e grazie del tuo aiuto
-
- Prode Principiante
- Messaggi: 12
- Iscrizione: lunedì 29 febbraio 2016, 13:11
- Distribuzione: Ubuntu 20.04
- Sesso: Maschile
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
al comando:
Codice: Seleziona tutto
sudo nmap -p 139,445 --script smb-protocols INDIRIZZO_IP_NAS
questo è il risultato
$ sudo nmap -p 139,445 --script smb-protocols 192.168.178.30
[sudo] password di max:
Starting Nmap 7.80 ( https://nmap.org ) at 2021-01-16 17:47 CET
Nmap scan report for symax.fritz.box (192.168.178.30)
Host is up (0.00065s latency).
PORT STATE SERVICE
139/tcp open netbios-ssn
445/tcp open microsoft-ds
MAC Address: 00:11:32:61:A9:F9 (Synology Incorporated)
Host script results:
| smb-protocols:
| dialects:
| NT LM 0.12 (SMBv1) [dangerous, but default]
|_ 2.02
Nmap done: 1 IP address (1 host up) scanned in 0.92 seconds
-
- Prode Principiante
- Messaggi: 12
- Iscrizione: lunedì 29 febbraio 2016, 13:11
- Distribuzione: Ubuntu 20.04
- Sesso: Maschile
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
-
- Prode Principiante
- Messaggi: 12
- Iscrizione: lunedì 29 febbraio 2016, 13:11
- Distribuzione: Ubuntu 20.04
- Sesso: Maschile
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
Codice: Seleziona tutto
sudo nmap -p 139,445 --script smb-protocols 192.168.178.30
Starting Nmap 7.91 ( https://nmap.org ) at 2021-02-21 13:15 CET
Nmap scan report for symax.fritz.box (192.168.178.30)
Host is up (0.00060s latency).
PORT STATE SERVICE
139/tcp open netbios-ssn
445/tcp open microsoft-ds
MAC Address: 00:11:32:61:A9:F9 (Synology Incorporated)
Host script results:
| smb-protocols:
| dialects:
| NT LM 0.12 (SMBv1) [dangerous, but default]
| 2.02
| 2.10
| 3.00
| 3.02
|_ 3.11
Aiuto
- thece
- Tenace Tecnocrate
- Messaggi: 12948
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
l'output che hai postato (male) mostra solamente i protocolli attivi su tuo NAS, niente altro.
Puoi postare qualche altra evidenza? Magari il problema è altrove.
Frase di rito: come avrai sicuramente già visto in giro per il Forum, per rendere più comprensibile la discussione, dovresti formattare correttamente sia i comandi sia i relativi output racchiudendoli tra i tag [ code ] ... [ /code ] (scritti senza spazi) in modo da ottenere un qualcosa del genere
Codice: Seleziona tutto
COMANDO
...
OUTPUT
...
Sei invitato a modificare il tuo precedente post.
- thece
- Tenace Tecnocrate
- Messaggi: 12948
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
Riposta tutto il contenuto del file
Codice: Seleziona tutto
cat /etc/samba/smb.conf
Codice: Seleziona tutto
testparm -sv | grep protocol
Codice: Seleziona tutto
cat /home/$USER/.smb/smb.conf
Se dal file manager apri la barra degli indirizzi e scrivi direttamente l'URL
Codice: Seleziona tutto
smb://symax.local
Posta anche
Codice: Seleziona tutto
nslookup symax.local
-
- Prode Principiante
- Messaggi: 12
- Iscrizione: lunedì 29 febbraio 2016, 13:11
- Distribuzione: Ubuntu 20.04
- Sesso: Maschile
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
per cat /etc/samba/smb.conf
Codice: Seleziona tutto
max@1:~$ cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
client min protocol = NT1
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
logging = file
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap config * : backend = tdb
; idmap config * : range = 3000-7999
; idmap config YOURDOMAINHERE : backend = tdb
; idmap config YOURDOMAINHERE : range = 100000-999999
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 means that usershare is disabled.
# usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
Codice: Seleziona tutto
max@1:~$ testparm -sv | grep protocol
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
Server role: ROLE_STANDALONE
client ipc max protocol = default
client ipc min protocol = default
client max protocol = default
client min protocol = NT1
server max protocol = SMB3
server min protocol = SMB2_02
Codice: Seleziona tutto
max@1:~$ cat /home/$USER/.smb/smb.conf
[global]
client min protocol = NT1
client max protocol = SMB3
Codice: Seleziona tutto
max@1:~$ nslookup symax.local
Server: 127.0.0.53
Address: 127.0.0.53#53
Non-authoritative answer:
Name: symax.local
Address: 40.68.249.35
** server can't find symax.local: NXDOMAIN
- thece
- Tenace Tecnocrate
- Messaggi: 12948
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
io direi che il tuo è diventato un problema di risoluzione dei nomi (DNS), non di Samba.masret ha scritto: ↑domenica 21 febbraio 2021, 21:43Codice: Seleziona tutto
max@1:~$ nslookup symax.local Server: 127.0.0.53 Address: 127.0.0.53#53 Non-authoritative answer: Name: symax.local Address: 40.68.249.35 ** server can't find symax.local: NXDOMAIN
Il nome del tuo NAS (symax.local) viene risolto con un indirizzo IP pubblico (40.68.249.35) e non con un indirizzo IP privato, interno alla tua LAN.
Posta l'output di questi comandi
Codice: Seleziona tutto
nmcli
cat /etc/resolv.conf
sudo netstat -tulnp | grep 53
systemd-resolve --no-pager --status
Codice: Seleziona tutto
smb://symax
Codice: Seleziona tutto
nslookup symax
-
- Prode Principiante
- Messaggi: 12
- Iscrizione: lunedì 29 febbraio 2016, 13:11
- Distribuzione: Ubuntu 20.04
- Sesso: Maschile
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
Codice: Seleziona tutto
max@1:~$ nmcli
enp3s0: collegato to Connessione via cavo 1
"Realtek RTL8111/8168/8411"
ethernet (r8169), D4:3D:7E:16:78:11, hw, mtu 1500
predefinito ip4
inet4 192.168.178.45/24
route4 0.0.0.0/0
route4 192.168.178.0/24
route4 169.254.0.0/16
inet6 fe80::696c:85f9:1371:678e/64
route6 fe80::/64
route6 ff00::/8
lo: non gestito
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
DNS configuration:
servers: 192.168.178.1
domains: fritz.box
interface: enp3s0
Usare «nmcli device show» per ottenere informazioni sui dispositivi no>
«nmcli connection show» per ottenere una panoramica sui profili di con>
attivi.
Per maggiori informazioni sull'utilizzo, consultare le pagine di manua>
e nmcli-examples(7).
lines 5-27/27 (END)
Codice: Seleziona tutto
max@1:~$ cat /etc/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "resolvectl status" to see details about the uplink DNS servers
# currently in use.
#
# Third party programs should typically not access this file directly, but only
# through the symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a
# different way, replace this symlink by a static file or a different symlink.
#
# See man:systemd-resolved.service(8) for details about the supported modes of
# operation for /etc/resolv.conf.
nameserver 127.0.0.53
options edns0 trust-ad
search fritz.box
max@1:~$
Codice: Seleziona tutto
max@1:~$ sudo netstat -tulnp | grep 53
[sudo] password di max:
sudo: netstat: comando non trovato
Codice: Seleziona tutto
max@1:~$ systemd-resolve --no-pager --status
Global
LLMNR setting: no
MulticastDNS setting: no
DNSOverTLS setting: no
DNSSEC setting: no
DNSSEC supported: no
Link 2 (enp3s0)
Current Scopes: DNS
DefaultRoute setting: yes
LLMNR setting: yes
MulticastDNS setting: no
DNSOverTLS setting: no
DNSSEC setting: no
DNSSEC supported: no
Current DNS Server: 192.168.178.1
DNS Servers: 192.168.178.1
DNS Domain: ~.
fritz.box
Codice: Seleziona tutto
max@1:~$ nslookup symax
Server: 127.0.0.53
Address: 127.0.0.53#53
Non-authoritative answer:
Name: symax.fritz.box
Address: 192.168.178.30
- thece
- Tenace Tecnocrate
- Messaggi: 12948
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
La funzionalità di esplorazione della rete appende (sbagliando) il suffisso "local" ai nomi dei dispositivi presenti nella tua LAN, mentre il suffisso correntemente configurato sulla tua LAN (*) è "fritz.box". Ne consegue che su questo PC la funzionalità di esplorazione della rete sbaglia i nomi dei dispositivi.
(*) è un'impostazione presente nel pannello di controllo sul tuo router Fritz Box
Prova (non sono sicuro che funzioni) a modificare il file /etc/avahi/avahi-daemon.conf
Codice: Seleziona tutto
sudo gedit /etc/avahi/avahi-daemon.conf
Codice: Seleziona tutto
#domain-name=local
Codice: Seleziona tutto
domain-name=fritz.box
Una strada alternativa potrebbe essere modificare il suffisso "fritz.box" in "local" nelle impostazioni presenti nel pannello di controllo sul tuo router Fritz Box.
Questa impostazione dovrebbe essere: Pannello di Controllo > Rete Locale > Nome Fritz!Box . Se Nome Fritz!Box è vuoto dovrebbe essere usato di default "fritz.box". Prova a cambiarlo in "local".
Questa modifica impatta su tutta la LAN, quindi per farla recepire devi riavviare tutto.
-
- Rampante Reduce
- Messaggi: 5460
- Iscrizione: domenica 20 gennaio 2008, 1:13
- Desktop: Kubuntu
- Distribuzione: 20.04 x64
- Contatti:
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
O fare un refresh forzato del DHCP con svuotamento della cache del resolver DNS. A volte basta spegnere e riaccendere la scheda di rete per farlo.
Secondo Principio di Dilbert, di Scott Adams. "Si parte dalla certezza che siamo tutti idioti". Ed alcuni su questo mi ab-battono alla grande.
Come certificato dalla moderazione, incivile e maleducato. You have been warned.
- thece
- Tenace Tecnocrate
- Messaggi: 12948
- Iscrizione: lunedì 23 aprile 2007, 14:16
- Distribuzione: Debian 12 (Bookworm) - KDE
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
-
- Rampante Reduce
- Messaggi: 5460
- Iscrizione: domenica 20 gennaio 2008, 1:13
- Desktop: Kubuntu
- Distribuzione: 20.04 x64
- Contatti:
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
La cosa va completamente a pallino se la configurazione del DHCP server impone come server DNS un host esterno alla rete
A furia di imboccare per ogni passo l'utenza diventiamo noi il cucchiaio e si mettono a frignare se non arriva l'imboccata...
Secondo Principio di Dilbert, di Scott Adams. "Si parte dalla certezza che siamo tutti idioti". Ed alcuni su questo mi ab-battono alla grande.
Come certificato dalla moderazione, incivile e maleducato. You have been warned.
-
- Prode Principiante
- Messaggi: 12
- Iscrizione: lunedì 29 febbraio 2016, 13:11
- Distribuzione: Ubuntu 20.04
- Sesso: Maschile
Re: [Risolto]dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
Grazie mille Thece cambiando le impostazioni del router riesco ad entrare nelle cartelle .thece ha scritto: ↑lunedì 22 febbraio 2021, 11:01Una strada alternativa potrebbe essere modificare il suffisso "fritz.box" in "local" nelle impostazioni presenti nel pannello di controllo sul tuo router Fritz Box.
Questa impostazione dovrebbe essere: Pannello di Controllo > Rete Locale > Nome Fritz!Box . Se Nome Fritz!Box è vuoto dovrebbe essere usato di default "fritz.box". Prova a cambiarlo in "local".
Questa modifica impatta su tutta la LAN, quindi per farla recepire devi riavviare tutto.
Suona inutile lo so, vista la virtualità del contatto, ma sono in debito. Grazie di nuovo
-
- Prode Principiante
- Messaggi: 2
- Iscrizione: domenica 23 novembre 2008, 0:34
- Desktop: ubuntu
- Distribuzione: ubuntu 13.10 32 bit
Re: dopo aggiornamento a 20.04 non riesco più a collegarmi al NAS
Fantastico, problema risolto e funziona a meravigliathece ha scritto: ↑sabato 25 aprile 2020, 16:15Nella tua Home Directory prova a creare il file /home/$USER/.smb/smb.conf
Apri il file con un editor di testiCodice: Seleziona tutto
mkdir -p /home/$USER/.smb/ touch /home/$USER/.smb/smb.conf
ed incollaci dentro il seguente contenutoCodice: Seleziona tutto
gedit /home/$USER/.smb/smb.conf
Salva il file. Chiudi l'editor e riprova con NautilusCodice: Seleziona tutto
[global] client min protocol = NT1 client max protocol = SMB3
grazie
Chi c’è in linea
Visualizzano questa sezione: Google [Bot] e 6 ospiti