Pagina 1 di 1

problema porta amule

Inviato: mercoledì 9 maggio 2007, 20:08
da Marbell
CIAO a tutti io sono collegato a una rete wireless e ottengo un lowid credo sia a causa delle porta UDp e UTC poichè non più di una settimana fa avevo un ID alto. Di solito anche quando usavo windsoz per avere un id alto dovevo scegliere tra le porte 4000/1 5000/1 6000/1 ora provandole tutte e tre non ottengo nulla...cosa posso fare?

Re: problema porta amule

Inviato: mercoledì 9 maggio 2007, 21:04
da madebyn
molto probabilmente è il firewall che ti blocca.

posta qui "sudo iptables -L", se ci entra :-)

Re: problema porta amule

Inviato: mercoledì 9 maggio 2007, 23:32
da saxtro
potrebbe anche essere un problema di NAT dell' apparato wireless

Re: problema porta amule

Inviato: giovedì 10 maggio 2007, 17:11
da Marbell
madebyn ha scritto: molto probabilmente è il firewall che ti blocca.

posta qui "sudo iptables -L", se ci entra :-)
però non il firewall...comunque

Codice: Seleziona tutto

Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destinatio

Re: problema porta amule

Inviato: giovedì 10 maggio 2007, 17:20
da sandvik86
hai IP asegnato da dhcp e nn riservato??
magari il dhcp rinnovando il leasing dell'ip te l'ha cambiato! e quindi la porta è si mappata ma sul tuo vecchio ip....

Re: problema porta amule

Inviato: giovedì 10 maggio 2007, 17:31
da whyle
Ho un problema molto simile, in pratica se ad  aMule  cambio il numero di porte da  quello di default mi da sempre Id basso anche se ho aperto le porte sia sul  firewall che sul router e questo mi succede anche se adopero emule con wine.Le porte che ho provato sia come TCP che come UDP sono : 1755, 7070,5060 ecc..... Vi posto il risultato del comando sudo iptables -L sperando che qualcuno mi possa aiutare. Logicamente le porte che ho provato con aMule su xp ,con eMule, vanno benissimo quindi penso che il router sia configurato a dovere. Caio.

Codice: Seleziona tutto

Chain INPUT (policy DROP)
target     prot opt source               destination         
ACCEPT     tcp  --  RTA230.home          anywhere            tcp flags:!FIN,SYN,RST,ACK/SYN 
ACCEPT     udp  --  RTA230.home          anywhere            
ACCEPT     0    --  anywhere             anywhere            
ACCEPT     icmp --  anywhere             anywhere            limit: avg 10/sec burst 5 
DROP       0    --  anywhere             255.255.255.255     
DROP       0    --  anywhere             192.168.1.255       
DROP       0    --  BASE-ADDRESS.MCAST.NET/8  anywhere            
DROP       0    --  anywhere             BASE/8              
DROP       0    --  255.255.255.255      anywhere            
DROP       0    --  anywhere             0.0.0.0             
DROP       0    --  anywhere             anywhere            state INVALID 
LSI        0    -f  anywhere             anywhere            limit: avg 10/min burst 5 
INBOUND    0    --  anywhere             anywhere            
LOG_FILTER  0    --  anywhere             anywhere            
LOG        0    --  anywhere             anywhere            LOG level info prefix `Unknown Input' 

Chain FORWARD (policy DROP)
target     prot opt source               destination         
ACCEPT     icmp --  anywhere             anywhere            limit: avg 10/sec burst 5 
LOG_FILTER  0    --  anywhere             anywhere            
LOG        0    --  anywhere             anywhere            LOG level info prefix `Unknown Forward' 

Chain OUTPUT (policy DROP)
target     prot opt source               destination         
ACCEPT     tcp  --  192.168.1.2          RTA230.home         tcp dpt:domain 
ACCEPT     udp  --  192.168.1.2          RTA230.home         udp dpt:domain 
ACCEPT     0    --  anywhere             anywhere            
DROP       0    --  BASE/8               anywhere            
DROP       0    --  anywhere             BASE/8              
DROP       0    --  255.255.255.255      anywhere            
DROP       0    --  anywhere             0.0.0.0             
DROP       0    --  anywhere             anywhere            state INVALID 
OUTBOUND   0    --  anywhere             anywhere            
LOG_FILTER  0    --  anywhere             anywhere            
LOG        0    --  anywhere             anywhere            LOG level info prefix `Unknown Output' 

Chain INBOUND (1 references)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere            state RELATED,ESTABLISHED 
ACCEPT     udp  --  anywhere             anywhere            state RELATED,ESTABLISHED 
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:7070 
ACCEPT     udp  --  anywhere             anywhere            udp dpt:7070 
ACCEPT     tcp  --  anywhere             anywhere            tcp dpts:6881:6889 
ACCEPT     udp  --  anywhere             anywhere            udp dpts:6881:6889 
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:6969 
ACCEPT     udp  --  anywhere             anywhere            udp dpt:6969 
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:1755 
ACCEPT     udp  --  anywhere             anywhere            udp dpt:1755 
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:sip 
ACCEPT     udp  --  anywhere             anywhere            udp dpt:sip 
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:sip-tls 
ACCEPT     udp  --  anywhere             anywhere            udp dpt:sip-tls 
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:4662 
ACCEPT     udp  --  anywhere             anywhere            udp dpt:4662 
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:4672 
ACCEPT     udp  --  anywhere             anywhere            udp dpt:4672 
LSI        0    --  anywhere             anywhere            

Chain LOG_FILTER (5 references)
target     prot opt source               destination         

Chain LSI (2 references)
target     prot opt source               destination         
LOG_FILTER  0    --  anywhere             anywhere            
LOG        tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,RST,ACK/SYN limit: avg 1/sec burst 5 LOG level info prefix `Inbound ' 
DROP       tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,RST,ACK/SYN 
LOG        tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,RST,ACK/RST limit: avg 1/sec burst 5 LOG level info prefix `Inbound ' 
DROP       tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,RST,ACK/RST 
LOG        icmp --  anywhere             anywhere            icmp echo-request limit: avg 1/sec burst 5 LOG level info prefix `Inbound ' 
DROP       icmp --  anywhere             anywhere            icmp echo-request 
LOG        0    --  anywhere             anywhere            limit: avg 5/sec burst 5 LOG level info prefix `Inbound ' 
DROP       0    --  anywhere             anywhere            

Chain LSO (0 references)
target     prot opt source               destination         
LOG_FILTER  0    --  anywhere             anywhere            
LOG        0    --  anywhere             anywhere            limit: avg 5/sec burst 5 LOG level info prefix `Outbound ' 
REJECT     0    --  anywhere             anywhere            reject-with icmp-port-unreachable 

Chain OUTBOUND (1 references)
target     prot opt source               destination         
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere            state RELATED,ESTABLISHED 
ACCEPT     udp  --  anywhere             anywhere            state RELATED,ESTABLISHED 
ACCEPT     0    --  anywhere             anywhere            

Re: problema porta amule

Inviato: giovedì 10 maggio 2007, 17:37
da Marbell
sandvik86 ha scritto: hai IP asegnato da dhcp e nn riservato??
magari il dhcp rinnovando il leasing dell'ip te l'ha cambiato! e quindi la porta è si mappata ma sul tuo vecchio ip....
sì se non capisco male ciò che dici il mio IP cambia ogni volta che riavvio il router ma le porte dovrei poterle scegliere tra le 3 che ti dicevo prima...almeno fino a una settimana fa succedeva così...

Re: problema porta amule

Inviato: giovedì 10 maggio 2007, 17:47
da Marbell
CANE CAVEM

boh adesso funzione...le ho ricambiate e ora fva...cavolo 2 secondo dopo aver avuto l'IP alto stavo già scaricando a 50kb con IP basso dopo una notte ero ancora a 0