samsung nc10 - vari "problemi con xubuntu"

[BrianDJ]

ciao a tutti, ho questo piccolo gingillo da tempo ormai, aveva su winZozz (bad) e ora si ritrova con la fantastica distro xubuntu (yes)

ma ho un paio di quesiti da farvi, spero che possiate aiutarmi, anche perchè ho provato il tasto cerca ma non mi ha dato i risultati sperati.

in pratica uso il modem interno (3g embedded o una roba simile) e lancia le connessioni regolarmente...
però c'è un problemino, ogni volta che lancio la connessione e apro firefox, mi dà la classica pagina d'errore come se il pc non si fosse mai connesso!!! "server non trovato"

Per risolvere, devo disconnettere e rilanciare la conn. per 3 o 4 volte prima che si "svegli" e mi faccia navigare regolarmente... diciamo che ormai ci ho fatto il callo, però se si potesse risolvere risparmierei un sacco di ore internet  :'( (purtroppo i piani dei gestori prevedono l'anticipo dei 15 minuti  (mad) )
poi altra cosina....
come faccio a regolare la luminosità del display ed attivare i tasti "secondari"? (quali: vis. batteria, att/disatt. wlan, e reg lumi display) ??

aiuto  

ditemi che non devo rimettere windows per risolvere.... altrimenti lo lancio dalla finestra sto netbook  (rotfl)

[BrianDJ]

up!

[Pingue_pinguino]

Ciao,
per la connessione vedi se ti carica i DNS; ti basta dare, in un terminale, il comando

Codice: Seleziona tutto

cat /etc/resolv.conf

Se il problema è quello ti basta inserirli staticamente nelle opzioni della connessione che trovi nel network-manager.

Per i tasti funzione, prova a schiacciarne un po, poi, sempre in un terminale, dai il comando dmesg, copi & incoli qua tutto cosa esce. Attento che l'output è lunghissimo, quindi inseriscilo tra i tag code (cancelletto in alto vicino alla macchina da scrivere).

[BrianDJ]

ciao, grazie per la risposta, si mi vanno i dns, xò ho "risolto" lanciando una connessione, e aspettando minimo 30 secondi prima di aprire firefox... (vai a capire xkè...  ??? )
ecco il risultato del comando dmesg

Codice: Seleziona tutto

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-20-generic (buildd@samarium) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #59~ppa3~loms~karmic-Ubuntu SMP Sun Mar 21 10:14:06 UTC 2010 (Ubuntu 2.6.31-20.59~ppa3~loms~karmic-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[    0.000000]  BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003f6d0000 (usable)
[    0.000000]  modified: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[    0.000000]  modified: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[    0.000000]  modified: 000000003f6e3000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 2f212000 - 2f95b7e7
[    0.000000] ACPI: RSDP 000f71a0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 3f6db94a 00084 (v01 SECCSD LH43STAR 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3f6e1bd2 000F4 (v03 INTEL  CALISTGA 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 3f6dd5f2 0456C (v01 INTEL  CALISTGA 06040000 INTL 20050624)
[    0.000000] ACPI: FACS 3f6e2fc0 00040
[    0.000000] ACPI: APIC 3f6e1cc6 00068 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: HPET 3f6e1d2e 00038 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 3f6e1d66 0003C (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: TCPA 3f6e1da2 00032 (v01 PTLTD  CALISTGA 06040000  PTL 00000001)
[    0.000000] ACPI: TMOR 3f6e1dd4 00026 (v01 PTLTD           06040000 PTL  00000003)
[    0.000000] ACPI: APIC 3f6e1dfa 00068 (v01 PTLTD  	 APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 3f6e1e62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 3f6e1e8a 00176 (v01 SECCSD LH43STAR 06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 3f6dcfa3 0064F (v01 SataRe  SataPri 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f6dc907 0069C (v01 SataRe  SataSec 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f6db9ce 004F6 (v02  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008ae060]    TEXT DATA BSS ==> [0000100000 - 00008ae060]
[    0.000000]   #4 [002f212000 - 002f95b7e7]          RAMDISK ==> [002f212000 - 002f95b7e7]
[    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #6 [00008af000 - 00008b21b8]              BRK ==> [00008af000 - 00008b21b8]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00f71d0] f71d0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003f6d0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f6d0
[    0.000000] On node 0 totalpages: 259679
[    0.000000] free_area_init_node: node 0, pgdat c07889a0, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32212 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c17f4000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257649
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=98eb21cf-520e-4ad1-97f7-0ca55953893a ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5195520 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[    0.000000] Memory: 1008788k/1039168k available (4580k kernel code, 29492k reserved, 2144k data, 544k init, 129864k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0792000 - 0xc081a000   ( 544 kB)
[    0.000000]       .data : 0xc0579368 - 0xc07914c8   (2144 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0579368   (4580 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1595.735 MHz processor.
[    0.001841] Console: colour VGA+ 80x25
[    0.001847] console [tty0] enabled
[    0.002101] hpet clockevent registered
[    0.002109] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.002120] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.47 BogoMIPS (lpj=6382940)
[    0.002159] Security Framework initialized
[    0.002197] AppArmor: AppArmor initialized
[    0.002211] Mount-cache hash table entries: 512
[    0.002439] Initializing cgroup subsys ns
[    0.002449] Initializing cgroup subsys cpuacct
[    0.002460] Initializing cgroup subsys memory
[    0.002471] Initializing cgroup subsys freezer
[    0.002476] Initializing cgroup subsys net_cls
[    0.002502] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.002508] CPU: L2 cache: 512K
[    0.002513] CPU: Physical Processor ID: 0
[    0.002517] CPU: Processor Core ID: 0
[    0.002523] mce: CPU supports 5 MCE banks
[    0.002538] CPU0: Thermal monitoring enabled (TM1)
[    0.002546] using mwait in idle threads.
[    0.002557] Performance Counters: Atom events, Intel PMU driver.
[    0.002573] ... version:                 3
[    0.002577] ... bit width:               40
[    0.002581] ... generic counters:        2
[    0.002585] ... value mask:              000000ffffffffff
[    0.002590] ... max period:              000000007fffffff
[    0.002594] ... fixed-purpose counters:  3
[    0.002598] ... counter mask:            0000000700000003
[    0.002607] Checking 'hlt' instruction... OK.
[    0.020013] ACPI: Core revision 20090521
[    0.032529] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072979] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3191.93 BogoMIPS (lpj=6383874)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004000] CPU: L2 cache: 512K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] mce: CPU supports 5 MCE banks
[    0.004000] CPU1: Thermal monitoring enabled (TM1)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.161049] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.161087] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.164038] Brought up 2 CPUs
[    0.164045] Total of 2 processors activated (6383.40 BogoMIPS).
[    0.164114] CPU0 attaching sched-domain:
[    0.164121]  domain 0: span 0-1 level SIBLING
[    0.164126]   groups: 0 1
[    0.164137] CPU1 attaching sched-domain:
[    0.164142]  domain 0: span 0-1 level SIBLING
[    0.164147]   groups: 1 0
[    0.164306] Booting paravirtualized kernel on bare hardware
[    0.164475] regulator: core version 0.5
[    0.164475] Time: 19:34:44  Date: 03/25/10
[    0.164475] NET: Registered protocol family 16
[    0.164475] EISA bus registered
[    0.164475] ACPI: bus type pci registered
[    0.164595] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.164603] PCI: MCFG area at e0000000 reserved in E820
[    0.164607] PCI: Using MMCONFIG for extended config space
[    0.164612] PCI: Using configuration type 1 for base access
[    0.168998] bio: create slab <bio-0> at 0
[    0.169220] ACPI: EC: Look up EC in DSDT
[    0.174250] ACPI: BIOS _OSI(Linux) query ignored
[    0.175934] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.180100] ACPI: Interpreter enabled
[    0.180116] ACPI: (supports S0 S3 S4 S5)
[    0.180163] ACPI: Using IOAPIC for interrupt routing
[    0.188972] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.188972] ACPI: EC: driver started in interrupt mode
[    0.189035] ACPI: Power Resource [FN00] (off)
[    0.189699] ACPI: No dock devices found.
[    0.192178] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.192329] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf007ffff]
[    0.192339] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[    0.192349] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[    0.192358] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0300000-0xf033ffff]
[    0.192413] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0080000-0xf00fffff]
[    0.192557] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0340000-0xf0343fff]
[    0.192635] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.192643] pci 0000:00:1b.0: PME# disabled
[    0.192752] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.192761] pci 0000:00:1c.0: PME# disabled
[    0.192876] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.192884] pci 0000:00:1c.2: PME# disabled
[    0.192971] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.193056] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.193145] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.193230] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[    0.193319] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0544000-0xf05443ff]
[    0.193398] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.193406] pci 0000:00:1d.7: PME# disabled
[    0.193601] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.193610] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.193703] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[    0.193715] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[    0.193728] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[    0.193740] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[    0.193753] pci 0000:00:1f.2: reg 20 io port: [0x1810-0x181f]
[    0.193797] pci 0000:00:1f.2: PME# supported from D3hot
[    0.193806] pci 0000:00:1f.2: PME# disabled
[    0.193876] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[    0.194000] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0100000-0xf010ffff]
[    0.194194] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[    0.194564] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0200000-0xf0203fff]
[    0.194612] pci 0000:03:00.0: reg 18 io port: [0x2000-0x20ff]
[    0.195014] pci 0000:03:00.0: supports D1 D2
[    0.195019] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195047] pci 0000:03:00.0: PME# disabled
[    0.195233] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[    0.195242] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[    0.195324] pci 0000:00:1e.0: transparent bridge
[    0.195366] pci_bus 0000:00: on NUMA node 0
[    0.195376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.195794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.195962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.196175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.206362] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.206555] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.206743] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.206932] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.207118] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.207307] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.207499] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.207687] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.208088] SCSI subsystem initialized
[    0.208171] libata version 3.00 loaded.
[    0.208171] usbcore: registered new interface driver usbfs
[    0.208171] usbcore: registered new interface driver hub
[    0.208171] usbcore: registered new device driver usb
[    0.208171] ACPI: WMI: Mapper loaded
[    0.208171] PCI: Using ACPI for IRQ routing
[    0.220022] Bluetooth: Core ver 2.15
[    0.220067] NET: Registered protocol family 31
[    0.220067] Bluetooth: HCI device and connection manager initialized
[    0.220067] Bluetooth: HCI socket layer initialized
[    0.220067] NetLabel: Initializing
[    0.220067] NetLabel:  domain hash size = 128
[    0.220067] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.220079] NetLabel:  unlabeled traffic allowed by default
[    0.220149] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.220160] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.240027] pnp: PnP ACPI init
[    0.240067] ACPI: bus type pnp registered
[    0.243804] pnp: PnP ACPI: found 11 devices
[    0.243811] ACPI: ACPI bus type pnp unregistered
[    0.243819] PnPBIOS: Disabled by ACPI PNP
[    0.243849] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.243858] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.243865] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.243872] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.243880] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.243887] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.243894] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.243902] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.243917] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.243932] system 00:06: ioport range 0x680-0x69f has been reserved
[    0.243939] system 00:06: ioport range 0x800-0x80f has been reserved
[    0.243946] system 00:06: ioport range 0x1000-0x107f has been reserved
[    0.243954] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    0.243961] system 00:06: ioport range 0x1640-0x164f has been reserved
[    0.243973] system 00:07: ioport range 0x6a0-0x6af has been reserved
[    0.243985] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[    0.278873] AppArmor: AppArmor Filesystem Enabled
[    0.278944] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.278950] pci 0000:00:1c.0:   IO window: disabled
[    0.278961] pci 0000:00:1c.0:   MEM window: 0xf0100000-0xf01fffff
[    0.278969] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.278978] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[    0.278985] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
[    0.278996] pci 0000:00:1c.2:   MEM window: 0xf0200000-0xf02fffff
[    0.279004] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.279013] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.279017] pci 0000:00:1e.0:   IO window: disabled
[    0.279027] pci 0000:00:1e.0:   MEM window: disabled
[    0.279034] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.279057]   alloc irq_desc for 17 on node -1
[    0.279062]   alloc kstat_irqs on node -1
[    0.279074] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.279085] pci 0000:00:1c.0: setting latency timer to 64
[    0.279100]   alloc irq_desc for 18 on node -1
[    0.279104]   alloc kstat_irqs on node -1
[    0.279112] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.279122] pci 0000:00:1c.2: setting latency timer to 64
[    0.279135] pci 0000:00:1e.0: setting latency timer to 64
[    0.279145] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.279151] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.279158] pci_bus 0000:02: resource 1 mem: [0xf0100000-0xf01fffff]
[    0.279165] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
[    0.279171] pci_bus 0000:03: resource 1 mem: [0xf0200000-0xf02fffff]
[    0.279178] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.279184] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.279257] NET: Registered protocol family 2
[    0.279460] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.280126] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.281098] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.281576] TCP: Hash tables configured (established 131072 bind 65536)
[    0.281584] TCP reno registered
[    0.281816] NET: Registered protocol family 1
[    0.281952] Trying to unpack rootfs image as initramfs...
[    0.501176] Switched to high resolution mode on CPU 1
[    0.504056] Switched to high resolution mode on CPU 0
[    0.646130] Freeing initrd memory: 7461k freed
[    0.653204] Simple Boot Flag at 0x36 set to 0x1

[BrianDJ]

seconda parte del code (troppo lungo superavo i 40mila caratteri  ::) )

Codice: Seleziona tutto

[    0.653611] cpufreq-nforce2: No nForce2 chipset.
[    0.653671] Scanning for low memory corruption every 60 seconds
[    0.653893] audit: initializing netlink socket (disabled)
[    0.653923] type=2000 audit(1269545683.652:1): initialized
[    0.671941] highmem bounce pool size: 64 pages
[    0.671954] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.675189] VFS: Disk quotas dquot_6.5.2
[    0.675319] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.676625] fuse init (API version 7.12)
[    0.676809] msgmni has been set to 1732
[    0.677297] alg: No test for stdrng (krng)
[    0.677330] io scheduler noop registered
[    0.677336] io scheduler anticipatory registered
[    0.677340] io scheduler deadline registered
[    0.677451] io scheduler cfq registered (default)
[    0.677477] pci 0000:00:02.0: Boot video device
[    0.677805]   alloc irq_desc for 24 on node -1
[    0.677812]   alloc kstat_irqs on node -1
[    0.677831] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.677849] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.678076]   alloc irq_desc for 25 on node -1
[    0.678081]   alloc kstat_irqs on node -1
[    0.678096] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
[    0.678112] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.678299] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.678461] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.678993] ACPI: AC Adapter [ADP1] (off-line)
[    0.679119] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.679128] ACPI: Power Button [PWRF]
[    0.679264] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.679335] ACPI: Lid Switch [LID0]
[    0.679433] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.679444] ACPI: Power Button [PWRB]
[    0.679543] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.679550] ACPI: Sleep Button [SLPB]
[    0.679736] fan PNP0C0B:00: registered as cooling_device0
[    0.679750] ACPI: Fan [FAN0] (off)
[    0.681002] ACPI: SSDT 3f6dc5ee 00245 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.681908] ACPI: SSDT 3f6dbec4 006A5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.682824] Monitor-Mwait will be used to enter C-1 state
[    0.682915] processor LNXCPU:00: registered as cooling_device1
[    0.682927] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.683714] ACPI: SSDT 3f6dc833 000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.684327] ACPI: SSDT 3f6dc569 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.685494] processor LNXCPU:01: registered as cooling_device2
[    0.685508] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.689840] thermal LNXTHERM:01: registered as thermal_zone0
[    0.689858] ACPI: Thermal Zone [TZ00] (24 C)
[    0.689995] isapnp: Scanning for PnP cards...
[    0.703334] ACPI: Battery Slot [BAT1] (battery present)
[    1.043863] isapnp: No Plug & Play device found
[    1.046672] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.049383] brd: module loaded
[    1.050400] loop: module loaded
[    1.050582] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.050818] ata_piix 0000:00:1f.2: version 2.13
[    1.050852]   alloc irq_desc for 19 on node -1
[    1.050858]   alloc kstat_irqs on node -1
[    1.050872] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.050883] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.204048] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.204197] scsi0 : ata_piix
[    1.204397] scsi1 : ata_piix
[    1.206198] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    1.206206] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    1.206369] ata2: port disabled. ignoring.
[    1.208278] Fixed MDIO Bus: probed
[    1.208359] PPP generic driver version 2.4.2
[    1.208579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.208626]   alloc irq_desc for 23 on node -1
[    1.208632]   alloc kstat_irqs on node -1
[    1.208645] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.208676] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.208684] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.208752] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.208763] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.212687] ehci_hcd 0000:00:1d.7: debug port 1
[    1.212699] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.212728] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0544000
[    1.228027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.228212] usb usb1: configuration #1 chosen from 1 choice
[    1.228277] hub 1-0:1.0: USB hub found
[    1.228293] hub 1-0:1.0: 8 ports detected
[    1.228416] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.228457] uhci_hcd: USB Universal Host Controller Interface driver
[    1.228526] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.228540] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.228548] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.228632] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.228671] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.228834] usb usb2: configuration #1 chosen from 1 choice
[    1.228893] hub 2-0:1.0: USB hub found
[    1.228908] hub 2-0:1.0: 2 ports detected
[    1.228994] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.229007] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.229014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.229083] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.229134] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.229315] usb usb3: configuration #1 chosen from 1 choice
[    1.229375] hub 3-0:1.0: USB hub found
[    1.229390] hub 3-0:1.0: 2 ports detected
[    1.229480] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.229493] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.229500] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.229566] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.229614] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.229777] usb usb4: configuration #1 chosen from 1 choice
[    1.229836] hub 4-0:1.0: USB hub found
[    1.229851] hub 4-0:1.0: 2 ports detected
[    1.229942]   alloc irq_desc for 16 on node -1
[    1.229948]   alloc kstat_irqs on node -1
[    1.229959] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.229971] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.229978] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.230041] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.230090] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.230257] usb usb5: configuration #1 chosen from 1 choice
[    1.230316] hub 5-0:1.0: USB hub found
[    1.230331] hub 5-0:1.0: 2 ports detected
[    1.230521] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.232759] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.233837] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.233852] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.233865] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.233875] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.233886] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.234049] mice: PS/2 mouse device common for all mice
[    1.234391] rtc_cmos 00:08: RTC can wake from S4
[    1.234468] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.234514] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.234768] device-mapper: uevent: version 1.0.3
[    1.234996] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.235173] device-mapper: multipath: version 1.1.0 loaded
[    1.235180] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.235468] EISA: Probing bus 0 at eisa.0
[    1.235481] Cannot allocate resource for EISA slot 1
[    1.235487] Cannot allocate resource for EISA slot 2
[    1.235518] EISA: Detected 0 cards.
[    1.235716] cpuidle: using governor ladder
[    1.235723] cpuidle: using governor menu
[    1.236852] TCP cubic registered
[    1.237248] NET: Registered protocol family 10
[    1.238206] lo: Disabled Privacy Extensions
[    1.238889] NET: Registered protocol family 17
[    1.238933] Bluetooth: L2CAP ver 2.13
[    1.238938] Bluetooth: L2CAP socket layer initialized
[    1.238944] Bluetooth: SCO (Voice Link) ver 0.6
[    1.238948] Bluetooth: SCO socket layer initialized
[    1.239028] Bluetooth: RFCOMM TTY layer initialized
[    1.239036] Bluetooth: RFCOMM socket layer initialized
[    1.239040] Bluetooth: RFCOMM ver 1.11
[    1.240240] Using IPI No-Shortcut mode
[    1.240420] PM: Resume from disk failed.
[    1.240445] registered taskstats version 1
[    1.240651]   Magic number: 2:904:597
[    1.240765] rtc_cmos 00:08: setting system clock to 2010-03-25 19:34:45 UTC (1269545685)
[    1.240772] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.240776] EDD information not available.
[    1.257232] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.430125] ata1.00: ATA-8: WDC WD2500BEVS-00UST0, 01.01A01, max UDMA/133
[    1.430137] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.444698] ata1.00: configured for UDMA/133
[    1.444927] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-0 01.0 PQ: 0 ANSI: 5
[    1.445209] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.445316] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.445450] sd 0:0:0:0: [sda] Write Protect is off
[    1.445457] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.445527] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.445869]  sda: sda1 sda2 < sda5 >
[    1.480289] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.480327] Freeing unused kernel memory: 544k freed
[    1.480814] Write protecting the kernel text: 4584k
[    1.480889] Write protecting the kernel read-only data: 1840k
[    1.545048] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.682583] usb 1-2: configuration #1 chosen from 1 choice
[    1.813176] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[    1.813295] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.913027] usb 1-7: new high speed USB device using ehci_hcd and address 4
[    1.920485] Linux agpgart interface v0.103
[    1.964781] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.965204] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    1.968185] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    2.014949] [drm] Initialized drm 1.1.0 20060810
[    2.045748] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.045762] i915 0000:00:02.0: setting latency timer to 64
[    2.059218] sky2 driver version 1.23
[    2.059369] sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.059430] sky2 0000:03:00.0: setting latency timer to 64
[    2.059555] sky2 0000:03:00.0: Yukon-2 FE+ chip revision 0
[    2.060071]   alloc irq_desc for 26 on node -1
[    2.060078]   alloc kstat_irqs on node -1
[    2.060157] sky2 0000:03:00.0: irq 26 for MSI/MSI-X
[    2.078161] sky2 eth0: addr 00:13:77:f7:55:72
[    2.078551] Initializing USB Mass Storage driver...
[    2.078795] scsi2 : SCSI emulation for USB Mass Storage devices
[    2.091282] usbcore: registered new interface driver usb-storage
[    2.091292] USB Mass Storage support registered.
[    2.091821] usb-storage: device found at 2
[    2.091828] usb-storage: waiting for device to settle before scanning
[    2.093233] usb 1-7: configuration #1 chosen from 1 choice
[    2.216043] usb 1-8: new high speed USB device using ehci_hcd and address 5
[    2.276017] [drm] fb0: inteldrmfb frame buffer device
[    2.276039] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.369154] usb 1-8: configuration #1 chosen from 1 choice
[    2.602699] [drm] LVDS-8: set mode 1024x600 e
[    2.617030] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    2.792651] usb 3-2: configuration #1 chosen from 1 choice
[    3.016822] Console: switching to colour frame buffer device 128x37
[    3.619470] PM: Starting manual resume from disk
[    3.619479] PM: Resume from partition 8:5
[    3.619484] PM: Checking hibernation image.
[    3.619787] PM: Resume from disk failed.
[    3.658282] EXT4-fs (sda1): barriers enabled
[    3.674224] kjournald2 starting: pid 352, dev sda1:8, commit interval 5 seconds
[    3.674357] EXT4-fs (sda1): delayed allocation enabled
[    3.674365] EXT4-fs: file extents enabled
[    3.744730] EXT4-fs: mballoc enabled
[    3.744770] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    4.469753] type=1505 audit(1269545688.728:2): operation="profile_load" pid=377 name=/sbin/dhclient3
[    4.470338] type=1505 audit(1269545688.728:3): operation="profile_load" pid=377 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.470672] type=1505 audit(1269545688.728:4): operation="profile_load" pid=377 name=/usr/lib/connman/scripts/dhclient-script
[    4.511612] type=1505 audit(1269545688.767:5): operation="profile_load" pid=378 name=/usr/bin/evince
[    4.520885] type=1505 audit(1269545688.779:6): operation="profile_load" pid=378 name=/usr/bin/evince-previewer
[    4.526549] type=1505 audit(1269545688.783:7): operation="profile_load" pid=378 name=/usr/bin/evince-thumbnailer
[    4.546219] type=1505 audit(1269545688.803:8): operation="profile_load" pid=380 name=/usr/lib/cups/backend/cups-pdf
[    4.546953] type=1505 audit(1269545688.803:9): operation="profile_load" pid=380 name=/usr/sbin/cupsd
[    7.088283] usb-storage: device scan complete
[    7.089000] scsi 2:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
[    7.089928] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    7.617063] sd 2:0:0:0: [sdb] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB)
[    7.617800] sd 2:0:0:0: [sdb] Write Protect is off
[    7.617808] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    7.617814] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    7.620329] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    7.620339]  sdb: sdb1
[    7.623299] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    7.623307] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   13.022179] udev: starting version 147
[   13.029637] Adding 2980016k swap on /dev/sda5.  Priority:-1 extents:1 across:2980016k 
[   13.063490] lp: driver loaded but no devices found
[   13.336656] cfg80211: Calling CRDA to update world regulatory domain
[   13.424385] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[   13.516883] EXT4-fs (sda1): internal journal on sda1:8
[   13.525574] cfg80211: World regulatory domain updated:
[   13.525586] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.525598] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.525608] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.525617] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.525626] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.525636] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.550721] intel_rng: FWH not detected
[   13.656569] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.656595] ath5k 0000:02:00.0: setting latency timer to 64
[   13.656682] ath5k 0000:02:00.0: registered as 'phy0'
[   13.670873] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   13.671185] usbcore: registered new interface driver btusb
[   13.683630] cdc_acm 1-7:1.0: ttyACM0: USB ACM device
[   13.697201] Linux video capture interface: v2.00
[   13.707786] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c326)
[   13.721630] usbcore: registered new interface driver cdc_acm
[   13.721641] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[   13.766284] input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7
[   13.766432] usbcore: registered new interface driver uvcvideo
[   13.766442] USB Video Class driver (v0.1.0)
[   14.213906] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.226074] ath: EEPROM regdomain: 0x68
[   14.226083] ath: EEPROM indicates we should expect a direct regpair map
[   14.226094] ath: Country alpha2 being used: 00
[   14.226099] ath: Regpair used: 0x68
[   14.380022] phy0: Selected rate control algorithm 'minstrel'
[   14.382204] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   14.511362]   alloc irq_desc for 22 on node -1
[   14.511372]   alloc kstat_irqs on node -1
[   14.511390] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.511470] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.684423] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   14.956827] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.965948] sky2 eth0: enabling interface
[   14.979706] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.027119] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[   15.083394] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   15.351989] __ratelimit: 3 callbacks suppressed
[   15.352048] type=1505 audit(1269545699.607:11): operation="profile_replace" pid=909 name=/sbin/dhclient3
[   15.352891] type=1505 audit(1269545699.611:12): operation="profile_replace" pid=909 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   15.353368] type=1505 audit(1269545699.611:13): operation="profile_replace" pid=909 name=/usr/lib/connman/scripts/dhclient-script
[   15.370966] type=1505 audit(1269545699.627:14): operation="profile_replace" pid=911 name=/usr/bin/evince
[   15.383307] type=1505 audit(1269545699.639:15): operation="profile_replace" pid=911 name=/usr/bin/evince-previewer
[   15.392729] type=1505 audit(1269545699.651:16): operation="profile_replace" pid=911 name=/usr/bin/evince-thumbnailer
[   15.407692] type=1505 audit(1269545699.663:17): operation="profile_replace" pid=920 name=/usr/lib/cups/backend/cups-pdf
[   15.408743] type=1505 audit(1269545699.667:18): operation="profile_replace" pid=920 name=/usr/sbin/cupsd
[   15.415033] type=1505 audit(1269545699.671:19): operation="profile_replace" pid=921 name=/usr/sbin/tcpdump
[   16.751296] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.751308] Bluetooth: BNEP filters: protocol multicast
[   16.781953] Bridge firewalling registered
[   16.905834] ppdev: user-space parallel port driver
[   17.844617] CPU0 attaching NULL sched-domain.
[   17.844629] CPU1 attaching NULL sched-domain.
[   17.857128] CPU0 attaching sched-domain:
[   17.857137]  domain 0: span 0-1 level SIBLING
[   17.857144]   groups: 0 1
[   17.857154]   domain 1: span 0-1 level MC
[   17.857159]    groups: 0-1 (__cpu_power = 2048)
[   17.857171] CPU1 attaching sched-domain:
[   17.857176]  domain 0: span 0-1 level SIBLING
[   17.857181]   groups: 1 0
[   17.857190]   domain 1: span 0-1 level MC
[   17.857195]    groups: 0-1 (__cpu_power = 2048)
[   71.952172] PPP BSD Compression module registered
[   72.016558] PPP Deflate Compression module registered
[  249.795153] Monitor-Mwait will be used to enter C-2 state
[  249.812872] Monitor-Mwait will be used to enter C-3 state
[  249.812926] Marking TSC unstable due to TSC halts in idle

[BrianDJ]

il problema della connessione rimane anche con Ubuntu cavolo.. ma devo tornare a windows per farlo funzionare come si deve e al primo colpo???

[Pingue_pinguino]

Hai controllato che ci siano i DNS nel file /etc/resolv.conf quando la connessione non funziona?